| Message ID | 20230418111612.19479-1-ddrokosov@sberdevices.ru |
|---|---|
| Headers | show |
| Series | arm64: meson: support Amlogic A1 USB OTG controller | expand |
On Tue, Apr 18, 2023 at 1:16 PM Dmitry Rokosov <ddrokosov@sberdevices.ru> wrote: > > From now, the Amlogic A1 USB controller is capable of switching between > host and gadget modes based on the status of the OTG_ID signal or via > manual USB role change. > Previously, only the Amlogic A1 IP version did not use OTG support for > host only mode, but this is no longer applicable. > Therefore, the 'otg_switch_supported' option can now be removed as > it is no longer required. > > Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
This patch series introduces full support for the Amlogic A1 USB controller in OTG mode (peripheral and host modes switching). Previously, Amlogic's patch series [1] was applied to the upstream tree, but it only had USB host mode support. Furthermore, the device tree patchset [2] wasn't merged due to a missing clk driver. Patchset [2] has been completely reworked: - changed register base offsets to proper values - introduced dwc2 in peripheral mode - OTG mode support - the SoB of Amlogic authors still remain Testing: - USB OTG role switching between gadget and host - OK - Peripheral mode - OK (tested with adb shell/push/pop) - Host mode - OK (tested only USB enumeration and detection) Changes v2 since v1 at [3]: - as Martin suggested in v1, this commit completely removes the 'otg_switch_supported' parameter from dwc3_meson_g12a_drvdata; this parameter is no longer necessary as all IP versions now support OTG switching - this commit moves the USB PHY clkin enable/disable calls to the PHY init/exit routines Links: [1] https://lore.kernel.org/all/1581990859-135234-1-git-send-email-hanjie.lin@amlogic.com/ [2] https://lore.kernel.org/all/1581990859-135234-4-git-send-email-hanjie.lin@amlogic.com/ [3] https://lore.kernel.org/all/20230414152423.19842-1-ddrokosov@sberdevices.ru/ Dmitry Rokosov (5): phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit usb: dwc2: support dwc2 IP for Amlogic A1 SoC family dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral usb: dwc3-meson-g12a: support OTG switch for all IP versions arm64: dts: meson: a1: support USB controller in OTG mode .../devicetree/bindings/usb/dwc2.yaml | 1 + arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 59 +++++++++++++++++++ drivers/phy/amlogic/phy-meson-g12a-usb2.c | 13 +++- drivers/usb/dwc2/params.c | 21 +++++++ drivers/usb/dwc3/dwc3-meson-g12a.c | 16 +---- 5 files changed, 95 insertions(+), 15 deletions(-)