From patchwork Mon May 10 11:30:03 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 434315 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5E7D0C43460 for ; Mon, 10 May 2021 11:47:31 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 254DD613D6 for ; Mon, 10 May 2021 11:47:31 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235647AbhEJLoY (ORCPT ); Mon, 10 May 2021 07:44:24 -0400 Received: from mail-lf1-f50.google.com ([209.85.167.50]:40844 "EHLO mail-lf1-f50.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236185AbhEJLbS (ORCPT ); Mon, 10 May 2021 07:31:18 -0400 Received: by mail-lf1-f50.google.com with SMTP id c3so22806670lfs.7; Mon, 10 May 2021 04:30:11 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=nljcLRxfvKQmNeJA+p04B9LJ74kQgO1ZTVN6RhAGwQc=; b=lkwPKv2x3Y1lHUqXnGM1gxSgzXn3ykjxeSXCwqbyXoJZx6riYfe9Gc45UOw8Wv0UFG yozd2lIUobd4jhsRADhVNcMm2Mhu+TzPnljy96bj9A/kVUIItim1DRGy5N+N7B/vylxr fJ7V5nffFfYrTZv/Rg5njH1t9frGO91iIiy8BVyzec82kJ/4nHu4Knn2fbOot/qZxDmq ljEIh3Hmhn0JSGglRqBTEn+PG7Qe4WYLmBw7HRK9sXf8KlhNiyjYpb7qDGIw6iKe5a1t 2pdDqIUCOOg307Xlrl7Buyp0AHWrDE+bs94xUgEzUCyaBF4OTtoVoSNlZX07Xxxf2+cO BXFQ== X-Gm-Message-State: AOAM5307madLoMujoy829vYzKyurDQO9KMOqUnl7DvUVRYfBMeiM2Jfj QwYbuw+ivVlBh4Az1tpksHs= X-Google-Smtp-Source: ABdhPJxVZB4tZoVgib8wd2dDz2AVVk/H0QBAE1cWHy5/y8RPUl/+5hua3Eg6wd7KFOAfQ+OFJtyrSQ== X-Received: by 2002:a05:6512:c04:: with SMTP id z4mr16296251lfu.167.1620646210466; Mon, 10 May 2021 04:30:10 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyyby-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::2]) by smtp.gmail.com with ESMTPSA id c26sm310145lfv.63.2021.05.10.04.30.09 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 10 May 2021 04:30:09 -0700 (PDT) Date: Mon, 10 May 2021 14:30:03 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Mark Brown , Kees Cook , Andy Shevchenko , Zhang Rui , Guenter Roeck , "agross@kernel.org" , "devicetree@vger.kernel.org" , linux-power , "linux-kernel@vger.kernel.org" , "linux-renesas-soc@vger.kernel.org" , "linux-arm-msm@vger.kernel.org" , "bjorn.andersson@linaro.org" , "lgirdwood@gmail.com" , "robh+dt@kernel.org" Subject: [PATCH v9 06/10] regulator: add property parsing and callbacks to set protection limits Message-ID: <5def4cd885a7477c457fb265ace97be271cc1478.1620645507.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add DT property parsing code and setting callback for regulator over/under voltage, over-current and temperature error limits. Signed-off-by: Matti Vaittinen --- No changes since RFC-v3 --- drivers/regulator/core.c | 122 +++++++++++++++++++++- drivers/regulator/of_regulator.c | 58 ++++++++++ drivers/regulator/qcom-labibb-regulator.c | 10 +- drivers/regulator/qcom_spmi-regulator.c | 6 +- drivers/regulator/stpmic1_regulator.c | 20 +++- include/linux/regulator/driver.h | 41 +++++++- include/linux/regulator/machine.h | 26 +++++ 7 files changed, 274 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 87f53f5fbbd0..e40cb8c338dc 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1315,6 +1315,52 @@ static int machine_constraints_current(struct regulator_dev *rdev, static int _regulator_do_enable(struct regulator_dev *rdev); +static int notif_set_limit(struct regulator_dev *rdev, + int (*set)(struct regulator_dev *, int, int, bool), + int limit, int severity) +{ + bool enable; + + if (limit == REGULATOR_NOTIF_LIMIT_DISABLE) { + enable = false; + limit = 0; + } else { + enable = true; + } + + if (limit == REGULATOR_NOTIF_LIMIT_ENABLE) + limit = 0; + + return set(rdev, limit, severity, enable); +} + +static int handle_notify_limits(struct regulator_dev *rdev, + int (*set)(struct regulator_dev *, int, int, bool), + struct notification_limit *limits) +{ + int ret = 0; + + if (!set) + return -EOPNOTSUPP; + + if (limits->prot) + ret = notif_set_limit(rdev, set, limits->prot, + REGULATOR_SEVERITY_PROT); + if (ret) + return ret; + + if (limits->err) + ret = notif_set_limit(rdev, set, limits->err, + REGULATOR_SEVERITY_ERR); + if (ret) + return ret; + + if (limits->warn) + ret = notif_set_limit(rdev, set, limits->warn, + REGULATOR_SEVERITY_WARN); + + return ret; +} /** * set_machine_constraints - sets regulator constraints * @rdev: regulator source @@ -1400,9 +1446,27 @@ static int set_machine_constraints(struct regulator_dev *rdev) } } + /* + * Existing logic does not warn if over_current_protection is given as + * a constraint but driver does not