diff mbox series

[v5,3/4] spmi: mediatek: Add support for MT6873/8192

Message ID 1608691469-20919-4-git-send-email-hsin-hsiung.wang@mediatek.com
State New
Headers show
Series Add SPMI support for Mediatek MT6873/8192 SoC IC | expand

Commit Message

Hsin-Hsiung Wang Dec. 23, 2020, 2:44 a.m. UTC
Add spmi support for MT6873/8192.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
---
 drivers/spmi/Kconfig         |   9 +
 drivers/spmi/Makefile        |   1 +
 drivers/spmi/spmi-mtk-pmif.c | 504 +++++++++++++++++++++++++++++++++++
 3 files changed, 514 insertions(+)
 create mode 100644 drivers/spmi/spmi-mtk-pmif.c

Comments

Nicolas Boichat Jan. 5, 2021, 7:40 a.m. UTC | #1
On Wed, Dec 23, 2020 at 10:45 AM Hsin-Hsiung Wang
<hsin-hsiung.wang@mediatek.com> wrote:
>
> Add spmi support for MT6873/8192.
>
> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
> ---
>  drivers/spmi/Kconfig         |   9 +
>  drivers/spmi/Makefile        |   1 +
>  drivers/spmi/spmi-mtk-pmif.c | 504 +++++++++++++++++++++++++++++++++++
>  3 files changed, 514 insertions(+)
>  create mode 100644 drivers/spmi/spmi-mtk-pmif.c
>
> diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
> index a53bad541f1a..418848840999 100644
> --- a/drivers/spmi/Kconfig
> +++ b/drivers/spmi/Kconfig
> @@ -25,4 +25,13 @@ config SPMI_MSM_PMIC_ARB
>           This is required for communicating with Qualcomm PMICs and
>           other devices that have the SPMI interface.
>
> +config SPMI_MTK_PMIF
> +       tristate "Mediatek SPMI Controller (PMIC Arbiter)"
> +       help
> +         If you say yes to this option, support will be included for the
> +         built-in SPMI PMIC Arbiter interface on Mediatek family
> +         processors.
> +
> +         This is required for communicating with Mediatek PMICs and
> +         other devices that have the SPMI interface.
>  endif
> diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
> index 55a94cadeffe..91f303b96925 100644
> --- a/drivers/spmi/Makefile
> +++ b/drivers/spmi/Makefile
> @@ -5,3 +5,4 @@
>  obj-$(CONFIG_SPMI)     += spmi.o
>
>  obj-$(CONFIG_SPMI_MSM_PMIC_ARB)        += spmi-pmic-arb.o
> +obj-$(CONFIG_SPMI_MTK_PMIF)    += spmi-mtk-pmif.o
> \ No newline at end of file

Newline at end of file please.

> diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
> new file mode 100644
> index 000000000000..711d3973800b
> --- /dev/null
> +++ b/drivers/spmi/spmi-mtk-pmif.c
> @@ -0,0 +1,504 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2020 MediaTek Inc.
> +
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/spmi.h>
> +
> +#define SWINF_IDLE     0x00
> +#define SWINF_WFVLDCLR 0x06
> +
> +#define GET_SWINF(x)   (((x) >> 1) & 0x7)
> +
> +#define PMIF_CMD_REG_0         0
> +#define PMIF_CMD_REG           1
> +#define PMIF_CMD_EXT_REG       2
> +#define PMIF_CMD_EXT_REG_LONG  3
> +
> +#define PMIF_DELAY_US   10
> +#define PMIF_TIMEOUT    (10 * 1000)

PMIF_TIMEOUT_US

> +
> +#define PMIF_CHAN_OFFSET 0x5
> +
> +#define SPMI_OP_ST_BUSY 1
> +
> +struct ch_reg {
> +       u32 ch_sta;
> +       u32 wdata;
> +       u32 rdata;
> +       u32 ch_send;
> +       u32 ch_rdy;
> +};
> +
> +struct pmif {
> +       void __iomem    *base;
> +       const u32       *regs;
> +       void __iomem    *spmimst_base;
> +       const u32       *spmimst_regs;
> +       u32             soc_chan;
> +       int             grpid;

Drop this, never used.

