From patchwork Fri Feb 7 22:36:29 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Maxime Chevallier X-Patchwork-Id: 863036 Received: from relay3-d.mail.gandi.net (relay3-d.mail.gandi.net [217.70.183.195]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 535831CEAD3; Fri, 7 Feb 2025 22:36:57 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=217.70.183.195 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1738967819; cv=none; b=Cl/4F+Bub2pQ9fKyh6djfV/gfneb5KjWX1d2EwCqYAsCMMFzQTQCWn1wrNZzK5ugTH0SdztXLyhV6kFkTyKejYZDrTDd/Tis+NiBqCtbj1doaIfRNHiPlIEdcS5xGmXz1UXWVq1wMTdxpNzk8pKKQISXb7aOIqkWEJhkrG0tI+o= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1738967819; c=relaxed/simple; bh=x3X1JdAJNfRQ8jthhz14btOIwg5ErxNtmxQmbmMoi9o=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=ZhtNLZBbrny/7kvftod+oxRpfey0+chA1c0WasOKmAJa3emV0OxllxS400mz7LYgUdCKSYdOO0MHxTaCQYrvLimgRkACnUiRh6UaARfCV+FQKEsxOAcn12JYtJaDgi83+O8LbGBwSSV0GWMUp36AffrYORiELpOkcwhS7YPPka8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com; spf=pass smtp.mailfrom=bootlin.com; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b=XsuSK5lp; arc=none smtp.client-ip=217.70.183.195 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=bootlin.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=bootlin.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=bootlin.com header.i=@bootlin.com header.b="XsuSK5lp" Received: by mail.gandi.net (Postfix) with ESMTPSA id 6ADE2204D8; Fri, 7 Feb 2025 22:36:54 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1738967815; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=cwseoUJ9YgPoWsRTF+s9ogmW2Cck1aP648azh/bmxlU=; b=XsuSK5lpInfJcJVBkRNkyujsukxO5r0ix+xMUK4LP0Gz6SheRdjvN3noAy83miIed9uloC yzIYi+3gcGVCMxEztm8rjeF9xtsS2IPivrav0Iey5lFdP6DUw39A5eW0X42C8EvHRy/MbI Y6XynusN9blSwb2uiPz4qF6ne+WM5OkYjXn5i9sTtHeEj1rFzPfnb4yky7uXQF1hS43qwH IrDGSSx+YYiHg4So3wbWz5us4oaMcU6gUPX2BC8do8LP0q7q0G1E9+UzhL0ZtH2qn8Io3v 89fXEzLrJscUXCl4HbrJjDL6zjKYzpqJB8v1Q8aSBfrMQPHNjymvA66xc49+3A== From: Maxime Chevallier To: davem@davemloft.net Cc: Maxime Chevallier , netdev@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, thomas.petazzoni@bootlin.com, Andrew Lunn , Jakub Kicinski , Eric Dumazet , Paolo Abeni , Russell King , linux-arm-kernel@lists.infradead.org, Christophe Leroy , Herve Codina , Florian Fainelli , Heiner Kallweit , Vladimir Oltean , =?utf-8?q?K=C3=B6ry_Maincent?= , =?utf-8?q?Marek?= =?utf-8?q?_Beh=C3=BAn?= , Oleksij Rempel , =?utf-8?q?Nicol=C3=B2_Veronese?= , Simon Horman , mwojtas@chromium.org, Antoine Tenart , devicetree@vger.kernel.org, Conor Dooley , Krzysztof Kozlowski , Rob Herring , Romain Gantois Subject: [PATCH net-next 10/13] net: phy: at803x: Support SFP through phy_port interface Date: Fri, 7 Feb 2025 23:36:29 +0100 Message-ID: <20250207223634.600218-11-maxime.chevallier@bootlin.com> X-Mailer: git-send-email 2.48.1 In-Reply-To: <20250207223634.600218-1-maxime.chevallier@bootlin.com> References: <20250207223634.600218-1-maxime.chevallier@bootlin.com> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-GND-State: clean X-GND-Score: -100 X-GND-Cause: gggruggvucftvghtrhhoucdtuddrgeefvddrtddtgdeftdehtdcutefuodetggdotefrodftvfcurfhrohhfihhlvgemucfitefpfffkpdcuggftfghnshhusghstghrihgsvgenuceurghilhhouhhtmecufedtudenucesvcftvggtihhpihgvnhhtshculddquddttddmnecujfgurhephffvvefufffkofgjfhgggfestdekredtredttdenucfhrhhomhepofgrgihimhgvucevhhgvvhgrlhhlihgvrhcuoehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmqeenucggtffrrghtthgvrhhnpeevgedtffelffelveeuleelgfejfeevvdejhfehgeefgfffvdefteegvedutefftdenucfkphepvdgrtddumegtsgduleemkegugegtmeelfhdttdemtggtfegtmeeglehfgeemfeeiheehmegsheejgeenucevlhhushhtvghrufhiiigvpeeinecurfgrrhgrmhepihhnvghtpedvrgdtudemtggsudelmeekugegtgemlehftddtmegttgeftgemgeelfhegmeefieehheemsgehjeegpdhhvghlohepfhgvughorhgrqddurdhhohhmvgdpmhgrihhlfhhrohhmpehmrgigihhmvgdrtghhvghvrghllhhivghrsegsohhothhlihhnrdgtohhmpdhnsggprhgtphhtthhopedvledprhgtphhtthhopegurghvvghmsegurghvvghmlhhofhhtrdhnvghtpdhrtghpthhtohepmhgrgihimhgvrdgthhgvvhgrlhhlihgvrhessghoohhtlhhinhdrtghomhdprhgtphhtthhopehnvghtuggvvhesvhhgvghrr dhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdhkvghrnhgvlhesvhhgvghrrdhkvghrnhgvlhdrohhrghdprhgtphhtthhopehlihhnuhigqdgrrhhmqdhmshhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepthhhohhmrghsrdhpvghtrgiiiihonhhisegsohhothhlihhnrdgtohhmpdhrtghpthhtoheprghnughrvgifsehluhhnnhdrtghhpdhrtghpthhtohepkhhusggrsehkvghrnhgvlhdrohhrgh