diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index bb961094e41a..b6908a03da58 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -41,16 +41,6 @@
 #include "phy-qcom-qmp-dp-phy-v5.h"
 #include "phy-qcom-qmp-dp-phy-v6.h"
 
-/* QPHY_SW_RESET bit */
-#define SW_RESET				BIT(0)
-/* QPHY_POWER_DOWN_CONTROL */
-#define SW_PWRDN				BIT(0)
-/* QPHY_START_CONTROL bits */
-#define SERDES_START				BIT(0)
-#define PCS_START				BIT(1)
-/* QPHY_PCS_STATUS bit */
-#define PHYSTATUS				BIT(6)
-
 /* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
 /* DP PHY soft reset */
 #define SW_DPPHY_RESET				BIT(0)
@@ -65,17 +55,6 @@
 #define USB3_MODE				BIT(0) /* enables USB3 mode */
 #define DP_MODE					BIT(1) /* enables DP mode */
 
-/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
-#define ARCVR_DTCT_EN				BIT(0)
-#define ALFPS_DTCT_EN				BIT(1)
-#define ARCVR_DTCT_EVENT_SEL			BIT(4)
-
-/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
-#define IRQ_CLEAR				BIT(0)
-
-/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
-#define CLAMP_EN				BIT(0) /* enables i/o clamp_n */
-
 /* QPHY_V3_DP_COM_TYPEC_CTRL register bits */
 #define SW_PORTSELECT_VAL			BIT(0)
 #define SW_PORTSELECT_MUX			BIT(1)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index 07c6f20a49d4..0442b3120563 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -23,17 +23,9 @@
 
 #include "phy-qcom-qmp.h"
 
-/* QPHY_SW_RESET bit */
-#define SW_RESET				BIT(0)
-/* QPHY_POWER_DOWN_CONTROL */
-#define SW_PWRDN				BIT(0)
-#define REFCLK_DRV_DSBL				BIT(1)
 /* QPHY_START_CONTROL bits */
-#define SERDES_START				BIT(0)
-#define PCS_START				BIT(1)
 #define PLL_READY_GATE_EN			BIT(3)
-/* QPHY_PCS_STATUS bit */
-#define PHYSTATUS				BIT(6)
+
 /* QPHY_COM_PCS_READY_STATUS bit */
 #define PCS_READY				BIT(0)
 
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 6119950e455e..5985d019252c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -34,18 +34,6 @@
 #include "phy-qcom-qmp-pcs-pcie-v6_20.h"
 #include "phy-qcom-qmp-pcie-qhp.h"
 
-/* QPHY_SW_RESET bit */
-#define SW_RESET				BIT(0)
-/* QPHY_POWER_DOWN_CONTROL */
-#define SW_PWRDN				BIT(0)
-#define REFCLK_DRV_DSBL				BIT(1)
-/* QPHY_START_CONTROL bits */
-#define SERDES_START				BIT(0)
-#define PCS_START				BIT(1)
-/* QPHY_PCS_STATUS bit */
-#define PHYSTATUS				BIT(6)
-#define PHYSTATUS_4_20				BIT(7)
-
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
 
 /* set of registers with offsets different per-PHY */
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 01a96c60c913..38c4a4cc670a 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -32,13 +32,6 @@
 
 #include "phy-qcom-qmp-qserdes-txrx-ufs-v6.h"
 
-/* QPHY_SW_RESET bit */
-#define SW_RESET				BIT(0)
-/* QPHY_POWER_DOWN_CONTROL */
-#define SW_PWRDN				BIT(0)
-/* QPHY_START_CONTROL bits */
-#define SERDES_START				BIT(0)
-#define PCS_START				BIT(1)
 /* QPHY_PCS_READY_STATUS bit */
 #define PCS_READY				BIT(0)
 
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
index ca220878c630..6d0ba39c1943 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb-legacy.c
@@ -27,16 +27,6 @@
 
 #include "phy-qcom-qmp-dp-com-v3.h"
 
-/* QPHY_SW_RESET bit */
-#define SW_RESET				BIT(0)
-/* QPHY_POWER_DOWN_CONTROL */
-#define SW_PWRDN				BIT(0)
-/* QPHY_START_CONTROL bits */
-#define SERDES_START				BIT(0)
-#define PCS_START				BIT(1)
-/* QPHY_PCS_STATUS bit */
-#define PHYSTATUS				BIT(6)
-
 /* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
 /* DP PHY soft reset */
 #define SW_DPPHY_RESET				BIT(0)
@@ -51,17 +41,6 @@
 #define USB3_MODE				BIT(0) /* enables USB3 mode */
 #define DP_MODE					BIT(1) /* enables DP mode */
 