> +       raw_spinlock_t  lock;
> +       struct clk      *pmif_sys_ck;
> +       struct clk      *pmif_tmr_ck;
> +       struct clk      *spmimst_clk_mux;
> +       struct ch_reg   chan;
> +};
> +
> +enum pmif_regs {
> +       PMIF_INIT_DONE,
> +       PMIF_INF_EN,
> +       PMIF_ARB_EN,
> +       PMIF_CMDISSUE_EN,
> +       PMIF_TIMER_CTRL,
> +       PMIF_SPI_MODE_CTRL,
> +       PMIF_IRQ_EVENT_EN_0,
> +       PMIF_IRQ_FLAG_0,
> +       PMIF_IRQ_CLR_0,
> +       PMIF_IRQ_EVENT_EN_1,
> +       PMIF_IRQ_FLAG_1,
> +       PMIF_IRQ_CLR_1,
> +       PMIF_IRQ_EVENT_EN_2,
> +       PMIF_IRQ_FLAG_2,
> +       PMIF_IRQ_CLR_2,
> +       PMIF_IRQ_EVENT_EN_3,
> +       PMIF_IRQ_FLAG_3,
> +       PMIF_IRQ_CLR_3,
> +       PMIF_IRQ_EVENT_EN_4,
> +       PMIF_IRQ_FLAG_4,
> +       PMIF_IRQ_CLR_4,
> +       PMIF_WDT_EVENT_EN_0,
> +       PMIF_WDT_FLAG_0,
> +       PMIF_WDT_EVENT_EN_1,
> +       PMIF_WDT_FLAG_1,
> +       PMIF_SWINF_0_STA,
> +       PMIF_SWINF_0_WDATA_31_0,
> +       PMIF_SWINF_0_RDATA_31_0,
> +       PMIF_SWINF_0_ACC,
> +       PMIF_SWINF_0_VLD_CLR,
> +       PMIF_SWINF_1_STA,
> +       PMIF_SWINF_1_WDATA_31_0,
> +       PMIF_SWINF_1_RDATA_31_0,
> +       PMIF_SWINF_1_ACC,
> +       PMIF_SWINF_1_VLD_CLR,
> +       PMIF_SWINF_2_STA,
> +       PMIF_SWINF_2_WDATA_31_0,
> +       PMIF_SWINF_2_RDATA_31_0,
> +       PMIF_SWINF_2_ACC,
> +       PMIF_SWINF_2_VLD_CLR,
> +       PMIF_SWINF_3_STA,
> +       PMIF_SWINF_3_WDATA_31_0,
> +       PMIF_SWINF_3_RDATA_31_0,
> +       PMIF_SWINF_3_ACC,
> +       PMIF_SWINF_3_VLD_CLR,
> +};
> +
> +static const u32 mt6873_regs[] = {
> +       [PMIF_INIT_DONE] =      0x0000,
> +       [PMIF_INF_EN] =         0x0024,
> +       [PMIF_ARB_EN] =         0x0150,
> +       [PMIF_CMDISSUE_EN] =    0x03B4,
> +       [PMIF_TIMER_CTRL] =     0x03E0,
> +       [PMIF_SPI_MODE_CTRL] =  0x0400,
> +       [PMIF_IRQ_EVENT_EN_0] = 0x0418,
> +       [PMIF_IRQ_FLAG_0] =     0x0420,
> +       [PMIF_IRQ_CLR_0] =      0x0424,
> +       [PMIF_IRQ_EVENT_EN_1] = 0x0428,
> +       [PMIF_IRQ_FLAG_1] =     0x0430,
> +       [PMIF_IRQ_CLR_1] =      0x0434,
> +       [PMIF_IRQ_EVENT_EN_2] = 0x0438,
> +       [PMIF_IRQ_FLAG_2] =     0x0440,
> +       [PMIF_IRQ_CLR_2] =      0x0444,
> +       [PMIF_IRQ_EVENT_EN_3] = 0x0448,
> +       [PMIF_IRQ_FLAG_3] =     0x0450,
> +       [PMIF_IRQ_CLR_3] =      0x0454,
> +       [PMIF_IRQ_EVENT_EN_4] = 0x0458,
> +       [PMIF_IRQ_FLAG_4] =     0x0460,
> +       [PMIF_IRQ_CLR_4] =      0x0464,
> +       [PMIF_WDT_EVENT_EN_0] = 0x046C,
> +       [PMIF_WDT_FLAG_0] =     0x0470,
> +       [PMIF_WDT_EVENT_EN_1] = 0x0474,
> +       [PMIF_WDT_FLAG_1] =     0x0478,
> +       [PMIF_SWINF_0_ACC] =    0x0C00,
> +       [PMIF_SWINF_0_WDATA_31_0] =     0x0C04,
> +       [PMIF_SWINF_0_RDATA_31_0] =     0x0C14,
> +       [PMIF_SWINF_0_VLD_CLR] =        0x0C24,
> +       [PMIF_SWINF_0_STA] =    0x0C28,
> +       [PMIF_SWINF_1_ACC] =    0x0C40,
> +       [PMIF_SWINF_1_WDATA_31_0] =     0x0C44,
> +       [PMIF_SWINF_1_RDATA_31_0] =     0x0C54,
> +       [PMIF_SWINF_1_VLD_CLR] =        0x0C64,
> +       [PMIF_SWINF_1_STA] =    0x0C68,
> +       [PMIF_SWINF_2_ACC] =    0x0C80,
> +       [PMIF_SWINF_2_WDATA_31_0] =     0x0C84,
> +       [PMIF_SWINF_2_RDATA_31_0] =     0x0C94,
> +       [PMIF_SWINF_2_VLD_CLR] =        0x0CA4,
> +       [PMIF_SWINF_2_STA] =    0x0CA8,
> +       [PMIF_SWINF_3_ACC] =    0x0CC0,
> +       [PMIF_SWINF_3_WDATA_31_0] =     0x0CC4,
> +       [PMIF_SWINF_3_RDATA_31_0] =     0x0CD4,
> +       [PMIF_SWINF_3_VLD_CLR] =        0x0CE4,
> +       [PMIF_SWINF_3_STA] =    0x0CE8,
> +};
> +
> +enum spmi_regs {
> +       SPMI_OP_ST_CTRL,
> +       SPMI_GRP_ID_EN,
> +       SPMI_OP_ST_STA,
> +       SPMI_MST_SAMPL,
> +       SPMI_MST_REQ_EN,
> +       SPMI_REC_CTRL,
> +       SPMI_REC0,
> +       SPMI_REC1,
> +       SPMI_REC2,
> +       SPMI_REC3,
> +       SPMI_REC4,
> +       SPMI_MST_DBG,
> +};
> +
> +static const u32 mt6873_spmi_regs[] = {
> +       [SPMI_OP_ST_CTRL] =     0x0000,
> +       [SPMI_GRP_ID_EN] =      0x0004,
> +       [SPMI_OP_ST_STA] =      0x0008,
> +       [SPMI_MST_SAMPL] =      0x000c,
> +       [SPMI_MST_REQ_EN] =     0x0010,
> +       [SPMI_REC_CTRL] =       0x0040,
> +       [SPMI_REC0] =           0x0044,
> +       [SPMI_REC1] =           0x0048,
> +       [SPMI_REC2] =           0x004c,
> +       [SPMI_REC3] =           0x0050,
> +       [SPMI_REC4] =           0x0054,
> +       [SPMI_MST_DBG] =        0x00fc,
> +};
> +
> +static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
> +{
> +       return readl(arb->base + arb->regs[reg]);
> +}
> +
> +static void pmif_writel(struct pmif *arb, u32 val, enum pmif_regs reg)
> +{
> +       writel(val, arb->base + arb->regs[reg]);
> +}
> +
> +static void mtk_spmi_writel(struct pmif *arb, u32 val, enum spmi_regs reg)
> +{
> +       writel(val, arb->spmimst_base + arb->spmimst_regs[reg]);
> +}
> +
> +static bool pmif_is_fsm_vldclr(struct pmif *arb)
> +{
> +       u32 reg_rdata;
> +
> +       reg_rdata = pmif_readl(arb, arb->chan.ch_sta);
> +       return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR;
> +}
> +
> +static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
> +{
> +       struct pmif *arb = spmi_controller_get_drvdata(ctrl);
> +       u32 rdata, cmd;
> +       int ret;
> +

As highlighted by Fei, do you want to validate sid here?

