From patchwork Thu Jul 3 14:39:53 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 33028 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-pa0-f70.google.com (mail-pa0-f70.google.com [209.85.220.70]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id 9D82D20560 for ; Thu, 3 Jul 2014 14:40:16 +0000 (UTC) Received: by mail-pa0-f70.google.com with SMTP id lj1sf1747642pab.5 for ; Thu, 03 Jul 2014 07:40:15 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:delivered-to:delivered-to:from:to:date :message-id:mime-version:cc:subject:precedence:list-id :list-unsubscribe:list-archive:list-post:list-help:list-subscribe :errors-to:sender:x-original-sender :x-original-authentication-results:mailing-list:content-type :content-transfer-encoding; bh=/fFAEKHtqBKPDOJTLZXvc6UyJ7L23c3CdL22I6t0MZ8=; b=IvIcTXXBEPaeNpelOBYXoYauWHVSsW2D4+E9lyUUpG9uEy0hz4pbvSYtY4yHSi690k h5P2SRk2b1oTVg3QwLcR3WQBpNXJTMUs0SfGnl+7SOt3GlhmKbVoKlCsxzqVYNEcD7KI T4cBEIdoL9g/hA+IVDlovNWGkoYjgm0EIDDOLtftHhc2iKVMQnh+zKeZRT86Tv+EBlQb 6zvQIdRX8gnvYiIxruVUoWbHt2EvL0DCo/atxyxaAxcG7m7AlGTHAUX2aylN0xrwTBMh +tafQYnBLIJOQ305B6eKH8DYLPzKtsk4aZk+r9wg7vQZsQaMwFe1YnEFgfbZ7jaAHyhC g5Ng== X-Gm-Message-State: ALoCoQmjPXP4t3gUMMYZI73Q7h0tUCBbA1TW3XANf9DdqRtzEe3QnNH78BzdEBRsQGHEfMnaf1ip X-Received: by 10.66.185.9 with SMTP id ey9mr2546652pac.26.1404398415769; Thu, 03 Jul 2014 07:40:15 -0700 (PDT) X-BeenThere: patchwork-forward@linaro.org Received: by 10.140.91.86 with SMTP id y80ls545029qgd.0.gmail; Thu, 03 Jul 2014 07:40:15 -0700 (PDT) X-Received: by 10.58.19.10 with SMTP id a10mr4314736vee.1.1404398415628; Thu, 03 Jul 2014 07:40:15 -0700 (PDT) Received: from mail-vc0-f177.google.com (mail-vc0-f177.google.com [209.85.220.177]) by mx.google.com with ESMTPS id t10si14250936vdf.82.2014.07.03.07.40.15 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Thu, 03 Jul 2014 07:40:15 -0700 (PDT) Received-SPF: pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.220.177 as permitted sender) client-ip=209.85.220.177; Received: by mail-vc0-f177.google.com with SMTP id ij19so305804vcb.22 for ; Thu, 03 Jul 2014 07:40:15 -0700 (PDT) X-Received: by 10.220.44.141 with SMTP id a13mr598343vcf.71.1404398415484; Thu, 03 Jul 2014 07:40:15 -0700 (PDT) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.221.37.5 with SMTP id tc5csp381495vcb; Thu, 3 Jul 2014 07:40:14 -0700 (PDT) X-Received: by 10.180.90.233 with SMTP id bz9mr11231331wib.42.1404398413632; Thu, 03 Jul 2014 07:40:13 -0700 (PDT) Received: from alsa0.perex.cz (alsa0.perex.cz. [77.48.224.243]) by mx.google.com with ESMTP id wo8si14938902wjc.35.2014.07.03.07.40.12 for ; Thu, 03 Jul 2014 07:40:13 -0700 (PDT) Received-SPF: none (google.com: alsa-devel-bounces@alsa-project.org does not designate permitted sender hosts) client-ip=77.48.224.243; Received: by alsa0.perex.cz (Postfix, from userid 1000) id BAC3C2658FB; Thu, 3 Jul 2014 16:40:11 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.2.4 (2008-01-01) on mail1.perex.cz X-Spam-Level: X-Spam-Status: No, score=0.0 required=5.0 tests=none autolearn=disabled version=3.2.4 Received: from alsa0.perex.cz (localhost [IPv6:::1]) by