diff mbox series

[v2,2/6] dt-bindings: clock: qcom: ipq5018: remove bindings for XO clock

Message ID 20250506-ipq5018-cmn-pll-v2-2-c0a9fcced114@outlook.com
State New
Headers show
Series Add CMN PLL clock controller support for IPQ5018 | expand

Commit Message

George Moussalem via B4 Relay May 6, 2025, 5:43 a.m. UTC 
From: George Moussalem <george.moussalem@outlook.com>

The XO and its source clock must be always-on and is enabled in the GCC
during probe. As such, remove the bindings for them.

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 include/dt-bindings/clock/qcom,gcc-ipq5018.h | 2 --
 1 file changed, 2 deletions(-)
diff mbox series

Patch

diff --git a/include/dt-bindings/clock/qcom,gcc-ipq5018.h b/include/dt-bindings/clock/qcom,gcc-ipq5018.h
index f3de2fdfeea11f4b8832b75a05e424ca347b3634..d4de5eaffee7b4cb81e0ff2dcbf9e6669c3da8f8 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq5018.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq5018.h
@@ -140,8 +140,6 @@ 
 #define GCC_WCSS_DBG_IFC_NTS_BDG_CLK			131
 #define GCC_WCSS_DBG_IFC_NTS_CLK			132
 #define GCC_WCSS_ECAHB_CLK				133
-#define GCC_XO_CLK					134
-#define GCC_XO_CLK_SRC					135
 #define GMAC0_RX_CLK_SRC				136
 #define GMAC0_TX_CLK_SRC				137
 #define GMAC1_RX_CLK_SRC				138