-/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
-#define ARCVR_DTCT_EN				BIT(0)
-#define ALFPS_DTCT_EN				BIT(1)
-#define ARCVR_DTCT_EVENT_SEL			BIT(4)
-
-/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
-#define IRQ_CLEAR				BIT(0)
-
-/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
-#define CLAMP_EN				BIT(0) /* enables i/o clamp_n */
-
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
 
 struct qmp_phy_init_tbl {
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 02d90850baf2..80071f688671 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -29,41 +29,6 @@
 #include "phy-qcom-qmp-pcs-usb-v6.h"
 #include "phy-qcom-qmp-pcs-usb-v7.h"
 
-/* QPHY_SW_RESET bit */
-#define SW_RESET				BIT(0)
-/* QPHY_POWER_DOWN_CONTROL */
-#define SW_PWRDN				BIT(0)
-/* QPHY_START_CONTROL bits */
-#define SERDES_START				BIT(0)
-#define PCS_START				BIT(1)
-/* QPHY_PCS_STATUS bit */
-#define PHYSTATUS				BIT(6)
-
-/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
-/* DP PHY soft reset */
-#define SW_DPPHY_RESET				BIT(0)
-/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
-#define SW_DPPHY_RESET_MUX			BIT(1)
-/* USB3 PHY soft reset */
-#define SW_USB3PHY_RESET			BIT(2)
-/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
-#define SW_USB3PHY_RESET_MUX			BIT(3)
-
-/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
-#define USB3_MODE				BIT(0) /* enables USB3 mode */
-#define DP_MODE					BIT(1) /* enables DP mode */
-
-/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
-#define ARCVR_DTCT_EN				BIT(0)
-#define ALFPS_DTCT_EN				BIT(1)
-#define ARCVR_DTCT_EVENT_SEL			BIT(4)
-
-/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
-#define IRQ_CLEAR				BIT(0)
-
-/* QPHY_V3_PCS_MISC_CLAMP_ENABLE register bits */
-#define CLAMP_EN				BIT(0) /* enables i/o clamp_n */
-
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
 
 /* set of registers with offsets different per-PHY */
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
index 2de440f0bf02..d316a541f628 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
@@ -28,38 +28,6 @@
 #include "phy-qcom-qmp.h"
 #include "phy-qcom-qmp-pcs-misc-v3.h"
 
-/* QPHY_SW_RESET bit */
-#define SW_RESET				BIT(0)
-/* QPHY_POWER_DOWN_CONTROL */
-#define SW_PWRDN				BIT(0)
-/* QPHY_START_CONTROL bits */
-#define SERDES_START				BIT(0)
-#define PCS_START				BIT(1)
-/* QPHY_PCS_STATUS bit */
-#define PHYSTATUS				BIT(6)
-
-/* QPHY_V3_DP_COM_RESET_OVRD_CTRL register bits */
-/* DP PHY soft reset */
-#define SW_DPPHY_RESET				BIT(0)
-/* mux to select DP PHY reset control, 0:HW control, 1: software reset */
-#define SW_DPPHY_RESET_MUX			BIT(1)
-/* USB3 PHY soft reset */
-#define SW_USB3PHY_RESET			BIT(2)
-/* mux to select USB3 PHY reset control, 0:HW control, 1: software reset */
-#define SW_USB3PHY_RESET_MUX			BIT(3)
-
-/* QPHY_V3_DP_COM_PHY_MODE_CTRL register bits */
-#define USB3_MODE				BIT(0) /* enables USB3 mode */
-#define DP_MODE					BIT(1) /* enables DP mode */
-
-/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
-#define ARCVR_DTCT_EN				BIT(0)
-#define ALFPS_DTCT_EN				BIT(1)
-#define ARCVR_DTCT_EVENT_SEL			BIT(4)
-
-/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
-#define IRQ_CLEAR				BIT(0)
-
 #define PHY_INIT_COMPLETE_TIMEOUT		10000
 
 /* set of registers with offsets different per-PHY */
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index d6a9c9b5ea12..d10b8f653c4b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -50,4 +50,29 @@
 
 #include "phy-qcom-qmp-pcs-v7.h"
 
+/* QPHY_SW_RESET bit */
+#define SW_RESET				BIT(0)
+/* QPHY_POWER_DOWN_CONTROL */
+#define SW_PWRDN				BIT(0)
+#define REFCLK_DRV_DSBL				BIT(1) /* PCIe */
+
+/* QPHY_START_CONTROL bits */
+#define SERDES_START				BIT(0)
+#define PCS_START				BIT(1)
+
+/* QPHY_PCS_STATUS bit */
+#define PHYSTATUS				BIT(6)
+#define PHYSTATUS_4_20				BIT(7)
+
+/* QPHY_PCS_AUTONOMOUS_MODE_CTRL register bits */
+#define ARCVR_DTCT_EN				BIT(0)
+#define ALFPS_DTCT_EN				BIT(1)
+#define ARCVR_DTCT_EVENT_SEL			BIT(4)
+
+/* QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR register bits */
+#define IRQ_CLEAR				BIT(0)
+
+/* QPHY_PCS_MISC_CLAMP_ENABLE register bits */
+#define CLAMP_EN				BIT(0) /* enables i/o clamp_n */
+
 #endif
