mbox series

[v7,0/3] Add support for qcm6490 idp and qcs6490 rb3gen2 board

Message ID 20231129065816.26409-1-quic_kbajaj@quicinc.com
Headers show
Series Add support for qcm6490 idp and qcs6490 rb3gen2 board | expand

Message

Komal Bajaj Nov. 29, 2023, 6:58 a.m. UTC 
This series adds the dt-binding and base devicetree files for
QCM6490 IDP based off QCM6490 SoC derived from SC7280 meant for
various form factor including IoT and QCS6490 RB3Gen2 based
off QCS6490 SoC derivative of QCM6490 without internal modem.
See more at:
https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/qcs-qcm6490-soc-product-brief_87-28733-1-b.pdf

----
Changes from v6:
* Add chassis-type in qcm6490-idp.dts as suggested by Caleb
* Added reviewed tag by Caleb in p2 and p3
* Link to v6: https://lore.kernel.org/linux-arm-msm/20231124121305.1954-1-quic_kbajaj@quicinc.com/

Changes from v5:
* Added vph-pwr-regulator node and regulator supply
* Added the voltage range for ldo7 and ldo9 and removed regulator allowed modes for rb3gen2 board
* Link to v5: https://lore.kernel.org/linux-arm-msm/20231120134754.9526-1-quic_kbajaj@quicinc.com/

Changes from v4:
* Described the usecases for gpio-reserved-ranges
* Added reviewed tag by Konrad in p2 and p3
* Link to v4: https://lore.kernel.org/linux-arm-msm/20231117125056.32503-1-quic_kbajaj@quicinc.com/

Changes from v3:
* Removed qcm6490.dtsi file and moved all the contents to board file instead
* Introducing QCS6490-RB3Gen2 board
* Link to v3: https://lore.kernel.org/linux-arm-msm/20231003175456.14774-1-quic_kbajaj@quicinc.com/

Changes from v2:
* Sorted nodes alphabetically
* Link to v2: https://lore.kernel.org/all/20231003055655.30994-1-quic_kbajaj@quicinc.com/

Changes from v1:
* Dropped suffix platform from model name
* Removed few nodes as they were identical to ones in sc7280
* Specified regulator-initial-mode property to vregs
* Dropped deletion of lpass and swr nodes
* Link to v1: https://lore.kernel.org/lkml/20230928133312.11371-1-quic_kbajaj@quicinc.com/

Komal Bajaj (3):
  dt-bindings: arm: qcom: Add QCM6490 IDP and QCS6490 RB3Gen2 board
  arm64: dts: qcom: Add base qcm6490 idp board dts
  arm64: dts: qcom: Add base qcs6490-rb3gen2 board dts

 .../devicetree/bindings/arm/qcom.yaml         |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   2 +
 arch/arm64/boot/dts/qcom/qcm6490-idp.dts      | 465 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts  | 452 +++++++++++++++++
 4 files changed, 921 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcm6490-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts

--
2.42.0