diff mbox series

[v2,2/6] firmware: qcom_scm: Add gpu_init_regs call

Message ID 20240426-a750-raytracing-v2-2-562ac9866d63@gmail.com
State Superseded
Headers show
Series drm/msm: Support a750 "software fuse" for raytracing | expand

Commit Message

Connor Abbott April 26, 2024, 6:34 p.m. UTC
This will used by drm/msm.

Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
---
 drivers/firmware/qcom/qcom_scm.c       | 14 ++++++++++++++
 drivers/firmware/qcom/qcom_scm.h       |  3 +++
 include/linux/firmware/qcom/qcom_scm.h | 23 +++++++++++++++++++++++
 3 files changed, 40 insertions(+)

Comments

Konrad Dybcio April 27, 2024, 12:07 p.m. UTC | #1
On 26.04.2024 8:34 PM, Connor Abbott wrote:
> This will used by drm/msm.
> 
> Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
> ---

[...]

> +/**
> + * Request TZ to program set of access controlled registers necessary
> + * irrespective of any features
> + */

kerneldoc abuse, please make it a regular comment

Konrad
diff mbox series

Patch

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 06e46267161b..f8623ad0987c 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -1394,6 +1394,20 @@  int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
 }
 EXPORT_SYMBOL_GPL(qcom_scm_lmh_dcvsh);
 
+int qcom_scm_gpu_init_regs(u32 gpu_req)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_GPU,
+		.cmd = QCOM_SCM_SVC_GPU_INIT_REGS,
+		.arginfo = QCOM_SCM_ARGS(1),
+		.args[0] = gpu_req,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL_GPL(qcom_scm_gpu_init_regs);
+
 static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
 {
 	struct device_node *tcsr;
diff --git a/drivers/firmware/qcom/qcom_scm.h b/drivers/firmware/qcom/qcom_scm.h
index 4532907e8489..484e030bcac9 100644
--- a/drivers/firmware/qcom/qcom_scm.h
+++ b/drivers/firmware/qcom/qcom_scm.h
@@ -138,6 +138,9 @@  int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
 #define QCOM_SCM_WAITQ_RESUME			0x02
 #define QCOM_SCM_WAITQ_GET_WQ_CTX		0x03
 
+#define QCOM_SCM_SVC_GPU			0x28
+#define QCOM_SCM_SVC_GPU_INIT_REGS		0x01
+
 /* common error codes */
 #define QCOM_SCM_V2_EBUSY	-12
 #define QCOM_SCM_ENOMEM		-5
diff --git a/include/linux/firmware/qcom/qcom_scm.h b/include/linux/firmware/qcom/qcom_scm.h
index aaa19f93ac43..2c444c98682e 100644
--- a/include/linux/firmware/qcom/qcom_scm.h
+++ b/include/linux/firmware/qcom/qcom_scm.h
@@ -115,6 +115,29 @@  int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
 int qcom_scm_lmh_profile_change(u32 profile_id);
 bool qcom_scm_lmh_dcvsh_available(void);
 
+/**
+ * Request TZ to program set of access controlled registers necessary
+ * irrespective of any features
+ */
+#define QCOM_SCM_GPU_ALWAYS_EN_REQ BIT(0)
+/**
+ * Request TZ to program BCL id to access controlled register when BCL is
+ * enabled
+ */
+#define QCOM_SCM_GPU_BCL_EN_REQ BIT(1)
+/**
+ * Request TZ to program set of access controlled register for CLX feature
+ * when enabled
+ */
+#define QCOM_SCM_GPU_CLX_EN_REQ BIT(2)
+/**
+ * Request TZ to program tsense ids to access controlled registers for reading
+ * gpu temperature sensors
+ */
+#define QCOM_SCM_GPU_TSENSE_EN_REQ BIT(3)
+
+int qcom_scm_gpu_init_regs(u32 gpu_req);
+
 #ifdef CONFIG_QCOM_QSEECOM
 
 int qcom_scm_qseecom_app_get_id(const char *app_name, u32 *app_id);