mbox series

[0/2] iio: frequency: adrf6780: add support for ADRF6780

Message ID 20210629142308.25868-1-antoniu.miclaus@analog.com
Headers show
Series iio: frequency: adrf6780: add support for ADRF6780 | expand

Message

Antoniu Miclaus June 29, 2021, 2:23 p.m. UTC
Add support for the ADRF6780 microwave upconverter.

Antoniu Miclaus (2):
  iio: frequency: adrf6780: add support for ADRF6780
  dt-bindings: iio: frequency: add adrf6780 doc

 .../bindings/iio/frequency/adi,adrf6780.yaml  | 133 +++++
 drivers/iio/frequency/Kconfig                 |  13 +
 drivers/iio/frequency/Makefile                |   1 +
 drivers/iio/frequency/adrf6780.c              | 534 ++++++++++++++++++
 4 files changed, 681 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/frequency/adi,adrf6780.yaml
 create mode 100644 drivers/iio/frequency/adrf6780.c

Comments

Alexandru Ardelean June 30, 2021, 8:38 a.m. UTC | #1
On Tue, Jun 29, 2021 at 5:25 PM Antoniu Miclaus
<antoniu.miclaus@analog.com> wrote:
>

> Add support for the ADRF6780 microwave upconverter.


Hey,

A few comments inline.
The description of the commit could have a bit more information.
Maybe a short description of the chip (typically I'd adapt something
from the datasheet).
And maybe a link to the datasheet.

>

> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>

> ---

>  drivers/iio/frequency/Kconfig    |  13 +

>  drivers/iio/frequency/Makefile   |   1 +

>  drivers/iio/frequency/adrf6780.c | 534 +++++++++++++++++++++++++++++++

>  3 files changed, 548 insertions(+)

>  create mode 100644 drivers/iio/frequency/adrf6780.c

>

> diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig

> index 240b81502512..fc9751c48f59 100644

> --- a/drivers/iio/frequency/Kconfig

> +++ b/drivers/iio/frequency/Kconfig

> @@ -49,5 +49,18 @@ config ADF4371

>

>           To compile this driver as a module, choose M here: the

>           module will be called adf4371.

> +

> +config ADRF6780

> +        tristate "Analog Devices ADRF6780 Microwave Upconverter"

> +        depends on SPI

> +        depends on COMMON_CLK

> +        depends on OF

> +        help

> +          Say yes here to build support for Analog Devices ADRF6780

> +          5.9 GHz to 23.6 GHz, Wideband, Microwave Upconverter.

> +

> +          To compile this driver as a module, choose M here: the

> +          module will be called adrf6780.

> +

>  endmenu

>  endmenu

> diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile

> index 518b1e50caef..ae3136c79202 100644

> --- a/drivers/iio/frequency/Makefile

> +++ b/drivers/iio/frequency/Makefile

> @@ -7,3 +7,4 @@

>  obj-$(CONFIG_AD9523) += ad9523.o

>  obj-$(CONFIG_ADF4350) += adf4350.o

>  obj-$(CONFIG_ADF4371) += adf4371.o

> +obj-$(CONFIG_ADRF6780) += adrf6780.o

> diff --git a/drivers/iio/frequency/adrf6780.c b/drivers/iio/frequency/adrf6780.c

> new file mode 100644

> index 000000000000..c492c4e4adf1

> --- /dev/null

> +++ b/drivers/iio/frequency/adrf6780.c

> @@ -0,0 +1,534 @@

> +// SPDX-License-Identifier: GPL-2.0+


about the licensing;

SPDX-License-Identifier: GPL-2.0+    ==   MODULE_LICENSE("GPL v2");
SPDX-License-Identifier: GPL-2.0    ==   MODULE_LICENSE("GPL v2");

I usually don't care about this licensing details, but it seems to be
important elsewhere.

> +/*

> + * ADRF6780 driver


This could be   "Analog Devices ADRF6780 driver"

> + *

> + * Copyright 2021 Analog Devices Inc.

> + */

> +

> +#include <linux/bitfield.h>

> +#include <linux/bits.h>

> +#include <linux/clk.h>

> +#include <linux/clkdev.h>

> +#include <linux/clk-provider.h>

> +#include <linux/delay.h>

> +#include <linux/device.h>

> +#include <linux/iio/iio.h>

> +#include <linux/module.h>

> +#include <linux/regmap.h>

> +#include <linux/spi/spi.h>


Not all these headers look used.
For one thing, regmap.h doesn't look used at all.
Maybe trim the list.

> +

> +/* ADRF6780 Register Map */

> +#define ADRF6780_REG_CONTROL                   0x00

> +#define ADRF6780_REG_ALARM_READBACK            0x01

> +#define ADRF6780_REG_ALARM_MASKS               0x02

> +#define ADRF6780_REG_ENABLE                    0x03

> +#define ADRF6780_REG_LINEARIZE                 0x04

> +#define ADRF6780_REG_LO_PATH                   0x05

> +#define ADRF6780_REG_ADC_CONTROL               0x06

> +#define ADRF6780_REG_ADC_OUTPUT                        0x0C

> +

> +/* ADRF6780_REG_CONTROL Map */

> +#define ADRF6780_PARITY_EN_MSK                 BIT(15)

> +#define ADRF6780_PARITY_EN(x)                  FIELD_PREP(ADRF6780_PARITY_EN_MSK, x)

> +#define ADRF6780_SOFT_RESET_MSK                        BIT(14)

> +#define ADRF6780_SOFT_RESET(x)                 FIELD_PREP(ADRF6780_SOFT_RESET_MSK, x)

> +#define ADRF6780_CHIP_ID_MSK                   GENMASK(11, 4)

> +#define ADRF6780_CHIP_ID                       0xA

> +#define ADRF6780_CHIP_REVISION_MSK             GENMASK(3, 0)

> +#define ADRF6780_CHIP_REVISION(x)              FIELD_PREP(ADRF6780_CHIP_REVISION_MSK, x)

> +

> +/* ADRF6780_REG_ALARM_READBACK Map */

> +#define ADRF6780_PARITY_ERROR_MSK              BIT(15)

> +#define ADRF6780_PARITY_ERROR(x)               FIELD_PREP(ADRF6780_PARITY_ERROR_MSK, x)

> +#define ADRF6780_TOO_FEW_ERRORS_MSK            BIT(14)

> +#define ADRF6780_TOO_FEW_ERRORS(x)             FIELD_PREP(ADRF6780_TOO_FEW_ERRORS_MSK, x)

> +#define ADRF6780_TOO_MANY_ERRORS_MSK           BIT(13)

> +#define ADRF6780_TOO_MANY_ERRORS(x)            FIELD_PREP(ADRF6780_TOO_MANY_ERRORS_MSK, x)

> +#define ADRF6780_ADDRESS_RANGE_ERROR_MSK       BIT(12)

> +#define ADRF6780_ADDRESS_RANGE_ERROR(x)                FIELD_PREP(ADRF6780_ADDRESS_RANGE_ERROR_MSK, x)

> +

> +/* ADRF6780_REG_ENABLE Map */

> +#define ADRF6780_VGA_BUFFER_EN_MSK             BIT(8)

> +#define ADRF6780_VGA_BUFFER_EN(x)              FIELD_PREP(ADRF6780_VGA_BUFFER_EN_MSK, x)

> +#define ADRF6780_DETECTOR_EN_MSK               BIT(7)

> +#define ADRF6780_DETECTOR_EN(x)                        FIELD_PREP(ADRF6780_DETECTOR_EN_MSK, x)

> +#define ADRF6780_LO_BUFFER_EN_MSK              BIT(6)

> +#define ADRF6780_LO_BUFFER_EN(x)               FIELD_PREP(ADRF6780_LO_BUFFER_EN_MSK, x)

> +#define ADRF6780_IF_MODE_EN_MSK                        BIT(5)

> +#define ADRF6780_IF_MODE_EN(x)                 FIELD_PREP(ADRF6780_IF_MODE_EN_MSK, x)

> +#define ADRF6780_IQ_MODE_EN_MSK                        BIT(4)

> +#define ADRF6780_IQ_MODE_EN(x)                 FIELD_PREP(ADRF6780_IQ_MODE_EN_MSK, x)

> +#define ADRF6780_LO_X2_EN_MSK                  BIT(3)

> +#define ADRF6780_LO_X2_EN(x)                   FIELD_PREP(ADRF6780_LO_X2_EN_MSK, x)

> +#define ADRF6780_LO_PPF_EN_MSK                 BIT(2)

> +#define ADRF6780_LO_PPF_EN(x)                  FIELD_PREP(ADRF6780_LO_PPF_EN_MSK, x)

> +#define ADRF6780_LO_EN_MSK                     BIT(1)

> +#define ADRF6780_LO_EN(x)                      FIELD_PREP(ADRF6780_LO_EN_MSK, x)

> +#define ADRF6780_UC_BIAS_EN_MSK                        BIT(0)

> +#define ADRF6780_UC_BIAS_EN(x)                 FIELD_PREP(ADRF6780_UC_BIAS_EN_MSK, x)

> +

> +/* ADRF6780_REG_LINEARIZE Map */

> +#define ADRF6780_RDAC_LINEARIZE_MSK            GENMASK(7, 0)

