diff mbox series

[05/12] arm64: dts: qcom: sm6115-pro1x: Enable SD card slot

Message ID 20240722-qx1050-feature-expansion-v1-5-c4d486435b96@riseup.net
State New
Headers show
Series F(x)tec Pro1X feature expansion | expand

Commit Message

Dang Huynh July 22, 2024, 7:10 a.m. UTC 
Fxtec Pro1X has two card slots and allow either 2xSIM cards or
1xSIM, 1xSD Card configuration.

Signed-off-by: Dang Huynh <danct12@riseup.net>
---
 arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 31 +++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
index 60c046fe8e52..42567545f56d 100644
--- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts
@@ -187,6 +187,7 @@  pm6125_l4a: l4 {
 		pm6125_l5a: l5 {
 			regulator-min-microvolt = <1648000>;
 			regulator-max-microvolt = <3056000>;
+			regulator-allow-set-load;
 		};
 
 		pm6125_l6a: l6 {
@@ -288,6 +289,36 @@  pm6125_l24a: l24 {
 	};
 };
 
+&sdc2_state_off {
+	cd-pins {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_state_on {
+	cd-pins {
+		pins = "gpio88";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_state_on>;
+	pinctrl-1 = <&sdc2_state_off>;
+
+	cd-gpios = <&tlmm 88 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&pm6125_l22a>;
+	vqmmc-supply = <&pm6125_l5a>;
+	status = "okay";
+};
+
 &sleep_clk {
 	clock-frequency = <32764>;
 };