> +       /* Check the opcode */
> +       if (opc == SPMI_CMD_RESET)
> +               cmd = 0;
> +       else if (opc == SPMI_CMD_SLEEP)
> +               cmd = 1;
> +       else if (opc == SPMI_CMD_SHUTDOWN)
> +               cmd = 2;
> +       else if (opc == SPMI_CMD_WAKEUP)
> +               cmd = 3;

Since these SPMI_CMD_* values are all between 0x10 and 0x13, maybe
this is simpler?

if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
   return -EINVAL;

cmd = opc - SPMI_CMD_RESET;

> +       else
> +               return -EINVAL;
> +
> +       mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL);
> +       ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->spmimst_regs[SPMI_OP_ST_STA],
> +                                       rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY,
> +                                       PMIF_DELAY_US, PMIF_TIMEOUT);
> +       if (ret < 0)
> +               dev_err(&ctrl->dev, "timeout, err = %d\n", ret);
> +
> +       return ret;
> +}
> +
> +static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> +                             u16 addr, u8 *buf, size_t len)
> +{
> +       struct pmif *arb = spmi_controller_get_drvdata(ctrl);
> +       struct ch_reg *inf_reg;
> +       int ret;
> +       u32 data, cmd, bc = len - 1;
> +       unsigned long flags;
> +
> +       /* Check for argument validation. */
> +       if (sid & ~(0xf)) {

nit: No need for parenthesis around 0xf.

> +               dev_err(&ctrl->dev, "exceed the max slv id\n");
> +               return -EINVAL;
> +       }
> +
> +       if (!arb) {
> +               dev_err(&ctrl->dev, "Cannot get pmif control to send cmd\n");
> +               return -EINVAL;
> +       }

I actually don't think you need to validate arb, something is very
wrong if spmi_controller_get_drvdata returns NULL.

> +
> +       inf_reg = &arb->chan;
> +
> +       if (opc >= 0x60 && opc <= 0x7f)
> +               opc = PMIF_CMD_REG;
> +       else if (opc >= 0x20 && opc <= 0x2f)
> +               opc = PMIF_CMD_EXT_REG_LONG;
> +       else if (opc >= 0x38 && opc <= 0x3f)

Merge these 2 if in one statement?

else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f))

> +               opc = PMIF_CMD_EXT_REG_LONG;
> +       else
> +               return -EINVAL;
> +
> +       raw_spin_lock_irqsave(&arb->lock, flags);
> +
> +       /* Wait for Software Interface FSM state to be IDLE. */
> +       ret = readl_poll_timeout_atomic(arb->base + arb->regs[inf_reg->ch_sta],
> +                                       data, GET_SWINF(data) == SWINF_IDLE,
> +                                       PMIF_DELAY_US, PMIF_TIMEOUT);
> +       if (ret < 0) {
> +               /* set channel ready if the data has transferred */
> +               if (pmif_is_fsm_vldclr(arb))
> +                       pmif_writel(arb, 1, inf_reg->ch_rdy);
> +               dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
> +               goto out;
> +       }
> +
> +       /* Send the command. */
> +       cmd = (opc << 30) | (sid << 24) | (bc << 16) | addr;
> +       pmif_writel(arb, cmd, inf_reg->ch_send);
> +
> +       /*
> +        * Wait for Software Interface FSM state to be WFVLDCLR,
> +        * read the data and clear the valid flag.
> +        */
> +       ret = readl_poll_timeout_atomic(arb->base + arb->regs[inf_reg->ch_sta],
> +                                       data, GET_SWINF(data) == SWINF_WFVLDCLR,
> +                                       PMIF_DELAY_US, PMIF_TIMEOUT);
> +       if (ret < 0) {
> +               dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n");
> +               goto out;
> +       }
> +
> +       data = pmif_readl(arb, inf_reg->rdata);
> +       memcpy(buf, &data, (bc & 3) + 1);

What's the "bc & 3" about? Do we also need to validate that len can't be >4?

> +       pmif_writel(arb, 1, inf_reg->ch_rdy);
> +
> +out:
> +       raw_spin_unlock_irqrestore(&arb->lock, flags);
> +       if (ret < 0)
> +               return ret;
> +
> +       return 0;
> +}
> +
> +static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> +                              u16 addr, const u8 *buf, size_t len)
> +{
> +       struct pmif *arb = spmi_controller_get_drvdata(ctrl);
> +       struct ch_reg *inf_reg = NULL;

No need to set to NULL.

> +       int ret;
> +       u32 data, cmd, bc = len - 1;
> +       unsigned long flags = 0;

No need to set to 0.

> +
> +       /* Check for argument validation. */
> +       if (sid & ~(0xf)) {
> +               dev_err(&ctrl->dev, "exceed the max slv id\n");
> +               return -EINVAL;
> +       }
> +
> +       if (!arb) {
> +               dev_err(&ctrl->dev, "Cannot get pmif control to send cmd\n");
> +               return -EINVAL;
> +       }

ditto: no need to validate arb IMHO.

