Show patches with: Submitter = Christian Marangi       |    Archived = No       |   488 patches
« 1 2 3 4 … 4 5 »
Patch Series S/W/F Date Submitter Delegate State
[net-next,v2,2/3] net: mdio: ipq4019: add support for clock-frequency property net: mdio-ipq4019: fix wrong default MDC rate --- 2024-01-30 Christian Marangi Accepted
[net-next,v10,5/5] net: phy: at803x: add LED support for qca808x [net-next,v10,1/5] dt-bindings: net: phy: Make LED active-low property common --- 2024-01-25 Christian Marangi Accepted
[net-next,v10,3/5] net: phy: add support for PHY LEDs polarity modes [net-next,v10,1/5] dt-bindings: net: phy: Make LED active-low property common --- 2024-01-25 Christian Marangi Accepted
[net-next,v10,1/5] dt-bindings: net: phy: Make LED active-low property common [net-next,v10,1/5] dt-bindings: net: phy: Make LED active-low property common --- 2024-01-25 Christian Marangi Accepted
[net-next,2/3] net: mdio: ipq4019: add support for clock-frequency property net: mdio-ipq4019: fix wrong default MDC rate --- 2024-01-24 Christian Marangi New
[net-next,v9,5/5] net: phy: at803x: add LED support for qca808x net: phy: generic polarity + LED support for qca808x --- 2024-01-05 Christian Marangi Superseded
[net-next,v9,4/5] dt-bindings: net: Document QCA808x PHYs net: phy: generic polarity + LED support for qca808x --- 2024-01-05 Christian Marangi Superseded
[net-next,v9,3/5] net: phy: add support for PHY LEDs polarity modes net: phy: generic polarity + LED support for qca808x --- 2024-01-05 Christian Marangi Superseded
[net-next,v9,2/5] dt-bindings: net: phy: Document LED inactive high impedance mode net: phy: generic polarity + LED support for qca808x --- 2024-01-05 Christian Marangi Superseded
[net-next,v9,1/5] dt-bindings: net: phy: Make LED active-low property common net: phy: generic polarity + LED support for qca808x --- 2024-01-05 Christian Marangi Superseded
[net-next,v8,5/5] net: phy: at803x: add LED support for qca808x net: phy: generic polarity + LED support for qca808x --- 2024-01-04 Christian Marangi Superseded
[net-next,v8,4/5] dt-bindings: net: Document QCA808x PHYs net: phy: generic polarity + LED support for qca808x --- 2024-01-04 Christian Marangi Superseded
[net-next,v8,3/5] net: phy: add support for PHY LEDs polarity modes net: phy: generic polarity + LED support for qca808x --- 2024-01-04 Christian Marangi Superseded
[net-next,v8,2/5] dt-bindings: net: phy: Document LED inactive high impedance mode net: phy: generic polarity + LED support for qca808x --- 2024-01-04 Christian Marangi Superseded
[net-next,v8,1/5] dt-bindings: net: phy: Make LED active-low property common net: phy: generic polarity + LED support for qca808x --- 2024-01-04 Christian Marangi Superseded
[net-next,v7,4/5] dt-bindings: net: Document QCA808x PHYs net: phy: generic polarity + LED support for qca808x --- 2024-01-03 Christian Marangi Superseded
[net-next,v7,2/5] dt-bindings: net: phy: Document LED inactive high impedance mode net: phy: generic polarity + LED support for qca808x --- 2024-01-03 Christian Marangi Superseded
[net-next,v6,5/5] net: phy: at803x: add LED support for qca808x [net-next,v6,1/5] dt-bindings: net: phy: Make LED active-low property common --- 2024-01-02 Christian Marangi Superseded
[net-next,v6,3/5] net: phy: add support for PHY LEDs polarity modes [net-next,v6,1/5] dt-bindings: net: phy: Make LED active-low property common --- 2024-01-02 Christian Marangi Superseded
[net-next,v6,1/5] dt-bindings: net: phy: Make LED active-low property common [net-next,v6,1/5] dt-bindings: net: phy: Make LED active-low property common --- 2024-01-02 Christian Marangi Superseded
[net-next,v5,4/5] dt-bindings: net: Document QCA808x PHYs net: phy: generic polarity + LED support for qca808x --- 2023-12-27 Christian Marangi Superseded
[net-next,v5,2/5] dt-bindings: net: phy: Document LED inactive high impedance mode net: phy: generic polarity + LED support for qca808x --- 2023-12-27 Christian Marangi Superseded