support that. I think we should + * warn about this type of issues as it is possible someone changes + * PMIC on board to another type - and the another PMIC's driver does + * not support setting protection. Board composer may happily believe + * the DT limits are respected - especially if the new PMIC HW also + * supports protection but the driver does not. I won't change the logic + * without hearing more experienced opinion on this though. + * + * If warning is seen as a good idea then we can merge handling the + * over-curret protection and detection and get rid of this special + * handling. + */ if (rdev->constraints->over_current_protection && ops->set_over_current_protection) { - ret = ops->set_over_current_protection(rdev); + int lim = rdev->constraints->over_curr_limits.prot; + + ret = ops->set_over_current_protection(rdev, lim, + REGULATOR_SEVERITY_PROT, + true); if (ret < 0) { rdev_err(rdev, "failed to set over current protection: %pe\n", ERR_PTR(ret)); @@ -1410,6 +1474,62 @@ static int set_machine_constraints(struct regulator_dev *rdev) } } + if (rdev->constraints->over_current_detection) + ret = handle_notify_limits(rdev, + ops->set_over_current_protection, + &rdev->constraints->over_curr_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set over current limits: %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested over-current limits\n"); + } + + if (rdev->constraints->over_voltage_detection) + ret = handle_notify_limits(rdev, + ops->set_over_voltage_protection, + &rdev->constraints->over_voltage_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set over voltage limits %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested over voltage limits\n"); + } + + if (rdev->constraints->under_voltage_detection) + ret = handle_notify_limits(rdev, + ops->set_under_voltage_protection, + &rdev->constraints->under_voltage_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set under voltage limits %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested under voltage limits\n"); + } + + if (rdev->constraints->over_temp_detection) + ret = handle_notify_limits(rdev, + ops->set_thermal_protection, + &rdev->constraints->temp_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set temperature limits %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested temperature limits\n"); + } + if (rdev->constraints->active_discharge && ops->set_active_discharge) { bool ad_state = (rdev->constraints->active_discharge == REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false; diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 49f6c05fee34..f54d4f176882 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -21,6 +21,62 @@ static const char *const regulator_states[PM_SUSPEND_MAX + 1] = { [PM_SUSPEND_MAX] = "regulator-state-disk", }; +static void fill_limit(int *limit, int val) +{ + if (val) + if (val == 1) + *limit = REGULATOR_NOTIF_LIMIT_ENABLE; + else + *limit = val; + else + *limit = REGULATOR_NOTIF_LIMIT_DISABLE; +} + +static void of_get_regulator_prot_limits(struct device_node *np, + struct regulation_constraints *constraints) +{ + u32 pval; + int i; + static const char *const props[] = { + "regulator-oc-%s-microamp", + "regulator-ov-%s-microvolt", + "regulator-temp-%s-kelvin", + "regulator-uv-%s-microvolt", + }; + struct notification_limit *limits[] = { + &constraints->over_curr_limits, + &constraints->over_voltage_limits, + &constraints->temp_limits, + &constraints->under_voltage_limits, + }; + bool set[4] = {0}; + + /* Protection limits: */ + for (i = 0; i < ARRAY_SIZE(props); i++) { + char prop[255]; + bool found; + int j; + static const char *const lvl[] = { + "protection", "error", "warn" + }; + int *l[] = { + &limits[i]->prot, &limits[i]->err, &limits[i]->warn, + }; + + for (j = 0; j < ARRAY_SIZE(lvl); j++) { + snprintf(prop, 255, props[i], lvl[j]); + found = !of_property_read_u32(np, prop, &pval); + if (found) + fill_limit(l[j], pval); + set[i] |= found; + } + } + constraints->over_current_detection = set[0]; + constraints->over_voltage_detection = set[1]; + constraints->over_temp_detection = set[2]; + constraints->under_voltage_detection = set[3]; +} + static int of_get_regulation_constraints(struct device *dev, struct device_node *np, struct regulator_init_data **init_data, @@ -188,6 +244,8 @@ static int of_get_regulation_constraints(struct device *dev, constraints->over_current_protection = of_property_read_bool(np, "regulator-over-current-protection"); + of_get_regulator_prot_limits(np, constraints); + for (i = 0; i < ARRAY_SIZE(regulator_states); i++) { switch (i) { case PM_SUSPEND_MEM: diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c index de25e3279b4b..b3da0dc58782 100644 --- a/drivers/regulator/qcom-labibb-regulator.c +++ b/drivers/regulator/qcom-labibb-regulator.c @@ -307,13 +307,21 @@ static irqreturn_t qcom_labibb_ocp_isr(int irq, void *chip) return IRQ_HANDLED; } -static int qcom_labibb_set_ocp(struct regulator_dev *rdev) +static int qcom_labibb_set_ocp(struct regulator_dev *rdev, int lim, + int severity, bool enable) { struct labibb_regulator *vreg = rdev_get_drvdata(rdev); char *ocp_irq_name; u32 irq_flags = IRQF_ONESHOT; int irq_trig_low, ret; + /* + * labibb supports only protection - and does not support setting + * limit. Furthermore, we don't support disabling protection. + */ + if (lim || severity != REGULATOR_SEVERITY_PROT || !enable) + return -EINVAL; + /* If there is no OCP interrupt, there's nothing to set */ if (vreg->ocp_irq <= 0) return -EINVAL; diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index 95677c51c1fa..41424a3366d0 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -595,11 +595,15 @@ static int spmi_regulator_vs_enable(struct regulator_dev *rdev) return regulator_enable_regmap(rdev); } -static int spmi_regulator_vs_ocp(struct regulator_dev *rdev) +static int spmi_regulator_vs_ocp(struct regulator_dev *rdev, int lim_uA, + int severity, bool enable) { struct spmi_regulator *vreg = rdev_get_drvdata(rdev); u8 reg = SPMI_VS_OCP_OVERRIDE; + if (lim_uA || !enable || severity != REGULATOR_SEVERITY_PROT) + return -EINVAL; + return spmi_vreg_write(vreg, SPMI_VS_REG_OCP, ®, 1); } diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c index cf10fdb72e32..2d7597c76e4a 100644 --- a/drivers/regulator/stpmic1_regulator.c +++ b/drivers/regulator/stpmic1_regulator.c @@ -32,7 +32,8 @@ struct stpmic1_regulator_cfg { static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode); static unsigned int stpmic1_get_mode(struct regulator_dev *rdev); -static int stpmic1_set_icc(struct regulator_dev *rdev); +static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity, + bool enable); static unsigned int stpmic1_map_mode(unsigned int mode); enum { @@ -491,11 +492,26 @@ static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode) STPMIC1_BUCK_MODE_LP, value); } -static int stpmic1_set_icc(struct regulator_dev *rdev) +static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity, + bool enable) { struct stpmic1_regulator_cfg *cfg = rdev_get_drvdata(rdev); struct regmap *regmap = rdev_get_regmap(rdev); + /* + * The code seems like one bit in a register controls whether OCP is + * enabled. So we might be able to turn it off here is if that + * was requested. I won't support this because I don't have the HW. + * Feel free to try and implement if you have the HW and need kernel + * to disable this. + * + * Also, I don't know if limit can be configured or if we support + * error/warning instead of protect. So I just keep existing logic + * and assume no. + */ + if (lim || severity != REGULATOR_SEVERITY_PROT || !enable) + return -EINVAL; + /* enable switch off in case of over current */ return regmap_update_bits(regmap, cfg->icc_reg, cfg->icc_mask, cfg->icc_mask); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index be301b28838a..eb979b810639 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -40,6 +40,15 @@ enum regulator_status { REGULATOR_STATUS_UNDEFINED, }; +enum regulator_detection_severity { + /* Hardware shut down voltage outputs if condition is detected */ + REGULATOR_SEVERITY_PROT, + /* Hardware is probably damaged/inoperable */ + REGULATOR_SEVERITY_ERR, + /* Hardware is still recoverable but recovery action must be taken */ + REGULATOR_SEVERITY_WARN, +}; + /* Initialize struct linear_range for regulators */ #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \ { \ @@ -78,8 +87,25 @@ enum regulator_status { * @get_current_limit: Get the configured limit for a current-limited regulator. * @set_input_current_limit: Configure an input limit. * - * @set_over_current_protection: Support capability of automatically shutting - * down when detecting an over current event. + * @set_over_current_protection: Support enabling of and setting limits for over + * current situation detection. Detection can be configured