> +
> +       inf_reg = &arb->chan;
> +
> +       /* Check the opcode */
> +       if (opc >= 0x40 && opc <= 0x5F)
> +               opc = PMIF_CMD_REG;
> +       else if (opc <= 0x0F)
> +               opc = PMIF_CMD_EXT_REG_LONG;
> +       else if (opc >= 0x30 && opc <= 0x37)
> +               opc = PMIF_CMD_EXT_REG_LONG;

Ditto about merging these 2.

> +       else if (opc >= 0x80)
> +               opc = PMIF_CMD_REG_0;
> +       else
> +               return -EINVAL;
> +
> +       raw_spin_lock_irqsave(&arb->lock, flags);
> +       /* Wait for Software Interface FSM state to be IDLE. */
> +       ret = readl_poll_timeout_atomic(arb->base + arb->regs[inf_reg->ch_sta],
> +                                       data, GET_SWINF(data) == SWINF_IDLE,
> +                                       PMIF_DELAY_US, PMIF_TIMEOUT);
> +       if (ret < 0) {
> +               /* set channel ready if the data has transferred */
> +               if (pmif_is_fsm_vldclr(arb))
> +                       pmif_writel(arb, 1, inf_reg->ch_rdy);
> +               dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
> +               goto out;
> +       }
> +
> +       /* Set the write data. */
> +       memcpy(&data, buf, (bc & 3) + 1);
> +       pmif_writel(arb, data, inf_reg->wdata);
> +
> +       /* Send the command. */
> +       cmd = (opc << 30) | BIT(29) | (sid << 24) | (bc << 16) | addr;
> +       pmif_writel(arb, cmd, inf_reg->ch_send);
> +out:
> +       raw_spin_unlock_irqrestore(&arb->lock, flags);
> +       if (ret < 0)
> +               return ret;
> +
> +       return 0;
> +}
> +
> +static struct pmif mt6873_pmif_arb[] = {
> +       {
> +               .regs = mt6873_regs,
> +               .spmimst_regs = mt6873_spmi_regs,
> +               .soc_chan = 2,
> +       },
> +};

Why is this an array with one element?

Also, of compatible matches are _usually_ constant, so I think you
should create a structure (e.g. struct pmif_data) with only the
read-only fields.

> +
> +static int mtk_spmi_probe(struct platform_device *pdev)
> +{
> +       struct pmif *arb;
> +       struct spmi_controller *ctrl;
> +       int err;
> +
> +       ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*arb));
> +       if (!ctrl)
> +               return -ENOMEM;
> +
> +       ctrl->cmd = pmif_arb_cmd;
> +       ctrl->read_cmd = pmif_spmi_read_cmd;
> +       ctrl->write_cmd = pmif_spmi_write_cmd;
> +
> +       /* re-assign of_id->data */
> +       spmi_controller_set_drvdata(ctrl, of_device_get_match_data(&pdev->dev));
> +       arb = spmi_controller_get_drvdata(ctrl);
> +       if (!arb) {

This looks wrong. spmi_controller_alloc is already allocating the
private data for you.

So I think you're going to need to change according to my comment
above, and it should look like this:

arb = spmi_controller_get_drvdata(ctrl);
arb->data = of_device_get_match_data(&pdev->dev);

if (!arb->data)

> +               err = -EINVAL;
> +               dev_err(&pdev->dev, "Cannot get pmif control\n");
> +               goto err_put_ctrl;
> +       }
> +
> +       arb->base = devm_platform_ioremap_resource_byname(pdev, "pmif");
> +       if (IS_ERR(arb->base)) {
> +               err = PTR_ERR(arb->base);
> +               dev_err(&pdev->dev, "pmif failed to get the remappped memory\n");
> +               goto err_put_ctrl;
> +       }
> +
> +       arb->spmimst_base = devm_platform_ioremap_resource_byname(pdev, "spmimst");
> +       if (IS_ERR(arb->spmimst_base)) {
> +               err = PTR_ERR(arb->spmimst_base);
> +               dev_err(&pdev->dev, "spmimst failed to get the remappped memory\n");
> +               goto err_put_ctrl;
> +       }
> +
> +       arb->pmif_sys_ck = devm_clk_get(&pdev->dev, "pmif_sys_ck");
> +       if (IS_ERR(arb->pmif_sys_ck)) {
> +               err = PTR_ERR(arb->pmif_sys_ck);
> +               dev_err(&pdev->dev, "failed to get ap clock: %d\n", err);
> +               goto err_put_ctrl;
> +       }
> +
> +       arb->pmif_tmr_ck = devm_clk_get(&pdev->dev, "pmif_tmr_ck");
> +       if (IS_ERR(arb->pmif_tmr_ck)) {
> +               err = PTR_ERR(arb->pmif_tmr_ck);
> +               dev_err(&pdev->dev, "failed to get tmr clock: %d\n", err);
> +               goto err_put_ctrl;
> +       }
> +
> +       arb->spmimst_clk_mux = devm_clk_get(&pdev->dev, "spmimst_clk_mux");
> +       if (IS_ERR(arb->spmimst_clk_mux)) {
> +               err = PTR_ERR(arb->spmimst_clk_mux);
> +               dev_err(&pdev->dev, "failed to get mux: %d\n", err);
> +               goto err_put_ctrl;
> +       }

Since you don't really ever address the clocks individually, can you
consider using devm_clk_bulk_get?

