mbox series

[v1,0/2] mainline ti tsc2046 adc driver

Message ID 20210305133813.27967-1-o.rempel@pengutronix.de
Headers show
Series mainline ti tsc2046 adc driver | expand

Message

Oleksij Rempel March 5, 2021, 1:38 p.m. UTC 
TI TSC2046 is a touchscreen controller based on 8 channel ADC. Since most of
this ADC based touchscreen controller share same set of challenges, it
is better keep then as simple IIO ADC devices attached to a generic
resistive-adc-touch driver.

This driver can replace drivers/input/touchscreen/ads7846.c and has
following advantages over it:
- less code to maintain
- shared code paths (resistive-adc-touch, iio-hwmon, etc)
- can be used as plain IIO ADC to investigate signaling issues or test
  real capacity of the plates and attached low-pass filters
  (or use the touchscreen as a microphone if you like ;) )

Oleksij Rempel (2):
  dt-bindings:iio:adc: add documentation for TI TSC2046 controller
  iio: adc: add ADC driver for the TI TSC2046 controller

 .../bindings/iio/adc/ti,tsc2046.yaml          |  52 ++
 MAINTAINERS                                   |   8 +
 drivers/iio/adc/Kconfig                       |  12 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ti-tsc2046.c                  | 652 ++++++++++++++++++
 5 files changed, 725 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
 create mode 100644 drivers/iio/adc/ti-tsc2046.c