> +#define ADRF6780_RDAC_LINEARIZE(x)             FIELD_PREP(ADRF6780_RDAC_LINEARIZE_MSK, x)

> +

> +/* ADRF6780_REG_LO_PATH Map */

> +#define ADRF6780_LO_SIDEBAND_MSK               BIT(10)

> +#define ADRF6780_LO_SIDEBAND(x)                        FIELD_PREP(ADRF6780_LO_SIDEBAND_MSK, x)

> +#define ADRF6780_Q_PATH_PHASE_ACCURACY_MSK     GENMASK(7, 4)

> +#define ADRF6780_Q_PATH_PHASE_ACCURACY(x)      FIELD_PREP(ADRF6780_Q_PATH_PHASE_ACCURACY_MSK, x)

> +#define ADRF6780_I_PATH_PHASE_ACCURACY_MSK     GENMASK(3, 0)

> +#define ADRF6780_I_PATH_PHASE_ACCURACY(x)      FIELD_PREP(ADRF6780_I_PATH_PHASE_ACCURACY_MSK, x)

> +

> +/* ADRF6780_REG_ADC_CONTROL Map */

> +#define ADRF6780_VDET_OUTPUT_SELECT_MSK                BIT(3)

> +#define ADRF6780_VDET_OUTPUT_SELECT(x)         FIELD_PREP(ADRF6780_VDET_OUTPUT_SELECT_MSK, x)

> +#define ADRF6780_ADC_START_MSK                 BIT(2)

> +#define ADRF6780_ADC_START(x)                  FIELD_PREP(ADRF6780_ADC_START_MSK, x)

> +#define ADRF6780_ADC_EN_MSK                    BIT(1)

> +#define ADRF6780_ADC_EN(x)                     FIELD_PREP(ADRF6780_ADC_EN_MSK, x)

> +#define ADRF6780_ADC_CLOCK_EN_MSK              BIT(0)

> +#define ADRF6780_ADC_CLOCK_EN(x)               FIELD_PREP(ADRF6780_ADC_CLOCK_EN_MSK, x)

> +

> +/* ADRF6780_REG_ADC_OUTPUT Map */

> +#define ADRF6780_ADC_STATUS_MSK                        BIT(8)

> +#define ADRF6780_ADC_STATUS(x)                 FIELD_PREP(ADRF6780_ADC_STATUS_MSK, x)

> +#define ADRF6780_ADC_VALUE_MSK                 GENMASK(7, 0)

> +#define ADRF6780_ADC_VALUE(x)                  FIELD_PREP(ADRF6780_ADC_VALUE_MSK, x)


The indentation for the bit-values doesn't look consistent in all places.

> +

> +enum supported_parts {

> +       ADRF6780,

> +};


This enum doesn't seem used anywhere

> +

> +struct adrf6780_dev {

> +       struct spi_device       *spi;

> +       struct clk              *clkin;

> +       /* Protect against concurrent accesses to the device */

> +       struct mutex            lock;

> +       bool                    parity_en;


Maybe remove this parity check.
There are many drivers that support some form of simple error
checking, but in the kernel this is typically left up to the SPI
framework.
So, I'd just disable the error checking entirely.

> +       bool                    vga_buff_en;

> +       bool                    det_en;

> +       bool                    lo_buff_en;

> +       bool                    if_mode_en;

> +       bool                    iq_mode_en;

> +       bool                    lo_x2_en;

> +       bool                    lo_ppf_en;

> +       bool                    lo_en;

> +       bool                    uc_bias_en;

> +       bool                    lo_sideband;

> +       bool                    vdet_out_en;

> +};

> +

> +static int adrf6780_spi_read(struct adrf6780_dev *dev, unsigned int reg,

> +                             unsigned int *val)

> +{

> +       int ret;

> +       unsigned int cnt, temp;

> +       struct spi_transfer t = {0};

> +       u8 data[3];

> +

> +       data[0] = 0x80 | (reg << 1);

> +       data[1] = 0x0;

> +       data[2] = 0x0;

> +

> +       t.rx_buf = &data[0];

> +       t.tx_buf = &data[0];

> +       t.len = 3;

> +

> +       ret = spi_sync_transfer(dev->spi, &t, 1);

> +       if (ret < 0)

> +               return ret;

> +

> +       temp = ((data[0] | 0x80 | (reg << 1)) << 16) |

> +               (data[1] << 8) | data[2];

> +

> +       if (dev->parity_en) {

> +               cnt = hweight_long(temp);

> +               if (!(cnt % 2))

> +                       return -EINVAL;

> +       }

> +

> +       *val = (temp >> 1) & 0xFFFF;

> +

> +       return ret;

> +}

> +

> +static int adrf6780_spi_write(struct adrf6780_dev *dev,

> +                                     unsigned int reg,

> +                                     unsigned int val)

> +{

> +       unsigned int cnt;

> +       u8 data[3];

> +

> +       val = (val << 1);

> +

> +       if (dev->parity_en) {

> +               cnt = hweight_long((reg << 17) | val);

> +               if (cnt % 2 == 0)

> +                       val |= 0x1;

> +       }

> +

> +       data[0] = (reg << 1) | (val >> 16);

> +       data[1] = val >> 8;

> +       data[2] = val;

> +

> +       return spi_write(dev->spi, &data[0], 3);

> +}

> +

> +static int __adrf6780_spi_update_bits(struct adrf6780_dev *dev, unsigned int reg,

> +                              unsigned int mask, unsigned int val)

> +{

> +       int ret;

> +       unsigned int data, temp;

> +

> +       ret = adrf6780_spi_read(dev, reg, &data);

> +       if (ret < 0)

> +               return ret;

> +

> +       temp = (data & ~mask) | (val & mask);

> +

> +       return adrf6780_spi_write(dev, reg, temp);

> +}

> +

> +static int adrf6780_spi_update_bits(struct adrf6780_dev *dev, unsigned int reg,

> +                              unsigned int mask, unsigned int val)

> +{

> +       int ret;

> +

> +       mutex_lock(&dev->lock);

> +       ret = __adrf6780_spi_update_bits(dev, reg, mask, val);

> +       mutex_unlock(&dev->lock);

> +       return ret;

> +}

> +

> +static int adrf6780_read_raw(struct iio_dev *indio_dev,

> +                           struct iio_chan_spec const *chan,

> +                           int *val, int *val2, long info)

> +{

> +       struct adrf6780_dev *dev = iio_priv(indio_dev);

> +       unsigned int data;

> +       int ret;

> +

> +       switch (info) {

> +       case IIO_CHAN_INFO_RAW:

> +               mutex_lock(&dev->lock);

> +

> +               ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_ENABLE,

> +                                               ADRF6780_DETECTOR_EN_MSK,

> +                                               ADRF6780_DETECTOR_EN(1));


The detector seems to be enabled here regardless of the 'det_en' value.
And it doesn't seem to put the value back to a 'det_en' state.

But the question is, if it would make sense to always enable the detector?
In any case enabling the detector in IIO_CHAN_INFO_RAW doesn't look
like a good idea.

> +               if (ret < 0)

> +                       goto exit;

> +

> +               ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_ADC_CONTROL,

> +                                               ADRF6780_ADC_EN_MSK,

> +                                               ADRF6780_ADC_EN(1));

> +               if (ret < 0)

> +                       goto exit;

> +

> +               ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_ADC_CONTROL,

> +                                               ADRF6780_ADC_CLOCK_EN_MSK,

> +                                               ADRF6780_ADC_CLOCK_EN(1));

> +               if (ret < 0)

> +                       goto exit;

> +

> +               ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_ADC_CONTROL,

> +                                               ADRF6780_ADC_START_MSK,

> +                                               ADRF6780_ADC_START(1));

> +               if (ret < 0)

> +                       goto exit;


This looks like 3 SPI operations on the same register.
Would it work to group them in a single operation?