> +
> +       err = clk_prepare_enable(arb->pmif_sys_ck);
> +       if (err) {
> +               dev_err(&pdev->dev, "fail to enable ap clk\n");
> +               goto err_put_ctrl;
> +       }
> +
> +       err = clk_prepare_enable(arb->pmif_tmr_ck);
> +       if (err) {
> +               dev_err(&pdev->dev, "fail to enable tmr clk.\n");
> +               goto err_clk_1;
> +       }
> +
> +       err = clk_prepare_enable(arb->spmimst_clk_mux);
> +       if (err) {
> +               dev_err(&pdev->dev, "fail to enable spmi master clk.\n");
> +               goto err_clk_2;
> +       }

clk_bulk_prepare_enable

> +
> +       arb->chan.ch_sta = PMIF_SWINF_0_STA + (PMIF_CHAN_OFFSET * arb->soc_chan);
> +       arb->chan.wdata = PMIF_SWINF_0_WDATA_31_0 + (PMIF_CHAN_OFFSET * arb->soc_chan);
> +       arb->chan.rdata = PMIF_SWINF_0_RDATA_31_0 + (PMIF_CHAN_OFFSET * arb->soc_chan);
> +       arb->chan.ch_send = PMIF_SWINF_0_ACC + (PMIF_CHAN_OFFSET * arb->soc_chan);
> +       arb->chan.ch_rdy = PMIF_SWINF_0_VLD_CLR + (PMIF_CHAN_OFFSET * arb->soc_chan);
> +
> +       raw_spin_lock_init(&arb->lock);
> +
> +       platform_set_drvdata(pdev, ctrl);
> +
> +       err = spmi_controller_add(ctrl);
> +       if (err)
> +               goto err_domain_remove;
> +
> +       return 0;
> +
> +err_domain_remove:
> +       clk_disable_unprepare(arb->spmimst_clk_mux);
> +err_clk_2:
> +       clk_disable_unprepare(arb->pmif_tmr_ck);
> +err_clk_1:
> +       clk_disable_unprepare(arb->pmif_sys_ck);
> +err_put_ctrl:
> +       spmi_controller_put(ctrl);
> +       return err;
> +}
> +
> +static int mtk_spmi_remove(struct platform_device *pdev)
> +{
> +       struct spmi_controller *ctrl = platform_get_drvdata(pdev);
> +

You probably want to disable the 3 clocks here.


> +       spmi_controller_remove(ctrl);
> +       spmi_controller_put(ctrl);
> +       return 0;
> +}
> +
> +static const struct of_device_id mtk_spmi_match_table[] = {
> +       {
> +               .compatible = "mediatek,mt6873-spmi",
> +               .data = &mt6873_pmif_arb,
> +       }, {
> +               /* sentinel */
> +       },
> +};
> +MODULE_DEVICE_TABLE(of, mtk_spmi_match_table);
> +
> +static struct platform_driver mtk_spmi_driver = {
> +       .driver         = {
> +               .name   = "spmi-mtk",
> +               .of_match_table = of_match_ptr(mtk_spmi_match_table),
> +       },
> +       .probe          = mtk_spmi_probe,
> +       .remove         = mtk_spmi_remove,
> +};
> +module_platform_driver(mtk_spmi_driver);
> +
> +MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
> +MODULE_DESCRIPTION("MediaTek SPMI Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
diff mbox series

Patch

diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index a53bad541f1a..418848840999 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -25,4 +25,13 @@  config SPMI_MSM_PMIC_ARB
 	  This is required for communicating with Qualcomm PMICs and
 	  other devices that have the SPMI interface.
 
+config SPMI_MTK_PMIF
+	tristate "Mediatek SPMI Controller (PMIC Arbiter)"
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in SPMI PMIC Arbiter interface on Mediatek family
+	  processors.
+
+	  This is required for communicating with Mediatek PMICs and
+	  other devices that have the SPMI interface.
 endif
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
index 55a94cadeffe..91f303b96925 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -5,3 +5,4 @@ 
 obj-$(CONFIG_SPMI)	+= spmi.o
 
