From patchwork Tue Nov 3 12:09:42 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 314362 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-12.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 582F1C4742C for ; Tue, 3 Nov 2020 12:09:50 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id E6B4522264 for ; Tue, 3 Nov 2020 12:09:49 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="lDUD5G3B" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728902AbgKCMJt (ORCPT ); Tue, 3 Nov 2020 07:09:49 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:53788 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728644AbgKCMJt (ORCPT ); Tue, 3 Nov 2020 07:09:49 -0500 Received: from mail-lj1-x243.google.com (mail-lj1-x243.google.com [IPv6:2a00:1450:4864:20::243]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 600FCC0613D1 for ; Tue, 3 Nov 2020 04:09:47 -0800 (PST) Received: by mail-lj1-x243.google.com with SMTP id i2so18794940ljg.4 for ; Tue, 03 Nov 2020 04:09:47 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=wV6Ly4OTVMIHuO3QgeFv/pV+xSUgjDASQ2+fZhKE0+w=; b=lDUD5G3BKbsO7njFX973jlMkuFWjh80WIMfdBSol37Y6t1X0Bb+jVGR1APjJpfXtZD 1GWznh0ZEeQkSOPtWBHJM3b3zwqO+n6tUQaYWSWNUwLWm0+PAaI1ooow9FWkENUow2At HbBICEJVdFfszyoMKS6GHpkglzIfW8knjXi7c6L7pLuLwLsiOs+AdUkdu/Sugyb3DrnK 33EYZaq7FlquURV5ZKFYnZWmdN9Bcqf1qJ4oKLHxYhE2ecCFvGFzK5eRhylmnOLLXoNF 5lzvkU1T+qVcel5YtGr5A0td/tTFYgRoLuItbfGvjICxj0PBG0zmWOQyyfLaHtN13ghy PKvw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=wV6Ly4OTVMIHuO3QgeFv/pV+xSUgjDASQ2+fZhKE0+w=; b=H07a/3aT5eoP891zVCaD65/qNl3KNYosR8zCp4eddd7ugNzPwtNSYlswn7O4Uzdza+ RV+SEkavhoU0JMB/81Eg8ApYbK3jwBe8eGyiBcI0qYTz8NRbKRmU9zBsMSYGtq0H+HAp ItkTtGwYgf0aPTVniHZvMbV4PpZ0yW/mcLjI/yfWg+IuikgkKm7TCbRU/sn/dj/UaPsn MpSobFES5UHpPpERmnsnurWXaFPEDHDDPvBSv0VIeFjCTnF/eUEnsvATDcrvWwtKqaq6 wLDmhwhDT8fPuj/cWZ6idKlrK0wss68twcPbobHBNfNM3LroEDVjnwDpIdkrMlAH8aUZ z/aA== X-Gm-Message-State: AOAM5335x1ERLd9NeuWt6MON97MBqQ42txE+gK9jZ2pKUtKxX/YKPNyq 4egh+YQB7/cod3CN7ZyTteXimg0i4pct00t9 X-Google-Smtp-Source: ABdhPJzP8QkebpLumvWNek0wptLkNxKJKP5M8iwRa97pDBpiEMCZ6DJAVA0MWItt8ZuCfpPOuMyvcQ== X-Received: by 2002:a2e:8350:: with SMTP id l16mr698947ljh.128.1604405385766; Tue, 03 Nov 2020 04:09:45 -0800 (PST) Received: from localhost.bredbandsbolaget (c-92d7225c.014-348-6c756e10.bbcust.telenor.se. [92.34.215.146]) by smtp.gmail.com with ESMTPSA id p18sm4155723ljn.127.2020.11.03.04.09.45 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 03 Nov 2020 04:09:45 -0800 (PST) From: Linus Walleij To: Marcel Holtmann , Johan Hedberg Cc: linux-bluetooth@vger.kernel.org, Linus Walleij , devicetree@vger.kernel.org Subject: [PATCH 1/2] Bluetooth: btbcm: Rewrite bindings i YAML and add reset Date: Tue, 3 Nov 2020 13:09:42 +0100 Message-Id: <20201103120943.1289277-1-linus.walleij@linaro.org> X-Mailer: git-send-email 2.26.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-bluetooth@vger.kernel.org This rewrites the Broadcom bluetooth bindings in YAML and adds a GPIO handle for the BT_RST_N line as used on some platforms. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij --- .../bindings/net/broadcom-bluetooth.txt | 56 --------- .../bindings/net/broadcom-bluetooth.yaml | 117 ++++++++++++++++++ 2 files changed, 117 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/broadcom-bluetooth.txt create mode 100644 Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt deleted file mode 100644 index a7d57ba5f2ac..000000000000 --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt +++ /dev/null @@ -1,56 +0,0 @@ -Broadcom Bluetooth Chips ---------------------- - -This documents the binding structure and common properties for serial -attached Broadcom devices. - -Serial attached Broadcom devices shall be a child node of the host UART -device the slave device is attached to. - -Required properties: - - - compatible: should contain one of the following: - * "brcm,bcm20702a1" - * "brcm,bcm4329-bt" - * "brcm,bcm4330-bt" - * "brcm,bcm43438-bt" - * "brcm,bcm4345c5" - * "brcm,bcm43540-bt" - * "brcm,bcm4335a0" - -Optional