[net-next,v4,4/4] net: phy: at803x: add LED support for qca808x net: phy: generic polarity + LED support for qca808x --- 2023-12-15 Christian Marangi New
[net-next,v4,3/4] dt-bindings: net: Document QCA808x PHYs net: phy: generic polarity + LED support for qca808x --- 2023-12-15 Christian Marangi Superseded
[net-next,v4,2/4] net: phy: add support for PHY LEDs polarity modes net: phy: generic polarity + LED support for qca808x --- 2023-12-15 Christian Marangi New
[net-next,v4,1/4] dt-bindings: net: phy: Document new LEDs polarity property net: phy: generic polarity + LED support for qca808x --- 2023-12-15 Christian Marangi New
[net-next,RFC,v2,4/4] net: phy: at803x: add LED support for qca808x Untitled series #229863 --- 2023-12-11 Christian Marangi Superseded
[net-next,RFC,v2,2/4] net: phy: add support for PHY LEDs active-low Untitled series #229863 --- 2023-12-11 Christian Marangi New
[net-next,1/2] dt-bindings: Document QCA808x PHYs [net-next,1/2] dt-bindings: Document QCA808x PHYs --- 2023-12-09 Christian Marangi New
[net-next,RFC,v3,7/8] net: phy: add Qualcom QCA807x driver net: phy: Support DT PHY package --- 2023-11-26 Christian Marangi New
[net-next,RFC,v3,6/8] dt-bindings: net: Document Qcom QCA807x PHY package net: phy: Support DT PHY package --- 2023-11-26 Christian Marangi New
[net-next,RFC,v3,4/8] net: phy: add support for driver specific PHY package probe/config net: phy: Support DT PHY package --- 2023-11-26 Christian Marangi New
[net-next,RFC,v3,2/8] net: phy: add initial support for PHY package in DT net: phy: Support DT PHY package --- 2023-11-26 Christian Marangi New
[net-next,RFC,v2,11/11] net: phy: qca807x: Add support for configurable LED Untitled series #228306 --- 2023-11-25 Christian Marangi New
[net-next,RFC,v2,09/11] dt-bindings: net: Document Qcom QCA807x PHY package Untitled series #228306 --- 2023-11-25 Christian Marangi New
[net-next,RFC,v2,07/11] net: phy: add support for PHY package MMD read/write Untitled series #228306 --- 2023-11-25 Christian Marangi New
[net-next,RFC,v2,06/11] net: phy: move mmd_phy_indirect to generic header Untitled series #228306 --- 2023-11-25 Christian Marangi New
[net-next,RFC,v2,03/11] net: phy: add initial support for PHY package in DT Untitled series #228306 --- 2023-11-25 Christian Marangi New
[net-next,RFC,v2,02/11] dt-bindings: net: document ethernet PHY package nodes Untitled series #228306 --- 2023-11-25 Christian Marangi New
[net-next,v8,4/4] dt-bindings: Document Marvell Aquantia PHY [net-next,v8,1/4] net: phy: aquantia: move to separate directory --- 2023-11-14 Christian Marangi Accepted
[net-next,v8,3/4] net: phy: aquantia: add firmware load support [net-next,v8,1/4] net: phy: aquantia: move to separate directory --- 2023-11-14 Christian Marangi New
[net-next,v8,2/4] net: phy: aquantia: move MMD_VEND define to header [net-next,v8,1/4] net: phy: aquantia: move to separate directory --- 2023-11-14 Christian Marangi Accepted
[net-next,v8,1/4] net: phy: aquantia: move to separate directory [net-next,v8,1/4] net: phy: aquantia: move to separate directory --- 2023-11-14 Christian Marangi Accepted
[net-next,RFC,v7,4/4] dt-bindings: Document Marvell Aquantia PHY [net-next,RFC,v7,1/4] net: phy: aquantia: move to separate directory --- 2023-11-13 Christian Marangi Superseded
[net-next,RFC,v7,1/4] net: phy: aquantia: move to separate directory [net-next,RFC,v7,1/4] net: phy: aquantia: move to separate directory --- 2023-11-13 Christian Marangi Superseded
[net-next,RFC,v6,4/4] dt-bindings: Document Marvell Aquantia PHY Untitled series #226946 --- 2023-11-09 Christian Marangi Superseded
[net-next,RFC,v6,2/4] net: phy: aquantia: move MMD_VEND define to header Untitled series #226946 --- 2023-11-09 Christian Marangi Superseded
[net-next,RFC,v5,4/4] dt-bindings: Document bindings for Marvell Aquantia PHY [net-next,RFC,v5,1/4] net: phy: aquantia: move to separate directory --- 2023-11-06 Christian Marangi Superseded
