| Message ID | 20220903174150.3566935-1-iskren.chernev@gmail.com |
|---|---|
| Headers | show |
| Series | Add support for sm6115,4250 and OnePlus Nord N100 | expand |
On 3.09.2022 19:41, Iskren Chernev wrote: > Add support for Qualcomm SM6115 SoC. This includes: > - GCC > - Pinctrl > - RPM (CC+PD) > - USB > - MMC > - UFS > > Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> > --- > Remaining issues from make dtbs_check: > - qcom,glink-rpm -- this is still in a txt file > - rpm-requests: qcom,glink-channels -- according to txt file, it is allowed > property > - pinctrl -- the existing bindings should support both simple (single pin) > and multi-block pinctr blocks (this commit contains multi-block only). > However it doesn't work. This block needs to be revisited: > > #PIN CONFIGURATION NODES > patternProperties: > '-state$': > oneOf: > - $ref: "#/$defs/qcom-sm6115-tlmm-state" > - patternProperties: > ".*": > $ref: "#/$defs/qcom-sm6115-tlmm-state" > > - ufs phy: binding complains about missing #clock and #phy -cells. The > outer binding is never used as a clock or a phy (via reference), and > I don't think it will be. Also none of the other ufs phy dts files has > those props > - usb: according to schema, there should be 4 interrupts, but some have > 2 (like sm6115), and some have none. I see no such interrupts on DS. Are > they defined elsewhere? > > arch/arm64/boot/dts/qcom/sm6115.dtsi | 904 +++++++++++++++++++++++++++ > 1 file changed, 904 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sm6115.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi > new file mode 100644 > index 000000000000..a1a5dc24e4db > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi > @@ -0,0 +1,904 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (c) 2021, Iskren Chernev <iskren.chernev@gmail.com> > + */ > + > +#include <dt-bindings/clock/qcom,gcc-sm6115.h> > +#include <dt-bindings/clock/qcom,rpmcc.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/power/qcom-rpmpd.h> > + > +/ { > + interrupt-parent = <&intc>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + chosen { }; > + > + clocks { > + xo_board: xo-board { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-output-names = "xo_board"; Not sure if it's necessary given you pass these to clock controllers explicitly anyway. > + }; > + > + sleep_clk: sleep-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-output-names = "sleep_clk"; > + }; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + CPU0: cpu@0 { > + device_type = "cpu"; > + compatible = "qcom,kryo260"; > + reg = <0x0 0x0>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <100>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + L2_0: l2-cache { > + compatible = "cache"; > + cache-level = <2>; > + }; > + }; > + > + CPU1: cpu@1 { > + device_type = "cpu"; > + compatible = "qcom,kryo260"; > + reg = <0x0 0x1>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <100>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + }; > + > + CPU2: cpu@2 { > + device_type = "cpu"; > + compatible = "qcom,kryo260"; > + reg = <0x0 0x2>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <100>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + }; > + > + CPU3: cpu@3 { > + device_type = "cpu"; > + compatible = "qcom,kryo260"; > + reg = <0x0 0x3>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <100>; > + enable-method = "psci"; > + next-level-cache = <&L2_0>; > + }; > + > + CPU4: cpu@100 { > + device_type = "cpu"; > + compatible = "qcom,kryo260"; > + reg = <0x0 0x100>; > + enable-method = "psci"; > + capacity-dmips-mhz = <1638>; > + dynamic-power-coefficient = <282>; > + next-level-cache = <&L2_1>; > + L2_1: l2-cache { > + compatible = "cache"; > + cache-level = <2>; > + }; > + }; > + > + CPU5: cpu@101 { > + device_type = "cpu"; > + compatible = "qcom,kryo260"; > + reg = <0x0 0x101>; > + capacity-dmips-mhz = <1638>; > + dynamic-power-coefficient = <282>; > + enable-method = "psci"; > + next-level-cache = <&L2_1>; > + }; > + > + CPU6: cpu@102 { > + device_type = "cpu"; > + compatible = "qcom,kryo260"; > + reg = <0x0 0x102>; > + capacity-dmips-mhz = <1638>; > + dynamic-power-coefficient = <282>; > + enable-method = "psci"; > + next-level-cache = <&L2_1>; > + }; > + > + CPU7: cpu@103 { > + device_type = "cpu"; > + compatible = "qcom,kryo260"; > + reg = <0x0 0x103>; > + capacity-dmips-mhz = <1638>; > + dynamic-power-coefficient = <282>; > + enable-method = "psci"; > + next-level-cache = <&L2_1>; > + }; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&CPU0>; > + }; > + > + core1 { > + cpu = <&CPU1>; > + }; > + > + core2 { > + cpu = <&CPU2>; > + }; > + > + core3 { > + cpu = <&CPU3>; > + }; > + }; > + > + cluster1 { > + core0 { > + cpu = <&CPU4>; > + }; > + > + core1 { > + cpu = <&CPU5>; > + }; > + > + core2 { > + cpu = <&CPU6>; > + }; > + > + core3 { > + cpu = <&CPU7>; > + }; > + }; > + }; > + }; > + > + firmware { > + scm: scm { > + compatible = "qcom,scm-sm6115", "qcom,scm"; > + #reset-cells = <1>; > + }; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + /* We expect the bootloader to fill in the size */ > + reg = <0 0x80000000 0 0>; > + }; > + > + pmu { > + compatible = "arm,armv8-pmuv3"; > + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + psci { > + compatible = "arm,psci-1.0"; > + method = "smc"; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + hyp_mem: memory@45700000 { > + reg = <0x0 0x45700000 0x0 0x600000>; > + no-map; > + }; > + > + xbl_aop_mem: memory@45e00000 { > + reg = <0x0 0x45e00000 0x0 0x140000>; > + no-map; > + }; > + > + sec_apps_mem: memory@45fff000 { > + reg = <0x0 0x45fff000 0x0 0x1000>; > + no-map; > + }; > + > + smem_mem: memory@46000000 { > + reg = <0x0 0x46000000 0x0 0x200000>; > + no-map; > + }; > + > + cdsp_sec_mem: memory@46200000 { > + reg = <0x0 0x46200000 0x0 0x1e00000>; > + no-map; > + }; > + > + pil_modem_mem: memory@4ab00000 { > + reg = <0x0 0x4ab00000 0x0 0x6900000>; > + no-map; > + }; > + > + pil_video_mem: memory@51400000 { > + reg = <0x0 0x51400000 0x0 0x500000>; > + no-map; > + }; > + > + wlan_msa_mem: memory@51900000 { > + reg = <0x0 0x51900000 0x0 0x100000>; > + no-map; > + }; > + > + pil_cdsp_mem: memory@51a00000 { > + reg = <0x0 0x51a00000 0x0 0x1e00000>; > + no-map; > + }; > + > + pil_adsp_mem: memory@53800000 { > + reg = <0x0 0x53800000 0x0 0x2800000>; > + no-map; > + }; > + > + pil_ipa_fw_mem: memory@56100000 { > + reg = <0x0 0x56100000 0x0 0x10000>; > + no-map; > + }; > + > + pil_ipa_gsi_mem: memory@56110000 { > + reg = <0x0 0x56110000 0x0 0x5000>; > + no-map; > + }; > + > + pil_gpu_mem: memory@56115000 { > + reg = <0x0 0x56115000 0x0 0x2000>; > + no-map; > + }; > + > + cont_splash_memory: memory@5c000000 { > + reg = <0x0 0x5c000000 0x0 0x00f00000>; > + no-map; > + }; > + > + dfps_data_memory: memory@5cf00000 { > + reg = <0x0 0x5cf00000 0x0 0x0100000>; > + no-map; > + }; > + > + removed_mem: memory@60000000 { > + reg = <0x0 0x60000000 0x0 0x3900000>; > + no-map; > + }; > + > + secure_display_memory: memory@f3c00000 { > + reg = <0x0 0xf3c00000 0x0 0x5c00000>; > + no-map; > + }; > + > + dump_mem: memory@f9800000 { > + reg = <0x0 0xf9800000 0x0 0x800000>; > + no-map; > + }; > + > + adsp_mem: memory@fa000000 { > + reg = <0x0 0xfa000000 0x0 0x800000>; > + no-map; > + }; > + > + qseecom_mem: memory@fa800000 { > + reg = <0x0 0xfa800000 0x0 0x1400000>; > + no-map; > + }; > + > + user_contig_mem: memory@fbc00000 { > + reg = <0x0 0xfbc00000 0x0 0x1000000>; Pretty sure this and linux_cma_mem don't need to be reserved at a precise location.. I might be wrong, though.. > + no-map; > + }; > + > + qseecom_ta_mem: memory@fcc00000 { > + reg = <0x0 0xfcc00000 0x0 0x1000000>; > + no-map; > + }; > + > + linux_cma_mem: memory@fdc00000 { > + reg = <0x0 0xfdc00000 0x0 0x2000000>; > + no-map; > + }; > + > + }; > + > + rpm-glink { > + compatible = "qcom,glink-rpm"; > + > + interrupts = <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>; > + qcom,rpm-msg-ram = <&rpm_msg_ram>; > + mboxes = <&apcs_glb 0>; > + > + rpm_requests: rpm-requests { > + compatible = "qcom,rpm-sm6115"; > + qcom,glink-channels = "rpm_requests"; > + > + rpmcc: clock-controller { > + compatible = "qcom,rpmcc-sm6115", "qcom,rpmcc"; > + #clock-cells = <1>; > + }; > + > + rpmpd: power-controller { > + compatible = "qcom,sm6115-rpmpd"; > + #power-domain-cells = <1>; > + operating-points-v2 = <&rpmpd_opp_table>; > + > + rpmpd_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + rpmpd_opp_min_svs: opp1 { > + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; > + }; > + > + rpmpd_opp_low_svs: opp2 { > + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; > + }; > + > + rpmpd_opp_svs: opp3 { > + opp-level = <RPM_SMD_LEVEL_SVS>; > + }; > + > + rpmpd_opp_svs_plus: opp4 { > + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; > + }; > + > + rpmpd_opp_nom: opp5 { > + opp-level = <RPM_SMD_LEVEL_NOM>; > + }; > + > + rpmpd_opp_nom_plus: opp6 { > + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; > + }; > + > + rpmpd_opp_turbo: opp7 { > + opp-level = <RPM_SMD_LEVEL_TURBO>; > + }; > + > + rpmpd_opp_turbo_plus: opp8 { > + opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>; > + }; > + }; > + }; > + }; > + }; > + > + smem { > + compatible = "qcom,smem"; > + memory-region = <&smem_mem>; > + qcom,rpm-msg-ram = <&rpm_msg_ram>; > + hwlocks = <&tcsr_mutex 3>; > + }; > + > + soc: soc { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0 0xffffffff>; > + > + tlmm: pinctrl@500000 { > + compatible = "qcom,sm6115-tlmm"; > + reg = <0x500000 0x400000>, > + <0x900000 0x400000>, Bad indentation. > + <0xd00000 0x400000>; > + reg-names = "west", "south", "east"; > + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + gpio-ranges = <&tlmm 0 0 121>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + sdc1_state_on: sdc1-on-state { > + clk { > + pins = "sdc1_clk"; > + bias-disable; > + drive-strength = <16>; > + }; > + > + cmd { > + pins = "sdc1_cmd"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + data { > + pins = "sdc1_data"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + rclk { > + pins = "sdc1_rclk"; > + bias-pull-down; > + }; > + }; > + > + sdc1_state_off: sdc1-off-state { > + clk { > + pins = "sdc1_clk"; > + bias-disable; > + drive-strength = <2>; > + }; > + > + cmd { > + pins = "sdc1_cmd"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + > + data { > + pins = "sdc1_data"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + > + rclk { > + pins = "sdc1_rclk"; > + bias-pull-down; > + }; > + }; > + > + sdc2_state_on: sdc2-on-state { > + clk { > + pins = "sdc2_clk"; > + bias-disable; > + drive-strength = <16>; > + }; > + > + cmd { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + data { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <10>; > + }; > + > + sd-cd { > + pins = "gpio88"; > + function = "gpio"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + }; > + > + sdc2_state_off: sdc2-off-state { > + clk { > + pins = "sdc2_clk"; > + bias-disable; > + drive-strength = <2>; > + }; > + > + cmd { > + pins = "sdc2_cmd"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + > + data { > + pins = "sdc2_data"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + > + sd-cd { > + pins = "gpio88"; > + function = "gpio"; > + bias-disable; > + drive-strength = <2>; > + }; > + }; > + }; > + > + gcc: clock-controller@1400000 { > + compatible = "qcom,gcc-sm6115"; > + reg = <0x1400000 0x1f0000>; > + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>; > + clock-names = "bi_tcxo", "sleep_clk"; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > + hsusb_phy: phy@1613000 { > + compatible = "qcom,sm6115-qusb2-phy"; > + reg = <0x1613000 0x180>; > + #phy-cells = <0>; > + > + clocks = <&gcc GCC_AHB2PHY_USB_CLK>, > + <&rpmcc RPM_SMD_XO_CLK_SRC>; > + clock-names = "cfg_ahb", "ref"; > + > + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; > + nvmem-cells = <&qusb2_hstx_trim>; > + > + status = "disabled"; > + }; > + > + qfprom@1b40000 { > + compatible = "qcom,sm6115-qfprom", "qcom,qfprom"; > + reg = <0x1b40000 