mbox series

[0/8] spi: Introduce spi-cs-setup-ns dt property

Message ID 20221117105249.115649-1-tudor.ambarus@microchip.com
Headers show
Series spi: Introduce spi-cs-setup-ns dt property | expand

Message

Tudor Ambarus Nov. 17, 2022, 10:52 a.m. UTC 
SPI NOR flashes have specific cs-setup time requirements without which
they can't work at frequencies close to their maximum supported frequency,
as they miss the first bits of the instruction command. Unrecognized
commands are ignored, thus the flash will be unresponsive. Introduce the
spi-cs-setup-ns property to allow spi devices to specify their cs setup
time.

Tudor Ambarus (8):
  spi: dt-bindings: Introduce spi-cs-setup-ns property
  spi: Introduce spi-cs-setup-ns property
  spi: Reintroduce spi_set_cs_timing()
  spi: atmel-quadspi: Add support for configuring CS timing
  ARM: dts: at91-sama5d27_wlsom1: Set sst26vf064b SPI NOR flash at its
    maximum frequency
  ARM: dts: at91-sama5d27_som1: Set sst26vf064b SPI NOR flash at its
    maximum frequency
  ARM: dts: at91: sama5d2_icp: Set sst26vf064b SPI NOR flash at its
    maximum frequency
  ARM: dts: at91: sam9x60ek: Set sst26vf064b SPI NOR flash at its
    maximum frequency

 .../bindings/spi/spi-peripheral-props.yaml    |  5 +++
 arch/arm/boot/dts/at91-sam9x60ek.dts          |  3 +-
 arch/arm/boot/dts/at91-sama5d27_som1.dtsi     |  3 +-
 arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi   |  3 +-
 arch/arm/boot/dts/at91-sama5d2_icp.dts        |  3 +-
 drivers/spi/atmel-quadspi.c                   | 34 +++++++++++++++
 drivers/spi/spi.c                             | 43 +++++++++++++++++++
 7 files changed, 90 insertions(+), 4 deletions(-)