properties: - - - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml - - shutdown-gpios: GPIO specifier, used to enable the BT module - - device-wakeup-gpios: GPIO specifier, used to wakeup the controller - - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor. - deprecated, replaced by interrupts and - "host-wakeup" interrupt-names - - clocks: 1 or 2 clocks as defined in clock-names below, in that order - - clock-names: names for clock inputs, matching the clocks given - - "extclk": deprecated, replaced by "txco" - - "txco": external reference clock (not a standalone crystal) - - "lpo": external low power 32.768 kHz clock - - vbat-supply: phandle to regulator supply for VBAT - - vddio-supply: phandle to regulator supply for VDDIO - - brcm,bt-pcm-int-params: configure PCM parameters via a 5-byte array - - sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S - - pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps - - pcm-frame-type: short, long - - pcm-sync-mode: slave, master - - pcm-clock-mode: slave, master - - interrupts: must be one, used to wakeup the host processor - - interrupt-names: must be "host-wakeup" - -Example: - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins>; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - max-speed = <921600>; - brcm,bt-pcm-int-params = [01 02 00 01 01]; - }; -}; diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml new file mode 100644 index 000000000000..bdd6ca617e23 --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.yaml @@ -0,0 +1,117 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/broadcom-bluetooth.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Bluetooth Chips + +maintainers: + - Linus Walleij + +description: + This binding describes Broadcom UART-attached bluetooth chips. + +properties: + compatible: + enum: + - brcm,bcm20702a1 + - brcm,bcm4329-bt + - brcm,bcm4330-bt + - brcm,bcm43438-bt + - brcm,bcm4345c5 + - brcm,bcm43540-bt + - brcm,bcm4335a0 + + shutdown-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_REG_ON used to + power on the BT module + + reset-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_RST_N used to + reset the BT module. This should be marked as + GPIO_ACTIVE_LOW. + + device-wakeup-gpios: + maxItems: 1 + description: GPIO specifier for the line BT_WAKE used to + wakeup the controller. This is using the BT_GPIO_0 + pin on the chip when in use. + + host-wakeup-gpios: + maxItems: 1 + deprecated: true + description: GPIO specifier for the line HOST_WAKE used + to wakeup the host processor. This is using he BT_GPIO_1 + pin on the chip when in use. This is deprecated and replaced + by interrupts and "host-wakeup" interrupt-names + + clocks: + maxItems: 2 + description: 1 or 2 clocks as defined in clock-names below, + in that order + + clock-names: + description: Names of the 1 to 2 supplied clocks + items: + - const: txco + - const: lpo + - const: extclk + + vbat-supply: + description: phandle to regulator supply for VBAT + + vddio-supply: + description: phandle to regulator supply for VDDIO + + brcm,bt-pcm-int-params: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 5 + maxItems: 5 + description: |- + configure PCM parameters via a 5-byte array: + sco-routing: 0 = PCM, 1 = Transport, 2 = Codec, 3 = I2S + pcm-interface-rate: 128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps + pcm-frame-type: short, long + pcm-sync-mode: slave, master + pcm-clock-mode: slave, master + + interrupts: + items: + - description: Handle to the line HOST_WAKE used to wake + up the host processor. This uses the BT_GPIO_1 pin on + the chip when in use. + + interrupt-names: + items: + - const: host-wakeup + + max-speed: true + current-speed: true + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include + #include + + uart { + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + max-speed = <921600>; + brcm,bt-pcm-int-params = [01 02 00 01 01]; + shutdown-gpios = <&gpio 30 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + }; + };