diff mbox series

[v3,6/7] Bluetooth: hci_qca: add power sequencer support to qca6390

Message ID 20210621223141.1638189-7-dmitry.baryshkov@linaro.org
State New
Headers show
Series Add support for Qualcomm QCA639x chips family | expand

Commit Message

Dmitry Baryshkov June 21, 2021, 10:31 p.m. UTC
QCA6390 uses on-chip power sequencer (and power management unit) to
supply power to both WiFi and BT parts. Since this sequencer is
supported by a separate driver, use it as a single "vin" regulator.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/bluetooth/hci_qca.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index bb04da08468a..deea38033248 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1856,7 +1856,10 @@  static const struct qca_device_data qca_soc_data_wcn3998 = {
 
 static const struct qca_device_data qca_soc_data_qca6390 = {
 	.soc_type = QCA_QCA6390,
-	.num_vregs = 0,
+	.vregs = (struct qca_vreg []) {
+		{ "vin", 1000 },
+	},
+	.num_vregs = 1,
 	.capabilities = QCA_CAP_NEEDS_BT_ENABLE,
 	.name = "qca6390",
 };