 obj-$(CONFIG_SPMI_MSM_PMIC_ARB)	+= spmi-pmic-arb.o
+obj-$(CONFIG_SPMI_MTK_PMIF)	+= spmi-mtk-pmif.o
\ No newline at end of file
diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
new file mode 100644
index 000000000000..711d3973800b
--- /dev/null
+++ b/drivers/spmi/spmi-mtk-pmif.c
@@ -0,0 +1,504 @@ 
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 MediaTek Inc.
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/spmi.h>
+
+#define SWINF_IDLE	0x00
+#define SWINF_WFVLDCLR	0x06
+
+#define GET_SWINF(x)	(((x) >> 1) & 0x7)
+
+#define PMIF_CMD_REG_0		0
+#define PMIF_CMD_REG		1
+#define PMIF_CMD_EXT_REG	2
+#define PMIF_CMD_EXT_REG_LONG	3
+
+#define PMIF_DELAY_US   10
+#define PMIF_TIMEOUT    (10 * 1000)
+
+#define PMIF_CHAN_OFFSET 0x5
+
+#define SPMI_OP_ST_BUSY 1
+
+struct ch_reg {
+	u32 ch_sta;
+	u32 wdata;
+	u32 rdata;
+	u32 ch_send;
+	u32 ch_rdy;
+};
+
+struct pmif {
+	void __iomem	*base;
+	const u32	*regs;
+	void __iomem	*spmimst_base;
+	const u32	*spmimst_regs;
+	u32		soc_chan;
+	int		grpid;
+	raw_spinlock_t	lock;
+	struct clk	*pmif_sys_ck;
+	struct clk	*pmif_tmr_ck;
+	struct clk	*spmimst_clk_mux;
+	struct ch_reg	chan;
+};
+
+enum pmif_regs {
+	PMIF_INIT_DONE,
+	PMIF_INF_EN,
+	PMIF_ARB_EN,
+	PMIF_CMDISSUE_EN,
+	PMIF_TIMER_CTRL,
+	PMIF_SPI_MODE_CTRL,
+	PMIF_IRQ_EVENT_EN_0,
+	PMIF_IRQ_FLAG_0,
+	PMIF_IRQ_CLR_0,
+	PMIF_IRQ_EVENT_EN_1,
+	PMIF_IRQ_FLAG_1,
+	PMIF_IRQ_CLR_1,
+	PMIF_IRQ_EVENT_EN_2,
+	PMIF_IRQ_FLAG_2,
+	PMIF_IRQ_CLR_2,
+	PMIF_IRQ_EVENT_EN_3,
+	PMIF_IRQ_FLAG_3,
+	PMIF_IRQ_CLR_3,
+	PMIF_IRQ_EVENT_EN_4,
+	PMIF_IRQ_FLAG_4,
+	PMIF_IRQ_CLR_4,
+	PMIF_WDT_EVENT_EN_0,
+	PMIF_WDT_FLAG_0,
+	PMIF_WDT_EVENT_EN_1,
+	PMIF_WDT_FLAG_1,
+	PMIF_SWINF_0_STA,
+	PMIF_SWINF_0_WDATA_31_0,
+	PMIF_SWINF_0_RDATA_31_0,
+	PMIF_SWINF_0_ACC,
+	PMIF_SWINF_0_VLD_CLR,
+	PMIF_SWINF_1_STA,
+	PMIF_SWINF_1_WDATA_31_0,
+	PMIF_SWINF_1_RDATA_31_0,
+	PMIF_SWINF_1_ACC,
+	PMIF_SWINF_1_VLD_CLR,
+	PMIF_SWINF_2_STA,
+	PMIF_SWINF_2_WDATA_31_0,
+	PMIF_SWINF_2_RDATA_31_0,
+	PMIF_SWINF_2_ACC,
+	PMIF_SWINF_2_VLD_CLR,
+	PMIF_SWINF_3_STA,
+	PMIF_SWINF_3_WDATA_31_0,
+	PMIF_SWINF_3_RDATA_31_0,
+	PMIF_SWINF_3_ACC,
+	PMIF_SWINF_3_VLD_CLR,
+};
+
+static const u32 mt6873_regs[] = {
+	[PMIF_INIT_DONE] =	0x0000,
+	[PMIF_INF_EN] =		0x0024,
+	[PMIF_ARB_EN] =		0x0150,
+	[PMIF_CMDISSUE_EN] =	0x03B4,
+	[PMIF_TIMER_CTRL] =	0x03E0,
+	[PMIF_SPI_MODE_CTRL] =	0x0400,
+	[PMIF_IRQ_EVENT_EN_0] =	0x0418,
+	[PMIF_IRQ_FLAG_0] =	0x0420,
+	[PMIF_IRQ_CLR_0] =	0x0424,
+	[PMIF_IRQ_EVENT_EN_1] =	0x0428,
+	[PMIF_IRQ_FLAG_1] =	0x0430,
+	[PMIF_IRQ_CLR_1] =	0x0434,
+	[PMIF_IRQ_EVENT_EN_2] =	0x0438,
+	[PMIF_IRQ_FLAG_2] =	0x0440,
+	[PMIF_IRQ_CLR_2] =	0x0444,
+	[PMIF_IRQ_EVENT_EN_3] =	0x0448,
+	[PMIF_IRQ_FLAG_3] =	0x0450,
+	[PMIF_IRQ_CLR_3] =	0x0454,
+	[PMIF_IRQ_EVENT_EN_4] =	0x0458,
+	[PMIF_IRQ_FLAG_4] =	0x0460,
+	[PMIF_IRQ_CLR_4] =	0x0464,
+	[PMIF_WDT_EVENT_EN_0] =	0x046C,
+	[PMIF_WDT_FLAG_0] =	0x0470,
+	[PMIF_WDT_EVENT_EN_1] =	0x0474,
+	[PMIF_WDT_FLAG_1] =	0x0478,
+	[PMIF_SWINF_0_ACC] =	0x0C00,
+	[PMIF_SWINF_0_WDATA_31_0] =	0x0C04,
+	[PMIF_SWINF_0_RDATA_31_0] =	0x0C14,
+	[PMIF_SWINF_0_VLD_CLR] =	0x0C24,
+	[PMIF_SWINF_0_STA] =	0x0C28,
+	[PMIF_SWINF_1_ACC] =	0x0C40,
+	[PMIF_SWINF_1_WDATA_31_0] =	0x0C44,
+	[PMIF_SWINF_1_RDATA_31_0] =	0x0C54,
+	[PMIF_SWINF_1_VLD_CLR] =	0x0C64,
+	[PMIF_SWINF_1_STA] =	0x0C68,
+	[PMIF_SWINF_2_ACC] =	0x0C80,
+	[PMIF_SWINF_2_WDATA_31_0] =	0x0C84,
+	[PMIF_SWINF_2_RDATA_31_0] =	0x0C94,
+	[PMIF_SWINF_2_VLD_CLR] =	0x0CA4,
+	[PMIF_SWINF_2_STA] =	0x0CA8,
+	[PMIF_SWINF_3_ACC] =	0x0CC0,
+	[PMIF_SWINF_3_WDATA_31_0] =	0x0CC4,
+	[PMIF_SWINF_3_RDATA_31_0] =	0x0CD4,
+	[PMIF_SWINF_3_VLD_CLR] =	0x0CE4,
+	[PMIF_SWINF_3_STA] =	0x0CE8,
+};
+
+enum spmi_regs {
+	SPMI_OP_ST_CTRL,
+	SPMI_GRP_ID_EN,
+	SPMI_OP_ST_STA,
+	SPMI_MST_SAMPL,
+	SPMI_MST_REQ_EN,
+	SPMI_REC_CTRL,
+	SPMI_REC0,
+	SPMI_REC1,
+	SPMI_REC2,
+	SPMI_REC3,
+	SPMI_REC4,
+	SPMI_MST_DBG,
+};
+
+static const u32 mt6873_spmi_regs[] = {
+	[SPMI_OP_ST_CTRL] =	0x0000,
+	[SPMI_GRP_ID_EN] =	0x0004,
+	[SPMI_OP_ST_STA] =	0x0008,
+	[SPMI_MST_SAMPL] =	0x000c,
+	[SPMI_MST_REQ_EN] =	0x0010,
+	[SPMI_REC_CTRL] =	0x0040,
+	[SPMI_REC0] =		0x0044,
+	[SPMI_REC1] =		0x0048,
+	[SPMI_REC2] =		0x004c,
+	[SPMI_REC3] =		0x0050,
+	[SPMI_REC4] =		0x0054,
+	[SPMI_MST_DBG] =	0x00fc,
+};
+
+static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
+{
