mbox series

[v6,00/10,RESEND] Add RT5033 charger device driver

Message ID cover.1684182964.git.jahau@rocketmail.com
Headers show
Series Add RT5033 charger device driver | expand

Message

Jakob Hauser May 15, 2023, 8:57 p.m. UTC 
This patchset adds the charger driver "rt5033-charger". It is part of the
multifunction device rt5033. The patchset is based on an older version by
Beomho Seo of March 2015. For more information on the history and setup of
the patchset see the cover sheet of version v1, there is a link further down
below the changelog.

RESEND: Sorry for spamming. The first try of sending v6 got interrupted and
was split into two threads on the lore list. Therefore sending it again.

Changes in v6:
 - Patch 5: In function rt5033_charger_probe() after
   calling rt5033_charger_dt_init() replaced the return value from "-ENODEV"
   to "PTR_ERR(charger->chg)", as suggested by Christophe.
 - Patch 9: Changed the patch from adding "power-supplies: true" to replacing
   "additionalProperties: false" by "unevaluatedProperties: false", as
   suggested by Krzysztof.

v1: https://lore.kernel.org/linux-pm/cover.1677620677.git.jahau@rocketmail.com/T/#t
v2: https://lore.kernel.org/linux-pm/cover.1681646904.git.jahau@rocketmail.com/T/#t
v3: https://lore.kernel.org/linux-pm/cover.1682636929.git.jahau@rocketmail.com/T/#t
v4: https://lore.kernel.org/linux-pm/20230506155435.3005-1-jahau@rocketmail.com/T/#t
v5: https://lore.kernel.org/linux-pm/20230514123130.41172-1-jahau@rocketmail.com/T/#t

The result of the patchset v6 can be seen at:
https://github.com/Jakko3/linux/blob/rt5033-charger_v6/drivers/power/supply/rt5033_charger.c

Jakob Hauser (9):
  mfd: rt5033: Fix chip revision readout
  mfd: rt5033: Fix STAT_MASK, HZ_MASK and AICR defines
  mfd: rt5033: Apply preparatory changes before adding rt5033-charger
    driver
  power: supply: rt5033_charger: Add RT5033 charger device driver
  power: supply: rt5033_charger: Add cable detection and USB OTG supply
  power: supply: rt5033_battery: Move struct rt5033_battery to battery
    driver
  power: supply: rt5033_battery: Adopt status property from charger
  dt-bindings: power: supply: rt5033-battery: Apply
    unevaluatedProperties
  dt-bindings: Add rt5033 mfd, regulator and charger

Stephan Gerhold (1):
  mfd: rt5033: Drop rt5033-battery sub-device

 .../bindings/mfd/richtek,rt5033.yaml          | 138 ++++
 .../power/supply/richtek,rt5033-battery.yaml  |   2 +-
 .../power/supply/richtek,rt5033-charger.yaml  |  65 ++
 drivers/mfd/rt5033.c                          |   8 +-
 drivers/power/supply/Kconfig                  |   8 +
 drivers/power/supply/Makefile                 |   1 +
 drivers/power/supply/rt5033_battery.c         |  38 +-
 drivers/power/supply/rt5033_charger.c         | 744 ++++++++++++++++++
 include/linux/mfd/rt5033-private.h            |  64 +-
 include/linux/mfd/rt5033.h                    |  24 -
 10 files changed, 1034 insertions(+), 58 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
 create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
 create mode 100644 drivers/power/supply/rt5033_charger.c

Comments

Lee Jones June 1, 2023, 2 p.m. UTC | #1 
On Wed, 31 May 2023, Jakob Hauser wrote:

