diff mbox series

[v5,4/7] PCI: dwc: Add support for ELBI resource mapping

Message ID 20250309-ecam_v4-v5-4-8eff4b59790d@oss.qualcomm.com
State New
Headers show
Series PCI: dwc: Add ECAM support with iATU configuration | expand

Commit Message

Krishna Chaitanya Chundru March 9, 2025, 5:45 a.m. UTC 
External Local Bus Interface(ELBI) registers are optional registers in
dwc which has vendor specific registers.

As these are part of dwc add the mapping support in dwc itself.

Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
---
 drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++++
 drivers/pci/controller/dwc/pcie-designware.h | 1 +
 2 files changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 145e7f579072..874fd31a6079 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -157,6 +157,15 @@  int dw_pcie_get_resources(struct dw_pcie *pci)
 		}
 	}
 
+	if (!pci->elbi_base) {
+		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
+		if (res) {
+			pci->elbi_base = devm_ioremap_resource(pci->dev, res);
+			if (IS_ERR(pci->elbi_base))
+				return PTR_ERR(pci->elbi_base);
+		}
+	}
+
 	/* LLDD is supposed to manually switch the clocks and resets state */
 	if (dw_pcie_cap_is(pci, REQ_RES)) {
 		ret = dw_pcie_get_clocks(pci);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 501d9ddfea16..3248318d3edd 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -443,6 +443,7 @@  struct dw_pcie {
 	resource_size_t		dbi_phys_addr;
 	void __iomem		*dbi_base2;
 	void __iomem		*atu_base;
+	void __iomem		*elbi_base;
 	resource_size_t		atu_phys_addr;
 	size_t			atu_size;
 	u32			num_ib_windows;