0x7000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + qusb2_hstx_trim: hstx-trim@25b { > + reg = <0x25b 0x1>; > + bits = <1 4>; > + }; > + }; > + > + spmi_bus: spmi@1c40000 { > + compatible = "qcom,spmi-pmic-arb"; > + reg = <0x1c40000 0x1100>, > + <0x1e00000 0x2000000>, > + <0x3e00000 0x100000>, > + <0x3f00000 0xa0000>, > + <0x1c0a000 0x26000>; > + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; > + interrupt-names = "periph_irq"; > + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; > + qcom,ee = <0>; > + qcom,channel = <0>; > + #address-cells = <2>; > + #size-cells = <0>; > + interrupt-controller; > + #interrupt-cells = <4>; > + }; > + > + tcsr_mutex: hwlock@1f40000 { > + compatible = "qcom,tcsr-mutex"; > + reg = <0x340000 0x20000>; > + #hwlock-cells = <1>; > + }; > + > + rpm_msg_ram: sram@45f0000 { > + compatible = "qcom,rpm-msg-ram"; > + reg = <0x45f0000 0x7000>; > + }; > + > + sdhc_1: mmc@4744000 { > + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; > + reg = <0x4744000 0x1000>, <0x4745000 0x1000>, <0x4748000 0x8000>; > + reg-names = "hc", "cqhci", "ice"; > + > + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; Bad indentation. > + interrupt-names = "hc_irq", "pwr_irq"; > + > + clocks = <&gcc GCC_SDCC1_AHB_CLK>, > + <&gcc GCC_SDCC1_APPS_CLK>, > + <&xo_board>, > + <&gcc GCC_SDCC1_ICE_CORE_CLK>; > + clock-names = "iface", "core", "xo", "ice"; > + > + pinctrl-0 = <&sdc1_state_on>, <&sdc1_state_off>; > + pinctrl-names = "default", "sleep"; > + > + bus-width = <8>; > + status = "disabled"; > + }; > + > + sdhc_2: mmc@4784000 { > + compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5"; > + reg = <0x04784000 0x1000>; > + reg-names = "hc"; > + > + interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; Bad indentation. > + interrupt-names = "hc_irq", "pwr_irq"; > + > + clocks = <&gcc GCC_SDCC2_AHB_CLK>, > + <&gcc GCC_SDCC2_APPS_CLK>, > + <&xo_board>; > + clock-names = "iface", "core", "xo"; > + > + pinctrl-0 = <&sdc2_state_on>, <&sdc2_state_off>; > + pinctrl-names = "default", "sleep"; > + > + power-domains = <&rpmpd SM6115_VDDCX>; > + operating-points-v2 = <&sdhc2_opp_table>; > + iommus = <&apps_smmu 0x00a0 0x0>; > + resets = <&gcc GCC_SDCC2_BCR>; > + > + bus-width = <4>; > + qcom,dll-config = <0x0007642c>; > + qcom,ddr-config = <0x80040868>; > + status = "disabled"; > + > + sdhc2_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-100000000 { > + opp-hz = /bits/ 64 <100000000>; > + required-opps = <&rpmpd_opp_low_svs>; > + }; > + > + opp-202000000 { > + opp-hz = /bits/ 64 <202000000>; > + required-opps = <&rpmpd_opp_nom>; > + }; > + }; > + }; > + > + ufs_mem_hc: ufs@4804000 { > + compatible = "qcom,sm6115-ufshc", "qcom,ufshc", > + "jedec,ufs-2.0"; Wouldn't this fit in a single, 100char line? > + reg = <0x4804000 0x3000>, <0x4810000 0x8000>; > + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&ufs_mem_phy_lanes>; > + phy-names = "ufsphy"; > + lanes-per-direction = <1>; > + #reset-cells = <1>; > + resets = <&gcc GCC_UFS_PHY_BCR>; > + reset-names = "rst"; > + > + power-domains = <&gcc GCC_UFS_PHY_GDSC>; > + iommus = <&apps_smmu 0x100 0>; > + > + clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, > + <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>, > + <&gcc GCC_UFS_PHY_AHB_CLK>, > + <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>, > + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>, > + <&rpmcc RPM_SMD_XO_CLK_SRC>, > + <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, > + <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>; > + clock-names = "core_clk", > + "bus_aggr_clk", > + "iface_clk", > + "core_clk_unipro", > + "core_clk_ice", > + "ref_clk", > + "tx_lane0_sync_clk", > + "rx_lane0_sync_clk"; > + > + freq-table-hz = <50000000 200000000>, > + <0 0>, > + <0 0>, > + <37500000 150000000>, > + <75000000 300000000>, > + <0 0>, > + <0 0>, > + <0 0>; > + > + status = "disabled"; > + }; > + > + ufs_mem_phy: phy@4807000 { > + compatible = "qcom,sm6115-qmp-ufs-phy"; > + reg = <0x4807000 0x1c4>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + clocks = <&gcc GCC_UFS_CLKREF_CLK>, > + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>; > + clock-names = "ref", "ref_aux"; > + > + resets = <&ufs_mem_hc 0>; > + reset-names = "ufsphy"; > + status = "disabled"; > + > + ufs_mem_phy_lanes: phy@4807400 { > + reg = <0x4807400 0x098>, > + <0x4807600 0x130>, > + <0x4807c00 0x16c>; > + #phy-cells = <0>; > + }; > + }; > + > + usb3: usb@4ef8800 { > + compatible = "qcom,sm6115-dwc3", "qcom,dwc3"; > + reg = <0x04ef8800 0x400>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, > + <&gcc GCC_USB30_PRIM_MASTER_CLK>, > + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, > + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, > + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, > + <&gcc GCC_USB3_PRIM_CLKREF_CLK>; > + clock-names = "cfg_noc", "core", "iface", "mock_utmi", > + "sleep", "xo"; > + > + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, > + <&gcc GCC_USB30_PRIM_MASTER_CLK>; > + assigned-clock-rates = <19200000>, <66666667>; > + > + interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "hs_phy_irq", "ss_phy_irq"; > + > + resets = <&gcc GCC_USB30_PRIM_BCR>; > + power-domains = <&gcc GCC_USB30_PRIM_GDSC>; > + qcom,select-utmi-as-pipe-clk; > + status = "disabled"; > + > + usb3_dwc3: usb@4e00000 { > + compatible = "snps,dwc3"; > + reg = <0x04e00000 0xcd00>; > + interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; > + phys = <&hsusb_phy>; > + phy-names = "usb2-phy"; > + iommus = <&apps_smmu 0x120 0x0>; > + snps,dis_u2_susphy_quirk; > + snps,dis_enblslpm_quirk; > + snps,has-lpm-erratum; > + snps,hird-threshold = /bits/ 8 <0x10>; > + snps,usb3_lpm_capable; > + maximum-speed = "high-speed"; > + dr_mode = "peripheral"; > + }; > + }; > + > + apps_smmu: iommu@c600000 { > + compatible = "qcom,sm6115-smmu-500", "arm,mmu-500"; > + reg = <0xc600000 0x80000>; > + #iommu-cells = <2>; > + #global-interrupts = <1>; > + > + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + apcs_glb: mailbox@f111000 { > + compatible = "qcom,sm6115-apcs-hmss-global"; > + reg = <0xf111000 0x1000>; > + > + #mbox-cells = <1>; > + }; > + > + timer@f120000 { > + compatible = "arm,armv7-timer-mem"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + reg = <0xf120000 0x1000>; > + clock-frequency = <19200000>; > + > + frame@f121000 { > + frame-number = <0>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf121000 0x1000>, > + <0xf122000 0x1000>; > + }; > + > + frame@f123000 { > + frame-number = <1>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf123000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f124000 { > + frame-number = <2>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf124000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f125000 { > + frame-number = <3>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf125000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f126000 { > + frame-number = <4>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf126000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f127000 { > + frame-number = <5>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf127000 0x1000>; > + status = "disabled"; > + }; > + > + frame@f128000 { > + frame-number = <6>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0xf128000 0x1000>; > + status = "disabled"; > + }; > + }; > + > + intc: interrupt-controller@f200000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + interrupt-controller; > + interrupt-parent = <&intc>; > + #redistributor-regions = <1>; > + redistributor-stride = <0x0 0x20000>; > + reg = <0xf200000 0x10000>, > + <0xf300000 0x100000>; Compatible first, reg second. > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; > + }; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 1 0xf08>, > + <GIC_PPI 2 0xf08>, > + <GIC_PPI 3 0xf08>, > + <GIC_PPI 0 0xf08>; > + clock-frequency = <19200000>; Remove clock-frequency if the platform boots without it. Konrad > + }; > +};