X-GND-Sasl: maxime.chevallier@bootlin.com Convert the at803x driver to use the generic phylib SFP handling, via a dedicated .attach_port() callback, populating the supported interfaces. As these devices are limited to 1000BaseX, a workaround is used to also support, in a very limited way, copper modules. This is done by supporting SGMII but limiting it to 1G full duplex (in which case it's somwhat compatible with 1000BaseX). Signed-off-by: Maxime Chevallier --- drivers/net/phy/qcom/at803x.c | 64 ++++++++++------------------------- 1 file changed, 17 insertions(+), 47 deletions(-) diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c index 26350b962890..87145c4b4cbd 100644 --- a/drivers/net/phy/qcom/at803x.c +++ b/drivers/net/phy/qcom/at803x.c @@ -19,7 +19,7 @@ #include #include #include -#include +#include #include #include "qcom.h" @@ -722,58 +722,28 @@ static int at8031_register_regulators(struct phy_device *phydev) return 0; } -static int at8031_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) +static int at8031_attach_port(struct phy_device *phydev, struct phy_port *port) { - struct phy_device *phydev = upstream; - __ETHTOOL_DECLARE_LINK_MODE_MASK(phy_support); - __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support); - DECLARE_PHY_INTERFACE_MASK(interfaces); - phy_interface_t iface; - - linkmode_zero(phy_support); - phylink_set(phy_support, 1000baseX_Full); - phylink_set(phy_support, 1000baseT_Full); - phylink_set(phy_support, Autoneg); - phylink_set(phy_support, Pause); - phylink_set(phy_support, Asym_Pause); - - linkmode_zero(sfp_support); - sfp_parse_support(phydev->sfp_bus, id, sfp_support, interfaces); - /* Some modules support 10G modes as well as others we support. - * Mask out non-supported modes so the correct interface is picked. - */ - linkmode_and(sfp_support, phy_support, sfp_support); - - if (linkmode_empty(sfp_support)) { - dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n"); - return -EINVAL; - } + if (!port->is_serdes) + return 0; - iface = sfp_select_interface(phydev->sfp_bus, sfp_support); + linkmode_zero(port->supported); + phylink_set(port->supported, 1000baseX_Full); + phylink_set(port->supported, 1000baseT_Full); + phylink_set(port->supported, Autoneg); + phylink_set(port->supported, Pause); + phylink_set(port->supported, Asym_Pause); - /* Only 1000Base-X is supported by AR8031/8033 as the downstream SerDes - * interface for use with SFP modules. - * However, some copper modules detected as having a preferred SGMII - * interface do default to and function in 1000Base-X mode, so just - * print a warning and allow such modules, as they may have some chance - * of working. + /* This device doesn't really support SGMII. However, do our best + * to be compatible with copper modules (that usually require SGMII), + * in a degraded mode as we only allow 1000BaseT Full */ - if (iface == PHY_INTERFACE_MODE_SGMII) - dev_warn(&phydev->mdio.dev, "module may not function if 1000Base-X not supported\n"); - else if (iface != PHY_INTERFACE_MODE_1000BASEX) - return -EINVAL; + __set_bit(PHY_INTERFACE_MODE_SGMII, port->interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, port->interfaces); return 0; } -static const struct sfp_upstream_ops at8031_sfp_ops = { - .attach = phy_sfp_attach, - .detach = phy_sfp_detach, - .module_insert = at8031_sfp_insert, - .connect_phy = phy_sfp_connect_phy, - .disconnect_phy = phy_sfp_disconnect_phy, -}; - static int at8031_parse_dt(struct phy_device *phydev) { struct device_node *node = phydev->mdio.dev.of_node; @@ -794,8 +764,7 @@ static int at8031_parse_dt(struct phy_device *phydev) return ret; } - /* Only AR8031/8033 support 1000Base-X for SFP modules */ - return phy_sfp_probe(phydev, &at8031_sfp_ops); + return 0; } static int at8031_probe(struct phy_device *phydev) @@ -1047,6 +1016,7 @@ static struct phy_driver at803x_driver[] = { .set_tunable = at803x_set_tunable, .cable_test_start = at8031_cable_test_start, .cable_test_get_status = at8031_cable_test_get_status, + .attach_port = at8031_attach_port, }, { /* Qualcomm Atheros AR8032 */ PHY_ID_MATCH_EXACT(ATH8032_PHY_ID),