> +

> +               usleep_range(200, 250);

> +

> +               ret = adrf6780_spi_read(dev, ADRF6780_REG_ADC_OUTPUT, &data);

> +               if (ret < 0)

> +                       goto exit;

> +

> +               if (!(data & ADRF6780_ADC_STATUS_MSK)) {

> +                       ret = -EINVAL;

> +                       goto exit;

> +               }

> +

> +               ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_ADC_CONTROL,

> +                                               ADRF6780_ADC_START_MSK,

> +                                               ADRF6780_ADC_START(0));

> +               if (ret < 0)

> +                       goto exit;

> +

> +               ret = adrf6780_spi_read(dev, ADRF6780_REG_ADC_OUTPUT, &data);

> +               if (ret < 0)

> +                       goto exit;

> +

> +               mutex_unlock(&dev->lock);

> +

> +               *val = data & ADRF6780_ADC_VALUE_MSK;

> +

> +               return IIO_VAL_INT;

> +exit:

> +               mutex_unlock(&dev->lock);

> +               return ret;

> +       case IIO_CHAN_INFO_SCALE:

> +               ret = adrf6780_spi_read(dev, ADRF6780_REG_LINEARIZE, &data);

> +               if (ret < 0)

> +                       return ret;

> +

> +               *val = data & ADRF6780_RDAC_LINEARIZE_MSK;

> +

> +               return IIO_VAL_INT;

> +       case IIO_CHAN_INFO_PHASE:

> +               ret = adrf6780_spi_read(dev, ADRF6780_REG_LO_PATH, &data);

> +               if (ret < 0)

> +                       return ret;

> +

> +               if (chan->channel2 == IIO_MOD_I)

> +                       *val = data & ADRF6780_I_PATH_PHASE_ACCURACY_MSK;

> +               else

> +                       *val = (data & ADRF6780_Q_PATH_PHASE_ACCURACY_MSK) >> 4;

> +

> +               return IIO_VAL_INT;

> +       default:

> +               return -EINVAL;

> +       }

> +}

> +

> +static int adrf6780_write_raw(struct iio_dev *indio_dev,

> +                            struct iio_chan_spec const *chan,

> +                            int val, int val2, long info)

> +{

> +       struct adrf6780_dev *dev = iio_priv(indio_dev);

> +       int ret;

> +

> +       switch (info) {

> +       case IIO_CHAN_INFO_SCALE:

> +               return adrf6780_spi_write(dev, ADRF6780_REG_LINEARIZE, val);

> +       case IIO_CHAN_INFO_PHASE:

> +               if (chan->channel2 == IIO_MOD_I)

> +                       ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_LO_PATH,

> +                                                       ADRF6780_I_PATH_PHASE_ACCURACY_MSK,

> +                                                       ADRF6780_I_PATH_PHASE_ACCURACY(val));

> +               else

> +                       ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_LO_PATH,

> +                                                       ADRF6780_Q_PATH_PHASE_ACCURACY_MSK,

> +                                                       ADRF6780_Q_PATH_PHASE_ACCURACY(val));

> +               return ret;

> +       default:

> +               return -EINVAL;

> +       }

> +}

> +

> +static int adrf6780_reg_access(struct iio_dev *indio_dev,

> +                               unsigned int reg,

> +                               unsigned int write_val,

> +                               unsigned int *read_val)

> +{

> +       struct adrf6780_dev *dev = iio_priv(indio_dev);

> +

> +       if (read_val)

> +               return adrf6780_spi_read(dev, reg, read_val);

> +       else

> +               return adrf6780_spi_write(dev, reg, write_val);

> +}

> +

> +static const struct iio_info adrf6780_info = {

> +       .read_raw = adrf6780_read_raw,

> +       .write_raw = adrf6780_write_raw,

> +       .debugfs_reg_access = &adrf6780_reg_access,

> +};

> +

> +#define ADRF6780_CHAN(_channel) {                      \

> +       .type = IIO_VOLTAGE,                            \

> +       .output = 1,                                    \

> +       .indexed = 1,                                   \

> +       .channel = _channel,                            \

> +       .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |  \

> +               BIT(IIO_CHAN_INFO_SCALE)                \

> +}

> +

> +#define ADRF6780_CHAN_IQ(_channel, rf_comp) {                  \

> +       .type = IIO_ALTVOLTAGE,                                 \

> +       .modified = 1,                                          \

> +       .output = 1,                                            \

> +       .indexed = 1,                                           \

> +       .channel2 = IIO_MOD_##rf_comp,                          \

> +       .channel = _channel,                                    \

> +       .info_mask_separate = BIT(IIO_CHAN_INFO_PHASE)          \

> +}

> +

> +static const struct iio_chan_spec adrf6780_channels[] = {

> +       ADRF6780_CHAN(0),

> +       ADRF6780_CHAN_IQ(0, I),

> +       ADRF6780_CHAN_IQ(0, Q),

> +};

> +

> +static int adrf6780_init(struct adrf6780_dev *dev)

> +{

> +       int ret;

> +       unsigned int chip_id, enable_reg, enable_reg_msk;

> +       struct spi_device *spi = dev->spi;

> +       bool temp_parity = dev->parity_en;

> +

> +       dev->parity_en = false;

> +

> +       /* Perform a software reset */

> +       ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_CONTROL,

> +                                ADRF6780_SOFT_RESET_MSK,

> +                                ADRF6780_SOFT_RESET(1));

> +       if (ret < 0) {

> +               dev_err(&spi->dev, "ADRF6780 SPI software reset failed.\n");

> +               return ret;

> +       }

> +

> +       ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_CONTROL,

> +                                ADRF6780_SOFT_RESET_MSK,

> +                                ADRF6780_SOFT_RESET(0));

> +       if (ret < 0) {

> +               dev_err(&spi->dev, "ADRF6780 SPI software reset disable failed.\n");

> +               return ret;

> +       }


I'd create a adrf6780_reset() function.
The driver has a reset pin, which [optionally] can be implemented [now
or later].
Typically, these resets are implemented is:

if (gpio)
   gpio_reset()
  return

software_reset()


> +

> +       ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_CONTROL,

> +                                ADRF6780_PARITY_EN_MSK,

> +                                ADRF6780_PARITY_EN(temp_parity));

> +       if (ret < 0)

> +               return ret;

> +

> +       dev->parity_en = temp_parity;

> +

> +       ret = adrf6780_spi_read(dev, ADRF6780_REG_CONTROL, &chip_id);

> +       if (ret < 0)

> +               return ret;

> +

> +       chip_id = (chip_id & ADRF6780_CHIP_ID_MSK) >> 4;

> +       if (chip_id != ADRF6780_CHIP_ID) {

> +               dev_err(&spi->dev, "ADRF6780 Invalid Chip ID.\n");

> +               return -EINVAL;

> +       }

> +

> +       enable_reg_msk = ADRF6780_VGA_BUFFER_EN_MSK |

> +                       ADRF6780_DETECTOR_EN_MSK |

> +                       ADRF6780_LO_BUFFER_EN_MSK |

> +                       ADRF6780_IF_MODE_EN_MSK |

> +                       ADRF6780_IQ_MODE_EN_MSK |

> +                       ADRF6780_LO_X2_EN_MSK |

> +                       ADRF6780_LO_PPF_EN_MSK |

> +                       ADRF6780_LO_EN_MSK |

> +                       ADRF6780_UC_BIAS_EN_MSK;

> +

> +       enable_reg = ADRF6780_VGA_BUFFER_EN(dev->vga_buff_en) |

> +                       ADRF6780_DETECTOR_EN(dev->det_en) |

> +                       ADRF6780_LO_BUFFER_EN(dev->lo_buff_en) |

> +                       ADRF6780_IF_MODE_EN(dev->if_mode_en) |

> +                       ADRF6780_IQ_MODE_EN(dev->iq_mode_en) |

> +                       ADRF6780_LO_X2_EN(dev->lo_x2_en) |

> +                       ADRF6780_LO_PPF_EN(dev->lo_ppf_en) |

> +                       ADRF6780_LO_EN(dev->lo_en) |

> +                       ADRF6780_UC_BIAS_EN(dev->uc_bias_en);

> +

> +       ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_ENABLE, enable_reg_msk, enable_reg);

> +       if (ret < 0)

> +               return ret;

> +

> +       ret = __adrf6780_spi_update_bits(dev, ADRF6780_REG_LO_PATH,

> +                                               ADRF6780_LO_SIDEBAND_MSK,

> +                                               ADRF6780_LO_SIDEBAND(dev->lo_sideband));

> +       if (ret < 0)

> +               return ret;

> +

> +       return __adrf6780_spi_update_bits(dev, ADRF6780_REG_ADC_CONTROL,

> +                                               ADRF6780_VDET_OUTPUT_SELECT_MSK,

> +                                               ADRF6780_VDET_OUTPUT_SELECT(dev->vdet_out_en));

> +}

> +

> +static void adrf6780_clk_disable(void *data)

> +{

> +       clk_disable_unprepare(data);

> +}

> +

> +static int adrf6780_dt_parse(struct adrf6780_dev *dev)

> +{

> +       struct spi_device *spi = dev->spi;

> +

> +       dev->parity_en = of_property_read_bool(spi->dev.of_node, "adi,parity-en");

> +       dev->vga_buff_en = of_property_read_bool(spi->dev.of_node, "adi,vga-buff-en");

> +       dev->det_en = of_property_read_bool(spi->dev.of_node, "adi,det-en");

> +       dev->lo_buff_en = of_property_read_bool(spi->dev.of_node, "adi,lo-buff-en");

> +       dev->if_mode_en = of_property_read_bool(spi->dev.of_node, "adi,if-mode-en");

> +       dev->iq_mode_en = of_property_read_bool(spi->dev.of_node, "adi,iq-mode-en");

> +       dev->lo_x2_en = of_property_read_bool(spi->dev.of_node, "adi,lo-x2-en");

> +       dev->lo_ppf_en = of_property_read_bool(spi->dev.of_node, "adi,lo-ppf-en");

> +       dev->lo_en = of_property_read_bool(spi->dev.of_node, "adi,lo-en");

> +       dev->uc_bias_en = of_property_read_bool(spi->dev.of_node, "adi,uc-bias-en");

> +       dev->lo_sideband = of_property_read_bool(spi->dev.of_node, "adi,lo-sideband");

> +       dev->vdet_out_en = of_property_read_bool(spi->dev.of_node, "adi,vdet-out-en");


I'm not sure this is the best way to control these from the DT.
So, the parity can be disabled/removed.
Maybe the detector can always be enabled.

