From patchwork Thu Oct 24 17:54:43 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Niklas Schnelle X-Patchwork-Id: 838810 Received: from mx0a-001b2d01.pphosted.com (mx0a-001b2d01.pphosted.com [148.163.156.1]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id CB79D1FF7B5; Thu, 24 Oct 2024 17:56:39 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=148.163.156.1 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729792602; cv=none; b=s554j6K1KEpRXmTRhkyAIk2uj1gCPpKC4p2bstGzf+7+GVE/TyCp+vNmHQVSDXWntNQwrBaX81HfJOpxpDqFY2ydF5qd+r/aZlYZbMTkqQhLa3OJHna20kZBtHjYudDFoRU+9X/0Vga7rff0dCsiHekEg4DVSc5enZjKHEao0Rs= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1729792602; c=relaxed/simple; bh=bLWm7FhDRzwwCBMQIKxm+diPj2USJyV3HuOiwyVo22o=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=KFfcbhe/IaVAmOgdQ/yFUE2gdP5Vu1d1IsqsUoQd0Y0kptIBICEXpDOGgq8rvs0Nz6th7Lonairk+UgEwHSDSm0b68VmLwA+Hzk+6OssRdRgVOXLW1Dx8BhulrxwxJepHoEEG+Ech2ZiGf3MWTDFFZ0e/Krrc7/Iv8jBFOLy950= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.ibm.com; spf=pass smtp.mailfrom=linux.ibm.com; dkim=pass (2048-bit key) header.d=ibm.com header.i=@ibm.com header.b=Ns/9ZUv+; arc=none smtp.client-ip=148.163.156.1 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=linux.ibm.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=linux.ibm.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=ibm.com header.i=@ibm.com header.b="Ns/9ZUv+" Received: from pps.filterd (m0353729.ppops.net [127.0.0.1]) by mx0a-001b2d01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 49OG3nDK002508; Thu, 24 Oct 2024 17:56:17 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ibm.com; h=cc :content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=pp1; bh=j21QKD H4tz8808Xlzi4EtSazsWEnbl2AAy2c148y0nY=; b=Ns/9ZUv+NfvULTDwWUXUxw cQBOljIo3DPVeF7gO0N1LvLFIVC26wcdIfC+mNXsbTCECc+N4v7YAlF/SoMfdUvn yoPHMd5FTPFkpB2Sns8qrw6B7SZnyn/kpWVKDi7No41LaSSdMnwI071+h0LJGDCO rv57CMo6b3W9zpRvC1c+Az+1mW6oB4hUNBOes78hmYKGd+l0sLr6t2tZQRtPYBm7 uGckuR8H9rpdo9VbY1Wj0AX1t2DuRtWfJj2Sv6xgFvHHiypViQBj8H+Ag/HqGept CHjxm4SbrqPRKQohT+90GOzLrW8INgb/gq1+rnPScWeVRGptqxmLlXVBRs8Ov9xA == Received: from pps.reinject (localhost [127.0.0.1]) by mx0a-001b2d01.pphosted.com (PPS) with ESMTPS id 42fgyuucdn-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 24 Oct 2024 17:56:16 +0000 (GMT) Received: from m0353729.ppops.net (m0353729.ppops.net [127.0.0.1]) by pps.reinject (8.18.0.8/8.18.0.8) with ESMTP id 49OHs3DR025797; Thu, 24 Oct 2024 17:56:16 GMT Received: from ppma23.wdc07v.mail.ibm.com (5d.69.3da9.ip4.static.sl-reverse.com [169.61.105.93]) by mx0a-001b2d01.pphosted.com (PPS) with ESMTPS id 42fgyuucdf-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 24 Oct 2024 17:56:15 +0000 (GMT) Received: from pps.filterd (ppma23.wdc07v.mail.ibm.com [127.0.0.1]) by ppma23.wdc07v.mail.ibm.com (8.18.1.2/8.18.1.2) with ESMTP id 49OHlI1V006876; Thu, 24 Oct 2024 17:56:14 GMT Received: from smtprelay07.wdc07v.mail.ibm.com ([172.16.1.74]) by ppma23.wdc07v.mail.ibm.com (PPS) with ESMTPS id 42emjd1nee-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 24 Oct 2024 17:56:14 +0000 Received: from smtpav03.wdc07v.mail.ibm.com (smtpav03.wdc07v.mail.ibm.com [10.39.53.230]) by smtprelay07.wdc07v.mail.ibm.com (8.14.9/8.14.9/NCO v10.0) with ESMTP id 49OHuDIV16712314 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-GCM-SHA384 bits=256 verify=OK); Thu, 24 Oct 2024 17:56:13 GMT Received: from smtpav03.wdc07v.mail.