| Message ID | 1b467e9c9ae580f7a555c42493b95029223b18e8.1623315732.git.geert+renesas@glider.be |
|---|---|
| State | Superseded |
| Headers | show |
| Series | arm64: renesas: Add support for R Car H3e 2G-and M3e-2G | expand |
Hi Geert, Thank you for the patch. On Thu, Jun 10, 2021 at 11:37:23AM +0200, Geert Uytterhoeven wrote: > Add support for the Renesas Salvator-X 2nd version development > board equipped with an R-Car M3e-2G SiP. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > arch/arm64/boot/dts/renesas/Makefile | 2 + > .../boot/dts/renesas/r8a779m3-salvator-xs.dts | 46 +++++++++++++++++++ > 2 files changed, 48 insertions(+) > create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts > > diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile > index 4fa0d56602684faf..6a1061824a9f29f0 100644 > --- a/arch/arm64/boot/dts/renesas/Makefile > +++ b/arch/arm64/boot/dts/renesas/Makefile > @@ -66,3 +66,5 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb > dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb > dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb > dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb > + > +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb Same comment as or 07/14 regarding alphabetical ordering. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts > new file mode 100644 > index 0000000000000000..4ab26fd7233d62fc > --- /dev/null > +++ b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts > @@ -0,0 +1,46 @@ > +// SPDX-License-Identifier: (GPL-2.0 or MIT) > +/* > + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G > + * > + * Copyright (C) 2021 Glider bv > + * > + * Based on r8a77961-salvator-xs.dts > + * Copyright (C) 2018 Renesas Electronics Corp. > + */ > + > +/dts-v1/; > +#include "r8a779m3.dtsi" > +#include "salvator-xs.dtsi" > + > +/ { > + model = "Renesas Salvator-X 2nd version board based on r8a779m3"; > + compatible = "renesas,salvator-xs", "renesas,r8a779m3", > + "renesas,r8a77961"; > + > + memory@48000000 { > + device_type = "memory"; > + /* first 128MB is reserved for secure area. */ > + reg = <0x0 0x48000000 0x0 0x78000000>; > + }; > + > + memory@480000000 { > + device_type = "memory"; > + reg = <0x4 0x80000000 0x0 0x80000000>; > + }; > + > + memory@600000000 { > + device_type = "memory"; > + reg = <0x6 0x00000000 0x1 0x00000000>; > + }; > +}; > + > +&du { > + clocks = <&cpg CPG_MOD 724>, > + <&cpg CPG_MOD 723>, > + <&cpg CPG_MOD 722>, > + <&versaclock6 1>, > + <&x21_clk>, > + <&versaclock6 2>; > + clock-names = "du.0", "du.1", "du.2", > + "dclkin.0", "dclkin.1", "dclkin.2"; > +}; -- Regards, Laurent Pinchart
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 4fa0d56602684faf..6a1061824a9f29f0 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -66,3 +66,5 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb + +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts new file mode 100644 index 0000000000000000..4ab26fd7233d62fc --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: (GPL-2.0 or MIT) +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G + * + * Copyright (C) 2021 Glider bv + * + * Based on r8a77961-salvator-xs.dts + * Copyright (C) 2018 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a779m3.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a779m3"; + compatible = "renesas,salvator-xs", "renesas,r8a779m3", + "renesas,r8a77961"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x1 0x00000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock6 1>, + <&x21_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +};
Add support for the Renesas Salvator-X 2nd version development board equipped with an R-Car M3e-2G SiP. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm64/boot/dts/renesas/Makefile | 2 + .../boot/dts/renesas/r8a779m3-salvator-xs.dts | 46 +++++++++++++++++++ 2 files changed, 48 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts