| Message ID | 20210723132810.25728-1-alexandre.torgue@foss.st.com |
|---|---|
| Headers | show |
| Series | Add STM32MP13 SoCs and discovery board support | expand |
On 7/23/21 3:46 PM, Arnd Bergmann wrote: > On Fri, Jul 23, 2021 at 3:28 PM Alexandre Torgue > <alexandre.torgue@foss.st.com> wrote: >> >> This series enhance the STM32 MPU family by adding STM32MP13 SoCs support. >> It adds machine support and device tree diversity to support the whole >> stm32mp13 family (STM32MP131/STM32MP133/STM32MP135, plus security feature >> diversity). >> >> Basically STM32MP13 SoCs embeds one Cortex A7, storage (SD/MMC/SDIO, QSPI FMC), >> network (ETH, CAN), display (DCMIPP, LTDC, ...), audio(SAI, DFSDM, SPDIFRX), >> com (USB EHCI/OHCI, USB OTG, I2C, SPI/I2S, U(S)ART). >> >> This series also adds STM32MP135F Discovery board support (stm32mp135f-dk). It >> embeds a STM32MP135f SOC with 512 MB of DDR3. Several connections are available >> on this board: >> - 4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ... >> >> Only SD card, uart4 (console) and watchdog IPs are enabled in this commit. >> >> Note that file stm32mp135.dtsi doesn't define nodes but I add it now to ease adding >> of new nodes in a (close) future. > > I had a brief look and it seems all fine to me, nice work! > > The only (very minor) thing I noticed is that the crypto engine device node > has an unusual name 'cryp@' instead of the usual 'crypto@', but this is already > the case on stm32mp157. > > With this changed, > > Acked-by: Arnd Bergmann <arnd@arndb.de > Thanks Arnd. I'll change "cryp: cryp@" by "cryp: crypto@" (either in V2 or directly during the merge). regards Alex
On 7/23/21 3:28 PM, Alexandre Torgue wrote: > This series enhance the STM32 MPU family by adding STM32MP13 SoCs support. > It adds machine support and device tree diversity to support the whole > stm32mp13 family (STM32MP131/STM32MP133/STM32MP135, plus security feature > diversity). > > Basically STM32MP13 SoCs embeds one Cortex A7, storage (SD/MMC/SDIO, QSPI FMC), > network (ETH, CAN), display (DCMIPP, LTDC, ...), audio(SAI, DFSDM, SPDIFRX), > com (USB EHCI/OHCI, USB OTG, I2C, SPI/I2S, U(S)ART). > > This series also adds STM32MP135F Discovery board support (stm32mp135f-dk). It > embeds a STM32MP135f SOC with 512 MB of DDR3. Several connections are available > on this board: > - 4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ... > > Only SD card, uart4 (console) and watchdog IPs are enabled in this commit. > > Note that file stm32mp135.dtsi doesn't define nodes but I add it now to ease adding > of new nodes in a (close) future. > > regards > Alex > > Alexandre Torgue (7): > dt-bindings: pinctrl: stm32: add new compatible for STM32MP135 SoC > pinctrl: stm32: Add STM32MP135 SoC support > docs: arm: stm32: introduce STM32MP13 SoCs > ARM: stm32: add initial support for STM32MP13 family > ARM: dts: stm32: add STM32MP13 SoCs support > dt-bindings: stm32: document stm32mp135f-dk board > ARM: dts: stm32: add initial support of stm32mp135f-dk board > > Documentation/arm/index.rst | 1 + > .../arm/stm32/stm32mp13-overview.rst | 37 + > .../devicetree/bindings/arm/stm32/stm32.yaml | 4 + > .../bindings/pinctrl/st,stm32-pinctrl.yaml | 1 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 64 + > arch/arm/boot/dts/stm32mp131.dtsi | 283 +++ > arch/arm/boot/dts/stm32mp133.dtsi | 37 + > arch/arm/boot/dts/stm32mp135.dtsi | 12 + > arch/arm/boot/dts/stm32mp135f-dk.dts | 56 + > arch/arm/boot/dts/stm32mp13xc.dtsi | 17 + > arch/arm/boot/dts/stm32mp13xf.dtsi | 17 + > arch/arm/mach-stm32/Kconfig | 8 + > arch/arm/mach-stm32/board-dt.c | 3 + > drivers/pinctrl/stm32/Kconfig | 6 + > drivers/pinctrl/stm32/Makefile | 1 + > drivers/pinctrl/stm32/pinctrl-stm32mp135.c | 1679 +++++++++++++++++ > 17 files changed, 2227 insertions(+) > create mode 100644 Documentation/arm/stm32/stm32mp13-overview.rst > create mode 100644 arch/arm/boot/dts/stm32mp13-pinctrl.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp131.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp133.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp135.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp135f-dk.dts > create mode 100644 arch/arm/boot/dts/stm32mp13xc.dtsi > create mode 100644 arch/arm/boot/dts/stm32mp13xf.dtsi > create mode 100644 drivers/pinctrl/stm32/pinctrl-stm32mp135.c > With minor changes (cryp@ to crypto@), patches 3 to 7 applied on stm32-next. Regards Alex