for three + * levels of severity. + * REGULATOR_SEVERITY_PROT should automatically shut down the regulator(s). + * REGULATOR_SEVERITY_ERR should indicate that over-current situation is + * caused by an unrecoverable error but HW does not perform + * automatic shut down. + * REGULATOR_SEVERITY_WARN should indicate situation where hardware is + * still believed to not be damaged but that a board sepcific + * recovery action is needed. If lim_uA is 0 the limit should not + * be changed but the detection should just be enabled/disabled as + * is requested. + * @set_over_voltage_protection: Support enabling of and setting limits for over + * voltage situation detection. Detection can be configured for same + * severities as over current protection. + * @set_under_voltage_protection: Support enabling of and setting limits for + * under situation detection. + * @set_thermal_protection: Support enabling of and setting limits for over + * temperature situation detection. * * @set_active_discharge: Set active discharge enable/disable of regulators. * @@ -143,8 +169,15 @@ struct regulator_ops { int (*get_current_limit) (struct regulator_dev *); int (*set_input_current_limit) (struct regulator_dev *, int lim_uA); - int (*set_over_current_protection) (struct regulator_dev *); - int (*set_active_discharge) (struct regulator_dev *, bool enable); + int (*set_over_current_protection)(struct regulator_dev *, int lim_uA, + int severity, bool enable); + int (*set_over_voltage_protection)(struct regulator_dev *, int lim_uV, + int severity, bool enable); + int (*set_under_voltage_protection)(struct regulator_dev *, int lim_uV, + int severity, bool enable); + int (*set_thermal_protection)(struct regulator_dev *, int lim, + int severity, bool enable); + int (*set_active_discharge)(struct regulator_dev *, bool enable); /* enable/disable regulator */ int (*enable) (struct regulator_dev *); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 8a56f033b6cd..68b4a514a410 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -83,6 +83,14 @@ struct regulator_state { bool changeable; }; +#define REGULATOR_NOTIF_LIMIT_DISABLE -1 +#define REGULATOR_NOTIF_LIMIT_ENABLE -2 +struct notification_limit { + int prot; + int err; + int warn; +}; + /** * struct regulation_constraints - regulator operating constraints. * @@ -100,6 +108,11 @@ struct regulator_state { * @ilim_uA: Maximum input current. * @system_load: Load that isn't captured by any consumer requests. * + * @over_curr_limits: Limits for acting on over current. + * @over_voltage_limits: Limits for acting on over voltage. + * @under_voltage_limits: Limits for acting on under voltage. + * @temp_limits: Limits for acting on over temperature. + * @max_spread: Max possible spread between coupled regulators * @max_uV_step: Max possible step change in voltage * @valid_modes_mask: Mask of modes which may be configured by consumers. @@ -116,6 +129,11 @@ struct regulator_state { * @pull_down: Enable pull down when regulator is disabled. * @over_current_protection: Auto disable on over current event. * + * @over_current_detection: Configure over current limits. + * @over_voltage_detection: Configure over voltage limits. + * @under_voltage_detection: Configure under voltage limits. + * @over_temp_detection: Configure over temperature limits. + * * @input_uV: Input voltage for regulator when supplied by another regulator. * * @state_disk: State for regulator when system is suspended in disk mode. @@ -172,6 +190,10 @@ struct regulation_constraints { struct regulator_state state_disk; struct regulator_state state_mem; struct regulator_state state_standby; + struct notification_limit over_curr_limits; + struct notification_limit over_voltage_limits; + struct notification_limit under_voltage_limits; + struct notification_limit temp_limits; suspend_state_t initial_state; /* suspend state to set at init */ /* mode to set on startup */ @@ -193,6 +215,10 @@ struct regulation_constraints { unsigned soft_start:1; /* ramp voltage slowly */ unsigned pull_down:1; /* pull down resistor when regulator off */ unsigned over_current_protection:1; /* auto disable on over current */ + unsigned over_current_detection:1; /* notify on over current */ + unsigned over_voltage_detection:1; /* notify on over voltage */ + unsigned under_voltage_detection:1; /* notify on under voltage */ + unsigned over_temp_detection:1; /* notify on over temperature */ }; /**