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id 6912758064; Thu, 24 Oct 2024 17:56:13 +0000 (GMT) Received: from smtpav03.wdc07v.mail.ibm.com (unknown [127.0.0.1]) by IMSVA (Postfix) with ESMTP id BE02C5805A; Thu, 24 Oct 2024 17:56:08 +0000 (GMT) Received: from tuxmaker.boeblingen.de.ibm.com (unknown [9.152.85.9]) by smtpav03.wdc07v.mail.ibm.com (Postfix) with ESMTP; Thu, 24 Oct 2024 17:56:08 +0000 (GMT) From: Niklas Schnelle Date: Thu, 24 Oct 2024 19:54:43 +0200 Subject: [PATCH v9 4/5] tty: serial: handle HAS_IOPORT dependencies Precedence: bulk X-Mailing-List: linux-bluetooth@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241024-b4-has_ioport-v9-4-6a6668593f71@linux.ibm.com> References: <20241024-b4-has_ioport-v9-0-6a6668593f71@linux.ibm.com> In-Reply-To: <20241024-b4-has_ioport-v9-0-6a6668593f71@linux.ibm.com> To: Brian Cain , Marcel Holtmann , Luiz Augusto von Dentz , Patrik Jakobsson , Maarten Lankhorst , Maxime Ripard , Thomas Zimmermann , David Airlie , Simona Vetter , Dave Airlie , Gerd Hoffmann , Lucas De Marchi , =?utf-8?q?Thomas_Hellstr=C3=B6m?= , Rodrigo Vivi , Greg Kroah-Hartman , Jiri Slaby , Arnd Bergmann , "Maciej W. Rozycki" , Heiko Carstens Cc: linux-kernel@vger.kernel.org, linux-hexagon@vger.kernel.org, linux-bluetooth@vger.kernel.org, dri-devel@lists.freedesktop.org, virtualization@lists.linux.dev, spice-devel@lists.freedesktop.org, intel-xe@lists.freedesktop.org, linux-serial@vger.kernel.org, linux-arch@vger.kernel.org, Niklas Schnelle , Arnd Bergmann X-Mailer: b4 0.14.2 X-Developer-Signature: v=1; a=openpgp-sha256; l=14775; i=schnelle@linux.ibm.com; h=from:subject:message-id; bh=bLWm7FhDRzwwCBMQIKxm+diPj2USJyV3HuOiwyVo22o=; b=owGbwMvMwCX2Wz534YHOJ2GMp9WSGNKlukSbaxaGX3Ro1E3RPNu30zrMZXOh/6JypfAgUXfNC M/n5y52lLIwiHExyIopsizqcvZbVzDFdE9QfwfMHFYmkCEMXJwCMJHwTEaGvU5Mk1q/7lcK/iYt 9+HkIva5wSsOrg908RB6MOnqwtQ2RkaGS42JMsk1Z15b1fnkbS7KCiz3WcjnNnetmkkZd9C5k1M 4AA== X-Developer-Key: i=schnelle@linux.ibm.com; a=openpgp; fpr=9DB000B2D2752030A5F72DDCAFE43F15E8C26090 X-TM-AS-GCONF: 00 X-Proofpoint-ORIG-GUID: NoACS_iHlWAx1BDiicBGTawHWRYwTMDe X-Proofpoint-GUID: 2Zw-hTji6DG3q21wwQAKu8GXXi03kByF X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1051,Hydra:6.0.680,FMLib:17.12.62.30 definitions=2024-10-15_01,2024-10-11_01,2024-09-30_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 bulkscore=0 mlxlogscore=999 spamscore=0 malwarescore=0 clxscore=1015 lowpriorityscore=0 phishscore=0 impostorscore=0 adultscore=0 suspectscore=0 mlxscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2409260000 definitions=main-2410240145 In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers using them unconditionally. Some 8250 serial drivers support MMIO only use, so fence only the parts requiring I/O ports and print an error message if a device can't be supported with the current configuration. Co-developed-by: Arnd Bergmann Signed-off-by: Arnd Bergmann Acked-by: Greg Kroah-Hartman Reviewed-by: Maciej W. Rozycki Signed-off-by: Niklas Schnelle --- drivers/tty/Kconfig | 4 ++-- drivers/tty/serial/8250/8250_early.c | 4 ++++ drivers/tty/serial/8250/8250_pci.c | 40 +++++++++++++++++++++++++++++++++++ drivers/tty/serial/8250/8250_pcilib.c | 12 ++++++++++- drivers/tty/serial/8250/8250_pcilib.h | 2 ++ drivers/tty/serial/8250/8250_port.c | 27 +++++++++++++++++++---- drivers/tty/serial/8250/Kconfig | 4 ++-- drivers/tty/serial/Kconfig | 2 +- include/linux/serial_core.h | 4 ++++ 9 files changed, 89 insertions(+), 10 deletions(-) diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index a45d423ad10f02c3a818021bbb18655a8b690500..63a494d36a1fdceba5a7b39f4516060e48af0cc6 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -220,7 +220,7 @@ config MOXA_INTELLIO config MOXA_SMARTIO tristate "Moxa SmartIO support v. 2.0" - depends on