diff mbox series

[3/3] arm64: dts: qcom: sc8280xp: Add Huawei Matebook E Go (sc8280xp)

Message ID 20241211153754.356476-4-mitltlatltl@gmail.com
State New
Headers show
Series [1/3] dt-bindings: arm: qcom: Document Huawei Matebook E Go (sc8280xp) | expand

Commit Message

Pengyu Luo Dec. 11, 2024, 3:37 p.m. UTC
Add an initial devicetree for the Huawei Matebook E Go, which is based on
sc8280xp.

There are 3 variants, Huawei released first 2 at the same time.
Huawei Matebook E Go LTE(sc8180x), codename should be gaokun2.
Huawei Matebook E Go(sc8280xp@3.0GHz), codename is gaokun3.
Huawei Matebook E Go 2023(sc8280xp@2.69GHz).

We add support for the latter two variants.

This work started by Tianyu Gao and Xuecong Chen, they made the
devicetree based on existing work(i.e. the Lenovo X13s and the
Qualcomm CRD), it can boot with framebuffer.

Original work: https://github.com/matalama80td3l/matebook-e-go-boot-works/blob/main/dts/sc8280xp-huawei-matebook-e-go.dts

Later, I got my device, I continue their work.

Supported features:
- adsp
- bluetooth (connect issue)
- charge (with a lower power)
- framebuffer
- gpu
- keyboard (via internal USB)
- pcie devices (wifi and nvme, no modem)
- speakers and microphones
- tablet mode switch
- touchscreen
- usb
- volume key and power key

Some key features not supported yet:
- battery and charger information report (EC driver required)
- built-in display (cannot enable backlight yet)
- charging thresholds control (EC driver required)
- camera
- LID switch detection (EC driver required)
- USB Type-C altmode (EC driver required)
- USB Type-C PD (EC driver required)

I have finished the EC driver, once this series are upstreamed,
I will submit a series of patches to enable EC support.

Signed-off-by: Tianyu Gao <gty0622@gmail.com>
Signed-off-by: Xuecong Chen <chenxuecong2009@outlook.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |    1 +
 .../boot/dts/qcom/sc8280xp-huawei-gaokun3.dts | 1332 +++++++++++++++++
 2 files changed, 1333 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts

Comments

Konrad Dybcio Dec. 12, 2024, 5:13 p.m. UTC | #1
On 11.12.2024 4:37 PM, Pengyu Luo wrote:
> Add an initial devicetree for the Huawei Matebook E Go, which is based on
> sc8280xp.
> 
> There are 3 variants, Huawei released first 2 at the same time.
> Huawei Matebook E Go LTE(sc8180x), codename should be gaokun2.
> Huawei Matebook E Go(sc8280xp@3.0GHz), codename is gaokun3.
> Huawei Matebook E Go 2023(sc8280xp@2.69GHz).
> 
> We add support for the latter two variants.
> 
> This work started by Tianyu Gao and Xuecong Chen, they made the
> devicetree based on existing work(i.e. the Lenovo X13s and the
> Qualcomm CRD), it can boot with framebuffer.
> 
> Original work: https://github.com/matalama80td3l/matebook-e-go-boot-works/blob/main/dts/sc8280xp-huawei-matebook-e-go.dts
> 
> Later, I got my device, I continue their work.
> 
> Supported features:
> - adsp
> - bluetooth (connect issue)
> - charge (with a lower power)
> - framebuffer
> - gpu
> - keyboard (via internal USB)
> - pcie devices (wifi and nvme, no modem)
> - speakers and microphones
> - tablet mode switch
> - touchscreen
> - usb
> - volume key and power key
> 
> Some key features not supported yet:
> - battery and charger information report (EC driver required)
> - built-in display (cannot enable backlight yet)
> - charging thresholds control (EC driver required)
> - camera
> - LID switch detection (EC driver required)
> - USB Type-C altmode (EC driver required)
> - USB Type-C PD (EC driver required)

Does qcom_battmgr / pmic_glink not work?
> 
> I have finished the EC driver, once this series are upstreamed,
> I will submit a series of patches to enable EC support.
> 
> Signed-off-by: Tianyu Gao <gty0622@gmail.com>
> Signed-off-by: Xuecong Chen <chenxuecong2009@outlook.com>

Your commit message suggests Co-developed-by: tags would also be
fitting here

[...]