[net-next,RFC,v5,3/4] net: phy: aquantia: add firmware load support [net-next,RFC,v5,1/4] net: phy: aquantia: move to separate directory --- 2023-11-06 Christian Marangi Superseded
[net-next,RFC,v5,2/4] net: phy: aquantia: move MMD_VEND define to header [net-next,RFC,v5,1/4] net: phy: aquantia: move to separate directory --- 2023-11-06 Christian Marangi Superseded
[net-next,RFC,v5,1/4] net: phy: aquantia: move to separate directory [net-next,RFC,v5,1/4] net: phy: aquantia: move to separate directory --- 2023-11-06 Christian Marangi Superseded
[net-next,RFC,v4,2/4] net: phy: aquantia: move MMD_VEND define to header [net-next,RFC,v4,1/4] net: phy: aquantia: move to separate directory --- 2023-11-03 Christian Marangi Superseded
[net-next,RFC,v4,1/4] net: phy: aquantia: move to separate directory [net-next,RFC,v4,1/4] net: phy: aquantia: move to separate directory --- 2023-11-03 Christian Marangi Superseded
[net-next,RFC,v3,4/4] dt-bindings: Document bindings for Marvell Aquantia PHY Untitled series #226281 --- 2023-11-02 Christian Marangi Superseded
[net-next,RFC,v3,2/4] net: phy: aquantia: move MMD_VEND define to header Untitled series #226281 --- 2023-11-02 Christian Marangi Superseded
[net-next,v2,1/2] net: phy: aquantia: add firmware load support [net-next,v2,1/2] net: phy: aquantia: add firmware load support --- 2023-11-01 Christian Marangi New
[v7,4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table cpufreq: qcom-nvmem: add support for ipq806x --- 2023-10-19 Christian Marangi New
[v7,2/4] cpufreq: qcom-nvmem: also accept operating-points-v2-krait-cpu cpufreq: qcom-nvmem: add support for ipq806x --- 2023-10-19 Christian Marangi New
[v6,4/4] ARM: dts: qcom: ipq8064: Add CPU OPP table cpufreq: qcom-nvmem: add support for ipq806x --- 2023-10-13 Christian Marangi Superseded
[v6,3/4] cpufreq: qcom-nvmem: add support for IPQ8064 cpufreq: qcom-nvmem: add support for ipq806x --- 2023-10-13 Christian Marangi New
[v6,2/4] dt-bindings: opp: opp-v2-kryo-cpu: Document named opp-microvolt property cpufreq: qcom-nvmem: add support for ipq806x --- 2023-10-13 Christian Marangi Accepted
[v6,1/4] dt-bindings: cpufreq: qcom-cpufreq-nvmem: Document krait-cpu cpufreq: qcom-nvmem: add support for ipq806x --- 2023-10-13 Christian Marangi Accepted
[3/3] nvmem: u-boot-env: Handle "reduced" ASCII address declaration [1/3] dt-bindings: nvmem: u-boot,env: Add support for u-boot,env-size --- 2023-07-24 Christian Marangi New
[2/3] nvmem: u-boot-env: Permit to declare custom env-size [1/3] dt-bindings: nvmem: u-boot,env: Add support for u-boot,env-size --- 2023-07-24 Christian Marangi New
[1/3] dt-bindings: nvmem: u-boot,env: Add support for u-boot,env-size [1/3] dt-bindings: nvmem: u-boot,env: Add support for u-boot,env-size --- 2023-07-24 Christian Marangi New
ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2 ARM: dts: BCM5301X: Extend RAM to full 256MB for Linksys EA6500 V2 --- 2023-07-12 Christian Marangi New
[net-next,v7,16/16] Documentation: LEDs: Describe good names for network LEDs net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi New
[net-next,v7,15/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi New
[net-next,v7,14/16] dt-bindings: net: phy: Document support for LEDs node net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi Accepted
[net-next,v7,13/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi Accepted
[net-next,v7,12/16] ARM: dts: qcom: ipq8064-rb3011: Drop unevaluated properties in switch nodes net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi Accepted
[net-next,v7,11/16] dt-bindings: net: dsa: qca8k: add LEDs definition example net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi Accepted
[net-next,v7,10/16] dt-bindings: net: ethernet-controller: Document support for LEDs node net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi Accepted
[net-next,v7,09/16] net: phy: marvell: Implement led_blink_set() net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi New
[net-next,v7,08/16] net: phy: phy_device: Call into the PHY driver to set LED blinking net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi New
