mbox series

[RFC,v1,0/4] Rework realtek-rtl IRQ driver

Message ID cover.1640261161.git.sander@svanheule.net
Headers show
Series Rework realtek-rtl IRQ driver | expand

Message

Sander Vanheule Dec. 23, 2021, 12:08 p.m. UTC 
After seeing some use and with more devices tested, the current implementation
for the Realtek SoC interrupt controller was found to contain a few flaws.

The driver requires the following fixes:
- irq_domain_ops::map should map the virq, not the hwirq
- routing has an off-by-one error. Values (1..6) correspond to MIPS CAUSEF(2..7)

The following improvements should also be made:
- Use N real cascaded interrupts with an interrupt-specific mask of child irq lines.
  Otherwise a high-priority interrupt may cause a low-priority interrupt to be
  handled first.
- Get rid of custom interrupt-map interpretation, replace by realtek,interrupt-routing.

These patches are some initial changes, and since is this my first real work on
an interrupt driver, I'm submitting this as an RFC first. Please see the notes
on the patches for some extra remarks.

I've also currently opted to stay with cascased interrupts, as I'm not
sure if (and how) this should be implemented as a hierarchical
controller.

Best,
Sander

Sander Vanheule (4):
  irqchip: realtek-rtl: map control data to virq
  irqchip: realtek-rtl: use per-parent irq handling
  dt-bindings: interrupt-controller: realtek,rtl-intc: replace irq
    mapping
  irqchip: realtek-rtl: replace custom interrupt-map

 .../realtek,rtl-intc.yaml                     |  49 +++--
 drivers/irqchip/irq-realtek-rtl.c             | 202 +++++++++++-------
 2 files changed, 163 insertions(+), 88 deletions(-)