diff mbox series

[4/4] Bluetooth: btusb: Signal URB errors as TX failure

Message ID 20211109164113.65981-5-benjamin@sipsolutions.net
State New
Headers show
Series [1/4] Bluetooth: Reset more state when cancelling a sync command | expand

Commit Message

Benjamin Berg Nov. 9, 2021, 4:41 p.m. UTC 
From: Benjamin Berg <bberg@redhat.com>

Call the TX failure handler when transmission of URBs fail. This is done
both for failures to send an URB and also when the interrupt URB used to
retrieve a response fails.

This approach is sufficient to quickly deal with certain errors such as
a device being disconnected while synchronous commands are done during
initialization.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
---
 drivers/bluetooth/btusb.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 75c83768c257..0c4fe89c6573 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -924,6 +924,8 @@  static void btusb_intr_complete(struct urb *urb)
 		if (err != -EPERM && err != -ENODEV)
 			bt_dev_err(hdev, "urb %p failed to resubmit (%d)",
 				   urb, -err);
+		if (err != -EPERM)
+			hci_tx_error(hdev, -err);
 		usb_unanchor_urb(urb);
 	}
 }
@@ -967,6 +969,8 @@  static int btusb_submit_intr_urb(struct hci_dev *hdev, gfp_t mem_flags)
 		if (err != -EPERM && err != -ENODEV)
 			bt_dev_err(hdev, "urb %p submission failed (%d)",
 				   urb, -err);
+		if (err != -EPERM)
+			hci_tx_error(hdev, -err);
 		usb_unanchor_urb(urb);
 	}
 
@@ -1322,10 +1326,12 @@  static void btusb_tx_complete(struct urb *urb)
 	if (!test_bit(HCI_RUNNING, &hdev->flags))
 		goto done;
 
-	if (!urb->status)
+	if (!urb->status) {
 		hdev->stat.byte_tx += urb->transfer_buffer_length;
-	else
+	} else {
+		hci_tx_error(hdev, -urb->status);
 		hdev->stat.err_tx++;
+	}
 
 done:
 	spin_lock_irqsave(&data->txlock, flags);
@@ -1348,10 +1354,12 @@  static void btusb_isoc_tx_complete(struct urb *urb)
 	if (!test_bit(HCI_RUNNING, &hdev->flags))
 		goto done;
 
-	if (!urb->status)
+	if (!urb->status) {
 		hdev->stat.byte_tx += urb->transfer_buffer_length;
-	else
+	} else {
+		hci_tx_error(hdev, -urb->status);
 		hdev->stat.err_tx++;
+	}
 
 done:
 	kfree(urb->setup_packet);