The others may make sense to be enabled.

> +

> +       dev->clkin = devm_clk_get(&spi->dev, "lo_in");

> +       if (IS_ERR(dev->clkin))

> +               return PTR_ERR(dev->clkin);


Initializing a clock in the adrf6780_dt_parse() function is weird.
Mabe move this to the main probe function.

> +

> +       return 0;

> +}

> +

> +static int adrf6780_probe(struct spi_device *spi)

> +{

> +       struct iio_dev *indio_dev;

> +       struct adrf6780_dev *dev;

> +       int ret;

> +

> +       indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*dev));

> +       if (!indio_dev)

> +               return -ENOMEM;

> +

> +       dev = iio_priv(indio_dev);

> +

> +       indio_dev->dev.parent = &spi->dev;


this assignment can be removed in the upstream version of this driver;
the assignment is done inside  devm_iio_device_alloc()


> +       indio_dev->info = &adrf6780_info;

> +       indio_dev->name = "adrf6780";

> +       indio_dev->channels = adrf6780_channels;

> +       indio_dev->num_channels = ARRAY_SIZE(adrf6780_channels);

> +

> +       dev->spi = spi;

> +

> +       ret = adrf6780_dt_parse(dev);

> +       if (ret < 0)

> +               return ret;

> +

> +       ret = clk_prepare_enable(dev->clkin);

> +       if (ret < 0)

> +               return ret;

> +

> +       ret = devm_add_action_or_reset(&spi->dev, adrf6780_clk_disable, dev->clkin);

> +       if (ret < 0)

> +               return ret;

> +

> +       mutex_init(&dev->lock);

> +

> +       ret = adrf6780_init(dev);

> +       if (ret < 0)

> +               return ret;

> +

> +       return devm_iio_device_register(&spi->dev, indio_dev);

> +}

> +

> +static const struct spi_device_id adrf6780_id[] = {

> +       { "adrf6780", ADRF6780 },

> +       {}

> +};

> +MODULE_DEVICE_TABLE(spi, adrf6780_id);

> +

> +static const struct of_device_id adrf6780_of_match[] = {

> +       { .compatible = "adi,adrf6780" },

> +       {},


you can remove the comma from this null terminator

> +};

> +MODULE_DEVICE_TABLE(of, adrf6780_of_match);

> +

> +static struct spi_driver adrf6780_driver = {

> +       .driver = {

> +               .name = "adrf6780",

> +               .of_match_table = adrf6780_of_match,

> +       },

> +       .probe = adrf6780_probe,

> +       .id_table = adrf6780_id,

> +};

> +module_spi_driver(adrf6780_driver);

> +

> +MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@analog.com");

> +MODULE_DESCRIPTION("Analog Devices ADRF6780");

> +MODULE_LICENSE("GPL v2");

> --

> 2.32.0

>
Nuno Sa June 30, 2021, 12:04 p.m. UTC | #2
Hey Alex,

Thanks for the review,

> From: Alexandru Ardelean <ardeleanalex@gmail.com>

> Sent: Wednesday, June 30, 2021 10:38 AM

> To: Miclaus, Antoniu <Antoniu.Miclaus@analog.com>

> Cc: linux-iio <linux-iio@vger.kernel.org>; LKML <linux-

> kernel@vger.kernel.org>; Jonathan Cameron <jic23@kernel.org>;

> devicetree <devicetree@vger.kernel.org>; Rob Herring

> <robh+dt@kernel.org>

> Subject: Re: [PATCH 1/2] iio: frequency: adrf6780: add support for

> ADRF6780

> 

> On Tue, Jun 29, 2021 at 5:25 PM Antoniu Miclaus

> <antoniu.miclaus@analog.com> wrote:

> >

> > Add support for the ADRF6780 microwave upconverter.

> 

> Hey,

> 

> A few comments inline.

> The description of the commit could have a bit more information.

> Maybe a short description of the chip (typically I'd adapt something

> from the datasheet).

> And maybe a link to the datasheet.

> 

> >

> > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>

> > ---

> >  drivers/iio/frequency/Kconfig    |  13 +

> >  drivers/iio/frequency/Makefile   |   1 +

> >  drivers/iio/frequency/adrf6780.c | 534

> +++++++++++++++++++++++++++++++

> >  3 files changed, 548 insertions(+)

> >  create mode 100644 drivers/iio/frequency/adrf6780.c

> >

> > diff --git a/drivers/iio/frequency/Kconfig

> b/drivers/iio/frequency/Kconfig

> > index 240b81502512..fc9751c48f59 100644

> > --- a/drivers/iio/frequency/Kconfig

> > +++ b/drivers/iio/frequency/Kconfig

> > @@ -49,5 +49,18 @@ config ADF4371

> >

> >           To compile this driver as a module, choose M here: the

> >           module will be called adf4371.

> > +

> > +config ADRF6780

> > +        tristate "Analog Devices ADRF6780 Microwave Upconverter"

> > +        depends on SPI

> > +        depends on COMMON_CLK

> > +        depends on OF

> > +        help

> > +          Say yes here to build support for Analog Devices ADRF6780

> > +          5.9 GHz to 23.6 GHz, Wideband, Microwave Upconverter.

> > +

> > +          To compile this driver as a module, choose M here: the

> > +          module will be called adrf6780.

> > +

> >  endmenu

> >  endmenu

> > diff --git a/drivers/iio/frequency/Makefile

> b/drivers/iio/frequency/Makefile

> > index 518b1e50caef..ae3136c79202 100644

> > --- a/drivers/iio/frequency/Makefile

> > +++ b/drivers/iio/frequency/Makefile

> > @@ -7,3 +7,4 @@

> >  obj-$(CONFIG_AD9523) += ad9523.o

> >  obj-$(CONFIG_ADF4350) += adf4350.o

> >  obj-$(CONFIG_ADF4371) += adf4371.o

> > +obj-$(CONFIG_ADRF6780) += adrf6780.o

> > diff --git a/drivers/iio/frequency/adrf6780.c

> b/drivers/iio/frequency/adrf6780.c

> > new file mode 100644

> > index 000000000000..c492c4e4adf1

> > --- /dev/null

> > +++ b/drivers/iio/frequency/adrf6780.c

> > @@ -0,0 +1,534 @@

> > +// SPDX-License-Identifier: GPL-2.0+

> 

> about the licensing;

> 

> SPDX-License-Identifier: GPL-2.0+    ==   MODULE_LICENSE("GPL v2");

> SPDX-License-Identifier: GPL-2.0    ==   MODULE_LICENSE("GPL v2");

> 

> I usually don't care about this licensing details, but it seems to be

> important elsewhere.

> 

> > +/*

> > + * ADRF6780 driver

> 

> This could be   "Analog Devices ADRF6780 driver"

> 

> > + *

> > + * Copyright 2021 Analog Devices Inc.

> > + */

> > +

> > +#include <linux/bitfield.h>

> > +#include <linux/bits.h>

> > +#include <linux/clk.h>

> > +#include <linux/clkdev.h>

> > +#include <linux/clk-provider.h>

> > +#include <linux/delay.h>

> > +#include <linux/device.h>

> > +#include <linux/iio/iio.h>

> > +#include <linux/module.h>

> > +#include <linux/regmap.h>

> > +#include <linux/spi/spi.h>

> 

> Not all these headers look used.

> For one thing, regmap.h doesn't look used at all.

> Maybe trim the list.

> 

> > +

> > +/* ADRF6780 Register Map */

> > +#define ADRF6780_REG_CONTROL                   0x00

> > +#define ADRF6780_REG_ALARM_READBACK            0x01

> > +#define ADRF6780_REG_ALARM_MASKS               0x02

> > +#define ADRF6780_REG_ENABLE                    0x03

> > +#define ADRF6780_REG_LINEARIZE                 0x04

> > +#define ADRF6780_REG_LO_PATH                   0x05

> > +#define ADRF6780_REG_ADC_CONTROL               0x06

> > +#define ADRF6780_REG_ADC_OUTPUT                        0x0C

> > +

> > +/* ADRF6780_REG_CONTROL Map */

> > +#define ADRF6780_PARITY_EN_MSK                 BIT(15)

> > +#define ADRF6780_PARITY_EN(x)

> FIELD_PREP(ADRF6780_PARITY_EN_MSK, x)

> > +#define ADRF6780_SOFT_RESET_MSK                        BIT(14)

> > +#define ADRF6780_SOFT_RESET(x)

> FIELD_PREP(ADRF6780_SOFT_RESET_MSK, x)

> > +#define ADRF6780_CHIP_ID_MSK                   GENMASK(11, 4)

> > +#define ADRF6780_CHIP_ID                       0xA

> > +#define ADRF6780_CHIP_REVISION_MSK             GENMASK(3, 0)

> > +#define ADRF6780_CHIP_REVISION(x)

> FIELD_PREP(ADRF6780_CHIP_REVISION_MSK, x)

> > +

> > +/* ADRF6780_REG_ALARM_READBACK Map */

> > +#define ADRF6780_PARITY_ERROR_MSK              BIT(15)

> > +#define ADRF6780_PARITY_ERROR(x)

