diff mbox series

[01/20] arm64: dts: qcom: sc7280: Use the header with DSI phy clock IDs

Message ID 20250415-drm-msm-dts-fixes-v1-1-90cd91bdd138@oss.qualcomm.com
State New
Headers show
Series arm64: dts: qcom: minor display-related fixups | expand

Commit Message

Dmitry Baryshkov April 15, 2025, 10:25 a.m. UTC 
Use the header with DSI phy clock IDs to make code more readable.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index ec96c917b56b4a077b45ac0186da6aaedb899dbe..d780b5a18cf6472082a87bbbd1900b4ab907eda5 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -6,6 +6,7 @@ 
  */
 #include <dt-bindings/clock/qcom,camcc-sc7280.h>
 #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,gcc-sc7280.h>
 #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
 #include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
@@ -4617,8 +4618,8 @@  dispcc: clock-controller@af00000 {
 			reg = <0 0x0af00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <&mdss_dsi_phy 0>,
-				 <&mdss_dsi_phy 1>,
+				 <&mdss_dsi_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <&mdss_edp_phy 0>,
@@ -4775,8 +4776,10 @@  mdss_dsi: dsi@ae94000 {
 					      "iface",
 					      "bus";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi_phy 0>, <&mdss_dsi_phy 1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC7280_CX>;