| Message ID | 20230410135948.11970-1-quic_devipriy@quicinc.com |
|---|---|
| Headers | show |
| Series | Add minimal boot support for IPQ9574 | expand |
On 10.04.2023 15:59, Devi Priya wrote: > Add initial device tree support for Qualcomm IPQ9574 SoC and > Reference Design Platform(RDP) 433 which is based on IPQ9574 > family of SoCs > > Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> > Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> > Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> > Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> > Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> > --- > + soc: soc@0 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0 0xffffffff>; this is equal to: ranges; Could you fix that up when applying, Bjorn, should there be no other issues? Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > + > + tlmm: pinctrl@1000000 { > + compatible = "qcom,ipq9574-tlmm"; > + reg = <0x01000000 0x300000>; > + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; > + gpio-controller; > + #gpio-cells = <2>; > + gpio-ranges = <&tlmm 0 0 65>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + uart2_pins: uart2-state { > + pins = "gpio34", "gpio35"; > + function = "blsp2_uart"; > + drive-strength = <8>; > + bias-disable; > + }; > + }; > + > + gcc: clock-controller@1800000 { > + compatible = "qcom,ipq9574-gcc"; > + reg = <0x01800000 0x80000>; > + clocks = <&xo_board_clk>, > + <&sleep_clk>, > + <0>, > + <0>, > + <0>, > + <0>, > + <0>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > + sdhc_1: mmc@7804000 { > + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; > + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; > + reg-names = "hc", "cqhci"; > + > + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "hc_irq", "pwr_irq"; > + > + clocks = <&gcc GCC_SDCC1_AHB_CLK>, > + <&gcc GCC_SDCC1_APPS_CLK>, > + <&xo_board_clk>; > + clock-names = "iface", "core", "xo"; > + non-removable; > + status = "disabled"; > + }; > + > + blsp1_uart2: serial@78b1000 { > + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; > + reg = <0x078b1000 0x200>; > + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, > + <&gcc GCC_BLSP1_AHB_CLK>; > + clock-names = "core", "iface"; > + status = "disabled"; > + }; > + > + intc: interrupt-controller@b000000 { > + compatible = "qcom,msm-qgic2"; > + reg = <0x0b000000 0x1000>, /* GICD */ > + <0x0b002000 0x2000>, /* GICC */ > + <0x0b001000 0x1000>, /* GICH */ > + <0x0b004000 0x2000>; /* GICV */ > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-controller; > + #interrupt-cells = <3>; > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; > + ranges = <0 0x0b00c000 0x3000>; > + > + v2m0: v2m@0 { > + compatible = "arm,gic-v2m-frame"; > + reg = <0x00000000 0xffd>; > + msi-controller; > + }; > + > + v2m1: v2m@1000 { > + compatible = "arm,gic-v2m-frame"; > + reg = <0x00001000 0xffd>; > + msi-controller; > + }; > + > + v2m2: v2m@2000 { > + compatible = "arm,gic-v2m-frame"; > + reg = <0x00002000 0xffd>; > + msi-controller; > + }; > + }; > + > + timer@b120000 { > + compatible = "arm,armv7-timer-mem"; > + reg = <0x0b120000 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + frame@b120000 { > + reg = <0x0b121000 0x1000>, > + <0x0b122000 0x1000>; > + frame-number = <0>; > + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + frame@b123000 { > + reg = <0x0b123000 0x1000>; > + frame-number = <1>; > + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b124000 { > + reg = <0x0b124000 0x1000>; > + frame-number = <2>; > + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b125000 { > + reg = <0x0b125000 0x1000>; > + frame-number = <3>; > + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b126000 { > + reg = <0x0b126000 0x1000>; > + frame-number = <4>; > + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b127000 { > + reg = <0x0b127000 0x1000>; > + frame-number = <5>; > + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + > + frame@b128000 { > + reg = <0x0b128000 0x1000>; > + frame-number = <6>; > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; > + status = "disabled"; > + }; > + }; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + }; > +};