> FIELD_PREP(ADRF6780_PARITY_ERROR_MSK, x)

> > +#define ADRF6780_TOO_FEW_ERRORS_MSK            BIT(14)

> > +#define ADRF6780_TOO_FEW_ERRORS(x)

> FIELD_PREP(ADRF6780_TOO_FEW_ERRORS_MSK, x)

> > +#define ADRF6780_TOO_MANY_ERRORS_MSK           BIT(13)

> > +#define ADRF6780_TOO_MANY_ERRORS(x)

> FIELD_PREP(ADRF6780_TOO_MANY_ERRORS_MSK, x)

> > +#define ADRF6780_ADDRESS_RANGE_ERROR_MSK       BIT(12)

> > +#define ADRF6780_ADDRESS_RANGE_ERROR(x)

> FIELD_PREP(ADRF6780_ADDRESS_RANGE_ERROR_MSK, x)

> > +

> > +/* ADRF6780_REG_ENABLE Map */

> > +#define ADRF6780_VGA_BUFFER_EN_MSK             BIT(8)

> > +#define ADRF6780_VGA_BUFFER_EN(x)

> FIELD_PREP(ADRF6780_VGA_BUFFER_EN_MSK, x)

> > +#define ADRF6780_DETECTOR_EN_MSK               BIT(7)

> > +#define ADRF6780_DETECTOR_EN(x)

> FIELD_PREP(ADRF6780_DETECTOR_EN_MSK, x)

> > +#define ADRF6780_LO_BUFFER_EN_MSK              BIT(6)

> > +#define ADRF6780_LO_BUFFER_EN(x)

> FIELD_PREP(ADRF6780_LO_BUFFER_EN_MSK, x)

> > +#define ADRF6780_IF_MODE_EN_MSK                        BIT(5)

> > +#define ADRF6780_IF_MODE_EN(x)

> FIELD_PREP(ADRF6780_IF_MODE_EN_MSK, x)

> > +#define ADRF6780_IQ_MODE_EN_MSK                        BIT(4)

> > +#define ADRF6780_IQ_MODE_EN(x)

> FIELD_PREP(ADRF6780_IQ_MODE_EN_MSK, x)

> > +#define ADRF6780_LO_X2_EN_MSK                  BIT(3)

> > +#define ADRF6780_LO_X2_EN(x)

> FIELD_PREP(ADRF6780_LO_X2_EN_MSK, x)

> > +#define ADRF6780_LO_PPF_EN_MSK                 BIT(2)

> > +#define ADRF6780_LO_PPF_EN(x)

> FIELD_PREP(ADRF6780_LO_PPF_EN_MSK, x)

> > +#define ADRF6780_LO_EN_MSK                     BIT(1)

> > +#define ADRF6780_LO_EN(x)

> FIELD_PREP(ADRF6780_LO_EN_MSK, x)

> > +#define ADRF6780_UC_BIAS_EN_MSK                        BIT(0)

> > +#define ADRF6780_UC_BIAS_EN(x)

> FIELD_PREP(ADRF6780_UC_BIAS_EN_MSK, x)

> > +

> > +/* ADRF6780_REG_LINEARIZE Map */

> > +#define ADRF6780_RDAC_LINEARIZE_MSK            GENMASK(7, 0)

> > +#define ADRF6780_RDAC_LINEARIZE(x)

> FIELD_PREP(ADRF6780_RDAC_LINEARIZE_MSK, x)

> > +

> > +/* ADRF6780_REG_LO_PATH Map */

> > +#define ADRF6780_LO_SIDEBAND_MSK               BIT(10)

> > +#define ADRF6780_LO_SIDEBAND(x)

> FIELD_PREP(ADRF6780_LO_SIDEBAND_MSK, x)

> > +#define ADRF6780_Q_PATH_PHASE_ACCURACY_MSK

> GENMASK(7, 4)

> > +#define ADRF6780_Q_PATH_PHASE_ACCURACY(x)

> FIELD_PREP(ADRF6780_Q_PATH_PHASE_ACCURACY_MSK, x)

> > +#define ADRF6780_I_PATH_PHASE_ACCURACY_MSK

> GENMASK(3, 0)

> > +#define ADRF6780_I_PATH_PHASE_ACCURACY(x)

> FIELD_PREP(ADRF6780_I_PATH_PHASE_ACCURACY_MSK, x)

> > +

> > +/* ADRF6780_REG_ADC_CONTROL Map */

> > +#define ADRF6780_VDET_OUTPUT_SELECT_MSK                BIT(3)

> > +#define ADRF6780_VDET_OUTPUT_SELECT(x)

> FIELD_PREP(ADRF6780_VDET_OUTPUT_SELECT_MSK, x)

> > +#define ADRF6780_ADC_START_MSK                 BIT(2)

> > +#define ADRF6780_ADC_START(x)

> FIELD_PREP(ADRF6780_ADC_START_MSK, x)

> > +#define ADRF6780_ADC_EN_MSK                    BIT(1)

> > +#define ADRF6780_ADC_EN(x)

> FIELD_PREP(ADRF6780_ADC_EN_MSK, x)

> > +#define ADRF6780_ADC_CLOCK_EN_MSK              BIT(0)

> > +#define ADRF6780_ADC_CLOCK_EN(x)

> FIELD_PREP(ADRF6780_ADC_CLOCK_EN_MSK, x)

> > +

> > +/* ADRF6780_REG_ADC_OUTPUT Map */

> > +#define ADRF6780_ADC_STATUS_MSK                        BIT(8)

> > +#define ADRF6780_ADC_STATUS(x)

> FIELD_PREP(ADRF6780_ADC_STATUS_MSK, x)

> > +#define ADRF6780_ADC_VALUE_MSK                 GENMASK(7, 0)

> > +#define ADRF6780_ADC_VALUE(x)

> FIELD_PREP(ADRF6780_ADC_VALUE_MSK, x)

> 

> The indentation for the bit-values doesn't look consistent in all places.

> 

> > +

> > +enum supported_parts {

> > +       ADRF6780,

> > +};

> 

> This enum doesn't seem used anywhere

> 

> > +

> > +struct adrf6780_dev {

> > +       struct spi_device       *spi;

> > +       struct clk              *clkin;

> > +       /* Protect against concurrent accesses to the device */

> > +       struct mutex            lock;

> > +       bool                    parity_en;

> 

> Maybe remove this parity check.

> There are many drivers that support some form of simple error

> checking, but in the kernel this is typically left up to the SPI

> framework.

> So, I'd just disable the error checking entirely.


I would just argue here... Though parity check is not the most reliable one
out there, it does give some extra checking on top of what the SPI framework
can give (AFAICT). As this part might be used is some  sensitive applications, I
can imagine someone wanting this extra feature that does not really cost that
much (if something). However it looks like that on the write side, the only way
to know about parity issues (or other errors) is to make use of ALM pin.

Anyways, I do agree that having this as a devicetree parameter is, at least, arguable
(I don't think it is terribly wrong though). But I guess that, at least, as a module
parameter would be something more acceptable.
 
Or, as you suggested, It can also be removed and only implemented if someone
really cares/asks for it...

- Nuno Sá
Nuno Sa July 2, 2021, 7:09 a.m. UTC | #3
> From: Sa, Nuno <Nuno.Sa@analog.com>

> Sent: Wednesday, June 30, 2021 2:04 PM

> To: Alexandru Ardelean <ardeleanalex@gmail.com>; Miclaus, Antoniu

> <Antoniu.Miclaus@analog.com>

> Cc: linux-iio <linux-iio@vger.kernel.org>; LKML <linux-

> kernel@vger.kernel.org>; Jonathan Cameron <jic23@kernel.org>;

> devicetree <devicetree@vger.kernel.org>; Rob Herring

> <robh+dt@kernel.org>

> Subject: RE: [PATCH 1/2] iio: frequency: adrf6780: add support for

> ADRF6780

> 

> [External]

> 

> Hey Alex,

> 

> Thanks for the review,

> 

> > From: Alexandru Ardelean <ardeleanalex@gmail.com>

> > Sent: Wednesday, June 30, 2021 10:38 AM

> > To: Miclaus, Antoniu <Antoniu.Miclaus@analog.com>

> > Cc: linux-iio <linux-iio@vger.kernel.org>; LKML <linux-

> > kernel@vger.kernel.org>; Jonathan Cameron <jic23@kernel.org>;

> > devicetree <devicetree@vger.kernel.org>; Rob Herring

> > <robh+dt@kernel.org>

> > Subject: Re: [PATCH 1/2] iio: frequency: adrf6780: add support for

> > ADRF6780

> >

> > On Tue, Jun 29, 2021 at 5:25 PM Antoniu Miclaus

> > <antoniu.miclaus@analog.com> wrote:

> > >

> > > Add support for the ADRF6780 microwave upconverter.

> >

> > Hey,

> >

> > A few comments inline.

> > The description of the commit could have a bit more information.

> > Maybe a short description of the chip (typically I'd adapt something

> > from the datasheet).

> > And maybe a link to the datasheet.

