mbox series

[v5,0/3] media: i2c: Introduce driver for the TW9900 decoder

Message ID 20210401070802.1685823-1-maxime.chevallier@bootlin.com
Headers show
Series media: i2c: Introduce driver for the TW9900 decoder | expand

Message

Maxime Chevallier April 1, 2021, 7:07 a.m. UTC 
Hello everyone,

This is the fifth version of the series adding support for the Techwell
TW9900 multi standard decoder. It's a pretty simple decoder compared to
the TW9910, since it doesn't have a built-in scaler/crop engine.

this fifth version addresses reviews by Hans and Rob, with the notable
addition of the querystd ops for standard detection.

Any feedback is appreciated,

Thanks,

Maxime

Maxime Chevallier (3):
  dt-bindings: vendor-prefixes: Add techwell vendor prefix
  media: dt-bindings: media: i2c: Add bindings for TW9900
  media: i2c: Introduce a driver for the Techwell TW9900 decoder

 .../bindings/media/i2c/techwell,tw9900.yaml   |  63 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   6 +
 drivers/media/i2c/Kconfig                     |  11 +
 drivers/media/i2c/Makefile                    |   1 +
 drivers/media/i2c/tw9900.c                    | 664 ++++++++++++++++++
 6 files changed, 747 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
 create mode 100644 drivers/media/i2c/tw9900.c