mbox series

[0/5] Add Support for RK3566 Powkiddy RGB30

Message ID 20231013183918.225666-1-macroalpha82@gmail.com
Headers show
Series Add Support for RK3566 Powkiddy RGB30 | expand

Message

Chris Morgan Oct. 13, 2023, 6:39 p.m. UTC
From: Chris Morgan <macromorgan@hotmail.com>

Add support for the Powkiddy RGB30 handheld gaming console.

Chris Morgan (5):
  dt-bindings: vendor-prefixes: document Powkiddy
  dt-bindings: panel: Add Powkiddy RGB30 panel compatible
  drm/panel: st7703: Add Powkiddy RGB30 Panel Support
  dt-bindings: arm64: rockchip: add Powkiddy RGB30
  arm64: dts: rockchip: add support for Powkiddy RGB30

 .../devicetree/bindings/arm/rockchip.yaml     |   5 +
 .../display/panel/rocktech,jh057n00900.yaml   |   2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../dts/rockchip/rk3566-powkiddy-rgb30.dts    | 152 ++++++++++++++++++
 drivers/gpu/drm/panel/panel-sitronix-st7703.c |  89 ++++++++++
 6 files changed, 251 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rgb30.dts

Comments

Guido Günther Oct. 16, 2023, 8:33 a.m. UTC | #1
Hi Chris,
On Fri, Oct 13, 2023 at 01:39:16PM -0500, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> The Powkiddy RGB30 4 inch panel is a 4 inch 720x720 DSI panel used in
> the Powkiddy RGB30 handheld gaming device. Add support for it.
> 
> TODO: The panel seems to not resume properly from suspend. I've
> confirmed on the other ST7703 based devices it works correctly.

Regarding drm-misc-next has improvements regarding this prompted by the
PinePhone. Maybe that fixes suspend for you too?

