diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index bc211c324206..387f7b14461d 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -23,6 +23,20 @@ config BT_MTK
 	tristate
 	select FW_LOADER
 
+config BT_INTEL_PCIE
+	tristate "Intel Bluetooth transport driver for PCIe"
+	depends on PCI
+	select BT_INTEL
+	select FW_LOADER
+	default y
+	help
+	  Intel Bluetooth transport driver for PCIe.
+	  This driver is required if you want to use Intel Bluetooth device
+	  with PCIe interface.
+
+	  Say Y here to compiler support for Intel Bluetooth PCIe device into
+	  the kernel or say M to compile it as module (btintel_pcie)
+
 config BT_HCIBTUSB
 	tristate "HCI USB driver"
 	depends on USB
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 7a5967e9ac48..0730d6684d1a 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
 obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
 
 obj-$(CONFIG_BT_INTEL)		+= btintel.o
+obj-$(CONFIG_BT_INTEL_PCIE)	+= btintel_pcie.o btintel.o
 obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
 obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index 1462a57420a0..5d4685b5c1fa 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -209,7 +209,7 @@ struct btintel_data {
 #define btintel_wait_on_flag_timeout(hdev, nr, m, to)			\
 		wait_on_bit_timeout(btintel_get_flag(hdev), (nr), m, to)
 
-#if IS_ENABLED(CONFIG_BT_INTEL)
+#if IS_ENABLED(CONFIG_BT_INTEL) || IS_ENABLED(CONFIG_BT_INTEL_PCIE)
 
 int btintel_check_bdaddr(struct hci_dev *hdev);
 int btintel_enter_mfg(struct hci_dev *hdev);
diff --git a/drivers/bluetooth/btintel_pcie.c b/drivers/bluetooth/btintel_pcie.c
new file mode 100644
index 000000000000..e6ce2304dc57
--- /dev/null
+++ b/drivers/bluetooth/btintel_pcie.c
@@ -0,0 +1,1317 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Intel Bluetooth PCIE driver
+ *
+ * Copyright (C) 2017 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2022  Intel Corporation
+ *
+ * Intel Bluetooth Driver for PCIE interface.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/pci.h>
+#include <linux/wait.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btintel.h"
+#include "btintel_pcie.h"
+
+#define VERSION "0.1"
+
+#define BTINTEL_PCI_DEVICE(dev, subdev)	\
+	.vendor = PCI_VENDOR_ID_INTEL,	\
+	.device = (dev),		\
+	.subvendor = PCI_ANY_ID,	\
+	.subdevice = (subdev),		\
+	.driver_data = 0
+
+/* Intel Bluetooth PCIe device id table */
+static const struct pci_device_id btintel_pcie_table[] = {
+	{ BTINTEL_PCI_DEVICE(0xA876, PCI_ANY_ID) },
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(pci, btintel_pcie_table);
+
+/* Intel PCIe uses 4 bytes of HCI type instead of 1 byte BT SIG HCI type */
+#define BTINTEL_PCIE_HCI_TYPE_LEN	4
+#define BTINTEL_PCIE_HCI_CMD_PKT	0x00000001
+#define BTINTEL_PCIE_HCI_ACL_PKT	0x00000002
+#define BTINTEL_PCIE_HCI_SCO_PKT	0x00000003
+#define BTINTEL_PCIE_HCI_EVT_PKT	0x00000004
+
+#define BTITNEL_PCIE_ENABLE_HCI_DUMP	0
+
+#if BTITNEL_PCIE_ENABLE_HCI_DUMP
+static inline void btintel_pcie_hci_dump(const char *p, const void *b, int s)
+{
+	const unsigned char *ptr = (const unsigned char *)b;
+	char str[64];
+	int c, i;
+
+	for (i = c = 0; c < s; c++) {
+		i += snprintf(str + i, sizeof(str) - i, "%02x ", ptr[c]);
+		if ((c > 0 && (c + 1) % 8 == 0) || (c == s - 1)) {
+			BT_DBG("%s: %s", p, str);
+			i = 0;
+		}
+	}
+}
+#else
+static inline void btintel_pcie_hci_dump(const char *p, const void *b, int s)
+{
+}
+#endif
+
+static void ipc_print_ia_ring(struct ia *ia, u16 queue_num)
+{
+	BT_DBG("[%s] ---------------- ia ----------------",
+	       queue_num == TXQ_NUM ? "TXQ" : "RXQ");
+	BT_DBG("[%s] tr-h:%02u  tr-t:%02u  cr-h:%02u  cr-t:%02u",
+	       queue_num == TXQ_NUM ? "TXQ" : "RXQ",
+	       ia->tr_hia[queue_num], ia->tr_tia[queue_num],
+	       ia->cr_hia[queue_num], ia->cr_tia[queue_num]);
+}
+
+static void ipc_print_urbd0(struct urbd0 *urbd0, u16 index)
+{
+	BT_DBG("[TXQ] -------------- urbd0[%u] --------------", index);
+	BT_DBG("[TXQ] tfd_index:%u num_txq:%u cmpl_cnt:%u immediate_cmpl:0x%x",
+	       urbd0->tfd_index, urbd0->num_txq, urbd0->cmpl_count,
+	       urbd0->immediate_cmpl);
+}
+
+static void ipc_print_frbd(struct frbd *frbd, u16 index)
+{
+	BT_DBG("[RXQ] -------------- frbd[%u] --------------", index);
+	BT_DBG("[RXQ] tag:%u addr:0x%llx", frbd->tag, frbd->addr);
+}
+
+static void ipc_print_urbd1(struct urbd1 *urbd1, u16 index)
+{
+	BT_DBG("[RXQ] -------------- urbd1[%u] --------------", index);
+	BT_DBG("[RXQ] frbd_tag:%u status: 0x%x fixed:0x%x",
+	       urbd1->frbd_tag, urbd1->status, urbd1->fixed);
+}
+
+/* Poll internal in microseconds */
+#define POLL_INTERVAL			10
+
+static int btintel_pcie_poll_bit(struct btintel_pcie_data *data, u32 offset,
+				 u32 bits, u32 mask, int timeout)
+{
+	int t = 0;
+	u32 reg;
+
+	BT_DBG("Enter poll_bit");
+	do {
+		reg = btintel_pcie_rd_reg32(data, offset);
+		BT_DBG("CURRENT FUNC_CTRL_REG: 0x%x", reg);
+
+		if ((reg & mask) == (bits & mask)) {
+			BT_DBG("Poll bit matched");
+			return t;
+		}
+		udelay(POLL_INTERVAL);
+		t += POLL_INTERVAL;
+		BT_DBG("Poll wait: %d", t);
+	} while (t < timeout);
+
+	return -ETIMEDOUT;
+}
+
+static struct btintel_pcie_data *btintel_pcie_get_data(struct msix_entry *entry)
+{
+	u8 queue = entry->entry;
+	struct msix_entry *entries = entry - queue;
+
+	return container_of(entries, struct btintel_pcie_data, msix_entries[0]);
+}
+
+/* Set the doorbell for RXQ to notify the device that @index(actually index-1)
+ * is available to receive the data
+ */
+static void btintel_pcie_set_rx_db(struct btintel_pcie_data *data, u16 index)
+{
+	u32 val;
+
+	val = index;
+	val |= (513 << 16);
+
+	BT_DBG("[RXQ] Set doorbell for index: %u", index);
+	btintel_pcie_wr_reg32(data, CSR_HBUS_TARG_WRPTR, val);
+}
+
+/* Update the FRBD(free buffer descriptor) with the @frbd_index and the
+ * DMA address of the free buffer.
+ */
+static void btintel_pcie_prepare_rx(struct rxq *rxq, u16 frbd_index)
+{
+	struct data_buf *buf;
+	struct frbd *frbd;
+
+	/* Get the buffer of the frbd for DMA */
+	buf = &rxq->bufs[frbd_index];
+
+	frbd = &rxq->frbds[frbd_index];
+	memset(frbd, 0, sizeof(*frbd));
+
+	/* Update FRBD */
+	frbd->tag = frbd_index;
+	frbd->addr = buf->data_p_addr;
+	ipc_print_frbd(frbd, frbd_index);
+}
+
+static int btintel_pcie_submit_rx(struct btintel_pcie_data *data)
+{
+	u16 frbd_index;
+	struct rxq *rxq = &data->rxq;
+
+	/* Read the frbd index from the TR_HIA(Head Index Array) for RXQ */
+	frbd_index = data->ia.tr_hia[RXQ_NUM];
+	BT_DBG("[RXQ] current frbd_index: %u", frbd_index);
+
+	/* Make sure the index value is within the range. It shouldn't be
+	 * bigger than the total count of the queue.