+	return readl(arb->base + arb->regs[reg]);
+}
+
+static void pmif_writel(struct pmif *arb, u32 val, enum pmif_regs reg)
+{
+	writel(val, arb->base + arb->regs[reg]);
+}
+
+static void mtk_spmi_writel(struct pmif *arb, u32 val, enum spmi_regs reg)
+{
+	writel(val, arb->spmimst_base + arb->spmimst_regs[reg]);
+}
+
+static bool pmif_is_fsm_vldclr(struct pmif *arb)
+{
+	u32 reg_rdata;
+
+	reg_rdata = pmif_readl(arb, arb->chan.ch_sta);
+	return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR;
+}
+
+static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
+{
+	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+	u32 rdata, cmd;
+	int ret;
+
+	/* Check the opcode */
+	if (opc == SPMI_CMD_RESET)
+		cmd = 0;
+	else if (opc == SPMI_CMD_SLEEP)
+		cmd = 1;
+	else if (opc == SPMI_CMD_SHUTDOWN)
+		cmd = 2;
+	else if (opc == SPMI_CMD_WAKEUP)
+		cmd = 3;
+	else
+		return -EINVAL;
+
+	mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL);
+	ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->spmimst_regs[SPMI_OP_ST_STA],
+					rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY,
+					PMIF_DELAY_US, PMIF_TIMEOUT);
+	if (ret < 0)
+		dev_err(&ctrl->dev, "timeout, err = %d\n", ret);
+
+	return ret;
+}
+
+static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+			      u16 addr, u8 *buf, size_t len)
+{
+	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+	struct ch_reg *inf_reg;
+	int ret;
+	u32 data, cmd, bc = len - 1;
+	unsigned long flags;
+
+	/* Check for argument validation. */
+	if (sid & ~(0xf)) {
+		dev_err(&ctrl->dev, "exceed the max slv id\n");
+		return -EINVAL;
+	}
+
+	if (!arb) {
+		dev_err(&ctrl->dev, "Cannot get pmif control to send cmd\n");
+		return -EINVAL;
+	}
+
+	inf_reg = &arb->chan;
+
+	if (opc >= 0x60 && opc <= 0x7f)
+		opc = PMIF_CMD_REG;
+	else if (opc >= 0x20 && opc <= 0x2f)
+		opc = PMIF_CMD_EXT_REG_LONG;
+	else if (opc >= 0x38 && opc <= 0x3f)
+		opc = PMIF_CMD_EXT_REG_LONG;
+	else
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&arb->lock, flags);
+
+	/* Wait for Software Interface FSM state to be IDLE. */
+	ret = readl_poll_timeout_atomic(arb->base + arb->regs[inf_reg->ch_sta],
+					data, GET_SWINF(data) == SWINF_IDLE,
+					PMIF_DELAY_US, PMIF_TIMEOUT);
+	if (ret < 0) {
+		/* set channel ready if the data has transferred */
+		if (pmif_is_fsm_vldclr(arb))
+			pmif_writel(arb, 1, inf_reg->ch_rdy);
+		dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+		goto out;
+	}
+
+	/* Send the command. */
+	cmd = (opc << 30) | (sid << 24) | (bc << 16) | addr;
+	pmif_writel(arb, cmd, inf_reg->ch_send);
+
+	/*
+	 * Wait for Software Interface FSM state to be WFVLDCLR,
+	 * read the data and clear the valid flag.
+	 */
+	ret = readl_poll_timeout_atomic(arb->base + arb->regs[inf_reg->ch_sta],
+					data, GET_SWINF(data) == SWINF_WFVLDCLR,
+					PMIF_DELAY_US, PMIF_TIMEOUT);
+	if (ret < 0) {
+		dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n");
+		goto out;
+	}
+
+	data = pmif_readl(arb, inf_reg->rdata);
+	memcpy(buf, &data, (bc & 3) + 1);
+	pmif_writel(arb, 1, inf_reg->ch_rdy);
+
+out:
+	raw_spin_unlock_irqrestore(&arb->lock, flags);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+			       u16 addr, const u8 *buf, size_t len)
+{
+	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+	struct ch_reg *inf_reg = NULL;
+	int ret;
+	u32 data, cmd, bc = len - 1;
+	unsigned long flags = 0;
+
+	/* Check for argument validation. */
+	if (sid & ~(0xf)) {
+		dev_err(&ctrl->dev, "exceed the max slv id\n");
+		return -EINVAL;
+	}
+
+	if (!arb) {
+		dev_err(&ctrl->dev, "Cannot get pmif control to send cmd\n");
+		return -EINVAL;
+	}
+
+	inf_reg = &arb->chan;
+
+	/* Check the opcode */
+	if (opc >= 0x40 && opc <= 0x5F)
+		opc = PMIF_CMD_REG;
+	else if (opc <= 0x0F)
+		opc = PMIF_CMD_EXT_REG_LONG;
+	else if (opc >= 0x30 && opc <= 0x37)
+		opc = PMIF_CMD_EXT_REG_LONG;
+	else if (opc >= 0x80)
+		opc = PMIF_CMD_REG_0;
+	else
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&arb->lock, flags);
+	/* Wait for Software Interface FSM state to be IDLE. */
+	ret = readl_poll_timeout_atomic(arb->base + arb->regs[inf_reg->ch_sta],
+					data, GET_SWINF(data) == SWINF_IDLE,
+					PMIF_DELAY_US, PMIF_TIMEOUT);
+	if (ret < 0) {
+		/* set channel ready if the data has transferred */
+		if (pmif_is_fsm_vldclr(arb))