Cheers,
 -- Guido

> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
>  drivers/gpu/drm/panel/panel-sitronix-st7703.c | 89 +++++++++++++++++++
>  1 file changed, 89 insertions(+)
> 
> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> index 6a3945639535..a9892a4447fb 100644
> --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> @@ -433,6 +433,94 @@ static const struct st7703_panel_desc rg353v2_desc = {
>  	.init_sequence = rg353v2_init_sequence,
>  };
>  
> +static int rgb30panel_init_sequence(struct st7703 *ctx)
> +{
> +	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> +	/* Init sequence extracted from Powkiddy RGB30 BSP kernel. */
> +
> +	/*
> +	 * For some reason this specific panel must be taken out of sleep
> +	 * before the full init sequence, or else it will not display.
> +	 */
> +	mipi_dsi_dcs_exit_sleep_mode(dsi);
> +	msleep(250);
> +
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05, 0xf9,
> +			       0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00,
> +			       0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a, 0x00,
> +			       0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22, 0xf0,
> +			       0x63);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
> +			       0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
> +			       0x00, 0x00, 0x12, 0x70, 0x00);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x46);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x3c, 0x12, 0x30);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
> +			       0x03, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
> +			       0xc0, 0x10);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x36, 0x00, 0x32,
> +			       0x32, 0x77, 0xf1, 0xcc, 0xcc, 0x77, 0x77, 0x33,
> +			       0x33);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x88, 0x88);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x0a, 0x10,
> +			       0x0f, 0xa1, 0x80, 0x12, 0x31, 0x23, 0x47, 0x86,
> +			       0xa1, 0x80, 0x47, 0x08, 0x00, 0x00, 0x0d, 0x00,
> +			       0x00, 0x00, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x00,
> +			       0x48, 0x02, 0x8b, 0xaf, 0x46, 0x02, 0x88, 0x88,
> +			       0x88, 0x88, 0x88, 0x48, 0x13, 0x8b, 0xaf, 0x57,
> +			       0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
> +			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +			       0x00, 0x00, 0x00);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x96, 0x12, 0x01, 0x01,
> +			       0x01, 0x78, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
> +			       0x4f, 0x31, 0x8b, 0xa8, 0x31, 0x75, 0x88, 0x88,
> +			       0x88, 0x88, 0x88, 0x4f, 0x20, 0x8b, 0xa8, 0x20,
> +			       0x64, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
> +			       0x00, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
> +			       0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> +			       0x00, 0x00, 0x40, 0xa1, 0x80, 0x00, 0x00, 0x00,
> +			       0x00);
> +	mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x0a, 0x0f,
> +			       0x29, 0x3b, 0x3f, 0x42, 0x39, 0x06, 0x0d, 0x10,
> +			       0x13, 0x15, 0x14, 0x15, 0x10, 0x17, 0x00, 0x0a,
> +			       0x0f, 0x29, 0x3b, 0x3f, 0x42, 0x39, 0x06, 0x0d,
> +			       0x10, 0x13, 0x15, 0x14, 0x15, 0x10, 0x17);
> +
> +	return 0;
> +}
> +
> +static const struct drm_display_mode rgb30panel_mode = {
> +	.hdisplay	= 720,
> +	.hsync_start	= 720 + 45,
> +	.hsync_end	= 720 + 45 + 4,
> +	.htotal		= 720 + 45 + 4 + 45,
> +	.vdisplay	= 720,
> +	.vsync_start	= 720 + 15,
> +	.vsync_end	= 720 + 15 + 3,
> +	.vtotal		= 720 + 15 + 3 + 11,
> +	.clock		= 36570,
> +	.flags		= DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> +	.width_mm	= 76,
> +	.height_mm	= 76,
> +};
> +
> +static const struct st7703_panel_desc rgb30panel_desc = {
> +	.mode = &rgb30panel_mode,
> +	.lanes = 4,
> +	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> +		      MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
> +	.format = MIPI_DSI_FMT_RGB888,
> +	.init_sequence = rgb30panel_init_sequence,
> +};
> +
>  static int st7703_enable(struct drm_panel *panel)
>  {
>  	struct st7703 *ctx = panel_to_st7703(panel);
> @@ -694,6 +782,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
>  
>  static const struct of_device_id st7703_of_match[] = {
>  	{ .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
> +	{ .compatible = "powkiddy,rgb30-panel", .data = &rgb30panel_desc },
>  	{ .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
>  	{ .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
>  	{ /* sentinel */ }
> -- 
> 2.34.1
>
Krzysztof Kozlowski Oct. 16, 2023, 12:28 p.m. UTC | #2
On 13/10/2023 20:39, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Document Powkiddy (https://powkiddy.com/).
> 
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Chris Morgan Oct. 16, 2023, 3:52 p.m. UTC | #3
Confirmed that those pending patches DO fix the panel suspend issues. Thank you.