+	 */
+	if (frbd_index > rxq->count) {
+		BT_ERR("[RXQ] RXQ out of range: (0x%x)", frbd_index);
+		return -ERANGE;
+	}
+
+	/* Prepare for RX submit. It updates the FRBD with the address of DMA
+	 * buffer
+	 */
+	btintel_pcie_prepare_rx(rxq, frbd_index);
+
+	/* Update TR_HIA with new FRBD index */
+	frbd_index = (frbd_index + 1) % rxq->count;
+	data->ia.tr_hia[RXQ_NUM] = frbd_index;
+	ipc_print_ia_ring(&data->ia, RXQ_NUM);
+
+	/* Set the doorbell to notify the device */
+	btintel_pcie_set_rx_db(data, frbd_index);
+
+	BT_DBG("[RXQ] rx sumbit completed");
+
+	return 0;
+}
+
+static int btintel_pcie_start_rx(struct btintel_pcie_data *data)
+{
+	int i, ret;
+
+	for (i = 0; i < RX_MAX_QUEUE; i++) {
+		ret = btintel_pcie_submit_rx(data);
+		if (ret) {
+			BT_ERR("[RXQ] failed to submit frbd(%d)", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static void btintel_pcie_reset_ia(struct btintel_pcie_data *data)
+{
+	memset(data->ia.tr_hia, 0, sizeof(u16) * NUM_QUEUES);
+	memset(data->ia.tr_tia, 0, sizeof(u16) * NUM_QUEUES);
+	memset(data->ia.cr_hia, 0, sizeof(u16) * NUM_QUEUES);
+	memset(data->ia.cr_tia, 0, sizeof(u16) * NUM_QUEUES);
+	BT_DBG("Index Arrays are reset");
+}
+
+static void btintel_pcie_reset_bt(struct btintel_pcie_data *data)
+{
+	BT_INFO("Reset BT Function ");
+	btintel_pcie_wr_reg32(data, CSR_FUNC_CTRL_REG, CSR_FUNC_CTRL_SW_RESET);
+}
+
+/* This function enables BT function by setting CSR_FUNC_CTRL_MAC_INIT bit in
+ * CSR_FUNC_CTRL_REG register and wait for MSI-X with MSIX_HW_INT_CAUSES_GP0.
+ * Then the host reads firmware version from CSR_F2D_MBX and the boot stage
+ * from CSR_BOOT_STAGE_REG.
+ */
+static int btintel_pcie_enable_bt(struct btintel_pcie_data *data)
+{
+	int err;
+	u32 reg;
+
+	data->gp0_received = false;
+
+	/* Update the DMA address of CI struct to CSR */
+	btintel_pcie_wr_reg32(data, CSR_CI_ADDR_LSB_REG,
+			      data->ci_p_addr & 0xffffffff);
+	btintel_pcie_wr_reg32(data, CSR_CI_ADDR_MSB_REG,
+			      data->ci_p_addr >> 32);
+
+	/* Reset the cached value of boot stage. it is updated by the msix
+	 * gp0 interrupt handler.
+	 */
+	data->boot_stage_cache = 0x0;
+
+	/* Set MAC_INIT bit to start primary bootloader */
+	reg = btintel_pcie_rd_reg32(data, CSR_FUNC_CTRL_REG);
+	BT_INFO("Before: FUNC_CTRL_REG: 0x%x", reg);
+
+	btintel_pcie_set_reg_bits(data, CSR_FUNC_CTRL_REG,
+				  CSR_FUNC_CTRL_MAC_INIT);
+	BT_INFO("MAC_INIT is set");
+
+	/* Wait until MAC_ACCESS is granted */
+	err = btintel_pcie_poll_bit(data, CSR_FUNC_CTRL_REG,
+				    CSR_FUNC_CTRL_MAC_ACCESS_STS,
+				    CSR_FUNC_CTRL_MAC_ACCESS_STS,
+				    DEFAULT_MAC_ACCESS_TIMEOUT);
+	if (err < 0) {
+		BT_ERR("Failed to start bootloader even after %u ns",
+		       DEFAULT_MAC_ACCESS_TIMEOUT);
+		return -ENODEV;
+	}
+
+	/* MAC is ready. Enable BT FUNC */
+	btintel_pcie_set_reg_bits(data, CSR_FUNC_CTRL_REG,
+				  CSR_FUNC_CTRL_FUNC_ENA |
+				  CSR_FUNC_CTRL_FUNC_INIT);
+
+	reg = btintel_pcie_rd_reg32(data, CSR_FUNC_CTRL_REG);
+	BT_INFO("After: FUNC_CTRL_REG: 0x%x", reg);
+
+	/* wait for interrupt from the device after booting up to primary
+	 * bootloader.
+	 */
+	err = wait_event_timeout(data->gp0_wait_q, data->gp0_received,
+				 msecs_to_jiffies(DEFAULT_INTR_TIMEOUT));
+	if (!err) {
+		BT_ERR("Failed to receive mac_init interrupt");
+		return -ETIME;
+	}
+
+	/* Check cached boot stage is CSR_BOOT_STAGE_ROM(BIT(0)) */
+	if (~data->boot_stage_cache & CSR_BOOT_STAGE_ROM) {
+		BT_ERR("Device is not running in rom");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/* This function handles the MSI-X interrupt for gp0 cause(bit 0 in
+ * CSR_MSIX_HW_INT_CAUSES) which is sent for boot stage and image response.
+ */
+static void btintel_pcie_msix_gp0_handler(struct btintel_pcie_data *data)
+{
+	u32 reg;
+
+	/* This interrupt is for three different causes and it is not easy to
+	 * know what causes the interrupt. So, it compares each register value
+	 * with cached value and update it before it wake up the queue.
+	 */
+	reg = btintel_pcie_rd_reg32(data, CSR_BOOT_STAGE_REG);
+	if (reg != data->boot_stage_cache) {
+		data->boot_stage_cache = reg;
+
+		BT_DBG("Boot Stage updated: 0x%x", reg);
+	}
+
+	reg = btintel_pcie_rd_reg32(data, CSR_IMG_RESPONSE_REG);
+	if (reg != data->img_resp_cache) {
+		data->img_resp_cache = reg;
+
+		BT_DBG("Image Response updated: 0x%x", reg);
+	}
+
+	BT_DBG("---------- cached GP0 registers ----------");
+	BT_DBG("Cached Boot Stage Reg: 0x%x", data->boot_stage_cache);
+	BT_DBG("Cached Image Resp Reg: 0x%x", data->img_resp_cache);
+
+	data->gp0_received = true;
+
+	/* If the boot stage is OP or IML, reset IA and start RX again */
+	if (data->boot_stage_cache & CSR_BOOT_STAGE_OPFW ||
+	    data->boot_stage_cache & CSR_BOOT_STAGE_IML) {
+		btintel_pcie_reset_ia(data);
+		btintel_pcie_start_rx(data);
+	}
+
+	wake_up(&data->gp0_wait_q);
+}
+
+/* This function handles the MSX-X interrupt for rx queue 0 which is for TX
+ */
+static void btintel_pcie_msix_tx_handle(struct btintel_pcie_data *data)
+{
+	u16 cr_tia, cr_hia;
+	struct txq *txq;
+	struct urbd0 *urbd0;
+
+	cr_tia = data->ia.cr_tia[TXQ_NUM];
+	cr_hia = data->ia.cr_hia[TXQ_NUM];
+
+	BT_DBG("[TXQ] cr_hia=%u  cr_tia=%u", cr_hia, cr_tia);
+
+	/* Check CR_TIA and CR_HIA for change */
+	if (cr_tia == cr_hia) {
+		BT_ERR("[TXQ] no new CD found");
+		return;
+	}
+
+	txq = &data->txq;
+
+	while (cr_tia != cr_hia) {
+		BT_DBG("[TXQ] wake up tx_wait_q");
+
+		data->tx_wait_done = true;
+		wake_up(&data->tx_wait_q);
+
+		/* Get URBD0 pointed by cr_tia */
+		urbd0 = &txq->urbd0s[cr_tia];
+		ipc_print_urbd0(urbd0, cr_tia);
+
+		/* Make sure the completed TFD index is within the range */
+		if (urbd0->tfd_index > txq->count) {
+			BT_ERR("[TXQ] out of range: (0x%x)", urbd0->tfd_index);
+			return;
+		}
+
+		/* Increase cr_tia */
+		cr_tia = (cr_tia + 1) % txq->count;
+		data->ia.cr_tia[TXQ_NUM] = cr_tia;
+		ipc_print_ia_ring(&data->ia, TXQ_NUM);
+	}
+}
+
+static int btintel_pcie_recv_event_intel(struct hci_dev *hdev,
+					 struct sk_buff *skb)
+{
+	if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+		struct hci_event_hdr *hdr = (void *)skb->data;
+
+		if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
+		    hdr->plen > 0) {
+			const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
+			unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
+
+			switch (skb->data[2]) {
+			case 0x02:
+				/* When switching to the operational firmware
+				 * the device sends a vendor specific event
+				 * indicating that the bootup completed.
