diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 30eb8236c9d8..3def659fc5cb 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -190,6 +190,16 @@ config IPQ_APSS_6018
 	  Say Y if you want to support CPU frequency scaling on
 	  ipq based devices.
 
+config IPQ_CMN_PLL
+	tristate "IPQ CMN PLL Clock Controller"
+	depends on IPQ_GCC_9574
+	help
+	  Support for CMN PLL clock controller on IPQ platform. The
+	  CMN PLL feeds the reference clocks to the Ethernet devices
+	  based on IPQ SoC.
+	  Say Y or M if you want to support CMN PLL clock on the IPQ
+	  based devices.
+
 config IPQ_GCC_4019
 	tristate "IPQ4019 Global Clock Controller"
 	help
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 2b378667a63f..83d11434714c 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
 obj-$(CONFIG_CLK_QCM2290_GPUCC) += gpucc-qcm2290.o
 obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
 obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
+obj-$(CONFIG_IPQ_CMN_PLL) += ipq-cmn-pll.o
 obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
 obj-$(CONFIG_IPQ_GCC_5018) += gcc-ipq5018.o
 obj-$(CONFIG_IPQ_GCC_5332) += gcc-ipq5332.o
diff --git a/drivers/clk/qcom/ipq-cmn-pll.c b/drivers/clk/qcom/ipq-cmn-pll.c
new file mode 100644
index 000000000000..f5ebc7d93ed8
--- /dev/null
+++ b/drivers/clk/qcom/ipq-cmn-pll.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/*
+ * CMN PLL block expects the reference clock from on-board Wi-Fi block,
+ * and supplies fixed rate clocks as output to the networking hardware
+ * blocks and to GCC. The networking related blocks include PPE (packet
+ * process engine), the externally connected PHY or switch devices, and
+ * the PCS.
+ *
+ * On the IPQ9574 SoC, there are three clocks with 50 MHZ and one clock
+ * with 25 MHZ which are output from the CMN PLL to Ethernet PHY (or switch),
+ * and one clock with 353 MHZ to PPE. The other fixed rate output clocks
+ * are supplied to GCC (24 MHZ as XO and 32 KHZ as sleep clock), and to PCS
+ * with 31.25 MHZ.
+ *
+ *               +---------+
+ *               |   GCC   |
+ *               +--+---+--+
+ *           AHB CLK|   |SYS CLK
+ *                  V   V
+ *          +-------+---+------+
+ *          |                  +-------------> eth0-50mhz
+ * REF CLK  |     IPQ9574      |
+ * -------->+                  +-------------> eth1-50mhz
+ *          |  CMN PLL block   |
+ *          |                  +-------------> eth2-50mhz
+ *          |                  |
+ *          +----+----+----+---+-------------> eth-25mhz
+ *               |    |    |
+ *               V    V    V
+ *              GCC  PCS  NSS/PPE
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,ipq-cmn-pll.h>
+
+#define CMN_PLL_REFCLK_SRC_SELECTION		0x28
+#define CMN_PLL_REFCLK_SRC_DIV			GENMASK(9, 8)
+
+#define CMN_PLL_LOCKED				0x64
+#define CMN_PLL_CLKS_LOCKED			BIT(8)
+
+#define CMN_PLL_POWER_ON_AND_RESET		0x780
+#define CMN_ANA_EN_SW_RSTN			BIT(6)
+
+#define CMN_PLL_REFCLK_CONFIG			0x784
+#define CMN_PLL_REFCLK_EXTERNAL			BIT(9)
+#define CMN_PLL_REFCLK_DIV			GENMASK(8, 4)
+#define CMN_PLL_REFCLK_INDEX			GENMASK(3, 0)
+
+#define CMN_PLL_CTRL				0x78c
+#define CMN_PLL_CTRL_LOCK_DETECT_EN		BIT(15)
+
+#define CMN_PLL_DIVIDER_CTRL			0x794
+#define CMN_PLL_DIVIDER_CTRL_FACTOR		GENMASK(9, 0)
+
+/**
+ * struct cmn_pll_fixed_output_clk - CMN PLL output clocks information
+ * @id:	Clock specifier to be supplied
+ * @name: Clock name to be registered
+ * @rate: Clock rate
+ */
+struct cmn_pll_fixed_output_clk {
+	unsigned int id;
+	const char *name;
+	unsigned long rate;
+};
+
+/**
+ * struct clk_cmn_pll - CMN PLL hardware specific data
+ * @regmap: hardware regmap.
