[v3,0/5] Mediatek pinctrl patch on mt8195

This series includes 5 patches:
1.add pinctrl file and inding document on mt8195.
2.add pinctrl device node on mt8195.
3.add pinctrl driver on MT8195.
4.add pinctrl drive for I2C related pins on MT8195.
5.add pinctrl rsel setting on MT8195.

Changes in patch v3:
1)change '^pins' to '-pins$'.
2)change 'state_0_node_a' to 'gpio_pin' which is defined in dts.
3)change 'state_0_node_b' to 'i2c0_pin' which is defined in dts.
4)reorder this series patches. change pinctrl file and binding document
together in one patch.

There are no changes in v1 & v2.

Zhiyong Tao (5):
  dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
  arm64: dts: mt8195: add pinctrl device node
  pinctrl: add pinctrl driver on mt8195
  pinctrl: add drive for I2C related pins on MT8195
  pinctrl: add rsel setting on MT8195

 .../bindings/pinctrl/pinctrl-mt8195.yaml      |  152 ++
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      |   21 +
 drivers/pinctrl/mediatek/Kconfig              |    6 +
 drivers/pinctrl/mediatek/Makefile             |    1 +
 drivers/pinctrl/mediatek/pinctrl-mt8195.c     |  872 +++++++++
 .../pinctrl/mediatek/pinctrl-mtk-common-v2.c  |   28 +
 .../pinctrl/mediatek/pinctrl-mtk-common-v2.h  |   15 +
 drivers/pinctrl/mediatek/pinctrl-mtk-mt8195.h | 1669 +++++++++++++++++
 drivers/pinctrl/mediatek/pinctrl-paris.c      |   16 +
 include/dt-bindings/pinctrl/mt8195-pinfunc.h  |  962 ++++++++++
 10 files changed, 3742 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt8195.c
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt8195.h
 create mode 100644 include/dt-bindings/pinctrl/mt8195-pinfunc.h

--
2.18.0

On Sun, 11 Apr 2021 17:26:55 +0800, Zhiyong Tao wrote:
> 1. This patch adds pinctrl file for mt8195.
> 2. This patch adds mt8195 compatible node in binding document.
> 
> Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
> ---
>  .../bindings/pinctrl/pinctrl-mt8195.yaml      | 152 +++
>  include/dt-bindings/pinctrl/mt8195-pinfunc.h  | 962 ++++++++++++++++++
>  2 files changed, 1114 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
>  create mode 100644 include/dt-bindings/pinctrl/mt8195-pinfunc.h
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.example.dt.yaml: pinctrl@10005000: reg: [[268455936, 4096], [298909696, 4096], [299040768, 4096], [299106304, 4096], [300023808, 4096], [300023808, 4096], [300613632, 4096], [301203456, 4096], [268480512, 4096]] is too long
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml

See https://patchwork.ozlabs.org/patch/1464777

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.