diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
new file mode 100644
index 00000000..487a844
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -0,0 +1,196 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gateworks System Controller
+
+description: |
+  The Gateworks System Controller (GSC) is a device present across various
+  Gateworks product families that provides a set of system related features
+  such as the following (refer to the board hardware user manuals to see what
+  features are present)
+   - Watchdog Timer
+   - GPIO
+   - Pushbutton controller
+   - Hardware monitor with ADC's for temperature and voltage rails and
+     fan controller
+
+maintainers:
+  - Tim Harvey <tharvey@gateworks.com>
+  - Robert Jones <rjones@gateworks.com>
+
+properties:
+  $nodename:
+    pattern: "gsc@[0-9a-f]{1,2}"
+  compatible:
+    const: gw,gsc
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  adc:
+    type: object
+    description: Optional hardware monitoring module
+
+    properties:
+      compatible:
+        const: gw,gsc-adc
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^channel@[0-9]+$":
+        type: object
+        description: |
+          Properties for a single ADC which can report cooked values
+          (i.e. temperature sensor based on thermister), raw values
+          (i.e. voltage rail with a pre-scaling resistor divider).
+
+        properties:
+          reg:
+            description: Register of the ADC
+            maxItems: 1
+
+          label:
+            description: Name of the ADC input
+
+          gw,mode:
+            description: |
+              conversion mode:
+                0 - temperature, in C*10
+                1 - pre-scaled voltage value
+                2 - scaled voltage based on an optional resistor divider
+                    and optional offset
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2]
+
+          gw,voltage-divider-ohms:
+            description: Values of resistors for divider on raw ADC input
+            maxItems: 2
+            items:
+             minimum: 1000
+             maximum: 1000000
+
+          gw,voltage-offset-microvolt:
+            description: |
+              A positive voltage offset to apply to a raw ADC
+              (i.e. to compensate for a diode drop).
+            minimum: 0
+            maximum: 1000000
+
+        required:
+          - gw,mode
+          - reg
+          - label
+
+    required:
+      - compatible
+      - "#address-cells"
+      - "#size-cells"
+
+patternProperties:
+  "^fan-controller@[0-9a-f]+$":
+    type: object
+    description: Optional fan controller
+
+    properties:
+      compatible:
+        const: gw,gsc-fan
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The fan controller base address
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gsc@20 {
+            compatible = "gw,gsc";
+            reg = <0x20>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 GPIO_ACTIVE_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adc {
+                compatible = "gw,gsc-adc";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                channel@0 { /* A0: Board Temperature */
+                    reg = <0x00>;
+                    label = "temp";
+                    gw,mode = <0>;
+                };
+
+                channel@2 { /* A1: Input Voltage (raw ADC) */
+                    reg = <0x02>;
+                    label = "vdd_vin";
+                    gw,mode = <1>;
+                    gw,voltage-divider-ohms = <22100 1000>;
+                    gw,voltage-offset-microvolt = <800000>;
+                };
+
+                channel@b { /* A2: Battery voltage */
+                    reg = <0x0b>;
+                    label = "vdd_bat";
+                    gw,mode = <1>;
+                };
+            };
+
+            fan-controller@2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "gw,gsc-fan";
+                reg = <0x2c>;
+            };
+        };
+    };