+ * @hw: handle between common and hardware-specific interfaces
+ */
+struct clk_cmn_pll {
+	struct regmap *regmap;
+	struct clk_hw hw;
+};
+
+#define CLK_PLL_OUTPUT(_id, _name, _rate) {		\
+	.id =		_id,				\
+	.name =		_name,				\
+	.rate =		_rate,				\
+}
+
+#define to_clk_cmn_pll(_hw) container_of(_hw, struct clk_cmn_pll, hw)
+
+static const struct regmap_config ipq_cmn_pll_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x7fc,
+	.fast_io = true,
+};
+
+static const struct cmn_pll_fixed_output_clk ipq9574_output_clks[] = {
+	CLK_PLL_OUTPUT(XO_24MHZ_CLK, "xo-24mhz", 24000000UL),
+	CLK_PLL_OUTPUT(SLEEP_32KHZ_CLK, "sleep-32khz", 32000UL),
+	CLK_PLL_OUTPUT(PCS_31P25MHZ_CLK, "pcs-31p25mhz", 31250000UL),
+	CLK_PLL_OUTPUT(NSS_1200MHZ_CLK, "nss-1200mhz", 1200000000UL),
+	CLK_PLL_OUTPUT(PPE_353MHZ_CLK, "ppe-353mhz", 353000000UL),
+	CLK_PLL_OUTPUT(ETH0_50MHZ_CLK, "eth0-50mhz", 50000000UL),
+	CLK_PLL_OUTPUT(ETH1_50MHZ_CLK, "eth1-50mhz", 50000000UL),
+	CLK_PLL_OUTPUT(ETH2_50MHZ_CLK, "eth2-50mhz", 50000000UL),
+	CLK_PLL_OUTPUT(ETH_25MHZ_CLK, "eth-25mhz", 25000000UL),
+};
+
+static unsigned long clk_cmn_pll_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct clk_cmn_pll *cmn_pll = to_clk_cmn_pll(hw);
+	u32 val, factor;
+
+	/*
+	 * The value of CMN_PLL_DIVIDER_CTRL_FACTOR is automatically adjusted
+	 * by HW according to the parent clock rate.
+	 */
+	regmap_read(cmn_pll->regmap, CMN_PLL_DIVIDER_CTRL, &val);
+	factor = FIELD_GET(CMN_PLL_DIVIDER_CTRL_FACTOR, val);
+
+	return parent_rate * 2 * factor;
+}
+
+/*
+ * This function is used to initialize the CMN PLL to enable the fixed
+ * rate output clocks. It is expected to be configured once.
+ */
+static int clk_cmn_pll_determine_rate(struct clk_hw *hw,
+				      struct clk_rate_request *req)
+{
+	struct clk_cmn_pll *cmn_pll = to_clk_cmn_pll(hw);
+	u32 val;
+	int ret;
+
+	/*
+	 * Configure the reference input clock selection as per the given
+	 * parent clock. The output clock rates are always of fixed value.
+	 */
+	switch (req->best_parent_rate) {
+	case 25000000:
+		val = 3;
+		break;
+	case 31250000:
+		val = 4;
+		break;
+	case 40000000:
+		val = 6;
+		break;
+	case 50000000:
+		val = 8;
+		break;
+	case 48000000:
+	case 96000000:
+		/*
+		 * Parent clock rate 48 MHZ and 96 MHZ take the same value
+		 * of reference clock index. 96 MHZ needs the source clock
+		 * divider to be programmed as 2.