+				 */
+				btintel_bootup(hdev, ptr, len);
+				break;
+			case 0x06:
+				/* When the firmware loading completes the
+				 * device sends out a vendor specific event
+				 * indicating the result of the firmware
+				 * loading.
+				 */
+				btintel_secure_send_result(hdev, ptr, len);
+				break;
+			}
+		}
+	}
+
+	return hci_recv_frame(hdev, skb);
+}
+
+/* Process the received rx data
+ * It check the frame header to identify the data type and create skb
+ * and calling HCI API
+ */
+static int btintel_pcie_hci_recv_frame(struct btintel_pcie_data *data,
+				       void *buf, int count)
+{
+	struct hci_dev *hdev = data->hdev;
+	int ret;
+	u32 pkt_type;
+	u16 plen;
+	struct sk_buff *skb;
+
+	spin_lock(&data->hci_rx_lock);
+
+	/* The first 4 bytes indicates the Intel PCIe specific packet type.
+	 * Read the packet type here before remove it.
+	 */
+	pkt_type = get_unaligned_le32(buf);
+	bt_dev_dbg(hdev, "pkt_type=%u count=%d", pkt_type, count);
+
+	buf += BTINTEL_PCIE_HCI_TYPE_LEN;
+	count -= BTINTEL_PCIE_HCI_TYPE_LEN;
+
+	hdev->stat.byte_rx += count;
+
+	skb = bt_skb_alloc(count, GFP_ATOMIC);
+	if (!skb) {
+		bt_dev_err(hdev, "Failed to allocate skb for event");
+		ret = -ENOMEM;
+		goto exit_error;
+	}
+
+	switch (pkt_type) {
+	case BTINTEL_PCIE_HCI_ACL_PKT:
+		hci_skb_pkt_type(skb) = HCI_ACLDATA_PKT;
+		memcpy(skb_put(skb, HCI_ACL_HDR_SIZE), buf, HCI_ACL_HDR_SIZE);
+		plen = hci_acl_hdr(skb)->dlen;
+		buf += HCI_ACL_HDR_SIZE;
+		break;
+	case BTINTEL_PCIE_HCI_SCO_PKT:
+		hci_skb_pkt_type(skb) = HCI_SCODATA_PKT;
+		memcpy(skb_put(skb, HCI_SCO_HDR_SIZE), buf, HCI_SCO_HDR_SIZE);
+		plen = hci_sco_hdr(skb)->dlen;
+		buf += HCI_SCO_HDR_SIZE;
+		break;
+	case BTINTEL_PCIE_HCI_EVT_PKT:
+		hci_skb_pkt_type(skb) = HCI_EVENT_PKT;
+		memcpy(skb_put(skb, HCI_EVENT_HDR_SIZE), buf,
+		       HCI_EVENT_HDR_SIZE);
+		plen = hci_event_hdr(skb)->plen;
+		buf += HCI_EVENT_HDR_SIZE;
+		break;
+	default:
+		ret = -EILSEQ;
+		kfree_skb(skb);
+		goto exit_error;
+	}
+	memcpy(skb_put(skb, plen), buf, plen);
+
+	if (pkt_type == BTINTEL_PCIE_HCI_EVT_PKT)
+		ret = btintel_pcie_recv_event_intel(hdev, skb);
+	else
+		ret = hci_recv_frame(hdev, skb);
+
+exit_error:
+	if (ret)
+		hdev->stat.err_rx++;
+
+	spin_unlock(&data->hci_rx_lock);
+
+	return ret;
+}
+
+/* RX work queue */
+static void btintel_pcie_rx_work(struct work_struct *work)
+{
+	struct btintel_pcie_data *data = container_of(work,
+					struct btintel_pcie_data, rx_work);
+	struct sk_buff *skb;
+	int err;
+
+	/* Process the sk_buf in queue and send to the hci layer */
+	while ((skb = skb_dequeue(&data->rx_skb_q))) {
+		err = btintel_pcie_hci_recv_frame(data, skb->data, skb->len);
+		if (err) {
+			BT_ERR("Failed to send received frame: %d", err);
+			kfree_skb(skb);
+		}
+	}
+}
+
+/* create the sk_buff with data and save it to queue and start rx work
+ */
+static int btintel_pcie_submit_rx_work(struct btintel_pcie_data *data, u8 status,
+				       void *buf)
+{
+	int ret, len;
+	struct rfh_hdr *rfh_hdr;
+	struct sk_buff *skb;
+
+	rfh_hdr = (struct rfh_hdr *)buf;
+	btintel_pcie_hci_dump("RFH HDR", buf, sizeof(*rfh_hdr));
+
+	len = rfh_hdr->packet_len;
+
+	/* Remove RFH header */
+	buf += sizeof(*rfh_hdr);
+	btintel_pcie_hci_dump("RX", buf, len);
+
+	/* Create the sk_buf with packet in the buf and save it to sk_buf queue
+	 */
+	skb = alloc_skb(len, GFP_ATOMIC);
+	if (!skb) {
+		ret = -ENOMEM;
+		goto resubmit;
+	}
+
+	/* Copy the data to skb */
+	memcpy(skb_put(skb, len), buf, len);
+
+	/* Save the skb to rx queue */
+	skb_queue_tail(&data->rx_skb_q, skb);
+
+	/* Calling rx_work queue to process the skb */
+	queue_work(data->workqueue, &data->rx_work);
+
+resubmit:
+	BT_DBG("submit next read request");
+
+	/* submit read */
+	ret = btintel_pcie_submit_rx(data);
+
+	return ret;
+}
+
+/* This function handles the MSI-X interrupt for rx queue 1 which is for RX
+ */
+static void btintel_pcie_msix_rx_handle(struct btintel_pcie_data *data)
+{
+	u16 cr_hia, cr_tia;
+	struct rxq *rxq;
+	struct urbd1 *urbd1;
+	struct frbd *frbd;
+	struct data_buf *buf;
+	int ret;
+
+	cr_hia = data->ia.cr_hia[RXQ_NUM];
+	cr_tia = data->ia.cr_tia[RXQ_NUM];
+
+	BT_DBG("[RXQ] cr_hia=%u  cr_tia=%u", cr_hia, cr_tia);
+
+	/* Check CR_TIA and CR_HIA for change */
+	if (cr_tia == cr_hia) {
+		BT_ERR("[RXQ] no new CD found");
+		return;
+	}
+
+	rxq = &data->rxq;
+
+	/* The firmware sends multiple CD in a single MSIX and it needs to
+	 * process all received CDs in this interrupt.
