diff mbox series

[v2,2/5] regulator: dt-bindings: qcom,rpmh: add compatible for pm8010

Message ID 20231214-pm8010-regulator-v2-2-82131df6b97b@quicinc.com
State New
Headers show
Series [v2,1/5] regulator: qcom-rpmh: extend to support multiple linear voltage ranges | expand

Commit Message

Fenglin Wu via B4 Relay Dec. 14, 2023, 2:59 a.m. UTC 
From: Fenglin Wu <quic_fenglinw@quicinc.com>

Add compatible for PM8010 RPMH regulators present on sm8550-qrd and
sm8550-mtp boards.

Suggested-by: David Collins <quic_collinsd@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Fenglin Wu <quic_fenglinw@quicinc.com>
---
 .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index acd37f28ef53..27c6d5152413 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -42,6 +42,7 @@  description: |
       For PM7325, smps1 - smps8, ldo1 - ldo19
       For PM8005, smps1 - smps4
       For PM8009, smps1 - smps2, ldo1 - ldo7
+      For PM8010, ldo1 - ldo7
       For PM8150, smps1 - smps10, ldo1 - ldo18
       For PM8150L, smps1 - smps8, ldo1 - ldo11, bob, flash, rgb
       For PM8350, smps1 - smps12, ldo1 - ldo10
@@ -68,6 +69,7 @@  properties:
       - qcom,pm8005-rpmh-regulators
       - qcom,pm8009-rpmh-regulators
       - qcom,pm8009-1-rpmh-regulators
+      - qcom,pm8010-rpmh-regulators
       - qcom,pm8150-rpmh-regulators
       - qcom,pm8150l-rpmh-regulators
       - qcom,pm8350-rpmh-regulators
@@ -238,6 +240,18 @@  allOf:
         "^vdd-l[1-47]-supply$": true
         "^vdd-s[1-2]-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8010-rpmh-regulators
+    then:
+      properties:
+        vdd-l1-l2-supply: true
+        vdd-l3-l4-supply: true
+      patternProperties:
+        "^vdd-l[5-7]-supply$": true
+
   - if:
       properties:
         compatible: