mbox series

[0/4] Add pm8916 VM-BMS and LBC

Message ID 20230728-pm8916-bms-lbc-v1-0-56da32467487@trvn.ru
Headers show
Series Add pm8916 VM-BMS and LBC | expand

Message

Nikita Travkin July 28, 2023, 5:19 p.m. UTC 
This series adds charger and "fuel-gauge" found in Qualcomm pm8916 PMIC.

The LBC - Linear Battery Charger is a simple CC/CV charger, that works
autonomously after the current and voltage limits are set.

The VM-BMS - Voltage Mode BMS is a simple hardware block that provides
average voltage on the battery terminals.

These two hardware blocks are used as the battery charging and
management solution in some old Qualcomm devices.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
Nikita Travkin (4):
      dt-bindings: power: supply: Add pm8916 VM-BMS
      dt-bindings: power: supply: Add pm8916 LBC
      power: supply: Add pm8916 VM-BMS support
      power: supply: Add driver for pm8916 lbc

 .../bindings/power/supply/qcom,pm8916-bms-vm.yaml  |  64 ++++
 .../bindings/power/supply/qcom,pm8916-lbc.yaml     |  93 +++++
 drivers/power/supply/Kconfig                       |  22 ++
 drivers/power/supply/Makefile                      |   2 +
 drivers/power/supply/pm8916_bms_vm.c               | 296 ++++++++++++++++
 drivers/power/supply/pm8916_lbc.c                  | 385 +++++++++++++++++++++
 6 files changed, 862 insertions(+)
---
base-commit: d7b3af5a77e8d8da28f435f313e069aea5bcf172
change-id: 20230727-pm8916-bms-lbc-3f80305326a2

Best regards,