On Mon, Oct 16, 2023 at 3:41 AM Guido Günther <guido.gunther@puri.sm> wrote:
>
> Hi Chris,
> On Fri, Oct 13, 2023 at 01:39:16PM -0500, Chris Morgan wrote:
> > From: Chris Morgan <macromorgan@hotmail.com>
> >
> > The Powkiddy RGB30 4 inch panel is a 4 inch 720x720 DSI panel used in
> > the Powkiddy RGB30 handheld gaming device. Add support for it.
> >
> > TODO: The panel seems to not resume properly from suspend. I've
> > confirmed on the other ST7703 based devices it works correctly.
>
> Regarding drm-misc-next has improvements regarding this prompted by the
> PinePhone. Maybe that fixes suspend for you too?
>
> Cheers,
>  -- Guido
>
> >
> > Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> > ---
> >  drivers/gpu/drm/panel/panel-sitronix-st7703.c | 89 +++++++++++++++++++
> >  1 file changed, 89 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> > index 6a3945639535..a9892a4447fb 100644
> > --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> > +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
> > @@ -433,6 +433,94 @@ static const struct st7703_panel_desc rg353v2_desc = {
> >       .init_sequence = rg353v2_init_sequence,
> >  };
> >
> > +static int rgb30panel_init_sequence(struct st7703 *ctx)
> > +{
> > +     struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> > +
> > +     /* Init sequence extracted from Powkiddy RGB30 BSP kernel. */
> > +
> > +     /*
> > +      * For some reason this specific panel must be taken out of sleep
> > +      * before the full init sequence, or else it will not display.
> > +      */
> > +     mipi_dsi_dcs_exit_sleep_mode(dsi);
> > +     msleep(250);
> > +
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05, 0xf9,
> > +                            0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                            0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a, 0x00,
> > +                            0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22, 0xf0,
> > +                            0x63);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
> > +                            0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
> > +                            0x00, 0x00, 0x12, 0x70, 0x00);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x46);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x3c, 0x12, 0x30);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
> > +                            0x03, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
> > +                            0xc0, 0x10);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x36, 0x00, 0x32,
> > +                            0x32, 0x77, 0xf1, 0xcc, 0xcc, 0x77, 0x77, 0x33,
> > +                            0x33);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x88, 0x88);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x0a, 0x10,
> > +                            0x0f, 0xa1, 0x80, 0x12, 0x31, 0x23, 0x47, 0x86,
> > +                            0xa1, 0x80, 0x47, 0x08, 0x00, 0x00, 0x0d, 0x00,
> > +                            0x00, 0x00, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x00,
> > +                            0x48, 0x02, 0x8b, 0xaf, 0x46, 0x02, 0x88, 0x88,
> > +                            0x88, 0x88, 0x88, 0x48, 0x13, 0x8b, 0xaf, 0x57,
> > +                            0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
> > +                            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                            0x00, 0x00, 0x00);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x96, 0x12, 0x01, 0x01,
> > +                            0x01, 0x78, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                            0x4f, 0x31, 0x8b, 0xa8, 0x31, 0x75, 0x88, 0x88,
> > +                            0x88, 0x88, 0x88, 0x4f, 0x20, 0x8b, 0xa8, 0x20,
> > +                            0x64, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
> > +                            0x00, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
> > +                            0x00, 0x00, 0x40, 0xa1, 0x80, 0x00, 0x00, 0x00,
> > +                            0x00);
> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x0a, 0x0f,
> > +                            0x29, 0x3b, 0x3f, 0x42, 0x39, 0x06, 0x0d, 0x10,
> > +                            0x13, 0x15, 0x14, 0x15, 0x10, 0x17, 0x00, 0x0a,
> > +                            0x0f, 0x29, 0x3b, 0x3f, 0x42, 0x39, 0x06, 0x0d,
> > +                            0x10, 0x13, 0x15, 0x14, 0x15, 0x10, 0x17);
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct drm_display_mode rgb30panel_mode = {
> > +     .hdisplay       = 720,
> > +     .hsync_start    = 720 + 45,
> > +     .hsync_end      = 720 + 45 + 4,
> > +     .htotal         = 720 + 45 + 4 + 45,
> > +     .vdisplay       = 720,
> > +     .vsync_start    = 720 + 15,
> > +     .vsync_end      = 720 + 15 + 3,
> > +     .vtotal         = 720 + 15 + 3 + 11,
> > +     .clock          = 36570,
> > +     .flags          = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> > +     .width_mm       = 76,
> > +     .height_mm      = 76,
> > +};
> > +
> > +static const struct st7703_panel_desc rgb30panel_desc = {
> > +     .mode = &rgb30panel_mode,
> > +     .lanes = 4,
> > +     .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> > +                   MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
> > +     .format = MIPI_DSI_FMT_RGB888,
> > +     .init_sequence = rgb30panel_init_sequence,
> > +};
> > +
> >  static int st7703_enable(struct drm_panel *panel)
> >  {
> >       struct st7703 *ctx = panel_to_st7703(panel);
> > @@ -694,6 +782,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
> >
> >  static const struct of_device_id st7703_of_match[] = {
> >       { .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
> > +     { .compatible = "powkiddy,rgb30-panel", .data = &rgb30panel_desc },
> >       { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
> >       { .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
> >       { /* sentinel */ }
> > --
> > 2.34.1
> >
>
Dragan Simic Oct. 16, 2023, 4:07 p.m. UTC | #4
On 2023-10-16 17:52, Chris Morgan wrote:
> Confirmed that those pending patches DO fix the panel suspend issues. 
> Thank you.