+	 */
+	while (cr_tia != cr_hia) {
+		/* Get URBD1 pointed by cr_tia */
+		urbd1 = &rxq->urbd1s[cr_tia];
+		ipc_print_urbd1(urbd1, cr_tia);
+
+		/* Get FRBD poined by urbd1->frbd_tag */
+		frbd = &rxq->frbds[urbd1->frbd_tag];
+
+		/* Get buf from FRBD tag */
+		buf = &rxq->bufs[urbd1->frbd_tag];
+		if (!buf) {
+			BT_ERR("[RXQ] failed to get the DMA buffer for %d",
+			       urbd1->frbd_tag);
+			return;
+		}
+
+		/* prepare RX work */
+		ret = btintel_pcie_submit_rx_work(data, urbd1->status,
+						  buf->data);
+		if (ret) {
+			BT_ERR("[RXQ] failed to submit rx request");
+			return;
+		}
+
+		/* Update cr_tia */
+		cr_tia = (cr_tia + 1) % rxq->count;
+		data->ia.cr_tia[RXQ_NUM] = cr_tia;
+		ipc_print_ia_ring(&data->ia, RXQ_NUM);
+	}
+	BT_DBG("[RXQ] completed rx interrupt");
+}
+
+static irqreturn_t btintel_pcie_msix_isr(int irq, void *data)
+{
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t btintel_pcie_irq_msix_handler(int irq, void *dev_id)
+{
+	struct msix_entry *entry = dev_id;
+	struct btintel_pcie_data *data = btintel_pcie_get_data(entry);
+	u32 intr_fh, intr_hw;
+
+	BT_DBG("handling msix(irq=%d dev_id=0x%p)", irq, dev_id);
+
+	spin_lock(&data->irq_lock);
+	intr_fh = btintel_pcie_rd_reg32(data, CSR_MSIX_FH_INT_CAUSES);
+	intr_hw = btintel_pcie_rd_reg32(data, CSR_MSIX_HW_INT_CAUSES);
+
+	/* Clear causes registers to avoid being handling the same cause */
+	btintel_pcie_wr_reg32(data, CSR_MSIX_FH_INT_CAUSES, intr_fh);
+	btintel_pcie_wr_reg32(data, CSR_MSIX_HW_INT_CAUSES, intr_hw);
+	spin_unlock(&data->irq_lock);
+
+	BT_DBG("intr_fh=0x%x intr_hw=0x%x", intr_fh, intr_hw);
+
+	if (unlikely(!(intr_fh | intr_hw))) {
+		BT_DBG("Ignore interrupt, inta == 0");
+		return IRQ_NONE;
+	}
+
+	/* This interrupt is triggered by the firmware after updating
+	 * boot_stage register and image_response register
+	 */
+	if (intr_hw & MSIX_HW_INT_CAUSES_GP0) {
+		BT_DBG("intr for MSIX_HW_INT_CAUSES_GP0");
+		btintel_pcie_msix_gp0_handler(data);
+	}
+
+	/* For TX */
+	if (intr_fh & MSIX_FH_INT_CAUSES_0) {
+		BT_DBG("intr for MSIX_FH_INT_CAUSES_0");
+		btintel_pcie_msix_tx_handle(data);
+	}
+
+	/* For RX */
+	if (intr_fh & MSIX_FH_INT_CAUSES_1) {
+		BT_DBG("intr for MSIX_FH_INT_CAUSES_1");
+		btintel_pcie_msix_rx_handle(data);
+	}
+
+	/* TODO: Add handler for other causes */
+	/*
+	 * Before sending the interrupt the HW disables it to prevent
+	 * a nested interrupt. This is done by writing 1 to the corresponding
+	 * bit in the mask register. After handling the interrupt, it should be
+	 * re-enabled by clearing this bit. This register is defined as
+	 * write 1 clear (W1C) register, meaning that it's being clear
+	 * by writing 1 to the bit.
+	 */
+	btintel_pcie_wr_reg32(data, CSR_MSIX_AUTOMASK_ST, BIT(entry->entry));
+
+	return IRQ_HANDLED;
+}
+
+/* This function requests the irq for msix and registers the handlers per irq.
+ * Currently, it requests only 1 irq for all interrupt causes.
+ */
+static int btintel_pcie_setup_irq(struct btintel_pcie_data *data)
+{
+	int err;
+	int num_irqs, i;
+
+	BT_DBG("Initialize msix_entries...");
+	for (i = 0; i < MSIX_VEC_MAX; i++) {
+		data->msix_entries[i].entry = i;
+		BT_DBG("msix_entries[%d] vector=0x%x entry=0x%x",
+		       i, data->msix_entries[i].vector,
+		       data->msix_entries[i].entry);
+	}
+
+	num_irqs = pci_enable_msix_range(data->pdev, data->msix_entries,
+					 MSIX_VEC_MIN,
+					 MSIX_VEC_MAX);
+	if (num_irqs < 0) {
+		BT_ERR("Failed to enable msix range (%d)", num_irqs);
+		return num_irqs;
+	}
+
+	data->alloc_vecs = num_irqs;
+	data->msix_enabled = 1;
+	data->def_irq = 0;
+
+	BT_DBG("Returned num_irqs=%d", num_irqs);
+	for (i = 0; i < num_irqs; i++) {
+		BT_DBG("msix_entries[%d] vector=0x%x entry=0x%x", i,
+		       data->msix_entries[i].vector,
+		       data->msix_entries[i].entry);
+	}
+
+	BT_DBG("setup irq handler");
+	for (i = 0; i < data->alloc_vecs; i++) {
+		struct msix_entry *msix_entry;
+
+		msix_entry = &data->msix_entries[i];
+
+		err = devm_request_threaded_irq(&data->pdev->dev,
+						msix_entry->vector,
+						btintel_pcie_msix_isr,
+						btintel_pcie_irq_msix_handler,
+						IRQF_SHARED,
+						KBUILD_MODNAME,
+						msix_entry);
+		if (err) {
+			BT_ERR("Failed to allocate irq handler (%d)", err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+struct btintel_pcie_causes_list {
+	u32 cause;
+	u32 mask_reg;
+	u8 cause_num;
+};
+
+struct btintel_pcie_causes_list causes_list[] = {
+	{ MSIX_FH_INT_CAUSES_0,		CSR_MSIX_FH_INT_MASK,	0x00 },
+	{ MSIX_FH_INT_CAUSES_1,		CSR_MSIX_FH_INT_MASK,	0x01 },
+	{ MSIX_HW_INT_CAUSES_GP0,	CSR_MSIX_HW_INT_MASK,	0x20 },
+};
+
+/* This function configures the interrupt masks for both HW_INT_CAUSES and
+ * FH_INT_CAUSES which are meaningful to us.
+ *
+ * After resetting BT function via PCIE FLR or FUNC_CTRL reset, the driver
+ * need to call this function again to configure it again since the masks
+ * are reset to 0xFFFFFFFF after reset.
+ */
+static void btintel_pcie_config_msix(struct btintel_pcie_data *data)
+{
+	int i;
+	int val = data->def_irq | MSIX_NON_AUTO_CLEAR_CAUSE;
+
+	/* Set Non Auto Clear Cause */
+	for (i = 0; i < ARRAY_SIZE(causes_list); i++) {
+		btintel_pcie_wr_reg8(data,
+				     CSR_MSIX_IVAR(causes_list[i].cause_num),
+				     val);
+		btintel_pcie_clr_reg_bits(data,
+					  causes_list[i].mask_reg,
+					  causes_list[i].cause);
+	}
+
+	/* Save the initial interrupt mask */
+	data->fh_init_mask = ~btintel_pcie_rd_reg32(data, CSR_MSIX_FH_INT_MASK);
+	data->hw_init_mask = ~btintel_pcie_rd_reg32(data, CSR_MSIX_HW_INT_MASK);
+	BT_DBG("init_mask: fh=0x%x hw=0x%x", data->fh_init_mask,
+	       data->hw_init_mask);
+}
+
+static int btintel_pcie_config_pcie(struct pci_dev *pdev,
+				    struct btintel_pcie_data *data)
+{
+	int err;
+
+	err = pcim_enable_device(pdev);
+	if (err) {
+		BT_ERR("Failed to enable pci device (%d)", err);
+		return err;
+	}
+	pci_set_master(pdev);
+
+	/* Setup DMA mask */
+	BT_DBG("Set DMA_MASK(64)");
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
+	if (err) {
+		BT_DBG("Set DMA_MASK(32)");
+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		/* Both attempt failed */
+		if (err) {