+		 */
+		val = 7;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(cmn_pll->regmap, CMN_PLL_REFCLK_CONFIG,
+				 CMN_PLL_REFCLK_INDEX,
+				 FIELD_PREP(CMN_PLL_REFCLK_INDEX, val));
+	if (ret)
+		return ret;
+
+	/*
+	 * Update the source clock rate selection and source clock
+	 * divider as 2 when the parent clock rate is 96 MHZ.
+	 */
+	if (req->best_parent_rate == 96000000) {
+		ret = regmap_update_bits(cmn_pll->regmap, CMN_PLL_REFCLK_CONFIG,
+					 CMN_PLL_REFCLK_DIV,
+					 FIELD_PREP(CMN_PLL_REFCLK_DIV, 2));
+		if (ret)
+			return ret;
+
+		ret = regmap_update_bits(cmn_pll->regmap, CMN_PLL_REFCLK_SRC_SELECTION,
+					 CMN_PLL_REFCLK_SRC_DIV,
+					 FIELD_PREP(CMN_PLL_REFCLK_SRC_DIV, 0));
+		if (ret)
+			return ret;
+	}
+
+	/* Enable PLL locked detect. */
+	ret = regmap_update_bits(cmn_pll->regmap, CMN_PLL_CTRL,
+				 CMN_PLL_CTRL_LOCK_DETECT_EN,
+				 CMN_PLL_CTRL_LOCK_DETECT_EN);
+	if (ret)
+		return ret;
+
+	/*
+	 * Reset the CMN PLL block to ensure the updated configurations
+	 * take effect.
+	 */
+	ret = regmap_update_bits(cmn_pll->regmap, CMN_PLL_POWER_ON_AND_RESET,
+				 CMN_ANA_EN_SW_RSTN, 0);
+	if (ret)
+		return ret;
+
+	usleep_range(1000, 1200);
+	ret = regmap_update_bits(cmn_pll->regmap, CMN_PLL_POWER_ON_AND_RESET,
+				 CMN_ANA_EN_SW_RSTN, CMN_ANA_EN_SW_RSTN);
+	if (ret)
+		return ret;
+
+	/* Stability check of CMN PLL output clocks. */
+	return regmap_read_poll_timeout(cmn_pll->regmap, CMN_PLL_LOCKED, val,
+					(val & CMN_PLL_CLKS_LOCKED),
+					100, 100 * USEC_PER_MSEC);
+}
+
+static const struct clk_ops clk_cmn_pll_ops = {
+	.determine_rate = clk_cmn_pll_determine_rate,
+	.recalc_rate = clk_cmn_pll_recalc_rate,
+};
+
+static struct clk_hw *ipq_cmn_pll_clk_hw_register(struct platform_device *pdev)
+{
+	struct clk_parent_data pdata = { .index = 0 };
+	struct device *dev = &pdev->dev;
+	struct clk_init_data init = {};
+	struct clk_cmn_pll *cmn_pll;
+	struct regmap *regmap;
+	void __iomem *base;
+	int ret;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return ERR_CAST(base);
+
+	regmap = devm_regmap_init_mmio(dev, base, &ipq_cmn_pll_regmap_config);
+	if (IS_ERR(regmap))
+		return ERR_CAST(regmap);
+
+	cmn_pll = devm_kzalloc(dev, sizeof(*cmn_pll), GFP_KERNEL);
+	if (!cmn_pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = "cmn_pll";
+	init.parent_data = &pdata;
+	init.num_parents = 1;
+	init.ops = &clk_cmn_pll_ops;
+
+	cmn_pll->hw.init = &init;
+	cmn_pll->regmap = regmap;
+
+	ret = devm_clk_hw_register(dev, &cmn_pll->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return &cmn_pll->hw;
+}
+
+static int ipq_cmn_pll_register_clks(struct platform_device *pdev)
+{
+	const struct cmn_pll_fixed_output_clk *fixed_clk;
+	struct clk_hw_onecell_data *hw_data;
+	struct device *dev = &pdev->dev;
+	struct clk_hw *cmn_pll_hw;
+	unsigned int num_clks;
+	struct clk_hw *hw;
+	int ret, i;
+
+	fixed_clk = ipq9574_output_clks;
+	num_clks = ARRAY_SIZE(ipq9574_output_clks);
+
+	hw_data = devm_kzalloc(dev, struct_size(hw_data, hws, num_clks + 1),
+			       GFP_KERNEL);
+	if (!hw_data)
+		return -ENOMEM;
+
+	/*
+	 * Register the CMN PLL clock, which is the parent clock of
+	 * the fixed rate output clocks.