Awesome, that's great to hear!  Perhaps a "Tested-by" in the original 
LKML thread [1] could help with having the patch pulled sooner.

Links:
[1] 
https://lore.kernel.org/lkml/33b72957-1062-1b66-85eb-c37dc5ca259b@redhat.com/T/


> On Mon, Oct 16, 2023 at 3:41 AM Guido Günther <guido.gunther@puri.sm> 
> wrote:
>> 
>> Hi Chris,
>> On Fri, Oct 13, 2023 at 01:39:16PM -0500, Chris Morgan wrote:
>> > From: Chris Morgan <macromorgan@hotmail.com>
>> >
>> > The Powkiddy RGB30 4 inch panel is a 4 inch 720x720 DSI panel used in
>> > the Powkiddy RGB30 handheld gaming device. Add support for it.
>> >
>> > TODO: The panel seems to not resume properly from suspend. I've
>> > confirmed on the other ST7703 based devices it works correctly.
>> 
>> Regarding drm-misc-next has improvements regarding this prompted by 
>> the
>> PinePhone. Maybe that fixes suspend for you too?
>> 
>> Cheers,
>>  -- Guido
>> 
>> >
>> > Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
>> > ---
>> >  drivers/gpu/drm/panel/panel-sitronix-st7703.c | 89 +++++++++++++++++++
>> >  1 file changed, 89 insertions(+)
>> >
>> > diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
>> > index 6a3945639535..a9892a4447fb 100644
>> > --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
>> > +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
>> > @@ -433,6 +433,94 @@ static const struct st7703_panel_desc rg353v2_desc = {
>> >       .init_sequence = rg353v2_init_sequence,
>> >  };
>> >
>> > +static int rgb30panel_init_sequence(struct st7703 *ctx)
>> > +{
>> > +     struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
>> > +
>> > +     /* Init sequence extracted from Powkiddy RGB30 BSP kernel. */
>> > +
>> > +     /*
>> > +      * For some reason this specific panel must be taken out of sleep
>> > +      * before the full init sequence, or else it will not display.
>> > +      */
>> > +     mipi_dsi_dcs_exit_sleep_mode(dsi);
>> > +     msleep(250);
>> > +
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05, 0xf9,
>> > +                            0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00,
>> > +                            0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a, 0x00,
>> > +                            0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22, 0xf0,
>> > +                            0x63);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28,
>> > +                            0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50,
>> > +                            0x00, 0x00, 0x12, 0x70, 0x00);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x46);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x3c, 0x12, 0x30);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b,
>> > +                            0x03, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00,
>> > +                            0xc0, 0x10);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x36, 0x00, 0x32,
>> > +                            0x32, 0x77, 0xf1, 0xcc, 0xcc, 0x77, 0x77, 0x33,
>> > +                            0x33);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x88, 0x88);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x0a, 0x10,
>> > +                            0x0f, 0xa1, 0x80, 0x12, 0x31, 0x23, 0x47, 0x86,
>> > +                            0xa1, 0x80, 0x47, 0x08, 0x00, 0x00, 0x0d, 0x00,
>> > +                            0x00, 0x00, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x00,
>> > +                            0x48, 0x02, 0x8b, 0xaf, 0x46, 0x02, 0x88, 0x88,
>> > +                            0x88, 0x88, 0x88, 0x48, 0x13, 0x8b, 0xaf, 0x57,
>> > +                            0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00,
>> > +                            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> > +                            0x00, 0x00, 0x00);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x96, 0x12, 0x01, 0x01,
>> > +                            0x01, 0x78, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
>> > +                            0x4f, 0x31, 0x8b, 0xa8, 0x31, 0x75, 0x88, 0x88,
>> > +                            0x88, 0x88, 0x88, 0x4f, 0x20, 0x8b, 0xa8, 0x20,
>> > +                            0x64, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00,
>> > +                            0x00, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
>> > +                            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
>> > +                            0x00, 0x00, 0x40, 0xa1, 0x80, 0x00, 0x00, 0x00,
>> > +                            0x00);
>> > +     mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x0a, 0x0f,
>> > +                            0x29, 0x3b, 0x3f, 0x42, 0x39, 0x06, 0x0d, 0x10,
>> > +                            0x13, 0x15, 0x14, 0x15, 0x10, 0x17, 0x00, 0x0a,
>> > +                            0x0f, 0x29, 0x3b, 0x3f, 0x42, 0x39, 0x06, 0x0d,
>> > +                            0x10, 0x13, 0x15, 0x14, 0x15, 0x10, 0x17);
>> > +
>> > +     return 0;
>> > +}
>> > +
>> > +static const struct drm_display_mode rgb30panel_mode = {
>> > +     .hdisplay       = 720,
>> > +     .hsync_start    = 720 + 45,
>> > +     .hsync_end      = 720 + 45 + 4,
>> > +     .htotal         = 720 + 45 + 4 + 45,
>> > +     .vdisplay       = 720,
>> > +     .vsync_start    = 720 + 15,
>> > +     .vsync_end      = 720 + 15 + 3,
>> > +     .vtotal         = 720 + 15 + 3 + 11,
>> > +     .clock          = 36570,
>> > +     .flags          = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
>> > +     .width_mm       = 76,
>> > +     .height_mm      = 76,
>> > +};
>> > +
>> > +static const struct st7703_panel_desc rgb30panel_desc = {
>> > +     .mode = &rgb30panel_mode,
>> > +     .lanes = 4,
>> > +     .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
>> > +                   MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM,
>> > +     .format = MIPI_DSI_FMT_RGB888,
>> > +     .init_sequence = rgb30panel_init_sequence,
>> > +};
>> > +
>> >  static int st7703_enable(struct drm_panel *panel)
>> >  {
>> >       struct st7703 *ctx = panel_to_st7703(panel);
>> > @@ -694,6 +782,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi)
>> >
>> >  static const struct of_device_id st7703_of_match[] = {
>> >       { .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc },
>> > +     { .compatible = "powkiddy,rgb30-panel", .data = &rgb30panel_desc },
>> >       { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc },
>> >       { .compatible = "xingbangda,xbd599", .data = &xbd599_desc },
>> >       { /* sentinel */ }
>> > --
>> > 2.34.1
>> >
>> 
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
Heiko Stübner Oct. 16, 2023, 6:18 p.m. UTC | #5
Hi,