+			BT_ERR("No suitable DMA available");
+			return err;
+		}
+	}
+
+	/* Get BAR to access CSR */
+	err = pcim_iomap_regions(pdev, BIT(0), KBUILD_MODNAME);
+	if (err) {
+		BT_ERR("Failed to get iomap regions (%d)", err);
+		return err;
+	}
+
+	data->base_addr = pcim_iomap_table(pdev)[0];
+	if (!data->base_addr) {
+		BT_ERR("Failed to get base address");
+		return -ENODEV;
+	}
+
+	err = btintel_pcie_setup_irq(data);
+	if (err) {
+		BT_ERR("Failed to setup irq for msix");
+		return err;
+	}
+
+	/* Configure MSI-X with causes list */
+	btintel_pcie_config_msix(data);
+
+	return 0;
+}
+
+static void btintel_pcie_init_ci(struct btintel_pcie_data *data,
+				 struct ctx_info *ci)
+{
+	ci->version = 0x1;
+	ci->size = sizeof(*ci);
+	ci->config = 0x0000;
+	ci->addr_cr_hia = data->ia.cr_hia_p_addr;
+	ci->addr_tr_tia = data->ia.tr_tia_p_addr;
+	ci->addr_cr_tia = data->ia.cr_tia_p_addr;
+	ci->addr_tr_hia = data->ia.tr_hia_p_addr;
+	ci->num_cr_ia = NUM_QUEUES;
+	ci->num_tr_ia = NUM_QUEUES;
+	ci->addr_urbdq0 = data->txq.urbd0s_p_addr;
+	ci->addr_tfdq = data->txq.tfds_p_addr;
+	ci->num_tfdq = data->txq.count;
+	ci->num_urbdq0 = data->txq.count;
+	ci->tfdq_db_vec = TXQ_NUM;
+	ci->urbdq0_db_vec = TXQ_NUM;
+	ci->rbd_size = RBD_SIZE_4K;
+	ci->addr_frbdq = data->rxq.frbds_p_addr;
+	ci->num_frbdq = data->rxq.count;
+	ci->frbdq_db_vec = RXQ_NUM;
+	ci->addr_urbdq1 = data->rxq.urbd1s_p_addr;
+	ci->num_urbdq1 = data->rxq.count;
+	ci->urbdq_db_vec = RXQ_NUM;
+}
+
+static void btintel_pcie_free_txq_bufs(struct btintel_pcie_data *data,
+				       struct txq *txq)
+{
+	/* Free data buffers first */
+	dma_free_coherent(&data->pdev->dev, txq->count * BUFFER_SIZE,
+			  txq->buf_v_addr, txq->buf_p_addr);
+	kfree(txq->bufs);
+	BT_DBG("txq buffers are freed");
+}
+
+static int btintel_pcie_setup_txq_bufs(struct btintel_pcie_data *data,
+				       struct txq *txq)
+{
+	int err = 0, i;
+	struct data_buf *buf;
+
+	if (txq->count == 0) {
+		BT_ERR("invalid parameter: txq->count");
+		err = -EINVAL;
+		goto exit_error;
+	}
+
+	/* Allocate the same number of buffers as the descriptor */
+	txq->bufs = kmalloc_array(txq->count, sizeof(*buf), GFP_KERNEL);
+	if (!txq->bufs) {
+		err = -ENOMEM;
+		goto exit_error;
+	}
+
+	/* Allocate full chunk of data buffer for DMA first and do indexing and
+	 * initialization next, so it can be freed easily
+	 */
+	txq->buf_v_addr = dma_alloc_coherent(&data->pdev->dev,
+					     txq->count * BUFFER_SIZE,
+					     &txq->buf_p_addr,
+					     GFP_KERNEL | __GFP_NOWARN);
+	if (!txq->buf_v_addr) {
+		BT_ERR("Failed to allocate DMA buf");
+		err = -ENOMEM;
+		kfree(txq->bufs);
+		goto exit_error;
+	}
+	memset(txq->buf_v_addr, 0, txq->count * BUFFER_SIZE);
+
+	BT_DBG("alloc bufs: p=0x%llx v=0x%p", txq->buf_p_addr, txq->buf_v_addr);
+
+	/* Setup the allocated DMA buffer to bufs. Each data_buf should
+	 * have virtual address and physical address
+	 */
+	for (i = 0; i < txq->count; i++) {
+		buf = &txq->bufs[i];
+		buf->data_p_addr = txq->buf_p_addr + (i * BUFFER_SIZE);
+		buf->data = txq->buf_v_addr + (i * BUFFER_SIZE);
+	}
+
+exit_error:
+	return err;
+}
+
+static void btintel_pcie_free_rxq_bufs(struct btintel_pcie_data *data,
+				       struct rxq *rxq)
+{
+	/* Free data buffers first */
+	dma_free_coherent(&data->pdev->dev, rxq->count * BUFFER_SIZE,
+			  rxq->buf_v_addr, rxq->buf_p_addr);
+	kfree(rxq->bufs);
+	BT_DBG("rxq buffers are freed");
+}
+
+static int btintel_pcie_setup_rxq_bufs(struct btintel_pcie_data *data,
+				       struct rxq *rxq)
+{
+	int err = 0, i;
+	struct data_buf *buf;
+
+	if (rxq->count == 0) {
+		BT_ERR("invalid parameter: rxq->count");
+		err = -EINVAL;
+		goto exit_error;
+	}
+
+	/* Allocate the same number of buffers as the descriptor */
+	rxq->bufs = kmalloc_array(rxq->count, sizeof(*buf), GFP_KERNEL);
+	if (!rxq->bufs) {
+		err = -ENOMEM;
+		goto exit_error;
+	}
+
+	/* Allocate full chunk of data buffer for DMA first and do indexing and
+	 * initialization next, so it can be freed easily
+	 */
+	rxq->buf_v_addr = dma_alloc_coherent(&data->pdev->dev,
+					     rxq->count * BUFFER_SIZE,
+					     &rxq->buf_p_addr,
+					     GFP_KERNEL | __GFP_NOWARN);
+	if (!rxq->buf_v_addr) {
+		BT_ERR("Failed to allocate DMA buf");
+		err = -ENOMEM;
+		kfree(rxq->bufs);
+		goto exit_error;
+	}
+	memset(rxq->buf_v_addr, 0, rxq->count * BUFFER_SIZE);
+
+	BT_DBG("alloc bufs: p=0x%llx v=0x%p", rxq->buf_p_addr, rxq->buf_v_addr);
+
+	/* Setup the allocated DMA buffer to bufs. Each data_buf should
+	 * have virtual address and physical address
+	 */
+	for (i = 0; i < rxq->count; i++) {
+		buf = &rxq->bufs[i];
+		buf->data_p_addr = rxq->buf_p_addr + (i * BUFFER_SIZE);
+		buf->data = rxq->buf_v_addr + (i * BUFFER_SIZE);
+	}
+
+exit_error:
+
+	return err;
+}
+
+static void btintel_pcie_setup_ia(struct btintel_pcie_data *data,
+				  dma_addr_t p_addr, void *v_addr,
+				  struct ia *ia)
+{
+	/* TR Head Index Array */
+	ia->tr_hia_p_addr = p_addr;
+	ia->tr_hia = v_addr;
+
+	/* TR Tail Index Array */
+	ia->tr_tia_p_addr = p_addr + sizeof(u16) * NUM_QUEUES;
+	ia->tr_tia = v_addr + sizeof(u16) * NUM_QUEUES;
+
+	/* CR Head index Array */
+	ia->cr_hia_p_addr = p_addr + (sizeof(u16) * NUM_QUEUES * 2);
+	ia->cr_hia = v_addr + (sizeof(u16) * NUM_QUEUES * 2);
+
+	/* CR Tail Index Array */
+	ia->cr_tia_p_addr = p_addr + (sizeof(u16) * NUM_QUEUES * 3);
+	ia->cr_tia = v_addr + (sizeof(u16) * NUM_QUEUES * 3);
+}
+
+static void btintel_pcie_free(struct btintel_pcie_data *data)
+{
+	btintel_pcie_free_rxq_bufs(data, &data->rxq);
+	btintel_pcie_free_txq_bufs(data, &data->txq);
+
+	dma_pool_free(data->dma_pool, data->dma_v_addr, data->dma_p_addr);
+	dma_pool_destroy(data->dma_pool);
+	BT_DBG("DMA memory is freed");
+}
+
+/* Allocate tx and rx queues, any related data structures and buffers.
+ */
+static int btintel_pcie_alloc(struct btintel_pcie_data *data)
+{
+	int err = 0;
+	size_t total;
+	dma_addr_t p_addr;
+	void *v_addr;
+
+	/* Allocate the chunk of DMA memory for descriptors, index array, and
+	 * context information, instead of allocating individually.
+	 * The DMA memory for data buffer is allocated while setting up the
+	 * each queue.