alsa0.perex.cz (Postfix) with ESMTP id 83492261A49; Thu, 3 Jul 2014 16:40:06 +0200 (CEST) X-Original-To: alsa-devel@alsa-project.org Delivered-To: alsa-devel@alsa-project.org Received: by alsa0.perex.cz (Postfix, from userid 1000) id D91432654B3; Thu, 3 Jul 2014 16:40:04 +0200 (CEST) Received: from devils.ext.ti.com (devils.ext.ti.com [198.47.26.153]) by alsa0.perex.cz (Postfix) with ESMTP id B36FE2619E9 for ; Thu, 3 Jul 2014 16:39:57 +0200 (CEST) Received: from dlelxv90.itg.ti.com ([172.17.2.17]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id s63EdtGd011483; Thu, 3 Jul 2014 09:39:55 -0500 Received: from DLEE71.ent.ti.com (dlee71.ent.ti.com [157.170.170.114]) by dlelxv90.itg.ti.com (8.14.3/8.13.8) with ESMTP id s63EdtQG012113; Thu, 3 Jul 2014 09:39:55 -0500 Received: from dlep32.itg.ti.com (157.170.170.100) by DLEE71.ent.ti.com (157.170.170.114) with Microsoft SMTP Server id 14.3.174.1; Thu, 3 Jul 2014 09:39:55 -0500 Received: from legion.dal.design.ti.com (legion.dal.design.ti.com [128.247.22.53]) by dlep32.itg.ti.com (8.14.3/8.13.8) with ESMTP id s63Edtn2027337; Thu, 3 Jul 2014 09:39:55 -0500 Received: from localhost (j-172-22-142-251.vpn.ti.com [172.22.142.251]) by legion.dal.design.ti.com (8.11.7p1+Sun/8.11.7) with ESMTP id s63Edst23537; Thu, 3 Jul 2014 09:39:55 -0500 (CDT) From: Dan Murphy To: Date: Thu, 3 Jul 2014 09:39:53 -0500 Message-ID: <1404398393-21497-1-git-send-email-dmurphy@ti.com> X-Mailer: git-send-email 1.7.9.5 MIME-Version: 1.0 Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, broonie@kernel.org, linux-kernel@vger.kernel.org, Dan Murphy Subject: [alsa-devel] [PATCH v4] ASoC: tas2552: Support TI TAS2552 Amplifier X-BeenThere: alsa-devel@alsa-project.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: , List-Help: , List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: dmurphy@ti.com X-Original-Authentication-Results: mx.google.com; spf=pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.220.177 as permitted sender) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 Support the TI TAS2552 Class D amplifier. The TAS2552 is a high efficiency Class-D audio power amplifier with advanced battery current management and an integrated Class-G boost The device constantly measures the current and voltage across the load and provides a digital stream of this information. Signed-off-by: Dan Murphy --- v4 - Added pm_runtime support, removed magical numbers, added regulator support, changed from legacy gpio to new gpiod calls, fixed default register values, flipped on battery tracking support and added suspend/resume support - https://patchwork.kernel.org/patch/4465611/ .../devicetree/bindings/sound/tas2552.txt | 25 + include/sound/tas2552-plat.h | 25 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2552.c | 574 ++++++++++++++++++++ sound/soc/codecs/tas2552.h | 119 ++++ 6 files changed, 750 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2552.txt create mode 100644 include/sound/tas2552-plat.h create mode 100644 sound/soc/codecs/tas2552.c create mode 100644 sound/soc/codecs/tas2552.h diff --git a/Documentation/devicetree/bindings/sound/tas2552.txt b/Documentation/devicetree/bindings/sound/tas2552.txt new file mode 100644 index 0000000..00223dc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2552.txt @@ -0,0 +1,25 @@ +Texas Instruments - tas2552 Codec module + +The tas2552 serial control bus communicates through I2C protocols + +Required properties: + +- compatible - One of: + "ti,tas2552" - TAS2552 + +- reg - I2C slave address + +Optional properties: + +- enable-gpio - gpio pin to enable/disable the device + +Example: + +tas2552: tas2552@41 { + compatible = "ti,tas2552"; + reg = <0x41>; + enable-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; +}; + +For more product information please see the link below: +http://www.ti.com/product/TAS2552 diff --git a/include/sound/tas2552-plat.h b/include/sound/tas2552-plat.h new file mode 100644 index 0000000..65e7627 --- /dev/null +++ b/include/sound/tas2552-plat.h @@ -0,0 +1,25 @@ +/* + * TAS2552 driver platform header + * + * Copyright (C) 2014 Texas Instruments Inc. + * + * Author: Dan Murphy + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef TAS2552_PLAT_H +#define TAS2552_PLAT_H + +struct tas2552_platform_data { + int enable_gpio; +}; + +#endif diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 0b9571c..cc09261 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -99,6 +99,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_TLV320AIC32X4 if I2C select SND_SOC_TLV320AIC3X if I2C select SND_SOC_TPA6130A2 if I2C + select SND_SOC_TAS2552 if I2C select SND_SOC_TLV320DAC33 if I2C select SND_SOC_TWL4030 if TWL4030_CORE select SND_SOC_TWL6040 if TWL6040_CORE @@ -754,4 +755,8 @@ config SND_SOC_TPA6130A2 tristate "Texas Instruments TPA6130A2 headphone amplifier" depends on I2C +config SND_SOC_TAS2552 + tristate "Texas Instruments TAS2552 Mono Audio amplifier" + depends on I2C + endmenu diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 1bd6e1c..33bc7228 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -162,6 +162,7 @@ snd-soc-wm-hubs-objs := wm_hubs.o # Amp snd-soc-max9877-objs := max9877.o snd-soc-tpa6130a2-objs := tpa6130a2.o +snd-soc-tas2552-objs := tas2552.o obj-$(CONFIG_SND_SOC_88PM860X) += snd-soc-88pm860x.o obj-$(CONFIG_SND_SOC_AB8500_CODEC) += snd-soc-ab8500-codec.o @@ -325,3 +326,4 @@ obj-$(CONFIG_SND_SOC_WM_HUBS) += snd-soc-wm-hubs.o # Amp obj-$(CONFIG_SND_SOC_MAX9877) += snd-soc-max9877.o obj-$(CONFIG_SND_SOC_TPA6130A2) += snd-soc-tpa6130a2.o +obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o diff --git a/sound/soc/codecs/tas2552.c b/sound/soc/codecs/tas2552.c new file mode 100644 index 0000000..6eab02f --- /dev/null +++ b/sound/soc/codecs/tas2552.c @@ -0,0 +1,574 @@ +/* + * tas2552.c - ALSA SoC Texas Instruments TAS2552 Mono Audio Amplifier + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Dan Murphy + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "tas2552.h" + +static struct reg_default tas2552_reg_defs[] = { + {TAS2552_CFG_1, 0x22}, + {TAS2552_CFG_3, 0x80}, + {TAS2552_DOUT, 0x00}, + {TAS2552_OUTPUT_DATA, 0xc0}, + {TAS2552_PDM_CFG, 0x01}, + {TAS2552_PGA_GAIN, 0x00}, + {TAS2552_BOOST_PT_CTRL, 0x0f}, + {TAS2552_LIMIT_LVL_CTRL, 