Am Montag, 16. Oktober 2023, 18:07:52 CEST schrieb Dragan Simic:
> On 2023-10-16 17:52, Chris Morgan wrote:
> > Confirmed that those pending patches DO fix the panel suspend issues. 
> > Thank you.
> 
> Awesome, that's great to hear!  Perhaps a "Tested-by" in the original 
> LKML thread [1] could help with having the patch pulled sooner.
> 
> Links:
> [1] 
> https://lore.kernel.org/lkml/33b72957-1062-1b66-85eb-c37dc5ca259b@redhat.com/T/
> 
> 
> > On Mon, Oct 16, 2023 at 3:41 AM Guido Günther <guido.gunther@puri.sm> 
> > wrote:
> >> 
> >> Hi Chris,
> >> On Fri, Oct 13, 2023 at 01:39:16PM -0500, Chris Morgan wrote:
> >> > From: Chris Morgan <macromorgan@hotmail.com>
> >> >
> >> > The Powkiddy RGB30 4 inch panel is a 4 inch 720x720 DSI panel used in
> >> > the Powkiddy RGB30 handheld gaming device. Add support for it.
> >> >
> >> > TODO: The panel seems to not resume properly from suspend. I've
> >> > confirmed on the other ST7703 based devices it works correctly.

so this TODO item could go away, right?
I can remove it when applying the patch, just want to make sure
all review comments are addressed - only the suspend thing it seems.