[net-next,v7,07/16] net: phy: marvell: Add software control of the LEDs net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi New
[net-next,v7,06/16] net: phy: phy_device: Call into the PHY driver to set LED brightness net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi New
[net-next,v7,05/16] net: phy: Add a binding for PHY LEDs net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi New
[net-next,v7,04/16] leds: Provide stubs for when CLASS_LED & NEW_LEDS are disabled net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi New
[net-next,v7,03/16] net: dsa: qca8k: add LEDs blink_set() support net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi Accepted
[net-next,v7,02/16] net: dsa: qca8k: add LEDs basic support net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi Accepted
[net-next,v7,01/16] net: dsa: qca8k: move qca8k_port_to_phy() to header net: Add basic LED support for switch/phy --- 2023-04-17 Christian Marangi Accepted
[net-next,v5,15/15] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port [net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-19 Christian Marangi New
[net-next,v5,12/15] arm: qcom: dt: Drop unevaluated properties in switch nodes for rb3011 [net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-19 Christian Marangi Superseded
[net-next,v5,11/15] dt-bindings: net: dsa: qca8k: add LEDs definition example [net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-19 Christian Marangi Superseded
[net-next,v5,10/15] dt-bindings: net: ethernet-controller: Document support for LEDs node [net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-19 Christian Marangi New
[net-next,v5,07/15] net: phy: marvell: Add software control of the LEDs [net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-19 Christian Marangi Superseded
[net-next,v5,05/15] net: phy: Add a binding for PHY LEDs [net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-19 Christian Marangi Superseded
[net-next,v5,04/15] leds: Provide stubs for when CLASS_LED is disabled [net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-19 Christian Marangi Superseded
[net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header [net-next,v5,01/15] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-19 Christian Marangi Superseded
[net-next,v3,13/14] dt-bindings: net: phy: Document support for LEDs node net: Add basic LED support for switch/phy --- 2023-03-14 Christian Marangi New
[net-next,v3,12/14] arm: qcom: dt: Add Switch LED for each port for rb3011 net: Add basic LED support for switch/phy --- 2023-03-14 Christian Marangi Superseded
[net-next,v3,10/14] dt-bindings: net: dsa: qca8k: add LEDs definition example net: Add basic LED support for switch/phy --- 2023-03-14 Christian Marangi Superseded
[net-next,v3,09/14] dt-bindings: net: dsa: dsa-port: Document support for LEDs node net: Add basic LED support for switch/phy --- 2023-03-14 Christian Marangi New
[net-next,v3,06/14] net: phy: marvell: Add software control of the LEDs net: Add basic LED support for switch/phy --- 2023-03-14 Christian Marangi Superseded
[net-next,v3,04/14] net: phy: Add a binding for PHY LEDs net: Add basic LED support for switch/phy --- 2023-03-14 Christian Marangi New
[net-next,v3,02/14] net: dsa: qca8k: add LEDs basic support net: Add basic LED support for switch/phy --- 2023-03-14 Christian Marangi New
[net-next,v2,14/14] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port [net-next,v2,01/14] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-09 Christian Marangi Superseded
[net-next,v2,12/14] arm: qcom: dt: Add Switch LED for each port for rb3011 [net-next,v2,01/14] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-09 Christian Marangi Superseded
[net-next,v2,08/14] net: phy: marvell: Implement led_blink_set() [net-next,v2,01/14] net: dsa: qca8k: move qca8k_port_to_phy() to header --- 2023-03-09 Christian Marangi Superseded
« 1 2 3 4 … 4 5 »