0x0c}, + {TAS2552_LIMIT_RATE_HYS, 0x08}, + {TAS2552_CFG_2, 0xef}, + {TAS2552_SER_CTRL_1, 0x00}, + {TAS2552_SER_CTRL_2, 0x00}, + {TAS2552_PLL_CTRL_1, 0x10}, + {TAS2552_PLL_CTRL_2, 0x00}, + {TAS2552_PLL_CTRL_3, 0x00}, + {TAS2552_BTIP, 0x8f}, + {TAS2552_BTS_CTRL, 0x80}, + {TAS2552_LIMIT_RELEASE, 0x04}, + {TAS2552_LIMIT_INT_COUNT, 0x00}, + {TAS2552_EDGE_RATE_CTRL, 0x40}, + {TAS2552_VBAT_DATA, 0x00}, +}; + +#define TAS2552_NUM_SUPPLIES 3 +static const char *tas2552_supply_names[TAS2552_NUM_SUPPLIES] = { + "vbat", /* vbat voltage */ + "iovdd", /* I/O Voltage */ + "avdd", /* Analog DAC Voltage */ +}; + +struct tas2552_data { + struct mutex mutex; + struct snd_soc_codec *codec; + struct regmap *regmap; + struct i2c_client *tas2552_client; + struct regulator_bulk_data supplies[TAS2552_NUM_SUPPLIES]; + unsigned char regs[TAS2552_VBAT_DATA]; + struct gpio_desc *enable_gpio; + u8 power_state:1; +}; + +static int tas2552_power(struct tas2552_data *data, u8 power) +{ + int ret = 0; + + mutex_lock(&data->mutex); + + if (power) { + if (data->enable_gpio) + gpiod_set_value(data->enable_gpio, 1); + + data->power_state = 1; + } else { + if (data->enable_gpio) + gpiod_set_value(data->enable_gpio, 0); + + data->power_state = 0; + } + + mutex_unlock(&data->mutex); + return ret; +} + +static void tas2552_sw_shutdown(struct tas2552_data *tas_data, int sw_shutdown) +{ + u8 cfg1_reg = 0x0; + + if (sw_shutdown) + cfg1_reg |= TAS2552_SWS_MASK; + else + cfg1_reg &= ~TAS2552_SWS_MASK; + + snd_soc_update_bits(tas_data->codec, TAS2552_CFG_1, + TAS2552_SWS_MASK, cfg1_reg); +} + +static int tas2552_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + u8 wclk_reg; + struct snd_soc_codec *codec = dai->codec; + + /* Setting DAC clock dividers based on substream sample rate. */ + switch (params_rate(params)) { + case 8000: + wclk_reg = TAS2552_8KHZ; + break; + case 11025: + wclk_reg = TAS2552_11_12KHZ; + break; + case 16000: + wclk_reg = TAS2552_16KHZ; + break; + case 32000: + wclk_reg = TAS2552_32KHZ; + break; + case 22050: + case 24000: + wclk_reg = TAS2552_22_24KHZ; + break; + case 44100: + case 48000: + wclk_reg = TAS2552_44_48KHZ; + break; + case 96000: + wclk_reg = TAS2552_88_96KHZ; + break; + default: + dev_vdbg(codec->dev, "Substream sample rate is not found\n"); + return -EINVAL; + } + + pm_runtime_get_sync(codec->dev); + + snd_soc_update_bits(codec, TAS2552_CFG_3, TAS2552_WCLK_MASK, wclk_reg); + + pm_runtime_put(codec->dev); + + return 0; +} + +static int tas2552_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + u8 serial_format; + struct snd_soc_codec *codec = dai->codec; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + serial_format = 0x00; + break; + case SND_SOC_DAIFMT_CBS_CFM: + serial_format = TAS2552_WORD_CLK_MASK; + break; + case SND_SOC_DAIFMT_CBM_CFS: + serial_format = TAS2552_BIT_CLK_MASK; + break; + case SND_SOC_DAIFMT_CBM_CFM: + serial_format = (TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK); + break; + default: + return -EINVAL; + } + + pm_runtime_get_sync(codec->dev); + + snd_soc_update_bits(codec, TAS2552_SER_CTRL_1, + (TAS2552_BIT_CLK_MASK | TAS2552_WORD_CLK_MASK), + serial_format); + + pm_runtime_put(codec->dev); + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + serial_format = 0x0; + break; + case SND_SOC_DAIFMT_DSP_A: + serial_format = TAS2552_DAIFMT_DSP; + break; + case SND_SOC_DAIFMT_RIGHT_J: + serial_format = TAS2552_DAIFMT_RIGHT_J; + break; + case SND_SOC_DAIFMT_LEFT_J: + serial_format = TAS2552_DAIFMT_LEFT_J; + break; + + default: + return -EINVAL; + } + + pm_runtime_get_sync(codec->dev); + + snd_soc_update_bits(codec, TAS2552_SER_CTRL_1, TAS2552_DATA_FORMAT_MASK, + serial_format); + + pm_runtime_put(codec->dev); + + return 0; +} + +static int tas2552_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + + /* Fill in the PLL control registers for J & D + * PLL_CLK = (.5 * freq * J.D) / 2^p + * Need to fill in J and D here based on incoming freq + */ + pm_runtime_get_sync(codec->dev); + + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_PLL_ENABLE, 0); + + snd_soc_write(codec, TAS2552_PLL_CTRL_1, 0x10); + snd_soc_write(codec, TAS2552_PLL_CTRL_2, 0x00); + snd_soc_write(codec, TAS2552_PLL_CTRL_3, 0x00); + + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_PLL_ENABLE, + TAS2552_PLL_ENABLE); + + pm_runtime_put(codec->dev); + + return 0; +} + +static int tas2552_mute(struct snd_soc_dai *dai, int mute) +{ + u8 cfg1_reg = 0x0; + struct snd_soc_codec *codec = dai->codec; + + if (mute) + cfg1_reg |= TAS2552_MUTE_MASK; + else + cfg1_reg &= ~TAS2552_MUTE_MASK; + + pm_runtime_get_sync(codec->dev); + + snd_soc_update_bits(codec, TAS2552_CFG_1, TAS2552_MUTE_MASK, cfg1_reg); + + pm_runtime_put(codec->dev); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME +static int tas2552_runtime_suspend(struct device *dev) +{ + struct tas2552_data *tas2552 = dev_get_drvdata(dev); + + tas2552_sw_shutdown(tas2552, 1); + tas2552_power(tas2552, 0); + + regcache_cache_only(tas2552->regmap, true); + regcache_mark_dirty(tas2552->regmap); + + return 0; +} + +static int tas2552_runtime_resume(struct device *dev) +{ + struct tas2552_data *tas2552 = dev_get_drvdata(dev); + + tas2552_power(tas2552, 1); + tas2552_sw_shutdown(tas2552, 0); + + regcache_cache_only(tas2552->regmap, false); + regcache_sync(tas2552->regmap); + + return 0; +} +#endif + +static const struct dev_pm_ops tas2552_pm = { + SET_RUNTIME_PM_OPS(tas2552_runtime_suspend, tas2552_runtime_resume, + NULL) +}; + +static int tas2552_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + + pm_runtime_get_sync(codec->dev); + + /* Turn on Class D amplifier */ + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_CLASSD_EN_MASK, + TAS2552_CLASSD_EN); + return 0; +} + +static void tas2552_shutdown(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + + /* Turn on Class D amplifier */ + snd_soc_update_bits(codec, TAS2552_CFG_2, TAS2552_CLASSD_EN_MASK, + TAS2552_CLASSD_EN); + + pm_runtime_put(codec->dev); +} + +static struct snd_soc_dai_ops tas2552_speaker_dai_ops = { + .hw_params = tas2552_hw_params, + .set_sysclk = tas2552_set_dai_sysclk, + .set_fmt = tas2552_set_dai_fmt, + .startup = tas2552_startup, + .shutdown = tas2552_shutdown, + .digital_mute = tas2552_mute, +}; + +/* Formats supported by TAS2552 driver. */ +#define TAS2552_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +/* TAS2552 dai structure. */ +static struct snd_soc_dai_driver tas2552_dai[] = { + { + .name = "tas2552-amplifier", + .playback = { + .stream_name = "Speaker", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats = TAS2552_FORMATS, + }, + .ops = &tas2552_speaker_dai_ops, + }, +}; + +/* + * DAC digital volumes. From -7 to 24 dB in 1 dB steps + */ +static DECLARE_TLV_DB_SCALE(dac_tlv, -7, 100, 24); + +static const struct snd_kcontrol_new tas2552_snd_controls[] = { + SOC_SINGLE_TLV("Speaker Driver Playback Volume", + TAS2552_PGA_GAIN, 0, 0x1f, 1, dac_tlv), +}; + +static int tas2552_codec_probe(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + int ret; + + tas2552->codec = codec; + + ret = regulator_bulk_enable(ARRAY_SIZE(tas2552->supplies), + tas2552->supplies); + + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", + ret); + return ret; + } + + tas2552_power(tas2552, 1); + tas2552_sw_shutdown(tas2552, 0); + + pm_runtime_set_active(codec->dev); + pm_runtime_set_autosuspend_delay(codec->dev, 1000); + pm_runtime_use_autosuspend(codec->dev); + pm_runtime_enable(codec->dev); + pm_runtime_mark_last_busy(codec->dev); + pm_runtime_put_sync_autosuspend(codec->dev); + + snd_soc_write(codec, TAS2552_CFG_1, TAS2552_MUTE_MASK | + TAS2552_SWS_MASK | TAS2552_PLL_SRC_BCLK); + snd_soc_write(codec, TAS2552_CFG_3, TAS2552_I2S_OUT_SEL | + TAS2552_DIN_SRC_SEL_AVG_L_R | TAS2552_88_96KHZ); + snd_soc_write(codec, TAS2552_DOUT, TAS2552_PDM_DATA_I); + snd_soc_write(codec, TAS2552_OUTPUT_DATA, TAS2552_PDM_DATA_V_I | 0x8); + snd_soc_write(codec, TAS2552_PDM_CFG, TAS2552_PDM_BCLK_SEL); + /* 0dB gain */ + snd_soc_write(codec, TAS2552_PGA_GAIN, 0x10); + snd_soc_write(codec, TAS2552_BOOST_PT_CTRL, TAS2552_APT_DELAY_200 | + TAS2552_APT_THRESH_2_1_7); + /** + * Data sheet indicates to write 0x0c to 0x0d during init but no + * additional information is given to what it means. + */ + snd_soc_write(codec, TAS2552_LIMIT_LVL_CTRL, 0x0c); + /** + * Data sheet indicates to write 0x20 to 0x0e during init but no + * additional information is given to what it means. + */ + + snd_soc_write(codec, TAS2552_LIMIT_RATE_HYS, 0x20); + + snd_soc_write(codec, TAS2552_CFG_2, TAS2552_CLASSD_EN | + TAS2552_BOOST_EN | TAS2552_APT_EN | + TAS2552_PLL_ENABLE | TAS2552_LIM_EN); + + return 0; +} + +static int tas2552_codec_remove(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + + tas2552_power(tas2552, 0); + + return 0; +}; + +#ifdef CONFIG_PM +static int tas2552_suspend(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + int ret; + + pm_runtime_put(codec->dev); + + ret = regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies), + tas2552->supplies); + + if (ret != 0) + dev_err(codec->dev, "Failed to disable supplies: %d\n", + ret); + return 0; +} + +static int tas2552_resume(struct snd_soc_codec *codec) +{ + struct tas2552_data *tas2552 = snd_soc_codec_get_drvdata(codec); + int ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(tas2552->supplies), + tas2552->supplies); + + if (ret != 