+	 *
+	 * Total size is sum of the following
+	 *  + size of TFD * Number of descriptors in queue
+	 *  + size of URBD0 * Number of descriptors in queue
+	 *  + size of FRBD * Number of descriptors in queue
+	 *  + size of URBD1 * Number of descriptors in queue
+	 *  + size of index * Number of queues(2) * type of index array(4)
+	 *  + size of context information
+	 */
+	total = (sizeof(struct tfd) + sizeof(struct urbd0) + sizeof(struct frbd)
+		+ sizeof(struct urbd1)) * DESCS_COUNT;
+
+	/* Add the sum of size of index array and size of ci struct */
+	total += (sizeof(u16) * NUM_QUEUES * 4) + sizeof(struct ctx_info);
+
+	/* Allocate DMA Pool */
+	data->dma_pool = dma_pool_create(KBUILD_MODNAME, &data->pdev->dev,
+					 total, DMA_POOL_ALIGNMENT, 0);
+	if (!data->dma_pool) {
+		BT_ERR("Failed to allocate dma pool for queues");
+		err = -ENOMEM;
+		goto exit_error;
+	}
+
+	v_addr = dma_pool_zalloc(data->dma_pool, GFP_KERNEL | __GFP_NOWARN,
+				 &p_addr);
+	if (!v_addr) {
+		BT_ERR("Failed to alloc dma memory for queues");
+		dma_pool_destroy(data->dma_pool);
+		err = -ENOMEM;
+		goto exit_error;
+	}
+
+	data->dma_p_addr = p_addr;
+	data->dma_v_addr = v_addr;
+
+	BT_DBG("dma pool: p_addr=0x%llx v_addr=0x%p", p_addr, v_addr);
+
+	/* Setup descriptor count */
+	data->txq.count = DESCS_COUNT;
+	data->rxq.count = DESCS_COUNT;
+
+	/* Setup tfds */
+	data->txq.tfds_p_addr = p_addr;
+	data->txq.tfds = v_addr;
+
+	p_addr += (sizeof(struct tfd) * DESCS_COUNT);
+	v_addr += (sizeof(struct tfd) * DESCS_COUNT);
+
+	/* Setup urbd0 */
+	data->txq.urbd0s_p_addr = p_addr;
+	data->txq.urbd0s = v_addr;
+
+	p_addr += (sizeof(struct urbd0) * DESCS_COUNT);
+	v_addr += (sizeof(struct urbd0) * DESCS_COUNT);
+
+	/* Setup frbd */
+	data->rxq.frbds_p_addr = p_addr;
+	data->rxq.frbds = v_addr;
+
+	p_addr += (sizeof(struct frbd) * DESCS_COUNT);
+	v_addr += (sizeof(struct frbd) * DESCS_COUNT);
+
+	/* Setup urbd1 */
+	data->rxq.urbd1s_p_addr = p_addr;
+	data->rxq.urbd1s = v_addr;
+
+	p_addr += (sizeof(struct urbd1) * DESCS_COUNT);
+	v_addr += (sizeof(struct urbd1) * DESCS_COUNT);
+
+	/* Setup data buffers for txq */
+	err = btintel_pcie_setup_txq_bufs(data, &data->txq);
+	if (err) {
+		BT_ERR("Failed to setup txq buffers: %d", err);
+		goto exit_error_pool;
+	}
+
+	/* Setup data buffers for rxq */
+	err = btintel_pcie_setup_rxq_bufs(data, &data->rxq);
+	if (err) {
+		BT_ERR("Failed to allocate rxq buffers: %d", err);
+		goto exit_error_txq;
+	}
+
+	/* Setup Index Array */
+	btintel_pcie_setup_ia(data, p_addr, v_addr, &data->ia);
+
+	/* Setup Context Information */
+	p_addr += sizeof(u16) * NUM_QUEUES * 4;
+	v_addr += sizeof(u16) * NUM_QUEUES * 4;
+
+	data->ci = v_addr;
+	data->ci_p_addr = p_addr;
+
+	/* Initialize the CI */
+	btintel_pcie_init_ci(data, data->ci);
+
+	return 0;
+
+exit_error_txq:
+	btintel_pcie_free_txq_bufs(data, &data->txq);
+exit_error_pool:
+	dma_pool_free(data->dma_pool, data->dma_v_addr, data->dma_p_addr);
+	dma_pool_destroy(data->dma_pool);
+exit_error:
+	return err;
+}
+
+static void btintel_pcie_release_hdev(struct btintel_pcie_data *data)
+{
+	struct hci_dev *hdev;
+
+	hdev = data->hdev;
+	if (hdev) {
+		hci_unregister_dev(hdev);
+		hci_free_dev(hdev);
+	}
+	data->hdev = NULL;
+}
+
+static int btintel_pcie_setup_hdev(struct btintel_pcie_data *data)
+{
+	/* TODO: initialize hdev and assign the callbacks to hdev */
+	return -ENODEV;
+}
+
+static int btintel_pcie_probe(struct pci_dev *pdev,
+			      const struct pci_device_id *ent)
+{
+	int err;
+	struct btintel_pcie_data *data;
+
+	if (!pdev)
+		return -ENODEV;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	/* initialize the btintel_pcie data struct */
+	data->pdev = pdev;
+
+	spin_lock_init(&data->irq_lock);
+	spin_lock_init(&data->hci_rx_lock);
+
+	init_waitqueue_head(&data->gp0_wait_q);
+	data->gp0_received = false;
+
+	init_waitqueue_head(&data->tx_wait_q);
+	data->tx_wait_done = false;
+
+	data->workqueue = alloc_ordered_workqueue(KBUILD_MODNAME, WQ_HIGHPRI);
+	if (!data->workqueue) {
+		BT_ERR("Failed to create workqueue");
+		return -ENOMEM;
+	}
+	skb_queue_head_init(&data->rx_skb_q);
+	INIT_WORK(&data->rx_work, btintel_pcie_rx_work);
+
+	data->boot_stage_cache = 0x00;
+	data->img_resp_cache = 0x00;
+
+	/* PCIe specific all to configure it for this device includes
+	 * enabling pice device, setting master, reading BAR[0], configuring
+	 * MSIx, setting DMA mask, and save the driver data.
+	 */
+	err = btintel_pcie_config_pcie(pdev, data);
+	if (err) {
+		BT_ERR("Failed to config pcie (%d)", err);
+		goto exit_error;
+	}
+
+	/* Set driver data for this PCI device */
+	pci_set_drvdata(pdev, data);
+
+	/* allocate the IPC struct */
+	err = btintel_pcie_alloc(data);
+	if (err) {
+		BT_ERR("Failed to allocate queues(%d)", err);
+		goto exit_error;
+	}
+
+	/* Enable BT function */
+	err = btintel_pcie_enable_bt(data);
+	if (err) {
+		BT_ERR("Failed to start bluetooth device(%d)", err);
+		goto exit_error;
+	}
+
+	/* CNV information (CNVi and CNVr) is in CSR */
+	data->cnvi = btintel_pcie_rd_reg32(data, CSR_HW_REV_REG);
+	BT_DBG("cnvi:   0x%08x", data->cnvi);
+
+	data->cnvr = btintel_pcie_rd_reg32(data, CSR_RF_ID_REG);
+	BT_DBG("cnvr:   0x%08x", data->cnvr);
+
+	err = btintel_pcie_start_rx(data);
+	if (err) {
+		BT_ERR("Failed to start rx (%d)", err);
+		goto exit_error;
+	}
+
+	err = btintel_pcie_setup_hdev(data);
+	if (err) {
+		BT_ERR("Failed to setup HCI module");
+		goto exit_error;
+	}
+
+	return 0;
+
+exit_error:
+	/* reset device before leave */
+	btintel_pcie_reset_bt(data);
+
+	/* clear bus mastering */
+	pci_clear_master(pdev);
+
+	/* Unset driver data for PCI device */
+	pci_set_drvdata(pdev, NULL);
+
+	return err;
+}
+
+static void btintel_pcie_remove(struct pci_dev *pdev)
+{
+	struct btintel_pcie_data *data;
+
+	if (!pdev) {
+		BT_ERR("Invalid parameter: pdev");
+		return;
+	}
+
+	data = pci_get_drvdata(pdev);
+	if (!data) {
+		BT_ERR("data is empty");
+		return;
+	}
+
+	btintel_pcie_release_hdev(data);
+
+	flush_work(&data->rx_work);
+
+	destroy_workqueue(data->workqueue);
+
+	btintel_pcie_free(data);
+
+	/* reset device before leave */
+	btintel_pcie_reset_bt(data);
+
+	/* clear bus mastering */
+	pci_clear_master(pdev);
+
+	/* Unset driver data for PCI device */
+	pci_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int btintel_pcie_suspend(struct device *dev)
+{
+	/* TODO: Add support suspend */
+	return 0;
+}
+
+static int btintel_pcie_resume(struct device *dev)
+{
+	/* TODO: Add support resume */
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(btintel_pcie_pm_ops, btintel_pcie_suspend,
+							btintel_pcie_resume);
+#endif /* CONFIG_PM */
+
+static struct pci_driver btintel_pcie_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = btintel_pcie_table,
+	.probe = btintel_pcie_probe,
+	.remove = btintel_pcie_remove,
+#ifdef CONFIG_PM
+	.driver.pm = &btintel_pcie_pm_ops,
+#endif /* CONFIG_PM */
+};
+module_pci_driver(btintel_pcie_driver);
+
+MODULE_AUTHOR("Tedd Ho-Jeong An <tedd.an@intel.com>");
+MODULE_DESCRIPTION("Intel Bluetooth PCIe transport driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btintel_pcie.h b/drivers/bluetooth/btintel_pcie.h
new file mode 100644
index 000000000000..1554964686bd
--- /dev/null
+++ b/drivers/bluetooth/btintel_pcie.h
@@ -0,0 +1,449 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Intel Bluetooth PCIE driver
+ *
+ * Copyright (C) 2017 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2022  Intel Corporation
+ *
+ * Intel Bluetooth Driver for PCIE interface.
