mbox series

[v3,0/4] convert grf.txt to YAML

Message ID 20210508123743.18128-1-jbx6244@gmail.com
Headers show
Series convert grf.txt to YAML | expand

Message

Johan Jonker May 8, 2021, 12:37 p.m. UTC 
Changed V3:
  remove select
  change unevaluatedProperties
  add separate schemas for each 'if' subset

Changed V2:
  add rockchip,rk3328-grf-gpio.yaml
  rename grf-gpio nodename

Johan Jonker (4):
  dt-bindings: gpio: convert rk3328-grf-gpio.txt to YAML
  dt-bindings: soc: rockchip: convert grf.txt to YAML
  ARM: dts: rockchip: add grf register compatible for rk3066/rk3188
  arm64: dts: rename grf-gpio nodename in rk3328.dtsi

 .../bindings/gpio/rockchip,rk3328-grf-gpio.txt     |  32 ---
 .../bindings/gpio/rockchip,rk3328-grf-gpio.yaml    |  51 ++++
 .../devicetree/bindings/soc/rockchip/grf.txt       |  61 -----
 .../devicetree/bindings/soc/rockchip/grf.yaml      | 262 +++++++++++++++++++++
 arch/arm/boot/dts/rk3xxx.dtsi                      |   2 +-
 arch/arm64/boot/dts/rockchip/rk3328.dtsi           |   2 +-
 6 files changed, 315 insertions(+), 95 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml
 delete mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.txt
 create mode 100644 Documentation/devicetree/bindings/soc/rockchip/grf.yaml

Comments

Johan Jonker May 8, 2021, 12:37 p.m. UTC | #1 
A test with the command below gives this error:

/arch/arm64/boot/dts/rockchip/rk3328-a1.dt.yaml: syscon@ff100000:
grf-gpio: {'compatible': ['rockchip,rk3328-grf-gpio'],
'gpio-controller': True, '#gpio-cells': [[2]], 'phandle': [[68]]} is not
of type 'array'