mbox series

[RFC,0/3] Add CPSW9G DT support for J784S4

Message ID 20230425133223.4060752-1-s-vadapalli@ti.com
Headers show
Series Add CPSW9G DT support for J784S4 | expand

Message

Siddharth Vadapalli April 25, 2023, 1:32 p.m. UTC 
Hello,

This series adds device-tree nodes for CPSW9G instance of the CPSW
Ethernet Switch on TI's J784S4 SoC. Additionally, two device-tree
overlays are also added:
1. QSGMII mode with the CPSW9G instance via the ENET EXPANSION 1
   connector.
2. USXGMII mode with MAC Ports 1 and 2 of the CPSW9G instance via
   ENET EXPANSION 1 and 2 connectors, configured in fixed-link
   mode of operation at 5Gbps link speed.

This series is based on top of the following series:
https://lore.kernel.org/r/20230425131607.290707-1-j-choudhary@ti.com/

This series also depends on the patch for Serdes Mux Bindings at:
https://lore.kernel.org/r/20230310111630.743023-1-s-vadapalli@ti.com/
for patches 2/3 and 3/3.

Regards,
Siddharth.

---

Siddharth Vadapalli (3):
  arm64: dts: ti: k3-j784s4-main: Add CPSW9G nodes
  arm64: dts: ti: k3-j784s4: Add overlay to enable QSGMII mode with
    CPSW9G
  arm64: dts: ti: k3-j784s4: Add overlay for dual port USXGMII mode

 arch/arm64/boot/dts/ti/Makefile               |   3 +
 .../ti/k3-j784s4-evm-quad-port-eth-exp1.dtso  | 142 ++++++++++++++++++
 .../ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso   |  72 +++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi    | 114 ++++++++++++++
 4 files changed, 331 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-quad-port-eth-exp1.dtso
 create mode 100644 arch/arm64/boot/dts/ti/k3-j784s4-evm-usxgmii-exp1-exp2.dtso