+			pmif_writel(arb, 1, inf_reg->ch_rdy);
+		dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+		goto out;
+	}
+
+	/* Set the write data. */
+	memcpy(&data, buf, (bc & 3) + 1);
+	pmif_writel(arb, data, inf_reg->wdata);
+
+	/* Send the command. */
+	cmd = (opc << 30) | BIT(29) | (sid << 24) | (bc << 16) | addr;
+	pmif_writel(arb, cmd, inf_reg->ch_send);
+out:
+	raw_spin_unlock_irqrestore(&arb->lock, flags);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct pmif mt6873_pmif_arb[] = {
+	{
+		.regs = mt6873_regs,
+		.spmimst_regs = mt6873_spmi_regs,
+		.soc_chan = 2,
+	},
+};
+
+static int mtk_spmi_probe(struct platform_device *pdev)
+{
+	struct pmif *arb;
+	struct spmi_controller *ctrl;
+	int err;
+
+	ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*arb));
+	if (!ctrl)
+		return -ENOMEM;
+
+	ctrl->cmd = pmif_arb_cmd;
+	ctrl->read_cmd = pmif_spmi_read_cmd;
+	ctrl->write_cmd = pmif_spmi_write_cmd;
+
+	/* re-assign of_id->data */
+	spmi_controller_set_drvdata(ctrl, of_device_get_match_data(&pdev->dev));
+	arb = spmi_controller_get_drvdata(ctrl);
+	if (!arb) {
+		err = -EINVAL;
+		dev_err(&pdev->dev, "Cannot get pmif control\n");
+		goto err_put_ctrl;
+	}
+
+	arb->base = devm_platform_ioremap_resource_byname(pdev, "pmif");
+	if (IS_ERR(arb->base)) {
+		err = PTR_ERR(arb->base);
+		dev_err(&pdev->dev, "pmif failed to get the remappped memory\n");
+		goto err_put_ctrl;
+	}
+
+	arb->spmimst_base = devm_platform_ioremap_resource_byname(pdev, "spmimst");
+	if (IS_ERR(arb->spmimst_base)) {
+		err = PTR_ERR(arb->spmimst_base);
+		dev_err(&pdev->dev, "spmimst failed to get the remappped memory\n");
+		goto err_put_ctrl;
+	}
+
+	arb->pmif_sys_ck = devm_clk_get(&pdev->dev, "pmif_sys_ck");
+	if (IS_ERR(arb->pmif_sys_ck)) {
+		err = PTR_ERR(arb->pmif_sys_ck);
+		dev_err(&pdev->dev, "failed to get ap clock: %d\n", err);
+		goto err_put_ctrl;
+	}
+
+	arb->pmif_tmr_ck = devm_clk_get(&pdev->dev, "pmif_tmr_ck");
+	if (IS_ERR(arb->pmif_tmr_ck)) {
+		err = PTR_ERR(arb->pmif_tmr_ck);
+		dev_err(&pdev->dev, "failed to get tmr clock: %d\n", err);
+		goto err_put_ctrl;
+	}
+
+	arb->spmimst_clk_mux = devm_clk_get(&pdev->dev, "spmimst_clk_mux");
+	if (IS_ERR(arb->spmimst_clk_mux)) {
+		err = PTR_ERR(arb->spmimst_clk_mux);
+		dev_err(&pdev->dev, "failed to get mux: %d\n", err);
+		goto err_put_ctrl;
+	}
+
+	err = clk_prepare_enable(arb->pmif_sys_ck);
+	if (err) {
+		dev_err(&pdev->dev, "fail to enable ap clk\n");
+		goto err_put_ctrl;
+	}
+
+	err = clk_prepare_enable(arb->pmif_tmr_ck);
+	if (err) {
+		dev_err(&pdev->dev, "fail to enable tmr clk.\n");
+		goto err_clk_1;
+	}
+
+	err = clk_prepare_enable(arb->spmimst_clk_mux);
+	if (err) {
+		dev_err(&pdev->dev, "fail to enable spmi master clk.\n");
+		goto err_clk_2;
+	}
+
+	arb->chan.ch_sta = PMIF_SWINF_0_STA + (PMIF_CHAN_OFFSET * arb->soc_chan);
+	arb->chan.wdata = PMIF_SWINF_0_WDATA_31_0 + (PMIF_CHAN_OFFSET * arb->soc_chan);
+	arb->chan.rdata = PMIF_SWINF_0_RDATA_31_0 + (PMIF_CHAN_OFFSET * arb->soc_chan);
+	arb->chan.ch_send = PMIF_SWINF_0_ACC + (PMIF_CHAN_OFFSET * arb->soc_chan);
+	arb->chan.ch_rdy = PMIF_SWINF_0_VLD_CLR + (PMIF_CHAN_OFFSET * arb->soc_chan);
+
+	raw_spin_lock_init(&arb->lock);
+
+	platform_set_drvdata(pdev, ctrl);
+
+	err = spmi_controller_add(ctrl);
+	if (err)
+		goto err_domain_remove;
+
+	return 0;
+
+err_domain_remove:
+	clk_disable_unprepare(arb->spmimst_clk_mux);
+err_clk_2:
+	clk_disable_unprepare(arb->pmif_tmr_ck);
+err_clk_1:
+	clk_disable_unprepare(arb->pmif_sys_ck);
+err_put_ctrl:
+	spmi_controller_put(ctrl);
+	return err;
+}
+
+static int mtk_spmi_remove(struct platform_device *pdev)
+{
+	struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+
+	spmi_controller_remove(ctrl);
+	spmi_controller_put(ctrl);
+	return 0;
+}
+
+static const struct of_device_id mtk_spmi_match_table[] = {
+	{
+		.compatible = "mediatek,mt6873-spmi",
+		.data = &mt6873_pmif_arb,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, mtk_spmi_match_table);
+
+static struct platform_driver mtk_spmi_driver = {
+	.driver		= {
+		.name	= "spmi-mtk",
+		.of_match_table = of_match_ptr(mtk_spmi_match_table),
+	},
+	.probe		= mtk_spmi_probe,
+	.remove		= mtk_spmi_remove,
+};
+module_platform_driver(mtk_spmi_driver);
+
+MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SPMI Driver");
+MODULE_LICENSE("GPL");