> Dear all,
> 
> On 15.05.23 22:57, Jakob Hauser wrote:
> > This patchset adds the charger driver "rt5033-charger". It is part of the
> > multifunction device rt5033. The patchset is based on an older version by
> > Beomho Seo of March 2015. For more information on the history and setup of
> > the patchset see the cover sheet of version v1, there is a link further down
> > below the changelog.
> > 
> > RESEND: Sorry for spamming. The first try of sending v6 got interrupted and
> > was split into two threads on the lore list. Therefore sending it again.
> > 
> > Changes in v6:
> >   - Patch 5: In function rt5033_charger_probe() after
> >     calling rt5033_charger_dt_init() replaced the return value from "-ENODEV"
> >     to "PTR_ERR(charger->chg)", as suggested by Christophe.
> >   - Patch 9: Changed the patch from adding "power-supplies: true" to replacing
> >     "additionalProperties: false" by "unevaluatedProperties: false", as
> >     suggested by Krzysztof.
> > 
> > v1: https://lore.kernel.org/linux-pm/cover.1677620677.git.jahau@rocketmail.com/T/#t
> > v2: https://lore.kernel.org/linux-pm/cover.1681646904.git.jahau@rocketmail.com/T/#t
> > v3: https://lore.kernel.org/linux-pm/cover.1682636929.git.jahau@rocketmail.com/T/#t
> > v4: https://lore.kernel.org/linux-pm/20230506155435.3005-1-jahau@rocketmail.com/T/#t
> > v5: https://lore.kernel.org/linux-pm/20230514123130.41172-1-jahau@rocketmail.com/T/#t
> > 
> > The result of the patchset v6 can be seen at:
> > https://github.com/Jakko3/linux/blob/rt5033-charger_v6/drivers/power/supply/rt5033_charger.c
> 
> What's missing on this patchset? I'm not familiar with the procedures. If
> all patches need ack's, then the ones for mfd (patches 2 & 4) and for
> dt-bindings (patch 10) are missing.

You're waiting on me.  I will apply all of the patches and submit a PR.

You're in the queue - please stand-by.
 
> Link to the current patchset v6:
> - on lore: https://lore.kernel.org/linux-pm/cover.1684182964.git.jahau@rocketmail.com/T/#t
> - on patchwork: https://patchwork.kernel.org/project/linux-pm/list/?series=747771&state=%2A&archive=both
> 
> > Jakob Hauser (9):
> >    mfd: rt5033: Fix chip revision readout
> >    mfd: rt5033: Fix STAT_MASK, HZ_MASK and AICR defines
> >    mfd: rt5033: Apply preparatory changes before adding rt5033-charger
> >      driver
> >    power: supply: rt5033_charger: Add RT5033 charger device driver
> >    power: supply: rt5033_charger: Add cable detection and USB OTG supply
> >    power: supply: rt5033_battery: Move struct rt5033_battery to battery
> >      driver
> >    power: supply: rt5033_battery: Adopt status property from charger
> >    dt-bindings: power: supply: rt5033-battery: Apply
> >      unevaluatedProperties
> >    dt-bindings: Add rt5033 mfd, regulator and charger
> > 
> > Stephan Gerhold (1):
> >    mfd: rt5033: Drop rt5033-battery sub-device
> > 
> >   .../bindings/mfd/richtek,rt5033.yaml          | 138 ++++
> >   .../power/supply/richtek,rt5033-battery.yaml  |   2 +-
> >   .../power/supply/richtek,rt5033-charger.yaml  |  65 ++
> >   drivers/mfd/rt5033.c                          |   8 +-
> >   drivers/power/supply/Kconfig                  |   8 +
> >   drivers/power/supply/Makefile                 |   1 +
> >   drivers/power/supply/rt5033_battery.c         |  38 +-
> >   drivers/power/supply/rt5033_charger.c         | 744 ++++++++++++++++++
> >   include/linux/mfd/rt5033-private.h            |  64 +-
> >   include/linux/mfd/rt5033.h                    |  24 -
> >   10 files changed, 1034 insertions(+), 58 deletions(-)
> >   create mode 100644 Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
> >   create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
> >   create mode 100644 drivers/power/supply/rt5033_charger.c
> 
> Kind regards,
> Jakob