+	 */
+	cmn_pll_hw = ipq_cmn_pll_clk_hw_register(pdev);
+	if (IS_ERR(cmn_pll_hw))
+		return PTR_ERR(cmn_pll_hw);
+
+	/* Register the fixed rate output clocks. */
+	for (i = 0; i < num_clks; i++) {
+		hw = clk_hw_register_fixed_rate_parent_hw(dev, fixed_clk[i].name,
+							  cmn_pll_hw, 0,
+							  fixed_clk[i].rate);
+		if (IS_ERR(hw)) {
+			ret = PTR_ERR(hw);
+			goto unregister_fixed_clk;
+		}
+
+		hw_data->hws[fixed_clk[i].id] = hw;
+	}
+
+	/*
+	 * Provide the CMN PLL clock. The clock rate of CMN PLL
+	 * is configured to 12 GHZ by DT property assigned-clock-rates-u64.
+	 */
+	hw_data->hws[CMN_PLL_CLK] = cmn_pll_hw;
+	hw_data->num = num_clks + 1;
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, hw_data);
+	if (ret)
+		goto unregister_fixed_clk;
+
+	platform_set_drvdata(pdev, hw_data);
+
+	return 0;
+
+unregister_fixed_clk:
+	while (i > 0)
+		clk_hw_unregister(hw_data->hws[fixed_clk[--i].id]);
+
+	return ret;
+}
+
+static int ipq_cmn_pll_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
+
+	ret = devm_pm_clk_create(dev);
+	if (ret)
+		return ret;
+
+	/*
+	 * To access the CMN PLL registers, the GCC AHB & SYSY clocks
+	 * of CMN PLL block need to be enabled.
+	 */
+	ret = pm_clk_add(dev, "ahb");
+	if (ret)
+		return dev_err_probe(dev, ret, "Fail to add AHB clock\n");
+
+	ret = pm_clk_add(dev, "sys");
+	if (ret)
+		return dev_err_probe(dev, ret, "Fail to add SYS clock\n");
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	/* Register CMN PLL clock and fixed rate output clocks. */
+	ret = ipq_cmn_pll_register_clks(pdev);
+	pm_runtime_put(dev);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Fail to register CMN PLL clocks\n");
+
+	return 0;
+}
+
+static void ipq_cmn_pll_clk_remove(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *hw_data = platform_get_drvdata(pdev);
+	int i;
+
+	/*
+	 * The clock with index CMN_PLL_CLK is unregistered by
+	 * device management.
+	 */
+	for (i = 0; i < hw_data->num; i++) {
+		if (i != CMN_PLL_CLK)
+			clk_hw_unregister(hw_data->hws[i]);
+	}
+}
+
+static const struct dev_pm_ops ipq_cmn_pll_pm_ops = {
+	SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static const struct of_device_id ipq_cmn_pll_clk_ids[] = {
+	{ .compatible = "qcom,ipq9574-cmn-pll", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ipq_cmn_pll_clk_ids);
+
+static struct platform_driver ipq_cmn_pll_clk_driver = {
+	.probe = ipq_cmn_pll_clk_probe,
+	.remove = ipq_cmn_pll_clk_remove,
+	.driver = {
+		.name = "ipq_cmn_pll",
+		.of_match_table = ipq_cmn_pll_clk_ids,
+		.pm = &ipq_cmn_pll_pm_ops,
+	},
+};
+module_platform_driver(ipq_cmn_pll_clk_driver);
+
+MODULE_DESCRIPTION("Qualcomm Technologies, Inc. IPQ CMN PLL Driver");
+MODULE_LICENSE("GPL");
