diff mbox series

[V4,08/11] phy: qcom-qmp-ufs: refactor qmp_ufs_power_off

Message ID 20250503162440.2954-9-quic_nitirawa@quicinc.com
State New
Headers show
Series Refactor ufs phy powerup sequence | expand

Commit Message

Nitin Rawat May 3, 2025, 4:24 p.m. UTC 
In qmp_ufs_power_off, the PHY is already powered down by asserting
QPHY_PCS_POWER_DOWN_CONTROL. Therefore, additional phy_reset and
stopping SerDes are unnecessary. Also this approach does not
align with the phy HW programming guide.

Thus, refactor qmp_ufs_power_off to remove the phy_reset and stop
SerDes calls to simplify the code and ensure alignment with the PHY
HW programming guide.

Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 7 -------
 1 file changed, 7 deletions(-)

--
2.48.1

Comments

Dmitry Baryshkov May 4, 2025, 3:57 p.m. UTC | #1 
On Sat, May 03, 2025 at 09:54:37PM +0530, Nitin Rawat wrote:
> In qmp_ufs_power_off, the PHY is already powered down by asserting
> QPHY_PCS_POWER_DOWN_CONTROL. Therefore, additional phy_reset and
> stopping SerDes are unnecessary. Also this approach does not
> align with the phy HW programming guide.
> 
> Thus, refactor qmp_ufs_power_off to remove the phy_reset and stop
> SerDes calls to simplify the code and ensure alignment with the PHY
> HW programming guide.
> 
> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 7 -------
>  1 file changed, 7 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
index 2df61ec68dc7..1cbc255c7c74 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
@@ -1826,13 +1826,6 @@  static int qmp_ufs_power_off(struct phy *phy)
 	struct qmp_ufs *qmp = phy_get_drvdata(phy);
 	const struct qmp_phy_cfg *cfg = qmp->cfg;

-	/* PHY reset */
-	if (!cfg->no_pcs_sw_reset)
-		qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
-
-	/* stop SerDes */
-	qphy_clrbits(qmp->pcs, cfg->regs[QPHY_START_CTRL], SERDES_START);
-
 	/* Put PHY into POWER DOWN state: active low */
 	qphy_clrbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
 			SW_PWRDN);