On 4/13/2023 2:16 AM, Konrad Dybcio wrote: > > > On 10.04.2023 15:59, Devi Priya wrote: >> Add initial device tree support for Qualcomm IPQ9574 SoC and >> Reference Design Platform(RDP) 433 which is based on IPQ9574 >> family of SoCs >> >> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >> --- > >> + soc: soc@0 { >> + compatible = "simple-bus"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges = <0 0 0 0xffffffff>; > this is equal to: > > ranges; Konrad, on updating (ranges = <0 0 0 0xffffffff>; --> ranges;) we see the below warnings: arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): /soc@0:ranges: empty "ranges" property but its #address-cells (1) differs from / (2) arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): /soc@0:ranges: empty "ranges" property but its #size-cells (1) differs from / (2) Looks like, empty ranges property isn't supported if the parent and child address spaces are non-identical. Would you suggest to retain the ranges as such? (ranges = <0 0 0 0xffffffff>;) Thanks, Devi Priya > > Could you fix that up when applying, Bjorn, should there be > no other issues? > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Thank you! > Konrad > >> + >> + tlmm: pinctrl@1000000 { >> + compatible = "qcom,ipq9574-tlmm"; >> + reg = <0x01000000 0x300000>; >> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + gpio-ranges = <&tlmm 0 0 65>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + >> + uart2_pins: uart2-state { >> + pins = "gpio34", "gpio35"; >> + function = "blsp2_uart"; >> + drive-strength = <8>; >> + bias-disable; >> + }; >> + }; >> + >> + gcc: clock-controller@1800000 { >> + compatible = "qcom,ipq9574-gcc"; >> + reg = <0x01800000 0x80000>; >> + clocks = <&xo_board_clk>, >> + <&sleep_clk>, >> + <0>, >> + <0>, >> + <0>, >> + <0>, >> + <0>; >> + #clock-cells = <1>; >> + #reset-cells = <1>; >> + #power-domain-cells = <1>; >> + }; >> + >> + sdhc_1: mmc@7804000 { >> + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; >> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; >> + reg-names = "hc", "cqhci"; >> + >> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; >> + interrupt-names = "hc_irq", "pwr_irq"; >> + >> + clocks = <&gcc GCC_SDCC1_AHB_CLK>, >> + <&gcc GCC_SDCC1_APPS_CLK>, >> + <&xo_board_clk>; >> + clock-names = "iface", "core", "xo"; >> + non-removable; >> + status = "disabled"; >> + }; >> + >> + blsp1_uart2: serial@78b1000 { >> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; >> + reg = <0x078b1000 0x200>; >> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; >> + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, >> + <&gcc GCC_BLSP1_AHB_CLK>; >> + clock-names = "core", "iface"; >> + status = "disabled"; >> + }; >> + >> + intc: interrupt-controller@b000000 { >> + compatible = "qcom,msm-qgic2"; >> + reg = <0x0b000000 0x1000>, /* GICD */ >> + <0x0b002000 0x2000>, /* GICC */ >> + <0x0b001000 0x1000>, /* GICH */ >> + <0x0b004000 0x2000>; /* GICV */ >> + #address-cells = <1>; >> + #size-cells = <1>; >> + interrupt-controller; >> + #interrupt-cells = <3>; >> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; >> + ranges = <0 0x0b00c000 0x3000>; >> + >> + v2m0: v2m@0 { >> + compatible = "arm,gic-v2m-frame"; >> + reg = <0x00000000 0xffd>; >> + msi-controller; >> + }; >> + >> + v2m1: v2m@1000 { >> + compatible = "arm,gic-v2m-frame"; >> + reg = <0x00001000 0xffd>; >> + msi-controller; >> + }; >> + >> + v2m2: v2m@2000 { >> + compatible = "arm,gic-v2m-frame"; >> + reg = <0x00002000 0xffd>; >> + msi-controller; >> + }; >> + }; >> + >> + timer@b120000 { >> + compatible = "arm,armv7-timer-mem"; >> + reg = <0x0b120000 0x1000>; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + frame@b120000 { >> + reg = <0x0b121000 0x1000>, >> + <0x0b122000 0x1000>; >> + frame-number = <0>; >> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, >> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; >> + }; >> + >> + frame@b123000 { >> + reg = <0x0b123000 0x1000>; >> + frame-number = <1>; >> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b124000 { >> + reg = <0x0b124000 0x1000>; >> + frame-number = <2>; >> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b125000 { >> + reg = <0x0b125000 0x1000>; >> + frame-number = <3>; >> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b126000 { >> + reg = <0x0b126000 0x1000>; >> + frame-number = <4>; >> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b127000 { >> + reg = <0x0b127000 0x1000>; >> + frame-number = <5>; >> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + >> + frame@b128000 { >> + reg = <0x0b128000 0x1000>; >> + frame-number = <6>; >> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; >> + status = "disabled"; >> + }; >> + }; >> + }; >> + >> + timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; >> + }; >> +};
On 14.04.2023 12:01, Devi Priya wrote: > > > On 4/13/2023 2:16 AM, Konrad Dybcio wrote: >> >> >> On 10.04.2023 15:59, Devi Priya wrote: >>> Add initial device tree support for Qualcomm IPQ9574 SoC and >>> Reference Design Platform(RDP) 433 which is based on IPQ9574 >>> family of SoCs >>> >>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >>> --- >> >>> + soc: soc@0 { >>> + compatible = "simple-bus"; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + ranges = <0 0 0 0xffffffff>; >> this is equal to: >> >> ranges; > > Konrad, on updating (ranges = <0 0 0 0xffffffff>; --> ranges;) > we see the below warnings: > arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): > /soc@0:ranges: empty "ranges" property but its #address-cells (1) > differs from / (2) > arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): /soc@0:ranges: empty "ranges" property but its #size-cells (1) differs > from / (2) > > Looks like, empty ranges property isn't supported if the parent and > child address spaces are non-identical. > Would you suggest to retain the ranges as such? > (ranges = <0 0 0 0xffffffff>;) > > Thanks, > Devi Priya Oh right, you have address/size cells = 2 at the top level. Forget about this change. Konrad >> >> Could you fix that up when applying, Bjorn, should there be >> no other issues? >> >> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> >> > Thank you! >> Konrad >> >>> + >>> + tlmm: pinctrl@1000000 { >>> + compatible = "qcom,ipq9574-tlmm"; >>> + reg = <0x01000000 0x300000>; >>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >>> + gpio-controller; >>> + #gpio-cells = <2>; >>> + gpio-ranges = <&tlmm 0 0 65>; >>> + interrupt-controller; >>> + #interrupt-cells = <2>; >>> + >>> + uart2_pins: uart2-state { >>> + pins = "gpio34", "gpio35"; >>> + function = "blsp2_uart"; >>> + drive-strength = <8>; >>> + bias-disable; >>> + }; >>> + }; >>> + >>> + gcc: clock-controller@1800000 { >>> + compatible = "qcom,ipq9574-gcc"; >>> + reg = <0x01800000 0x80000>; >>> + clocks = <&xo_board_clk>, >>> + <&sleep_clk>, >>> + <0>, >>> + <0>, >>> + <0>, >>> + <0>, >>> + <0>; >>> + #clock-cells = <1>; >>> + #reset-cells = <1>; >>> + #power-domain-cells = <1>; >>> + }; >>> + >>> + sdhc_1: mmc@7804000 { >>> + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; >>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; >>> + reg-names = "hc", "cqhci"; >>> + >>> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; >>> + interrupt-names = "hc_irq", "pwr_irq"; >>> + >>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>, >>> + <&gcc GCC_SDCC1_APPS_CLK>, >>> + <&xo_board_clk>; >>> + clock-names = "iface", "core", "xo"; >>> + non-removable; >>> + status = "disabled"; >>> + }; >>> + >>> + blsp1_uart2: serial@78b1000 { >>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; >>> + reg = <0x078b1000 0x200>; >>> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; >>> + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, >>> + <&gcc GCC_BLSP1_AHB_CLK>; >>> + clock-names = "core", "iface"; >>> + status = "disabled"; >>> + }; >>> + >>> + intc: interrupt-controller@b000000 { >>> + compatible = "qcom,msm-qgic2"; >>> + reg = <0x0b000000 0x1000>, /* GICD */ >>> + <0x0b002000 0x2000>, /* GICC */ >>> + <0x0b001000 0x1000>, /* GICH */ >>> + <0x0b004000 0x2000>; /* GICV */ >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + interrupt-controller; >>> + #interrupt-cells = <3>; >>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; >>> + ranges = <0 