SERIAL_NONSTANDARD && PCI + depends on SERIAL_NONSTANDARD && PCI && HAS_IOPORT help Say Y here if you have a Moxa SmartIO multiport serial card and/or want to help develop a new version of this driver. @@ -302,7 +302,7 @@ config GOLDFISH_TTY_EARLY_CONSOLE config IPWIRELESS tristate "IPWireless 3G UMTS PCMCIA card support" - depends on PCMCIA && NETDEVICES + depends on PCMCIA && NETDEVICES && HAS_IOPORT select PPP help This is a driver for 3G UMTS PCMCIA card from IPWireless company. In diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 6176083d0341ca10edebe5c4eebfffc922a61472..84242292176570cd2c92afbd4755d303827a4abc 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -46,8 +46,10 @@ static unsigned int serial8250_early_in(struct uart_port *port, int offset) return readl(port->membase + offset); case UPIO_MEM32BE: return ioread32be(port->membase + offset); +#ifdef CONFIG_HAS_IOPORT case UPIO_PORT: return inb(port->iobase + offset); +#endif default: return 0; } @@ -70,9 +72,11 @@ static void serial8250_early_out(struct uart_port *port, int offset, int value) case UPIO_MEM32BE: iowrite32be(value, port->membase + offset); break; +#ifdef CONFIG_HAS_IOPORT case UPIO_PORT: outb(value, port->iobase + offset); break; +#endif } } diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 6709b6a5f3011db38acc58dc7223158fe4fcf72e..7d7a6d62c09ceabcf4094d539c565ed09c153561 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -964,6 +964,9 @@ static int pci_ite887x_init(struct pci_dev *dev) struct resource *iobase = NULL; u32 miscr, uartbar, ioport; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); + /* search for the base-ioport */ for (i = 0; i < ARRAY_SIZE(inta_addr); i++) { iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, @@ -1514,6 +1517,9 @@ static int pci_quatech_init(struct pci_dev *dev) const struct pci_device_id *match; bool amcc = false; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); + match = pci_match_id(quatech_cards, dev); if (match) amcc = match->driver_data; @@ -1538,6 +1544,9 @@ static int pci_quatech_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + /* Needed by pci_quatech calls below */ port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags)); /* Set up the clocking */ @@ -1655,6 +1664,9 @@ static int pci_fintek_setup(struct serial_private *priv, u8 config_base; u16 iobase; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(pdev); + config_base = 0x40 + 0x08 * idx; /* Get the io address from configuration space */ @@ -1686,6 +1698,9 @@ static int pci_fintek_init(struct pci_dev *dev) u8 config_base; struct serial_private *priv = pci_get_drvdata(dev); + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); + if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) || !(pci_resource_flags(dev, 4) & IORESOURCE_IO) || !(pci_resource_flags(dev, 3) & IORESOURCE_IO)) @@ -1864,6 +1879,9 @@ static int kt_serial_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + port->port.flags |= UPF_BUG_THRE; port->port.serial_in = kt_serial_in; port->port.handle_break = kt_handle_break; @@ -1884,6 +1902,9 @@ pci_wch_ch353_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + port->port.flags |= UPF_FIXED_TYPE; port->port.type = PORT_16550A; return pci_default_setup(priv, board, port, idx); @@ -1894,6 +1915,9 @@ pci_wch_ch355_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + port->port.flags |= UPF_FIXED_TYPE; port->port.type = PORT_16550A; return pci_default_setup(priv, board, port, idx); @@ -1904,6 +1928,9 @@ pci_wch_ch38x_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + port->port.flags |= UPF_FIXED_TYPE; port->port.type = PORT_16850; return pci_default_setup(priv, board, port, idx); @@ -1918,6 +1945,8 @@ static int pci_wch_ch38x_init(struct pci_dev *dev) int max_port; unsigned long iobase; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); switch (dev->device) { case 0x3853: /* 8 ports */ @@ -1937,6 +1966,11 @@ static void pci_wch_ch38x_exit(struct pci_dev *dev) { unsigned long iobase; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) { + serial_8250_warn_need_ioport(dev); + return; + } + iobase = pci_resource_start(dev, 0); outb(0x0, iobase + CH384_XINT_ENABLE_REG); } @@ -2052,6 +2086,9 @@ static int pci_moxa_init(struct pci_dev *dev) unsigned int i, num_ports = moxa_get_nports(device); u8 val, init_mode = MOXA_RS232; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); + if (!(pci_moxa_supported_rs(dev) & MOXA_SUPP_RS232)) { init_mode = MOXA_RS422; } @@ -2084,6 +2121,9 @@ pci_moxa_setup(struct serial_private *priv, unsigned int bar = FL_GET_BASE(board->flags); int offset; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + if (board->num_ports == 4 && idx == 3) offset = 7 * board->uart_offset; else diff --git a/drivers/tty/serial/8250/8250_pcilib.c b/drivers/tty/serial/8250/8250_pcilib.c index ea906d721b2c3eac15c9e8d62cc6fa56c3ef6150..ec4d041778027a0c9f27facbb97c2b74819cfda3 100644 --- a/drivers/tty/serial/8250/8250_pcilib.c +++ b/drivers/tty/serial/8250/8250_pcilib.c @@ -12,6 +12,14 @@ #include "8250.h" #include "8250_pcilib.h" +int serial_8250_warn_need_ioport(struct pci_dev *dev) +{ + dev_warn(&dev->dev, + "Serial port not supported because of missing I/O resource\n"); + + return -ENXIO; +} + int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar, unsigned int offset, int regshift) { @@ -27,12 +35,14 @@ int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, port->port.mapbase = pci_resource_start(dev, bar) + offset; port->port.membase = pcim_iomap_table(dev)[bar] + offset; port->port.regshift = regshift; - } else { + } else if (IS_ENABLED(CONFIG_HAS_IOPORT)) { port->port.iotype = UPIO_PORT; port->port.iobase = pci_resource_start(dev, bar) + offset; port->port.mapbase = 0; port->port.membase = NULL; port->port.regshift = 0; + } else { + return serial_8250_warn_need_ioport(dev); } return 0; } diff --git a/drivers/tty/serial/8250/8250_pcilib.h b/drivers/tty/serial/8250/8250_pcilib.h index 1aaf1b50ce9cc9d78c098e0495838c17eb8752cd..16a274574cdef938fe7700d30b19e75dbbd9b748 100644 --- a/drivers/tty/serial/8250/8250_pcilib.h +++ b/drivers/tty/serial/8250/8250_pcilib.h @@ -13,3 +13,5 @@ struct uart_8250_port; int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar, unsigned int offset, int regshift); + +int serial_8250_warn_need_ioport(struct pci_dev *dev); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 3509af7dc52b8816f2f5ab58f0d999696f7483e7..91369f542b0bc7fc1d044f24db9a4ac98b394660 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -338,6 +338,7 @@ static void default_serial_dl_write(struct uart_8250_port *up, u32 value) serial_out(up, UART_DLM, value >> 8 & 0xff); } +#ifdef CONFIG_HAS_IOPORT static unsigned int hub6_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -351,6 +352,7 @@ static void hub6_serial_out(struct uart_port *p, int offset, int value) outb(p->hub6 - 1 + offset, p->iobase); outb(value, p->iobase + 1); } +#endif /* CONFIG_HAS_IOPORT */ static unsigned int mem_serial_in(struct uart_port *p, int offset) { @@ -400,6 +402,7 @@ static unsigned int mem32be_serial_in(struct uart_port *p, int offset) return ioread32be(p->membase + offset); } +#ifdef CONFIG_HAS_IOPORT static unsigned int io_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -411,6 +414,15 @@ static void io_serial_out(struct uart_port *p, int offset, int value) offset = offset << p->regshift; outb(value, p->iobase + offset); } +#endif +static unsigned int no_serial_in(struct uart_port *p, int offset) +{ + return (unsigned int)-1; +} + +static void no_serial_out(struct uart_port *p, int offset, int value) +{ +} static int serial8250_default_handle_irq(struct uart_port *port); @@ -422,10 +434,12 @@ static void set_io_from_upio(struct uart_port *p) up->dl_write = default_serial_dl_write; switch (p->iotype) { +#ifdef CONFIG_HAS_IOPORT case UPIO_HUB6: p->serial_in = hub6_serial_in; p->serial_out = hub6_serial_out; break; +#endif case UPIO_MEM: p->serial_in = mem_serial_in; @@ -446,11 +460,16 @@ static void set_io_from_upio(struct uart_port *p) p->serial_in = mem32be_serial_in; p->serial_out = mem32be_serial_out; break; - - default: +#ifdef CONFIG_HAS_IOPORT + case UPIO_PORT: p->serial_in = io_serial_in; p->serial_out = io_serial_out; break; +#endif + default: + WARN(1, "Unsupported UART type %x\n", p->iotype); + p->serial_in = no_serial_in; + p->serial_out = no_serial_out; } /* Remember loaded iotype */ up->cur_iotype = p->iotype; @@ -1174,7 +1193,7 @@ static void autoconfig(struct uart_8250_port *up) */ scratch = serial_in(up, UART_IER); serial_out(up, UART_IER, 0); -#ifdef __i386__ +#if defined(__i386__) && defined(CONFIG_HAS_IOPORT) outb(0xff, 0x080); #endif /* @@ -1183,7 +1202,7 @@ static void autoconfig(struct uart_8250_port *up) */ scratch2 = serial_in(up, UART_IER) & UART_IER_ALL_INTR; serial_out(up, UART_IER, UART_IER_ALL_INTR); -#ifdef __i386__ +#if defined(__i386__) && defined(CONFIG_HAS_IOPORT) outb(0, 0x080); #endif scratch3 = serial_in(up, UART_IER) & UART_IER_ALL_INTR; diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 47ff50763c048c89b19b7c9f13f462bc5368ab43..1eb20350fcf432d41cb416bed3be72ed8ab129bb 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -72,7 +72,7 @@ config SERIAL_8250_16550A_VARIANTS config SERIAL_8250_FINTEK bool "Support for Fintek variants" - depends on SERIAL_8250 + depends on SERIAL_8250 && HAS_IOPORT help Selecting this option will add support for the RS232 and RS485 capabilities of the Fintek F81216A LPC to 4 UART as well similar @@ -163,7 +163,7 @@ config SERIAL_8250_HP300 config SERIAL_8250_CS tristate "8250/16550 PCMCIA device support" - depends on PCMCIA && SERIAL_8250 + depends on PCMCIA && SERIAL_8250 && HAS_IOPORT help Say Y here to enable support for 16-bit PCMCIA serial devices, including serial port cards, modems, and the modem functions of diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 28e4beeabf8f373fc76e09ea7d1c9d55a66f4964..45f0f779fbf960e9fa66375dbc44c379edc63bef 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -877,7 +877,7 @@ config SERIAL_TXX9_STDSERIAL config SERIAL_JSM tristate "Digi International NEO and Classic PCI Support" - depends on PCI + depends on PCI && HAS_IOPORT select SERIAL_CORE help This is a driver for Digi International's Neo and Classic series diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 4ab65874a850b4402ca3a7d3bdda597d7d5093f9..743b4afaad4c89a6028e592be2cae2643614c89b 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -505,7 +505,11 @@ struct uart_port { * The remaining bits are serial-core specific and not modifiable by * userspace. */ +#ifdef CONFIG_HAS_IOPORT #define UPF_FOURPORT ((__force upf_t) ASYNC_FOURPORT /* 1 */ ) +#else +#define UPF_FOURPORT 0 +#endif #define UPF_SAK ((__force upf_t) ASYNC_SAK /* 2 */ ) #define UPF_SPD_HI ((__force upf_t) ASYNC_SPD_HI /* 4 */ ) #define UPF_SPD_VHI ((__force upf_t) ASYNC_SPD_VHI /* 5 */ )