> +	chosen {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		framebuffer0: framebuffer@c6200000 {
> +			compatible = "simple-framebuffer";
> +			reg = <0x0 0xC6200000 0x0 0x02400000>;
> +			width = <1600>;
> +			height = <2560>;
> +			stride = <(1600 * 4)>;
> +			format = "a8r8g8b8";
> +		};
> +	};

This should be redundant, as you should have efifb

[...]

> +
> +	wcd938x: audio-codec {
> +		compatible = "qcom,wcd9380-codec";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&wcd_default>;

Please follow this order throughout the file:

property-n
property-names

[...]

> +
> +		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
> +
> +		vdd-buck-supply = <&vreg_s10b>;
> +		vdd-rxtx-supply = <&vreg_s10b>;
> +		vdd-io-supply = <&vreg_s10b>;
> +		vdd-mic-bias-supply = <&vreg_bob>;
> +
> +		qcom,micbias1-microvolt = <1800000>;
> +		qcom,micbias2-microvolt = <1800000>;
> +		qcom,micbias3-microvolt = <1800000>;
> +		qcom,micbias4-microvolt = <1800000>;
> +		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
> +		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
> +		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
> +		qcom,rx-device = <&wcd_rx>;
> +		qcom,tx-device = <&wcd_tx>;
> +
> +		#sound-dai-cells = <1>;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&mode_pin_active>, <&vol_up_n>;
> +
> +		switch-mode {
> +			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;

This could use a label too - "Tablet Mode Switch", perhaps?

> +			linux,input-type = <EV_SW>;
> +			linux,code = <SW_TABLET_MODE>;
> +			debounce-interval = <10>;
> +			wakeup-source;
> +		};
> +
> +		key-vol-up {

Please place this node above the switch-mode one to preserve alphabetical
ordering (see [1])
> +			label = "Volume Up";
> +			gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +			debounce-interval = <15>;
> +			linux,can-disable;
> +			wakeup-source;
> +		};
> +

Stray newline

[...]

> +
> +		/* s2c, s3c */

Please remove such comments

[...]

> +
> +		/* /lib/firmware/ath11k/WCN6855/hw2.1/board-2.bin
> +		 * there is no calibrate data for huawei,
> +		 * but they have the same subsystem-device id
> +		 */
> +		qcom,ath11k-calibration-variant = "LE_X13S";

Oh, this can be taken care of! See [2], [3].

[...]
> +
> +&sound {
> +	compatible = "qcom,sc8280xp-sndcard";
> +	model = "SC8280XP-HUAWEI-MATEBOOKEGO";
> +	audio-routing =
> +		"SpkrLeft IN", "WSA_SPK1 OUT",

Please remove the line break and

> +		"SpkrRight IN", "WSA_SPK2 OUT",
> +		"IN1_HPHL", "HPHL_OUT",
> +		"IN2_HPHR", "HPHR_OUT",
> +		"AMIC2", "MIC BIAS2",
> +		"VA DMIC0", "MIC BIAS1",
> +		"VA DMIC1", "MIC BIAS1",
> +		"VA DMIC2", "MIC BIAS3",
> +		"VA DMIC0", "VA MIC BIAS1",
> +		"VA DMIC1", "VA MIC BIAS1",
> +		"VA DMIC2", "VA MIC BIAS3",
> +		"TX SWR_ADC1", "ADC2_OUTPUT";
> +
> +	wcd-playback-dai-link {
> +		link-name = "WCD Playback";
> +		cpu {

Please insert a newline between the last property and subnodes.