Thanks
Heiko
Chris Morgan Oct. 16, 2023, 6:26 p.m. UTC | #6
On Mon, Oct 16, 2023 at 08:18:25PM +0200, Heiko Stübner wrote:
> Hi,
> 
> Am Montag, 16. Oktober 2023, 18:07:52 CEST schrieb Dragan Simic:
> > On 2023-10-16 17:52, Chris Morgan wrote:
> > > Confirmed that those pending patches DO fix the panel suspend issues. 
> > > Thank you.
> > 
> > Awesome, that's great to hear!  Perhaps a "Tested-by" in the original 
> > LKML thread [1] could help with having the patch pulled sooner.
> > 
> > Links:
> > [1] 
> > https://lore.kernel.org/lkml/33b72957-1062-1b66-85eb-c37dc5ca259b@redhat.com/T/
> > 
> > 
> > > On Mon, Oct 16, 2023 at 3:41 AM Guido Günther <guido.gunther@puri.sm> 
> > > wrote:
> > >> 
> > >> Hi Chris,
> > >> On Fri, Oct 13, 2023 at 01:39:16PM -0500, Chris Morgan wrote:
> > >> > From: Chris Morgan <macromorgan@hotmail.com>
> > >> >
> > >> > The Powkiddy RGB30 4 inch panel is a 4 inch 720x720 DSI panel used in
> > >> > the Powkiddy RGB30 handheld gaming device. Add support for it.
> > >> >
> > >> > TODO: The panel seems to not resume properly from suspend. I've
> > >> > confirmed on the other ST7703 based devices it works correctly.
> 
> so this TODO item could go away, right?
> I can remove it when applying the patch, just want to make sure
> all review comments are addressed - only the suspend thing it seems.

That is correct, but let me send a v2 of this instead. I'll remove this
verbiage among other fixes. End users wanted me to see if I could get
this panel to run at precisely 60hz, which I believe I am able to do
with the addition of a new PLL clock in clk_rk3568. I believe I have
taken every constraint detailed in the datasheet to heart for the new
frequency I'll be requesting. By using the frequency of 292500000 for
the VPLL I can get the panel running at 59.969hz which in my view is
close enough to the ideal 59.98hz.

I also accidentally left the UART2 active even though this device has
no exposed UART port, so I need to fix that too by disabling it.

Lastly I'll add my tested by to the dri-devel patches as well.

Thank you,
Chris

> 
> 
> Thanks
> Heiko
> 
>
Heiko Stübner Oct. 16, 2023, 8:58 p.m. UTC | #7
On Fri, 13 Oct 2023 13:39:13 -0500, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Powkiddy RGB30 handheld gaming console.
> 
> Chris Morgan (5):
>   dt-bindings: vendor-prefixes: document Powkiddy
>   dt-bindings: panel: Add Powkiddy RGB30 panel compatible
>   drm/panel: st7703: Add Powkiddy RGB30 Panel Support
>   dt-bindings: arm64: rockchip: add Powkiddy RGB30
>   arm64: dts: rockchip: add support for Powkiddy RGB30
> 
> [...]

Applied, thanks!

[1/5] dt-bindings: vendor-prefixes: document Powkiddy
      commit: 00e395c8edf7fb6fa0830125d91c2b4bc381eefd
[2/5] dt-bindings: panel: Add Powkiddy RGB30 panel compatible
      commit: daee0320a13724e5a584726b693eee87bbd96172
[3/5] drm/panel: st7703: Add Powkiddy RGB30 Panel Support
      commit: 636a989eb4d022e1756009592445aedaaf7424d8

Best regards,
Heiko Stübner Oct. 16, 2023, 9:02 p.m. UTC | #8
On Fri, 13 Oct 2023 13:39:13 -0500, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
> 
> Add support for the Powkiddy RGB30 handheld gaming console.
> 
> Chris Morgan (5):
>   dt-bindings: vendor-prefixes: document Powkiddy
>   dt-bindings: panel: Add Powkiddy RGB30 panel compatible
>   drm/panel: st7703: Add Powkiddy RGB30 Panel Support
>   dt-bindings: arm64: rockchip: add Powkiddy RGB30
>   arm64: dts: rockchip: add support for Powkiddy RGB30
> 
> [...]

Applied, thanks!

[4/5] dt-bindings: arm64: rockchip: add Powkiddy RGB30
      commit: 64d0de4f65c2951ccdc7a7aebe8a7e3455946f5f
[5/5] arm64: dts: rockchip: add support for Powkiddy RGB30
      commit: 1e9ac3e8a6a9d4da9efbad2d8e95cc1140e0e23f

Best regards,