+ */
+
+/* Control and Status Register(CSR) */
+#define CSR_BASE			(0x000)
+#define CSR_FUNC_CTRL_REG		(CSR_BASE + 0x024)
+#define CSR_HW_REV_REG			(CSR_BASE + 0x028)
+#define CSR_RF_ID_REG			(CSR_BASE + 0x09C)
+#define CSR_BOOT_STAGE_REG		(CSR_BASE + 0x108)
+#define CSR_CI_ADDR_LSB_REG		(CSR_BASE + 0x118)
+#define CSR_CI_ADDR_MSB_REG		(CSR_BASE + 0x11C)
+#define CSR_IMG_RESPONSE_REG		(CSR_BASE + 0x12C)
+#define CSR_HBUS_TARG_WRPTR		(CSR_BASE + 0x460)
+
+/* CSR Function Control Register */
+#define CSR_FUNC_CTRL_FUNC_ENA		(BIT(0))
+#define CSR_FUNC_CTRL_MAC_INIT		(BIT(6))
+#define CSR_FUNC_CTRL_FUNC_INIT		(BIT(7))
+#define CSR_FUNC_CTRL_MAC_ACCESS_STS	(BIT(20))
+#define CSR_FUNC_CTRL_SW_RESET		(BIT(31))
+
+/* Value for CSR_BOOT_STAGE register */
+#define CSR_BOOT_STAGE_ROM		(BIT(0))
+#define CSR_BOOT_STAGE_IML		(BIT(1))
+#define CSR_BOOT_STAGE_OPFW		(BIT(2))
+#define CSR_BOOT_STAGE_ROM_LOCKDOWN	(BIT(10))
+#define CSR_BOOT_STAGE_IML_LOCKDOWN	(BIT(11))
+#define CSR_BOOT_STAGE_MAC_ACCESS_ON	(BIT(16))
+#define CSR_BOOT_STAGE_ALIVE		(BIT(23))
+
+/* Registers for MSIX */
+#define CSR_MSIX_BASE			(0x2000)
+#define CSR_MSIX_FH_INT_CAUSES		(CSR_MSIX_BASE + 0x0800)
+#define CSR_MSIX_FH_INT_MASK		(CSR_MSIX_BASE + 0x0804)
+#define CSR_MSIX_HW_INT_CAUSES		(CSR_MSIX_BASE + 0x0808)
+#define CSR_MSIX_HW_INT_MASK		(CSR_MSIX_BASE + 0x080C)
+#define CSR_MSIX_AUTOMASK_ST		(CSR_MSIX_BASE + 0x0810)
+#define CSR_MSIX_AUTOMASK_EN		(CSR_MSIX_BASE + 0x0814)
+#define CSR_MSIX_IVAR_BASE		(CSR_MSIX_BASE + 0x0880)
+#define CSR_MSIX_IVAR(cause)		(CSR_MSIX_IVAR_BASE + (cause))
+
+/* Causes for the FH register interrupts */
+enum msix_fh_int_causes {
+	MSIX_FH_INT_CAUSES_0		= BIT(0),	/* cause 0 */
+	MSIX_FH_INT_CAUSES_1		= BIT(1),	/* cause 1 */
+};
+
+/* Causes for the HW register interrupts */
+enum msix_hw_int_causes {
+	MSIX_HW_INT_CAUSES_GP0		= BIT(0),	/* cause 32 */
+};
+
+#define MSIX_NON_AUTO_CLEAR_CAUSE	BIT(7)
+
+/* Minimum and Maximum number of MSIx Vector
+ * Intel Bluetooth PCIe support only 1 vector
+ */
+#define MSIX_VEC_MAX			1
+#define MSIX_VEC_MIN			1
+
+/* Default Poll time for MAC access during init*/
+#define DEFAULT_MAC_ACCESS_TIMEOUT	200000
+
+/* Default interrupt timeout in msec */
+#define DEFAULT_INTR_TIMEOUT		3000
+
+/* The number of descriptors in TX/RX queues */
+#define DESCS_COUNT		16
+
+/* Number of Queue for TX and RX
+ * It indicates the index of the IA(Index Array)
+ */
+enum {
+	TXQ_NUM = 0,
+	RXQ_NUM = 1,
+	NUM_QUEUES = 2,
+};
+
+/* The size of DMA buffer for TX and RX */
+#define BUFFER_SIZE			4096
+
+/* DMA allocation alignment */
+#define DMA_POOL_ALIGNMENT		256
+
+/* TX wait time (jiffies) */
+#define TX_WAIT_TIMEOUT			500
+
+/* Number of pending RX requests for downlink */
+#define RX_MAX_QUEUE			6
+
+/* Enum for RBD buffer size mappting */
+enum {
+	RBD_SIZE_1K = 0x1,
+	RBD_SIZE_2K = 0x2,
+	RBD_SIZE_4K = 0x4,
+	RBD_SIZE_8K = 0x8,
+	RBD_SIZE_12K = 0x9,
+	RBD_SIZE_16K = 0xA,
+	RBD_SIZE_20K = 0xB,
+	RBD_SIZE_24K = 0xC,
+	RBD_SIZE_28K = 0xD,
+	RBD_SIZE_32K = 0xE,
+};
+
+/*
+ * Struct for Context Information (v2)
+ *
+ * All members are write-only for host and read-only for device.
+ *
+ * @version: Version of context information
+ * @size: Size of context information
+ * @config: Config with which host wants peripheral to execute
+ *	Subset of capability register published by device
+ * @addr_tr_hia: Address of TR Head Index Array
+ * @addr_tr_tia: Address of TR Tail Index Array
+ * @addr_cr_hia: Address of CR Head Index Array
+ * @addr_cr_tia: Address of CR Tail Index Array
+ * @num_tr_ia: Number of entries in TR Index Arrays
+ * @num_cr_ia: Number of entries in CR Index Arrays
+ * @rbd_siz: RBD Size { 0x4=4K }
+ * @addr_tfdq: Address of TFD Queue(tx)
+ * @addr_urbdq0: Address of URBD Queue(tx)
+ * @num_tfdq: Number of TFD in TFD Queue(tx)
+ * @num_urbdq0: Number of URBD in URBD Queue(tx)
+ * @tfdq_db_vec: Queue number of TFD
+ * @urbdq0_db_vec: Queue number of URBD
+ * @addr_frbdq: Address of FRBD Queue(rx)
+ * @addr_urbdq1: Address of URBD Queue(rx)
+ * @num_frbdq: Number of FRBD in FRBD Queue(rx)
+ * @frbdq_db_vec: Queue number of FRBD
+ * @num_urbdq1: Number of URBD in URBD Queue(rx)
+ * @urbdq_db_vec: Queue number of URBDQ1
+ * @tr_msi_vec: Transfer Ring MSI Vector
+ * @cr_msi_vec: Completion Ring MSI Vector
+ * @dbgc_addr: DBGC first fragmemt address
+ * @dbgc_size: DBGC buffer size
+ * @early_enable: Enarly debug enable
+ * @dbg_output_mode: Debug output mode
+ *	Bit[4] DBGC O/P { 0=SRAM, 1=DRAM(not relevant for NPK) }
+ *	Bit[5] DBGC I/P { 0=BDBG, 1=DBGI }
+ *	Bits[6:7] DBGI O/P(relevant if bit[5] = 1)
+ *	 0=BT DBGC, 1=WiFi DBGC, 2=NPK }
+ * @dbg_preset: Debug preset
+ * @ext_addr: Address of context information extension
+ * @ext_size: Size of context information part
+ *
+ * Total 38 DWords
+ *
+ */
+struct ctx_info {
+	u16	version;
+	u16	size;
+	u32	config;
+	u32	reserved_dw02;
+	u32	reserved_dw03;
+	u64	addr_tr_hia;
+	u64	addr_tr_tia;
+	u64	addr_cr_hia;
+	u64	addr_cr_tia;
+	u16	num_tr_ia;
+	u16	num_cr_ia;
+	u32	rbd_size:4,
+		reserved_dw13:28;
+	u64	addr_tfdq;
+	u64	addr_urbdq0;
+	u16	num_tfdq;
+	u16	num_urbdq0;
+	u16	tfdq_db_vec;
+	u16	urbdq0_db_vec;
+	u64	addr_frbdq;
+	u64	addr_urbdq1;
+	u16	num_frbdq;
+	u16	frbdq_db_vec;
+	u16	num_urbdq1;
+	u16	urbdq_db_vec;
+	u16	tr_msi_vec;
+	u16	cr_msi_vec;
+	u32	reserved_dw27;
+	u64	dbgc_addr;
+	u32	dbgc_size;
+	u32	early_enable:1,
+		reserved_dw31:3,
+		dbg_output_mode:4,
+		dbg_preset:8,
+		reserved2_dw31:16;