> >

> > >

> > > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>

> > > ---

> > >  drivers/iio/frequency/Kconfig    |  13 +

> > >  drivers/iio/frequency/Makefile   |   1 +

> > >  drivers/iio/frequency/adrf6780.c | 534

> > +++++++++++++++++++++++++++++++

> > >  3 files changed, 548 insertions(+)

> > >  create mode 100644 drivers/iio/frequency/adrf6780.c

> > >

> > > diff --git a/drivers/iio/frequency/Kconfig

> > b/drivers/iio/frequency/Kconfig

> > > index 240b81502512..fc9751c48f59 100644

> > > --- a/drivers/iio/frequency/Kconfig

> > > +++ b/drivers/iio/frequency/Kconfig

> > > @@ -49,5 +49,18 @@ config ADF4371

> > >

> > >           To compile this driver as a module, choose M here: the

> > >           module will be called adf4371.

> > > +

> > > +config ADRF6780

> > > +        tristate "Analog Devices ADRF6780 Microwave Upconverter"

> > > +        depends on SPI

> > > +        depends on COMMON_CLK

> > > +        depends on OF

> > > +        help

> > > +          Say yes here to build support for Analog Devices ADRF6780

> > > +          5.9 GHz to 23.6 GHz, Wideband, Microwave Upconverter.

> > > +

> > > +          To compile this driver as a module, choose M here: the

> > > +          module will be called adrf6780.

> > > +

> > >  endmenu

> > >  endmenu

> > > diff --git a/drivers/iio/frequency/Makefile

> > b/drivers/iio/frequency/Makefile

> > > index 518b1e50caef..ae3136c79202 100644

> > > --- a/drivers/iio/frequency/Makefile

> > > +++ b/drivers/iio/frequency/Makefile

> > > @@ -7,3 +7,4 @@

> > >  obj-$(CONFIG_AD9523) += ad9523.o

> > >  obj-$(CONFIG_ADF4350) += adf4350.o

> > >  obj-$(CONFIG_ADF4371) += adf4371.o

> > > +obj-$(CONFIG_ADRF6780) += adrf6780.o

> > > diff --git a/drivers/iio/frequency/adrf6780.c

> > b/drivers/iio/frequency/adrf6780.c

> > > new file mode 100644

> > > index 000000000000..c492c4e4adf1

> > > --- /dev/null

> > > +++ b/drivers/iio/frequency/adrf6780.c

> > > @@ -0,0 +1,534 @@

> > > +// SPDX-License-Identifier: GPL-2.0+

> >

> > about the licensing;

> >

> > SPDX-License-Identifier: GPL-2.0+    ==   MODULE_LICENSE("GPL

> v2");

> > SPDX-License-Identifier: GPL-2.0    ==   MODULE_LICENSE("GPL v2");

> >

> > I usually don't care about this licensing details, but it seems to be

> > important elsewhere.

> >

> > > +/*

> > > + * ADRF6780 driver

> >

> > This could be   "Analog Devices ADRF6780 driver"

> >

> > > + *

> > > + * Copyright 2021 Analog Devices Inc.

> > > + */

> > > +

> > > +#include <linux/bitfield.h>

> > > +#include <linux/bits.h>

> > > +#include <linux/clk.h>

> > > +#include <linux/clkdev.h>

> > > +#include <linux/clk-provider.h>

> > > +#include <linux/delay.h>

> > > +#include <linux/device.h>

> > > +#include <linux/iio/iio.h>

> > > +#include <linux/module.h>

> > > +#include <linux/regmap.h>

> > > +#include <linux/spi/spi.h>

> >

> > Not all these headers look used.

> > For one thing, regmap.h doesn't look used at all.

> > Maybe trim the list.

> >

> > > +

> > > +/* ADRF6780 Register Map */

> > > +#define ADRF6780_REG_CONTROL                   0x00

> > > +#define ADRF6780_REG_ALARM_READBACK            0x01

> > > +#define ADRF6780_REG_ALARM_MASKS               0x02

> > > +#define ADRF6780_REG_ENABLE                    0x03

> > > +#define ADRF6780_REG_LINEARIZE                 0x04

> > > +#define ADRF6780_REG_LO_PATH                   0x05

> > > +#define ADRF6780_REG_ADC_CONTROL               0x06

> > > +#define ADRF6780_REG_ADC_OUTPUT                        0x0C

> > > +

> > > +/* ADRF6780_REG_CONTROL Map */

> > > +#define ADRF6780_PARITY_EN_MSK                 BIT(15)

> > > +#define ADRF6780_PARITY_EN(x)

> > FIELD_PREP(ADRF6780_PARITY_EN_MSK, x)

> > > +#define ADRF6780_SOFT_RESET_MSK                        BIT(14)

> > > +#define ADRF6780_SOFT_RESET(x)

> > FIELD_PREP(ADRF6780_SOFT_RESET_MSK, x)

> > > +#define ADRF6780_CHIP_ID_MSK                   GENMASK(11, 4)

> > > +#define ADRF6780_CHIP_ID                       0xA

> > > +#define ADRF6780_CHIP_REVISION_MSK             GENMASK(3, 0)

> > > +#define ADRF6780_CHIP_REVISION(x)

> > FIELD_PREP(ADRF6780_CHIP_REVISION_MSK, x)

> > > +

> > > +/* ADRF6780_REG_ALARM_READBACK Map */

> > > +#define ADRF6780_PARITY_ERROR_MSK              BIT(15)

> > > +#define ADRF6780_PARITY_ERROR(x)

> > FIELD_PREP(ADRF6780_PARITY_ERROR_MSK, x)

> > > +#define ADRF6780_TOO_FEW_ERRORS_MSK            BIT(14)

> > > +#define ADRF6780_TOO_FEW_ERRORS(x)

> > FIELD_PREP(ADRF6780_TOO_FEW_ERRORS_MSK, x)

> > > +#define ADRF6780_TOO_MANY_ERRORS_MSK           BIT(13)

> > > +#define ADRF6780_TOO_MANY_ERRORS(x)

> > FIELD_PREP(ADRF6780_TOO_MANY_ERRORS_MSK, x)

> > > +#define ADRF6780_ADDRESS_RANGE_ERROR_MSK       BIT(12)

> > > +#define ADRF6780_ADDRESS_RANGE_ERROR(x)

> > FIELD_PREP(ADRF6780_ADDRESS_RANGE_ERROR_MSK, x)

> > > +

> > > +/* ADRF6780_REG_ENABLE Map */

> > > +#define ADRF6780_VGA_BUFFER_EN_MSK             BIT(8)

> > > +#define ADRF6780_VGA_BUFFER_EN(x)

> > FIELD_PREP(ADRF6780_VGA_BUFFER_EN_MSK, x)

> > > +#define ADRF6780_DETECTOR_EN_MSK               BIT(7)

> > > +#define ADRF6780_DETECTOR_EN(x)

> > FIELD_PREP(ADRF6780_DETECTOR_EN_MSK, x)

> > > +#define ADRF6780_LO_BUFFER_EN_MSK              BIT(6)

> > > +#define ADRF6780_LO_BUFFER_EN(x)

> > FIELD_PREP(ADRF6780_LO_BUFFER_EN_MSK, x)

> > > +#define ADRF6780_IF_MODE_EN_MSK                        BIT(5)

> > > +#define ADRF6780_IF_MODE_EN(x)

> > FIELD_PREP(ADRF6780_IF_MODE_EN_MSK, x)

> > > +#define ADRF6780_IQ_MODE_EN_MSK                        BIT(4)

> > > +#define ADRF6780_IQ_MODE_EN(x)

> > FIELD_PREP(ADRF6780_IQ_MODE_EN_MSK, x)

> > > +#define ADRF6780_LO_X2_EN_MSK                  BIT(3)

> > > +#define ADRF6780_LO_X2_EN(x)

> > FIELD_PREP(ADRF6780_LO_X2_EN_MSK, x)

> > > +#define ADRF6780_LO_PPF_EN_MSK                 BIT(2)

> > > +#define ADRF6780_LO_PPF_EN(x)

> > FIELD_PREP(ADRF6780_LO_PPF_EN_MSK, x)

> > > +#define ADRF6780_LO_EN_MSK                     BIT(1)

> > > +#define ADRF6780_LO_EN(x)

> > FIELD_PREP(ADRF6780_LO_EN_MSK, x)

> > > +#define ADRF6780_UC_BIAS_EN_MSK                        BIT(0)

> > > +#define ADRF6780_UC_BIAS_EN(x)

> > FIELD_PREP(ADRF6780_UC_BIAS_EN_MSK, x)

> > > +

> > > +/* ADRF6780_REG_LINEARIZE Map */

> > > +#define ADRF6780_RDAC_LINEARIZE_MSK            GENMASK(7, 0)

> > > +#define ADRF6780_RDAC_LINEARIZE(x)

> > FIELD_PREP(ADRF6780_RDAC_LINEARIZE_MSK, x)

> > > +

> > > +/* ADRF6780_REG_LO_PATH Map */

> > > +#define ADRF6780_LO_SIDEBAND_MSK               BIT(10)

> > > +#define ADRF6780_LO_SIDEBAND(x)

> > FIELD_PREP(ADRF6780_LO_SIDEBAND_MSK, x)

> > > +#define ADRF6780_Q_PATH_PHASE_ACCURACY_MSK

> > GENMASK(7, 4)