Otherwise looks fairly good!

Konrad

[1] https://docs.kernel.org/devicetree/bindings/dts-coding-style.html
[2] https://lore.kernel.org/ath11k/ZwR1hu-B0bGe4zG7@localhost.localdomain/
[3] https://git.codelinaro.org/clo/ath-firmware/ath11k-firmware
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6ca8db4b8..00d02cf5f 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -195,6 +195,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-lenovo-flex-5g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8180x-primus.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-huawei-gaokun3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-lenovo-thinkpad-x13s.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc8280xp-microsoft-arcata.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sda660-inforce-ifc6560.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
new file mode 100644
index 000000000..98732754e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
@@ -0,0 +1,1332 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ *
+ * Copyright (c) 2024, Tianyu Gao <gty0622@gmail.com>
+ * Copyright (c) 2024, Xuecong Chen <chenxuecong2009@outlook.com>
+ *
+ * Copyright (c) 2024, Pengyu Luo <mitltlatltl@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/phy/phy.h>
+
+#include "sc8280xp.dtsi"
+#include "sc8280xp-pmics.dtsi"
+
+/ {
+	chassis-type = "tablet";
+	model = "Matebook E Go";
+	compatible = "huawei,gaokun3", "qcom,sc8280xp";
+	
+	aliases {
+		i2c4 = &i2c4;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@c6200000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xC6200000 0x0 0x02400000>;
+			width = <1600>;
+			height = <2560>;
+			stride = <(1600 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9380-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_s10b>;
+		vdd-rxtx-supply = <&vreg_s10b>;
+		vdd-io-supply = <&vreg_s10b>;
+		vdd-mic-bias-supply = <&vreg_bob>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mode_pin_active>, <&vol_up_n>;
+
+		switch-mode {
+			gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pmc8280_1_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3B";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC3_SSD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VPH_VCC3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		regulator-always-on;
+	};
+
+	vreg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VCC_WLAN_3R9";
+		regulator-min-microvolt = <3900000>;
+		regulator-max-microvolt = <3900000>;
+
+		gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&hastings_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		gpu_mem: gpu-mem@8bf00000 {
+			reg = <0 0x8bf00000 0 0x2000>;
+			no-map;
+		};
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&bt_default>, <&wlan_en>;
+		pinctrl-names = "default";
+
+		wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_s10b>;
+		vddaon-supply = <&vreg_s12b>;
+		vddpmu-supply = <&vreg_s12b>;
+		vddpmumx-supply = <&vreg_s12b>;
+		vddpmucx-supply = <&vreg_s12b>;
+		vddrfa0p95-supply = <&vreg_s12b>;
+		vddrfa1p3-supply = <&vreg_s11b>;
+		vddrfa1p9-supply = <&vreg_s1c>;
+		vddpcie1p3-supply = <&vreg_s11b>;
+		vddpcie1p9-supply = <&vreg_s1c>;
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-l1-l4-supply = <&vreg_s12b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		vreg_s10b: smps10 {
+			regulator-name = "vreg_s10b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_s11b: smps11 {
+			regulator-name = "vreg_s11b";
+			regulator-min-microvolt = <1272000>;
+			regulator-max-microvolt = <1272000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s12b: smps12 {
+			regulator-name = "vreg_s12b";
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <984000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b: ldo1 {
+			regulator-name = "vreg_l1b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b: ldo2 {
+			regulator-name = "vreg_l2b";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <1904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b: ldo3 {
+			regulator-name = "vreg_l3b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b: ldo4 {
+			regulator-name = "vreg_l4b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b: ldo5 {
+			regulator-name = "vreg_l5b";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b: ldo6 {
+			regulator-name = "vreg_l6b";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b: ldo7 {
+			regulator-name = "vreg_l7b";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-boot-on;
+		};
+
+		vreg_l9b: ldo9 {
+			regulator-name = "vreg_l9b";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-bob-supply = <&vreg_vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1c>;
+		vdd-l2-l8-supply = <&vreg_s1c>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s11b>;
+
+		vreg_s1c: smps1 {
