From patchwork Mon Dec 9 10:34:53 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Janaki Ramaiah Thota X-Patchwork-Id: 848475 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 21E8721A95F; Mon, 9 Dec 2024 10:35:37 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=205.220.180.131 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733740539; cv=none; b=IAmzr64tR0ooeI6/ctRHX9G5/T3ENWfQtyxdE+9iBYfKaA7gw+HcJy/Y/dZhWzgcmT220+GXCkdM8mPWmb0z9K37LHrof5A8aZS83edQUi2Nx+/SOcdu0JVNidMIMSy8t77iKm2xZOSVmOtFCA3SYYcRXhoODeGKS6f//rPhEAM= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733740539; c=relaxed/simple; bh=dTeo2v/MfRql4oipuvpoxvdFnCHO9rrgLofXm+O1MbY=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=URg2Gj4iQOpiWR3dpzDFtPsA2H22jqjAZwZLUfZJ8dNQcabw0wqyWnEZ3NBNfhY6K5GYmk2wf+KJOVJyUIqKVbHMxZ/DJogWdEAy4sd91Nu6ZjvHzpWoJ3WmSmvVL2LwH2WXrocx5TuVskJpothkrHsg7882wllC5bvhI+oH4ic= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com; spf=pass smtp.mailfrom=quicinc.com; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b=Fm+DWuxK; arc=none smtp.client-ip=205.220.180.131 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=quicinc.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=quicinc.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="Fm+DWuxK" Received: from pps.filterd (m0279869.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 4B9AVasm004476; Mon, 9 Dec 2024 10:35:31 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h= cc:content-type:date:from:in-reply-to:message-id:mime-version :references:subject:to; s=qcppdkim1; bh=CVN3D00XlfoNE1ILjDPtcc1I 7ClBGSLsKSbRrr00VWI=; b=Fm+DWuxKIwFEaCLaHcvE1Sl9W2LqjyXkM7FfoYto VK6s2qkYtI7p+Fk9SLBRJKVGGixFJ0h49zDAv5Myq2qlpg+OL1MBitdadZMBYITC 07+jueMlUQuhYXBOdyO/Op5RtqbRU9OHwijonlnn46+s/jFQkFuwshq7ef41H6fg zbZaRrSIKLQUBAowJ6RaCtcQMwL6RjqAaiNXwg1s3pd6WmHgfUKTgm7wDbY+SdI6 MfUXS0jISPo3NaMyrH2lAk5FtGC0YfxIbSdAqZHy1Lq6SFr5k3UGjFtixAIIbrS+ TwMil4ySKHLJJ0SaTsWakERRLjcEtWshIKhx5JOgcISlzQ== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 43cdc6cc6r-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 09 Dec 2024 10:35:30 +0000 (GMT) Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA02.qualcomm.com (8.18.1.2/8.18.1.2) with ESMTPS id 4B9AZTEi008187 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 9 Dec 2024 10:35:29 GMT Received: from hu-janathot-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1544.9; Mon, 9 Dec 2024 02:35:24 -0800 From: Janaki Ramaiah Thota To: Liam Girdwood , Mark Brown , "Rob Herring" , Krzysztof Kozlowski , "Conor Dooley" , Bjorn Andersson , "Konrad Dybcio" , Marcel Holtmann , "Luiz Augusto von Dentz" , Bartosz Golaszewski CC: , , , Bartosz Golaszewski , , , , , Subject: [PATCH v5 2/4] arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node Date: Mon, 9 Dec 2024 16:04:53 +0530 Message-ID: <20241209103455.9675-3-quic_janathot@quicinc.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20241209103455.9675-1-quic_janathot@quicinc.com> References: <20241209103455.9675-1-quic_janathot@quicinc.com> Precedence: bulk X-Mailing-List: linux-bluetooth@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: vEvUTS2vusGMIG3lvuXcU-EIve1h-JTX X-Proofpoint-GUID: vEvUTS2vusGMIG3lvuXcU-EIve1h-JTX X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.60.29 definitions=2024-09-06_09,2024-09-06_01,2024-09-02_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 adultscore=0 mlxscore=0 mlxlogscore=999 malwarescore=0 bulkscore=0 lowpriorityscore=0 clxscore=1015 suspectscore=0 spamscore=0 phishscore=0 priorityscore=1501 impostorscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2411120000 definitions=main-2412090082 Add the PMU node for WCN6750 present on the qcs6490-rb3gen board and assign its power outputs to the Bluetooth module. In WCN6750 module sw_ctrl and wifi-enable pins are handled in the wifi controller firmware. Therefore, it is not required to have those pins' entries in the PMU node. Signed-off-by: Janaki Ramaiah Thota --- arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 168 ++++++++++++++++++- 1 file changed, 167 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts index 27695bd54220..8d9141557e3a 100644 --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: BSD-3-Clause /* - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved. */ /dts-v1/; @@ -33,6 +33,7 @@ aliases { serial0 = &uart5; + serial1 = &uart7; }; chosen { @@ -217,6 +218,63 @@ regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; }; + + wcn6750-pmu { + compatible = "qcom,wcn6750-pmu"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en>; + vddaon-supply = <&vreg_s7b_0p972>; + vddasd-supply = <&vreg_l11c_2p8>; + vddpmu-supply = <&vreg_s7b_0p972>; + vddrfa0p8-supply = <&vreg_s7b_0p972>; + vddrfa1p2-supply = <&vreg_s8b_1p272>; + vddrfa1p7-supply = <&vreg_s1b_1p872>; + vddrfa2p2-supply = <&vreg_s1c_2p19>; + + bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + + regulators { + vreg_pmu_rfa_cmn: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn"; + }; + + vreg_pmu_aon_0p59: ldo1 { + regulator-name = "vreg_pmu_aon_0p59"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p85: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p85"; + }; + + vreg_pmu_btcmx_0p85: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p85"; + }; + + vreg_pmu_rfa_0p8: ldo5 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo6 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo7 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + + vreg_pmu_pcie_0p9: ldo8 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_pcie_1p8: ldo9 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + }; + }; }; &apps_rsc { @@ -758,6 +816,39 @@ status = "okay"; }; +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + &qupv3_id_0 { status = "okay"; }; @@ -801,12 +892,87 @@ &tlmm { gpio-reserved-ranges = <32 2>, /* ADSP */ <48 4>; /* NFC */ + + bt_en: bt-en-state { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + qup_uart7_sleep: qup_uart7_sleep { + qup_uart7_sleep_cts: qup-uart7-sleep-cts-state { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-state { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-state { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-state { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + }; }; &uart5 { status = "okay"; }; +&uart7 { + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-1 = <&qup_uart7_sleep>; + pinctrl-names = "default", "sleep"; + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>; + vddaon-supply = <&vreg_pmu_aon_0p59>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + max-speed = <3200000>; + }; +}; + &usb_1 { status = "okay"; };