> > > +#define ADRF6780_Q_PATH_PHASE_ACCURACY(x)

> > FIELD_PREP(ADRF6780_Q_PATH_PHASE_ACCURACY_MSK, x)

> > > +#define ADRF6780_I_PATH_PHASE_ACCURACY_MSK

> > GENMASK(3, 0)

> > > +#define ADRF6780_I_PATH_PHASE_ACCURACY(x)

> > FIELD_PREP(ADRF6780_I_PATH_PHASE_ACCURACY_MSK, x)

> > > +

> > > +/* ADRF6780_REG_ADC_CONTROL Map */

> > > +#define ADRF6780_VDET_OUTPUT_SELECT_MSK                BIT(3)

> > > +#define ADRF6780_VDET_OUTPUT_SELECT(x)

> > FIELD_PREP(ADRF6780_VDET_OUTPUT_SELECT_MSK, x)

> > > +#define ADRF6780_ADC_START_MSK                 BIT(2)

> > > +#define ADRF6780_ADC_START(x)

> > FIELD_PREP(ADRF6780_ADC_START_MSK, x)

> > > +#define ADRF6780_ADC_EN_MSK                    BIT(1)

> > > +#define ADRF6780_ADC_EN(x)

> > FIELD_PREP(ADRF6780_ADC_EN_MSK, x)

> > > +#define ADRF6780_ADC_CLOCK_EN_MSK              BIT(0)

> > > +#define ADRF6780_ADC_CLOCK_EN(x)

> > FIELD_PREP(ADRF6780_ADC_CLOCK_EN_MSK, x)

> > > +

> > > +/* ADRF6780_REG_ADC_OUTPUT Map */

> > > +#define ADRF6780_ADC_STATUS_MSK                        BIT(8)

> > > +#define ADRF6780_ADC_STATUS(x)

> > FIELD_PREP(ADRF6780_ADC_STATUS_MSK, x)

> > > +#define ADRF6780_ADC_VALUE_MSK                 GENMASK(7, 0)

> > > +#define ADRF6780_ADC_VALUE(x)

> > FIELD_PREP(ADRF6780_ADC_VALUE_MSK, x)

> >

> > The indentation for the bit-values doesn't look consistent in all

> places.

> >

> > > +

> > > +enum supported_parts {

> > > +       ADRF6780,

> > > +};

> >

> > This enum doesn't seem used anywhere

> >

> > > +

> > > +struct adrf6780_dev {

> > > +       struct spi_device       *spi;

> > > +       struct clk              *clkin;

> > > +       /* Protect against concurrent accesses to the device */

> > > +       struct mutex            lock;

> > > +       bool                    parity_en;

> >

> > Maybe remove this parity check.

> > There are many drivers that support some form of simple error

> > checking, but in the kernel this is typically left up to the SPI

> > framework.

> > So, I'd just disable the error checking entirely.

> 

> I would just argue here... Though parity check is not the most reliable

> one

> out there, it does give some extra checking on top of what the SPI

> framework

> can give (AFAICT). As this part might be used is some  sensitive

> applications, I

> can imagine someone wanting this extra feature that does not really

> cost that

> much (if something). However it looks like that on the write side, the

> only way

> to know about parity issues (or other errors) is to make use of ALM

> pin.

> 

> Anyways, I do agree that having this as a devicetree parameter is, at

> least, arguable

> (I don't think it is terribly wrong though). But I guess that, at least, as a

> module

> parameter would be something more acceptable.


Nice that we did not went (removed in v2) with the module parameter. Just
found out yesterday [1] that they really not much appreciated in device drivers
(which actually makes sense).

[1]: https://lore.kernel.org/lkml/YN2MtVFOC+yd%2FrRZ@kroah.com/

- Nuno Sá
Jonathan Cameron July 3, 2021, 4:18 p.m. UTC | #4
On Wed, 30 Jun 2021 12:04:16 +0000
"Sa, Nuno" <Nuno.Sa@analog.com> wrote:

> Hey Alex,

> 

> Thanks for the review,

> 

> > From: Alexandru Ardelean <ardeleanalex@gmail.com>

> > Sent: Wednesday, June 30, 2021 10:38 AM

> > To: Miclaus, Antoniu <Antoniu.Miclaus@analog.com>

> > Cc: linux-iio <linux-iio@vger.kernel.org>; LKML <linux-  

> > kernel@vger.kernel.org>; Jonathan Cameron <jic23@kernel.org>;  

> > devicetree <devicetree@vger.kernel.org>; Rob Herring

> > <robh+dt@kernel.org>

> > Subject: Re: [PATCH 1/2] iio: frequency: adrf6780: add support for

> > ADRF6780

> > 

> > On Tue, Jun 29, 2021 at 5:25 PM Antoniu Miclaus

> > <antoniu.miclaus@analog.com> wrote:  

> > >

> > > Add support for the ADRF6780 microwave upconverter.  

> > 

> > Hey,

> > 

> > A few comments inline.

> > The description of the commit could have a bit more information.

> > Maybe a short description of the chip (typically I'd adapt something

> > from the datasheet).

> > And maybe a link to the datasheet.

> >   

> > >

> > > Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>

> > > ---

> > >  drivers/iio/frequency/Kconfig    |  13 +

> > >  drivers/iio/frequency/Makefile   |   1 +

> > >  drivers/iio/frequency/adrf6780.c | 534  

> > +++++++++++++++++++++++++++++++  

> > >  3 files changed, 548 insertions(+)

> > >  create mode 100644 drivers/iio/frequency/adrf6780.c

> > >

> > > diff --git a/drivers/iio/frequency/Kconfig  

> > b/drivers/iio/frequency/Kconfig  

> > > index 240b81502512..fc9751c48f59 100644

> > > --- a/drivers/iio/frequency/Kconfig

> > > +++ b/drivers/iio/frequency/Kconfig

> > > @@ -49,5 +49,18 @@ config ADF4371

> > >

> > >           To compile this driver as a module, choose M here: the

> > >           module will be called adf4371.

> > > +

> > > +config ADRF6780

> > > +        tristate "Analog Devices ADRF6780 Microwave Upconverter"

> > > +        depends on SPI

> > > +        depends on COMMON_CLK

> > > +        depends on OF

> > > +        help

> > > +          Say yes here to build support for Analog Devices ADRF6780

> > > +          5.9 GHz to 23.6 GHz, Wideband, Microwave Upconverter.

> > > +

> > > +          To compile this driver as a module, choose M here: the

> > > +          module will be called adrf6780.

> > > +

> > >  endmenu

> > >  endmenu

> > > diff --git a/drivers/iio/frequency/Makefile  

> > b/drivers/iio/frequency/Makefile  

> > > index 518b1e50caef..ae3136c79202 100644

> > > --- a/drivers/iio/frequency/Makefile

> > > +++ b/drivers/iio/frequency/Makefile

> > > @@ -7,3 +7,4 @@

> > >  obj-$(CONFIG_AD9523) += ad9523.o

> > >  obj-$(CONFIG_ADF4350) += adf4350.o

> > >  obj-$(CONFIG_ADF4371) += adf4371.o

> > > +obj-$(CONFIG_ADRF6780) += adrf6780.o

> > > diff --git a/drivers/iio/frequency/adrf6780.c  

> > b/drivers/iio/frequency/adrf6780.c  

> > > new file mode 100644

> > > index 000000000000..c492c4e4adf1

> > > --- /dev/null

> > > +++ b/drivers/iio/frequency/adrf6780.c

> > > @@ -0,0 +1,534 @@

> > > +// SPDX-License-Identifier: GPL-2.0+  

> > 

> > about the licensing;

> > 

> > SPDX-License-Identifier: GPL-2.0+    ==   MODULE_LICENSE("GPL v2");

> > SPDX-License-Identifier: GPL-2.0    ==   MODULE_LICENSE("GPL v2");

> > 

> > I usually don't care about this licensing details, but it seems to be

> > important elsewhere.

> >   

> > > +/*

> > > + * ADRF6780 driver  

> > 

> > This could be   "Analog Devices ADRF6780 driver"

> >   

> > > + *

> > > + * Copyright 2021 Analog Devices Inc.

> > > + */

> > > +

> > > +#include <linux/bitfield.h>

> > > +#include <linux/bits.h>

> > > +#include <linux/clk.h>

> > > +#include <linux/clkdev.h>

> > > +#include <linux/clk-provider.h>

> > > +#include <linux/delay.h>

> > > +#include <linux/device.h>

> > > +#include <linux/iio/iio.h>

> > > +#include <linux/module.h>

> > > +#include <linux/regmap.h>

> > > +#include <linux/spi/spi.h>  

> > 

> > Not all these headers look used.

> > For one thing, regmap.h doesn't look used at all.

> > Maybe trim the list.