0x0b00c000 0x3000>; >>> + >>> + v2m0: v2m@0 { >>> + compatible = "arm,gic-v2m-frame"; >>> + reg = <0x00000000 0xffd>; >>> + msi-controller; >>> + }; >>> + >>> + v2m1: v2m@1000 { >>> + compatible = "arm,gic-v2m-frame"; >>> + reg = <0x00001000 0xffd>; >>> + msi-controller; >>> + }; >>> + >>> + v2m2: v2m@2000 { >>> + compatible = "arm,gic-v2m-frame"; >>> + reg = <0x00002000 0xffd>; >>> + msi-controller; >>> + }; >>> + }; >>> + >>> + timer@b120000 { >>> + compatible = "arm,armv7-timer-mem"; >>> + reg = <0x0b120000 0x1000>; >>> + #address-cells = <1>; >>> + #size-cells = <1>; >>> + ranges; >>> + >>> + frame@b120000 { >>> + reg = <0x0b121000 0x1000>, >>> + <0x0b122000 0x1000>; >>> + frame-number = <0>; >>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, >>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; >>> + }; >>> + >>> + frame@b123000 { >>> + reg = <0x0b123000 0x1000>; >>> + frame-number = <1>; >>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; >>> + status = "disabled"; >>> + }; >>> + >>> + frame@b124000 { >>> + reg = <0x0b124000 0x1000>; >>> + frame-number = <2>; >>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; >>> + status = "disabled"; >>> + }; >>> + >>> + frame@b125000 { >>> + reg = <0x0b125000 0x1000>; >>> + frame-number = <3>; >>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; >>> + status = "disabled"; >>> + }; >>> + >>> + frame@b126000 { >>> + reg = <0x0b126000 0x1000>; >>> + frame-number = <4>; >>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; >>> + status = "disabled"; >>> + }; >>> + >>> + frame@b127000 { >>> + reg = <0x0b127000 0x1000>; >>> + frame-number = <5>; >>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; >>> + status = "disabled"; >>> + }; >>> + >>> + frame@b128000 { >>> + reg = <0x0b128000 0x1000>; >>> + frame-number = <6>; >>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; >>> + status = "disabled"; >>> + }; >>> + }; >>> + }; >>> + >>> + timer { >>> + compatible = "arm,armv8-timer"; >>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; >>> + }; >>> +};
On 4/14/2023 4:27 PM, Konrad Dybcio wrote: > > > On 14.04.2023 12:01, Devi Priya wrote: >> >> >> On 4/13/2023 2:16 AM, Konrad Dybcio wrote: >>> >>> >>> On 10.04.2023 15:59, Devi Priya wrote: >>>> Add initial device tree support for Qualcomm IPQ9574 SoC and >>>> Reference Design Platform(RDP) 433 which is based on IPQ9574 >>>> family of SoCs >>>> >>>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com> >>>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com> >>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> >>>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com> >>>> --- >>> >>>> + soc: soc@0 { >>>> + compatible = "simple-bus"; >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + ranges = <0 0 0 0xffffffff>; >>> this is equal to: >>> >>> ranges; >> >> Konrad, on updating (ranges = <0 0 0 0xffffffff>; --> ranges;) >> we see the below warnings: >> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): >> /soc@0:ranges: empty "ranges" property but its #address-cells (1) >> differs from / (2) >> arch/arm64/boot/dts/qcom/ipq9574.dtsi:103.3-10: Warning (ranges_format): /soc@0:ranges: empty "ranges" property but its #size-cells (1) differs >> from / (2) >> >> Looks like, empty ranges property isn't supported if the parent and >> child address spaces are non-identical. >> Would you suggest to retain the ranges as such? >> (ranges = <0 0 0 0xffffffff>;) >> >> Thanks, >> Devi Priya > Oh right, you have address/size cells = 2 at the top level. > Forget about this change. Yup, thanks! Best Regards, Devi Priya > > Konrad >>> >>> Could you fix that up when applying, Bjorn, should there be >>> no other issues? >>> >>> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> >>> >> Thank you! >>> Konrad >>> >>>> + >>>> + tlmm: pinctrl@1000000 { >>>> + compatible = "qcom,ipq9574-tlmm"; >>>> + reg = <0x01000000 0x300000>; >>>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; >>>> + gpio-controller; >>>> + #gpio-cells = <2>; >>>> + gpio-ranges = <&tlmm 0 0 65>; >>>> + interrupt-controller; >>>> + #interrupt-cells = <2>; >>>> + >>>> + uart2_pins: uart2-state { >>>> + pins = "gpio34", "gpio35"; >>>> + function = "blsp2_uart"; >>>> + drive-strength = <8>; >>>> + bias-disable; >>>> + }; >>>> + }; >>>> + >>>> + gcc: clock-controller@1800000 { >>>> + compatible = "qcom,ipq9574-gcc"; >>>> + reg = <0x01800000 0x80000>; >>>> + clocks = <&xo_board_clk>, >>>> + <&sleep_clk>, >>>> + <0>, >>>> + <0>, >>>> + <0>, >>>> + <0>, >>>> + <0>; >>>> + #clock-cells = <1>; >>>> + #reset-cells = <1>; >>>> + #power-domain-cells = <1>; >>>> + }; >>>> + >>>> + sdhc_1: mmc@7804000 { >>>> + compatible = "qcom,ipq9574-sdhci", "qcom,sdhci-msm-v5"; >>>> + reg = <0x07804000 0x1000>, <0x07805000 0x1000>; >>>> + reg-names = "hc", "cqhci"; >>>> + >>>> + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, >>>> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; >>>> + interrupt-names = "hc_irq", "pwr_irq"; >>>> + >>>> + clocks = <&gcc GCC_SDCC1_AHB_CLK>, >>>> + <&gcc GCC_SDCC1_APPS_CLK>, >>>> + <&xo_board_clk>; >>>> + clock-names = "iface", "core", "xo"; >>>> + non-removable; >>>> + status = "disabled"; >>>> + }; >>>> + >>>> + blsp1_uart2: serial@78b1000 { >>>> + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; >>>> + reg = <0x078b1000 0x200>; >>>> + interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; >>>> + clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, >>>> + <&gcc GCC_BLSP1_AHB_CLK>; >>>> + clock-names = "core", "iface"; >>>> + status = "disabled"; >>>> + }; >>>> + >>>> + intc: interrupt-controller@b000000 { >>>> + compatible = "qcom,msm-qgic2"; >>>> + reg = <0x0b000000 0x1000>, /* GICD */ >>>> + <0x0b002000 0x2000>, /* GICC */ >>>> + <0x0b001000 0x1000>, /* GICH */ >>>> + <0x0b004000 0x2000>; /* GICV */ >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + interrupt-controller; >>>> + #interrupt-cells = <3>; >>>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; >>>> + ranges = <0 0x0b00c000 0x3000>; >>>> + >>>> + v2m0: v2m@0 { >>>> + compatible = "arm,gic-v2m-frame"; >>>> + reg = <0x00000000 0xffd>; >>>> + msi-controller; >>>> + }; >>>> + >>>> + v2m1: v2m@1000 { >>>> + compatible = "arm,gic-v2m-frame"; >>>> + reg = <0x00001000 0xffd>; >>>> + msi-controller; >>>> + }; >>>> + >>>> + v2m2: v2m@2000 { >>>> + compatible = "arm,gic-v2m-frame"; >>>> + reg = <0x00002000 0xffd>; >>>> + msi-controller; >>>> + }; >>>> + }; >>>> + >>>> + timer@b120000 { >>>> + compatible = "arm,armv7-timer-mem"; >>>> + reg = <0x0b120000 0x1000>; >>>> + #address-cells = <1>; >>>> + #size-cells = <1>; >>>> + ranges; >>>> + >>>> + frame@b120000 { >>>> + reg = <0x0b121000 0x1000>, >>>> + <0x0b122000 0x1000>; >>>> + frame-number = <0>; >>>> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, >>>> + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; >>>> + }; >>>> + >>>> + frame@b123000 { >>>> + reg = <0x0b123000 0x1000>; >>>> + frame-number = <1>; >>>> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; >>>> + status = "disabled"; >>>> + }; >>>> + >>>> + frame@b124000 { >>>> + reg = <0x0b124000 0x1000>; >>>> + frame-number = <2>; >>>> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; >>>> + status = "disabled"; >>>> + }; >>>> + >>>> + frame@b125000 { >>>> + reg = <0x0b125000 0x1000>; >>>> + frame-number = <3>; >>>> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; >>>> + status = "disabled"; >>>> + }; >>>> + >>>> + frame@b126000 { >>>> + reg = <0x0b126000 0x1000>; >>>> + frame-number = <4>; >>>> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; >>>> + status = "disabled"; >>>> + }; >>>> + >>>> + frame@b127000 { >>>> + reg = <0x0b127000 0x1000>; >>>> + frame-number = <5>; >>>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; >>>> + status = "disabled"; >>>> + }; >>>> + >>>> + frame@b128000 { >>>> + reg = <0x0b128000 0x1000>; >>>> + frame-number = <6>; >>>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; >>>> + status = "disabled"; >>>> + }; >>>> + }; >>>> + }; >>>> + >>>> + timer { >>>> + compatible = "arm,armv8-timer"; >>>> + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >>>> + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >>>> + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, >>>> + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; >>>> + }; >>>> +};