diff mbox series

[v3,7/7] phy: qcom-qmp: qserdes-txrx: Add v7 register offsets

Message ID 20231122-phy-qualcomm-v6-v6-20-v7-new-offsets-v3-7-dfd1c375ef61@linaro.org
State Accepted
Commit ee6fcc0f337d6790b46838bab76c36e8bdd5658e
Headers show
Series [v3,1/7] phy: qcom-qmp: qserdes-com: Add some more v6 register offsets | expand

Commit Message

Abel Vesa Dec. 7, 2023, 12:19 p.m. UTC
The X1E80100 platform bumps the HW version of QMP phy to v7 for USB and PCIE.
Add the new qserdes TX RX offsets in a dedicated header file.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h    | 78 ++++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h                |  1 +
 2 files changed, 79 insertions(+)
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h
new file mode 100644
index 000000000000..91f865b11347
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v7.h
@@ -0,0 +1,78 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V7_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V7_H_
+
+#define QSERDES_V7_TX_CLKBUF_ENABLE				0x08
+#define QSERDES_V7_TX_RESET_TSYNC_EN				0x1c
+#define QSERDES_V7_TX_PRE_STALL_LDO_BOOST_EN			0x20
+#define QSERDES_V7_TX_TX_BAND					0x24
+#define QSERDES_V7_TX_INTERFACE_SELECT				0x2c
+#define QSERDES_V7_TX_RES_CODE_LANE_TX				0x34
+#define QSERDES_V7_TX_RES_CODE_LANE_RX				0x38
+#define QSERDES_V7_TX_RES_CODE_LANE_OFFSET_TX			0x3c
+#define QSERDES_V7_TX_RES_CODE_LANE_OFFSET_RX			0x40
+#define QSERDES_V7_TX_PARRATE_REC_DETECT_IDLE_EN		0x60
+#define QSERDES_V7_TX_BIST_PATTERN7				0x7c
+#define QSERDES_V7_TX_LANE_MODE_1				0x84
+#define QSERDES_V7_TX_LANE_MODE_2				0x88
+#define QSERDES_V7_TX_LANE_MODE_3				0x8c
+#define QSERDES_V7_TX_LANE_MODE_4				0x90
+#define QSERDES_V7_TX_LANE_MODE_5				0x94
+#define QSERDES_V7_TX_RCV_DETECT_LVL_2				0xa4
+#define QSERDES_V7_TX_TRAN_DRVR_EMP_EN				0xc0
+#define QSERDES_V7_TX_TX_INTERFACE_MODE				0xc4
+#define QSERDES_V7_TX_VMODE_CTRL1				0xc8
+#define QSERDES_V7_TX_PI_QEC_CTRL				0xe4
+
+#define QSERDES_V7_RX_UCDR_FO_GAIN				0x08
+#define QSERDES_V7_RX_UCDR_SO_GAIN				0x14
+#define QSERDES_V7_RX_UCDR_FASTLOCK_FO_GAIN			0x30
+#define QSERDES_V7_RX_UCDR_SO_SATURATION_AND_ENABLE		0x34
+#define QSERDES_V7_RX_UCDR_FASTLOCK_COUNT_LOW			0x3c
+#define QSERDES_V7_RX_UCDR_FASTLOCK_COUNT_HIGH			0x40
+#define QSERDES_V7_RX_UCDR_PI_CONTROLS				0x44
+#define QSERDES_V7_RX_UCDR_SB2_THRESH1				0x4c
+#define QSERDES_V7_RX_UCDR_SB2_THRESH2				0x50
+#define QSERDES_V7_RX_UCDR_SB2_GAIN1				0x54
+#define QSERDES_V7_RX_UCDR_SB2_GAIN2				0x58
+#define QSERDES_V7_RX_AUX_DATA_TCOARSE_TFINE			0x60
+#define QSERDES_V7_RX_TX_ADAPT_POST_THRESH			0xcc
+#define QSERDES_V7_RX_VGA_CAL_CNTRL1				0xd4
+#define QSERDES_V7_RX_VGA_CAL_CNTRL2				0xd8
+#define QSERDES_V7_RX_GM_CAL					0xdc
+#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL2			0xec
+#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL3			0xf0
+#define QSERDES_V7_RX_RX_EQU_ADAPTOR_CNTRL4			0xf4
+#define QSERDES_V7_RX_RX_IDAC_TSETTLE_LOW			0xf8
+#define QSERDES_V7_RX_RX_IDAC_TSETTLE_HIGH			0xfc
+#define QSERDES_V7_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1		0x110
+#define QSERDES_V7_RX_SIDGET_ENABLES				0x118
+#define QSERDES_V7_RX_SIGDET_CNTRL				0x11c
+#define QSERDES_V7_RX_SIGDET_DEGLITCH_CNTRL			0x124
+#define QSERDES_V7_RX_RX_MODE_00_LOW				0x15c
+#define QSERDES_V7_RX_RX_MODE_00_HIGH				0x160
+#define QSERDES_V7_RX_RX_MODE_00_HIGH2				0x164
+#define QSERDES_V7_RX_RX_MODE_00_HIGH3				0x168
+#define QSERDES_V7_RX_RX_MODE_00_HIGH4				0x16c
+#define QSERDES_V7_RX_RX_MODE_01_LOW				0x170
+#define QSERDES_V7_RX_RX_MODE_01_HIGH				0x174
+#define QSERDES_V7_RX_RX_MODE_01_HIGH2				0x178
+#define QSERDES_V7_RX_RX_MODE_01_HIGH3				0x17c
+#define QSERDES_V7_RX_RX_MODE_01_HIGH4				0x180
+#define QSERDES_V7_RX_RX_MODE_10_LOW				0x184
+#define QSERDES_V7_RX_RX_MODE_10_HIGH				0x188
+#define QSERDES_V7_RX_RX_MODE_10_HIGH2				0x18c
+#define QSERDES_V7_RX_RX_MODE_10_HIGH3				0x190
+#define QSERDES_V7_RX_RX_MODE_10_HIGH4				0x194
+#define QSERDES_V7_RX_DFE_EN_TIMER				0x1a0
+#define QSERDES_V7_RX_DFE_CTLE_POST_CAL_OFFSET			0x1a4
+#define QSERDES_V7_RX_DCC_CTRL1					0x1a8
+#define QSERDES_V7_RX_VTH_CODE					0x1b0
+#define QSERDES_V7_RX_SIGDET_CAL_CTRL1				0x1e4
+#define QSERDES_V7_RX_SIGDET_CAL_TRIM				0x1f8
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 63b3cbfcb50f..6923496cbfee 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -28,6 +28,7 @@ 
 #include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
 
 #include "phy-qcom-qmp-qserdes-com-v7.h"
+#include "phy-qcom-qmp-qserdes-txrx-v7.h"
 
 #include "phy-qcom-qmp-qserdes-pll.h"