+			regulator-name = "vreg_s1c";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		/* s2c, s3c */
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c: ldo12 {
+			regulator-name = "vreg_l12c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c: ldo13 {
+			regulator-name = "vreg_l13c";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-always-on;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-l4-supply = <&vreg_s11b>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_s11b>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b>;
+		vdd-l8-supply = <&vreg_s12b>;
+
+		/* s10d, s11d, s12d */
+
+		vreg_l2d: ldo2 {
+			regulator-name = "vreg_l2d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d: ldo3 {
+			regulator-name = "vreg_l3d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4d: ldo4 {
+			regulator-name = "vreg_l4d";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6d: ldo6 {
+			regulator-name = "vreg_l6d";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7d: ldo7 {
+			regulator-name = "vreg_l7d";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8d: ldo8 {
+			regulator-name = "vreg_l8d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9d: ldo9 {
+			regulator-name = "vreg_l9d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10d: ldo10 {
+			regulator-name = "vreg_l10d";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&dispcc0 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcdxkmsuc8280.mbn";
+	};
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_default>;
+
+	status = "okay";
+
+	touchscreen@4f {
+		compatible = "hid-over-i2c";
+		reg = <0x4f>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_s10b>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts0_default>;
+
+	};
+
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_0_qmpphy_dp_in>;
+};
+
+&mdss0_dp1 {
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1>;
+	remote-endpoint = <&usb_1_qmpphy_dp_in>;
+};
+
+&pcie2a {
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2a_default>;
+
+	status = "okay";
+};
+
+&pcie2a_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	max-link-speed = <2>;
+
+	perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_wlan>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie4_default>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+		/* /lib/firmware/ath11k/WCN6855/hw2.1/board-2.bin
+		 * there is no calibrate data for huawei,
+		 * but they have the same subsystem-device id
+		 */
+		qcom,ath11k-calibration-variant = "LE_X13S";
+	};
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l6d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&pmk8280_adc_tm {
+	status = "okay";
+
+	sys-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@1 {
+		reg = <1>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@2 {
+		reg = <2>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@3 {
+		reg = <3>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@4 {
+		reg = <4>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@5 {
+		reg = <5>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@6 {
+		reg = <6>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+
+	sys-therm@7 {
+		reg = <7>;
+		io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time-us = <200>;
+		qcom,avg-samples = <2>;
+		qcom,ratiometric;
+	};
+};
+
+&pmk8280_pon_pwrkey {
+	status = "okay";
+};
+
+&pmk8280_pon_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&pmk8280_rtc {
+	nvmem-cells = <&rtc_offset>;
+	nvmem-cell-names = "offset";
+
+	status = "okay";
+};
+
+&pmk8280_sdam_6 {
+	status = "okay";
+
+	rtc_offset: rtc-offset@bc {
+		reg = <0xbc 0x4>;
+	};
+};
+
+&pmk8280_vadc {
+	channel@144 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm1";
+	};
+
+	channel@145 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm2";
+	};
+
+	channel@146 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm3";
+	};
+
+	channel@147 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm4";
+	};
+
+	channel@344 {
+		reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm5";
+	};
+
+	channel@345 {
+		reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm6";
+	};
+
+	channel@346 {
+		reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm7";
+	};
+
+	channel@347 {
+		reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>;
+		qcom,hw-settle-time = <200>;
+		qcom,ratiometric;
+		label = "sys_therm8";
+	};
+};
+
+&qup0 {
+	status = "okay";
+};
+
+&qup1 {
+	status = "okay";
+};
+
+&qup2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcadsp8280.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_nsp0 {
+	firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qccdsp8280.mbn";
+
+	status = "okay";
+};
+
+&rxmacro {
+	status = "okay";
+};
+
+&sound {
+	compatible = "qcom,sc8280xp-sndcard";
+	model = "SC8280XP-HUAWEI-MATEBOOKEGO";
+	audio-routing =
+		"SpkrLeft IN", "WSA_SPK1 OUT",