+	u64	ext_addr;
+	u32	ext_size;
+	u32	test_param;
+	u32	reserved_dw36;
+	u32	reserved_dw37;
+} __packed;
+
+/* Transfer Descriptor for TX
+ * @type: Not in use. Set to 0x0
+ * @size: Size of data in the buffer
+ * @addr: DMA Address of buffer
+ */
+struct tfd {
+	u8	type;
+	u16	size;
+	u8	reserved;
+	u64	addr;
+	u32	reserved1;
+} __packed;
+
+/* URB Descriptor for TX
+ * @tfd_index: Index of TFD in TFDQ + 1
+ * @num_txq: Queue index of TFD Queue
+ * @cmpl_count: Completion count. Always 0x01
+ * @immediate_cmpl: Immediate completion flag: Always 0x01
+ */
+struct urbd0 {
+	u32	tfd_index:16,
+		num_txq:8,
+		cmpl_count:4,
+		reserved:3,
+		immediate_cmpl:1;
+} __packed;
+
+/* FRB Descriptor for RX
+ * @tag: RX buffer tag (index of RX buffer queue)
+ * @addr: Address of buffer
+ */
+struct frbd {
+	u32	tag:16,
+		reserved:16;
+	u32	reserved2;
+	u64	addr;
+} __packed;
+
+/* URB Descriptor for RX
+ * @frbd_tag: Tag from FRBD
+ * @status: Status
+ */
+struct urbd1 {
+	u32	frbd_tag:16,
+		status:1,
+		reserved:14,
+		fixed:1;
+} __packed;
+
+/* RFH header in RX packet
+ * @packet_len: Length of the data in the buffer
+ * @rxq: RX Queue number
+ * @cmd_id: Command ID. Not in Use
+ */
+struct rfh_hdr {
+	u64	packet_len:16,
+		rxq:6,
+		reserved:10,
+		cmd_id:16,
+		reserved1:16;
+} __packed;
+
+/* Internal data buffer
+ * @data: pointer to the data buffer
+ * @p_addr: physical address of data buffer
+ */
+struct data_buf {
+	u8		*data;
+	dma_addr_t	data_p_addr;
+};
+
+/* Index Array */
+struct ia {
+	dma_addr_t	tr_hia_p_addr;
+	u16		*tr_hia;
+	dma_addr_t	tr_tia_p_addr;
+	u16		*tr_tia;
+	dma_addr_t	cr_hia_p_addr;
+	u16		*cr_hia;
+	dma_addr_t	cr_tia_p_addr;
+	u16		*cr_tia;
+};
+
+/* Structure for TX Queue
+ * @count: Number of descriptors
+ * @tfds: Array of TFD
+ * @urbd0s: Array of URBD0
+ * @buf: Array of data_buf structure
+ */
+struct txq {
+	u16		count;
+
+	dma_addr_t	tfds_p_addr;
+	struct tfd	*tfds;
+
+	dma_addr_t	urbd0s_p_addr;
+	struct urbd0	*urbd0s;
+
+	dma_addr_t	buf_p_addr;
+	void		*buf_v_addr;
+	struct data_buf	*bufs;
+};
+
+/* Structure for RX Queue
+ * @count: Number of descriptors
+ * @frbds: Array of FRBD
+ * @urbd1s: Array of URBD1
+ * @buf: Array of data_buf structure
+ */
+struct rxq {
+	u16		count;
+
+	dma_addr_t	frbds_p_addr;
+	struct frbd	*frbds;
+
+	dma_addr_t	urbd1s_p_addr;
+	struct urbd1	*urbd1s;
+
+	dma_addr_t	buf_p_addr;
+	void		*buf_v_addr;
+	struct data_buf	*bufs;
+};
+
+/* struct btintel_pcie_data
+ * @pdev: pci device
+ * @hdev: hdev device
+ * @flags: driver state
+ * @irq_lock: spinlock for MSIX
+ * @hci_rx_lock: spinlock for HCI RX flow
+ * @base_addr: pci base address (from BAR)
+ * @msix_entries: array of MSIX entries
+ * @msix_enabled: true if MSIX is enabled;
+ * @alloc_vecs: number of interrupt vectors allocated
+ * @def_irq: default irq for all causes
+ * @fh_init_mask: initial unmasked rxq causes
+ * @hw_init_mask: initial unmaksed hw causes
+ * @boot_stage_cache: cached value of boot stage register
+ * @img_resp_cache: cached value of image response register
+ * @cnvi: CNVi register value
+ * @cnvr: CNVr register value
+ * @gp0_received: condition for gp0 interrupt
+ * @gp0_wait_q: wait_q for gp0 interrupt
+ * @tx_wait_done: condition for tx interrupt
+ * @tx_wait_q: wait_q for tx interrupt
+ * @workqueue: workqueue for RX work
+ * @rx_skb_q: SKB queue for RX packet
+ * @rx_work: RX work struct to process the RX packet in @rx_skb_q
+ * @dma_pool: DMA pool for descriptors, index array and ci
+ * @dma_p_addr: DMA address for pool
+ * @dma_v_addr: address of pool
+ * @ci_p_addr: DMA address for CI struct
+ * @ci: CI struct
+ * @ia: Index Array struct
+ * @txq: TX Queue struct
+ * @rxq: RX Queue struct
+ */
+struct btintel_pcie_data {
+	struct pci_dev	*pdev;
+	struct hci_dev	*hdev;
+
+	unsigned long	flags;
+	/* lock used in MSIX interrupt */
+	spinlock_t	irq_lock;
+	/* lock to serialize rx events */
+	spinlock_t	hci_rx_lock;
+
+	void __iomem	*base_addr;
+
+	struct msix_entry	msix_entries[MSIX_VEC_MAX];
+	bool	msix_enabled;
+	u32	alloc_vecs;
+	u32	def_irq;
+
+	u32	fh_init_mask;
+	u32	hw_init_mask;
+
+	u32	boot_stage_cache;
+	u32	img_resp_cache;
+
+	u32	cnvi;
+	u32	cnvr;
+
+	bool	gp0_received;
+	wait_queue_head_t	gp0_wait_q;
+
+	bool	tx_wait_done;
+	wait_queue_head_t	tx_wait_q;
+
+	struct workqueue_struct	*workqueue;
+	struct sk_buff_head	rx_skb_q;
+	struct work_struct	rx_work;
+
+	struct dma_pool	*dma_pool;
+	dma_addr_t	dma_p_addr;
+	void		*dma_v_addr;
+
+	dma_addr_t	ci_p_addr;
+	struct ctx_info	*ci;
+	struct ia	ia;
+	struct txq	txq;
+	struct rxq	rxq;
+};
+
+static inline u32 btintel_pcie_rd_reg32(struct btintel_pcie_data *data,
+					u32 offset)
+{
+	return ioread32(data->base_addr + offset);
+}
+
+static inline void btintel_pcie_wr_reg8(struct btintel_pcie_data *data,
+					u32 offset, u8 val)
+{
+	iowrite8(val, data->base_addr + offset);
+}
+
+static inline void btintel_pcie_wr_reg32(struct btintel_pcie_data *data,
+					 u32 offset, u32 val)
+{
+	iowrite32(val, data->base_addr + offset);
+}
+
+static inline void btintel_pcie_set_reg_bits(struct btintel_pcie_data *data,
+					     u32 offset, u32 bits)
+{
+	u32 r;
+
+	r = ioread32(data->base_addr + offset);
+	r |= bits;
+	iowrite32(r, data->base_addr + offset);
+}
+
+static inline void btintel_pcie_clr_reg_bits(struct btintel_pcie_data *data,
+					     u32 offset, u32 bits)
+{
+	u32 r;
+
+	r = ioread32(data->base_addr + offset);
+	r &= ~bits;
+	iowrite32(r, data->base_addr + offset);
+}