0) { + dev_err(codec->dev, "Failed to enable supplies: %d\n", + ret); + } + + pm_runtime_get_sync(codec->dev); + + return 0; +} +#else +#define tas2552_suspend NULL +#define tas2552_resume NULL +#endif + +static struct snd_soc_codec_driver soc_codec_dev_tas2552 = { + .probe = tas2552_codec_probe, + .remove = tas2552_codec_remove, + .suspend = tas2552_suspend, + .resume = tas2552_resume, + .controls = tas2552_snd_controls, + .num_controls = ARRAY_SIZE(tas2552_snd_controls), +}; + +static const struct regmap_config tas2552_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = TAS2552_MAX_REG, + .reg_defaults = tas2552_reg_defs, + .num_reg_defaults = ARRAY_SIZE(tas2552_reg_defs), + .cache_type = REGCACHE_RBTREE, +}; + +static int tas2552_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev; + struct tas2552_data *data; + int ret; + int i; + + dev = &client->dev; + data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + data->enable_gpio = devm_gpiod_get(dev, "enable"); + if (IS_ERR(data->enable_gpio)) { + ret = PTR_ERR(data->enable_gpio); + if (ret != -ENOENT && ret != -ENOSYS) + return ret; + + data->enable_gpio = NULL; + } else { + gpiod_direction_output(data->enable_gpio, 0); + } + + data->tas2552_client = client; + data->regmap = devm_regmap_init_i2c(client, &tas2552_regmap_config); + if (IS_ERR(data->regmap)) { + ret = PTR_ERR(data->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + for (i = 0; i < ARRAY_SIZE(data->supplies); i++) + data->supplies[i].supply = tas2552_supply_names[i]; + + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies), + data->supplies); + if (ret != 0) + dev_err(dev, "Failed to request supplies: %d\n", ret); + + mutex_init(&data->mutex); + + dev_set_drvdata(&client->dev, data); + + ret = snd_soc_register_codec(&client->dev, + &soc_codec_dev_tas2552, + tas2552_dai, ARRAY_SIZE(tas2552_dai)); + if (ret < 0) + dev_err(&client->dev, "Failed to register codec: %d\n", ret); + + return 0; +} + +static int tas2552_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + return 0; +} + +static const struct i2c_device_id tas2552_id[] = { + { "tas2552-codec", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tas2552_id); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id tas2552_of_match[] = { + { .compatible = "ti,tas2552", }, + {}, +}; +MODULE_DEVICE_TABLE(of, tas2552_of_match); +#endif + +static struct i2c_driver tas2552_i2c_driver = { + .driver = { + .name = "tas2552-codec", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tas2552_of_match), + .pm = &tas2552_pm, + }, + .probe = tas2552_probe, + .remove = tas2552_i2c_remove, + .id_table = tas2552_id, +}; + +module_i2c_driver(tas2552_i2c_driver); + +MODULE_AUTHOR("Dan Muprhy "); +MODULE_DESCRIPTION("TAS2552 Audio amplifier driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/tas2552.h b/sound/soc/codecs/tas2552.h new file mode 100644 index 0000000..52b2d64 --- /dev/null +++ b/sound/soc/codecs/tas2552.h @@ -0,0 +1,119 @@ +/* + * tas2552.h - ALSA SoC Texas Instruments TAS2552 Mono Audio Amplifier + * + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com + * + * Author: Dan Murphy + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef __TAS2552_H__ +#define __TAS2552_H__ + +/* Register Address Map */ +#define TAS2552_DEVICE_STATUS 0x00 +#define TAS2552_CFG_1 0x01 +#define TAS2552_CFG_2 0x02 +#define TAS2552_CFG_3 0x03 +#define TAS2552_DOUT 0x04 +#define TAS2552_SER_CTRL_1 0x05 +#define TAS2552_SER_CTRL_2 0x06 +#define TAS2552_OUTPUT_DATA 0x07 +#define TAS2552_PLL_CTRL_1 0x08 +#define TAS2552_PLL_CTRL_2 0x09 +#define TAS2552_PLL_CTRL_3 0x0a +#define TAS2552_BTIP 0x0b +#define TAS2552_BTS_CTRL 0x0c +#define TAS2552_LIMIT_LVL_CTRL 0x0d +#define TAS2552_LIMIT_RATE_HYS 0x0e +#define TAS2552_LIMIT_RELEASE 0x0f +#define TAS2552_LIMIT_INT_COUNT 0x10 +#define TAS2552_PDM_CFG 0x11 +#define TAS2552_PGA_GAIN 0x12 +#define TAS2552_EDGE_RATE_CTRL 0x13 +#define TAS2552_BOOST_PT_CTRL 0x14 +#define TAS2552_VER_NUM 0x16 +#define TAS2552_VBAT_DATA 0x19 +#define TAS2552_MAX_REG 0x20 + +/* CFG1 Register Masks */ +#define TAS2552_MUTE_MASK (1 << 2) +#define TAS2552_SWS_MASK (1 << 1) +#define TAS2552_WCLK_MASK 0x07 +#define TAS2552_CLASSD_EN_MASK (1 << 7) + +/* CFG2 Register Masks */ +#define TAS2552_CLASSD_EN (1 << 7) +#define TAS2552_BOOST_EN (1 << 6) +#define TAS2552_APT_EN (1 << 5) +#define TAS2552_PLL_ENABLE (1 << 3) +#define TAS2552_LIM_EN (1 << 2) +#define TAS2552_IVSENSE_EN (1 << 1) + +/* CFG3 Register Masks */ +#define TAS2552_WORD_CLK_MASK (1 << 7) +#define TAS2552_BIT_CLK_MASK (1 << 6) +#define TAS2552_DATA_FORMAT_MASK (0x11 << 2) + +#define TAS2552_DAIFMT_DSP (1 << 3) +#define TAS2552_DAIFMT_RIGHT_J (1 << 4) +#define TAS2552_DAIFMT_LEFT_J (0x11 << 3) + +#define TAS2552_PLL_SRC_MCLK 0x00 +#define TAS2552_PLL_SRC_BCLK (1 << 3) +#define TAS2552_PLL_SRC_IVCLKIN (1 << 4) +#define TAS2552_PLL_SRC_1_8_FIXED (0x11 << 3) + +#define TAS2552_DIN_SRC_SEL_MUTED 0x00 +#define TAS2552_DIN_SRC_SEL_LEFT (1 << 4) +#define TAS2552_DIN_SRC_SEL_RIGHT (1 << 5) +#define TAS2552_DIN_SRC_SEL_AVG_L_R (0x11 << 4) + +#define TAS2552_PDM_IN_SEL (1 << 5) +#define TAS2552_I2S_OUT_SEL (1 << 6) +#define TAS2552_ANALOG_IN_SEL (1 << 7) + +/* CFG3 WCLK Dividers */ +#define TAS2552_8KHZ 0x00 +#define TAS2552_11_12KHZ (1 << 1) +#define TAS2552_16KHZ (1 << 2) +#define TAS2552_22_24KHZ (1 << 3) +#define TAS2552_32KHZ (1 << 4) +#define TAS2552_44_48KHZ (1 << 5) +#define TAS2552_88_96KHZ (1 << 6) +#define TAS2552_176_192KHZ (1 << 7) + +/* OUTPUT_DATA register */ +#define TAS2552_PDM_DATA_I 0x00 +#define TAS2552_PDM_DATA_V (1 << 6) +#define TAS2552_PDM_DATA_I_V (1 << 7) +#define TAS2552_PDM_DATA_V_I (0x11 << 6) + +/* PDM CFG Register */ +#define TAS2552_PDM_DATA_ES_RISE 0x4 + +#define TAS2552_PDM_PLL_CLK_SEL 0x00 +#define TAS2552_PDM_IV_CLK_SEL (1 << 1) +#define TAS2552_PDM_BCLK_SEL (1 << 2) +#define TAS2552_PDM_MCLK_SEL (1 << 3) + +/* Boost pass-through register */ +#define TAS2552_APT_DELAY_50 0x00 +#define TAS2552_APT_DELAY_75 (1 << 1) +#define TAS2552_APT_DELAY_125 (1 << 2) +#define TAS2552_APT_DELAY_200 (1 << 3) + +#define TAS2552_APT_THRESH_2_5 0x00 +#define TAS2552_APT_THRESH_1_7 (1 << 3) +#define TAS2552_APT_THRESH_1_4_1_1 (1 << 4) +#define TAS2552_APT_THRESH_2_1_7 (0x11 << 2) + +#endif