diff mbox series

[08/12] arm64: dts: qcom: sm8250: Hook up GPU cooling device

Message ID 20240102-topic-gpu_cooling-v1-8-fda30c57e353@linaro.org
State Superseded
Headers show
Series Hook up GPU cooling on most qcom arm64 platforms | expand

Commit Message

Konrad Dybcio Jan. 2, 2024, 1:34 p.m. UTC 
In order to allow for throttling the GPU, hook up the cooling device
to the respective thermal zones. Also, update the trip point label
to be more telling, while at it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

Comments

Dmitry Baryshkov Jan. 3, 2024, 1:07 a.m. UTC | #1 
On Tue, 2 Jan 2024 at 15:37, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
> In order to allow for throttling the GPU, hook up the cooling device
> to the respective thermal zones. Also, update the trip point label
> to be more telling, while at it.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 19 +++++++++++++++++--
>  1 file changed, 17 insertions(+), 2 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 760501c1301a..03bf49818798 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2888,6 +2888,7 @@  gpu: gpu@3d00000 {
 
 			nvmem-cells = <&gpu_speed_bin>;
 			nvmem-cell-names = "speed_bin";
+			#cooling-cells = <2>;
 
 			status = "disabled";
 
@@ -6791,8 +6792,15 @@  gpu-top-thermal {
 
 			thermal-sensors = <&tsens0 15>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_top_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu1_alert0: trip-point0 {
+				gpu_top_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";
@@ -6926,8 +6934,15 @@  gpu-bottom-thermal {
 
 			thermal-sensors = <&tsens1 8>;
 
+			cooling-maps {
+				map0 {
+					trip = <&gpu_bottom_alert0>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
 			trips {
-				gpu2_alert0: trip-point0 {
+				gpu_bottom_alert0: trip-point0 {
 					temperature = <90000>;
 					hysteresis = <2000>;
 					type = "hot";