+		"SpkrRight IN", "WSA_SPK2 OUT",
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"VA DMIC0", "VA MIC BIAS1",
+		"VA DMIC1", "VA MIC BIAS1",
+		"VA DMIC2", "VA MIC BIAS3",
+		"TX SWR_ADC1", "ADC2_OUTPUT";
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		codec {
+			sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+
+		codec {
+			sound-dai = <&vamacro 0>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	left_spkr: wsa8830-left@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_1_sd_n_default>;
+		powerdown-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+
+	right_spkr: wsa8830-right@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&spkr_2_sd_n_default>;
+		powerdown-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		#thermal-sensor-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#sound-dai-cells = <0>;
+		vdd-supply = <&vreg_s10b>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd_rx: wcd9380-rx@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	wcd_tx: wcd9380-tx@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <1 1 2 3>;
+	};
+};
+
+&txmacro {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+
+		max-speed = <3200000>;
+	};
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l9d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l9d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp0_out>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l4b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l13c>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l4b>;
+	vdda-pll-supply = <&vreg_l3b>;
+
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy_dp_in {
+	remote-endpoint = <&mdss0_dp1_out>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l1b>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy1 {
+	vdda-pll-supply = <&vreg_l8d>;
+	vdda18-supply = <&vreg_l1c>;
+	vdda33-supply = <&vreg_l7d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy2 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy3 {
+	vdda-pll-supply = <&vreg_l10d>;
+	vdda18-supply = <&vreg_l8c>;
+	vdda33-supply = <&vreg_l2d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l1b>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy1 {
+	vdda-phy-supply = <&vreg_l8d>;
+	vdda-pll-supply = <&vreg_l4d>;
+
+	status = "okay";
+};
+
+&vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_s10b>;
+
+	qcom,dmic-sample-rate = <4800000>;
+
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sc8280xp/HUAWEI/gaokun3/qcvss8280.mbn";
+	status = "okay";
+};
+
+&wsamacro {
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
+
+/* PINCTRL */
+
+&lpass_tlmm {
+	status = "okay";
+};
+
+&pmc8280_1_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pmr735a_gpios {
+	hastings_reg_en: hastings-reg-en-state {
+		pins = "gpio1";
+		function = "normal";
+	};
+};
+
+&tlmm {
+
+	gpio-reserved-ranges = <70 2>, <74 6>, <83 4>, <125 2>, <128 2>, <154 4>;
+
+	bt_default: bt-default-state {
+		hstp-bt-en-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		hstp-sw-ctrl-pins {
+			pins = "gpio132";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
+	i2c4_default: i2c4-default-state {
+		pins = "gpio171", "gpio172";
+		function = "qup4";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	mode_pin_active: mode-pin-state {
+		pins = "gpio26";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio135";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie2a_default: pcie2a-default-state {
+		clkreq-n-pins {
+			pins = "gpio142";
+			function = "pcie2a_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+		       pins = "gpio145";
+		       function = "gpio";
+		       drive-strength = <2>;
+		       bias-pull-up;
+	       };
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio140";
+			function = "pcie4_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio141";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio139";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	spkr_1_sd_n_default: spkr-1-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	spkr_2_sd_n_default: spkr-2-sd-n-default-state {
+		perst-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio175";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio99";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	uart2_default: uart2-default-state {
+		cts-pins {
+			pins = "gpio121";
+			function = "qup2";
+			bias-bus-hold;
+		};
+
+		rts-pins {
+			pins = "gpio122";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rx-pins {
+			pins = "gpio124";
+			function = "qup2";
+			bias-pull-up;
+		};
+
+		tx-pins {
+			pins = "gpio123";
+			function = "qup2";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	wcd_default: wcd-default-state {
+		reset-pins {
+			pins = "gpio106";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio134";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
+};