> >   

> > > +

> > > +/* ADRF6780 Register Map */

> > > +#define ADRF6780_REG_CONTROL                   0x00

> > > +#define ADRF6780_REG_ALARM_READBACK            0x01

> > > +#define ADRF6780_REG_ALARM_MASKS               0x02

> > > +#define ADRF6780_REG_ENABLE                    0x03

> > > +#define ADRF6780_REG_LINEARIZE                 0x04

> > > +#define ADRF6780_REG_LO_PATH                   0x05

> > > +#define ADRF6780_REG_ADC_CONTROL               0x06

> > > +#define ADRF6780_REG_ADC_OUTPUT                        0x0C

> > > +

> > > +/* ADRF6780_REG_CONTROL Map */

> > > +#define ADRF6780_PARITY_EN_MSK                 BIT(15)

> > > +#define ADRF6780_PARITY_EN(x)  

> > FIELD_PREP(ADRF6780_PARITY_EN_MSK, x)  

> > > +#define ADRF6780_SOFT_RESET_MSK                        BIT(14)

> > > +#define ADRF6780_SOFT_RESET(x)  

> > FIELD_PREP(ADRF6780_SOFT_RESET_MSK, x)  

> > > +#define ADRF6780_CHIP_ID_MSK                   GENMASK(11, 4)

> > > +#define ADRF6780_CHIP_ID                       0xA

> > > +#define ADRF6780_CHIP_REVISION_MSK             GENMASK(3, 0)

> > > +#define ADRF6780_CHIP_REVISION(x)  

> > FIELD_PREP(ADRF6780_CHIP_REVISION_MSK, x)  

> > > +

> > > +/* ADRF6780_REG_ALARM_READBACK Map */

> > > +#define ADRF6780_PARITY_ERROR_MSK              BIT(15)

> > > +#define ADRF6780_PARITY_ERROR(x)  

> > FIELD_PREP(ADRF6780_PARITY_ERROR_MSK, x)  

> > > +#define ADRF6780_TOO_FEW_ERRORS_MSK            BIT(14)

> > > +#define ADRF6780_TOO_FEW_ERRORS(x)  

> > FIELD_PREP(ADRF6780_TOO_FEW_ERRORS_MSK, x)  

> > > +#define ADRF6780_TOO_MANY_ERRORS_MSK           BIT(13)

> > > +#define ADRF6780_TOO_MANY_ERRORS(x)  

> > FIELD_PREP(ADRF6780_TOO_MANY_ERRORS_MSK, x)  

> > > +#define ADRF6780_ADDRESS_RANGE_ERROR_MSK       BIT(12)

> > > +#define ADRF6780_ADDRESS_RANGE_ERROR(x)  

> > FIELD_PREP(ADRF6780_ADDRESS_RANGE_ERROR_MSK, x)  

> > > +

> > > +/* ADRF6780_REG_ENABLE Map */

> > > +#define ADRF6780_VGA_BUFFER_EN_MSK             BIT(8)

> > > +#define ADRF6780_VGA_BUFFER_EN(x)  

> > FIELD_PREP(ADRF6780_VGA_BUFFER_EN_MSK, x)  

> > > +#define ADRF6780_DETECTOR_EN_MSK               BIT(7)

> > > +#define ADRF6780_DETECTOR_EN(x)  

> > FIELD_PREP(ADRF6780_DETECTOR_EN_MSK, x)  

> > > +#define ADRF6780_LO_BUFFER_EN_MSK              BIT(6)

> > > +#define ADRF6780_LO_BUFFER_EN(x)  

> > FIELD_PREP(ADRF6780_LO_BUFFER_EN_MSK, x)  

> > > +#define ADRF6780_IF_MODE_EN_MSK                        BIT(5)

> > > +#define ADRF6780_IF_MODE_EN(x)  

> > FIELD_PREP(ADRF6780_IF_MODE_EN_MSK, x)  

> > > +#define ADRF6780_IQ_MODE_EN_MSK                        BIT(4)

> > > +#define ADRF6780_IQ_MODE_EN(x)  

> > FIELD_PREP(ADRF6780_IQ_MODE_EN_MSK, x)  

> > > +#define ADRF6780_LO_X2_EN_MSK                  BIT(3)

> > > +#define ADRF6780_LO_X2_EN(x)  

> > FIELD_PREP(ADRF6780_LO_X2_EN_MSK, x)  

> > > +#define ADRF6780_LO_PPF_EN_MSK                 BIT(2)

> > > +#define ADRF6780_LO_PPF_EN(x)  

> > FIELD_PREP(ADRF6780_LO_PPF_EN_MSK, x)  

> > > +#define ADRF6780_LO_EN_MSK                     BIT(1)

> > > +#define ADRF6780_LO_EN(x)  

> > FIELD_PREP(ADRF6780_LO_EN_MSK, x)  

> > > +#define ADRF6780_UC_BIAS_EN_MSK                        BIT(0)

> > > +#define ADRF6780_UC_BIAS_EN(x)  

> > FIELD_PREP(ADRF6780_UC_BIAS_EN_MSK, x)  

> > > +

> > > +/* ADRF6780_REG_LINEARIZE Map */

> > > +#define ADRF6780_RDAC_LINEARIZE_MSK            GENMASK(7, 0)

> > > +#define ADRF6780_RDAC_LINEARIZE(x)  

> > FIELD_PREP(ADRF6780_RDAC_LINEARIZE_MSK, x)  

> > > +

> > > +/* ADRF6780_REG_LO_PATH Map */

> > > +#define ADRF6780_LO_SIDEBAND_MSK               BIT(10)

> > > +#define ADRF6780_LO_SIDEBAND(x)  

> > FIELD_PREP(ADRF6780_LO_SIDEBAND_MSK, x)  

> > > +#define ADRF6780_Q_PATH_PHASE_ACCURACY_MSK  

> > GENMASK(7, 4)  

> > > +#define ADRF6780_Q_PATH_PHASE_ACCURACY(x)  

> > FIELD_PREP(ADRF6780_Q_PATH_PHASE_ACCURACY_MSK, x)  

> > > +#define ADRF6780_I_PATH_PHASE_ACCURACY_MSK  

> > GENMASK(3, 0)  

> > > +#define ADRF6780_I_PATH_PHASE_ACCURACY(x)  

> > FIELD_PREP(ADRF6780_I_PATH_PHASE_ACCURACY_MSK, x)  

> > > +

> > > +/* ADRF6780_REG_ADC_CONTROL Map */

> > > +#define ADRF6780_VDET_OUTPUT_SELECT_MSK                BIT(3)

> > > +#define ADRF6780_VDET_OUTPUT_SELECT(x)  

> > FIELD_PREP(ADRF6780_VDET_OUTPUT_SELECT_MSK, x)  

> > > +#define ADRF6780_ADC_START_MSK                 BIT(2)

> > > +#define ADRF6780_ADC_START(x)  

> > FIELD_PREP(ADRF6780_ADC_START_MSK, x)  

> > > +#define ADRF6780_ADC_EN_MSK                    BIT(1)

> > > +#define ADRF6780_ADC_EN(x)  

> > FIELD_PREP(ADRF6780_ADC_EN_MSK, x)  

> > > +#define ADRF6780_ADC_CLOCK_EN_MSK              BIT(0)

> > > +#define ADRF6780_ADC_CLOCK_EN(x)  

> > FIELD_PREP(ADRF6780_ADC_CLOCK_EN_MSK, x)  

> > > +

> > > +/* ADRF6780_REG_ADC_OUTPUT Map */

> > > +#define ADRF6780_ADC_STATUS_MSK                        BIT(8)

> > > +#define ADRF6780_ADC_STATUS(x)  

> > FIELD_PREP(ADRF6780_ADC_STATUS_MSK, x)  

> > > +#define ADRF6780_ADC_VALUE_MSK                 GENMASK(7, 0)

> > > +#define ADRF6780_ADC_VALUE(x)  

> > FIELD_PREP(ADRF6780_ADC_VALUE_MSK, x)

> > 

> > The indentation for the bit-values doesn't look consistent in all places.

> >   

> > > +

> > > +enum supported_parts {

> > > +       ADRF6780,

> > > +};  

> > 

> > This enum doesn't seem used anywhere

> >   

> > > +

> > > +struct adrf6780_dev {

> > > +       struct spi_device       *spi;

> > > +       struct clk              *clkin;

> > > +       /* Protect against concurrent accesses to the device */

> > > +       struct mutex            lock;

> > > +       bool                    parity_en;  

> > 

> > Maybe remove this parity check.

> > There are many drivers that support some form of simple error

> > checking, but in the kernel this is typically left up to the SPI

> > framework.

> > So, I'd just disable the error checking entirely.  

> 

> I would just argue here... Though parity check is not the most reliable one

> out there, it does give some extra checking on top of what the SPI framework

> can give (AFAICT). As this part might be used is some  sensitive applications, I

> can imagine someone wanting this extra feature that does not really cost that

> much (if something). However it looks like that on the write side, the only way

> to know about parity issues (or other errors) is to make use of ALM pin.


If there is hardware parity support and we can safely use it (ie. the ALM pin
is connected) then I would support it as always on.

Note I haven't looked at the code yet, so this is just a general principle.

Not something for a module parameter though.  If it's really costly for some reason
we might provide a runtime control to disable it.

> 

> Anyways, I do agree that having this as a devicetree parameter is, at least, arguable

> (I don't think it is terribly wrong though). But I guess that, at least, as a module

> parameter would be something more acceptable.

>  

> Or, as you suggested, It can also be removed and only implemented if someone

> really cares/asks for it...

> 

> - Nuno Sá