diff mbox series

[09/15] net: phy: delay PHY driver probe until PHY registration

Message ID 20200622093744.13685-10-brgl@bgdev.pl
State New
Headers show
Series [01/15] net: phy: arrange headers in mdio_bus.c alphabetically | expand

Commit Message

Bartosz Golaszewski June 22, 2020, 9:37 a.m. UTC
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

Currently the PHY ID is read without taking the PHY out of reset. This
can only work if no resets are defined. This change delays the ID read
until we're actually registering the PHY device - this is needed because
earlier (when creating the device) we don't have a struct device yet
with resets already configured.

While we could use the of_ helpers for GPIO and resets, we will be adding
PHY regulator support layer on and there are no regulator APIs that work
without struct device.

This means that phy_device_create() now only instantiates the device but
doesn't request the relevant driver. If no phy_id is passed to
phy_device_create() (for that we introduce a new define: PHY_ID_NONE)
then the ID will be read inside phy_device_register().

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
 drivers/net/phy/phy_device.c | 47 +++++++++++++++++++-----------------
 include/linux/phy.h          |  1 +
 2 files changed, 26 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index eccbf6aea63d..94944fffa9bb 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -658,12 +658,6 @@  struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
 	INIT_DELAYED_WORK(&dev->state_queue, phy_state_machine);
 	device_initialize(&mdiodev->dev);
 
-	ret = phy_request_driver_module(dev);
-	if (ret) {
-		phy_device_free(dev);
-		dev = ERR_PTR(ret);
-	}
-
 	return dev;
 }
 EXPORT_SYMBOL(phy_device_create);
@@ -813,30 +807,29 @@  static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id,
 	return 0;
 }
 
+static int phy_device_read_id(struct phy_device *phydev)
+{
+	struct mdio_device *mdiodev = &phydev->mdio;
+
+	phydev->c45_ids.devices_in_package = 0;
+	memset(phydev->c45_ids.device_ids, 0xff,
+	       sizeof(phydev->c45_ids.device_ids));
+
+	return get_phy_id(mdiodev->bus, mdiodev->addr, &phydev->phy_id,
+			  phydev->is_c45, &phydev->c45_ids);
+}
+
 /**
- * get_phy_device - reads the specified PHY device and returns its @phy_device
- *		    struct
+ * get_phy_device - create a phy_device withoug PHY ID
  * @bus: the target MII bus
  * @addr: PHY address on the MII bus
  * @is_c45: If true the PHY uses the 802.3 clause 45 protocol
  *
- * Description: Reads the ID registers of the PHY at @addr on the
- *   @bus, then allocates and returns the phy_device to represent it.
+ * Allocates a new phy_device for @addr on the @bus.
  */
 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 {
-	struct phy_c45_device_ids c45_ids;
-	u32 phy_id = 0;
-	int r;
-
-	c45_ids.devices_in_package = 0;
-	memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids));
-
-	r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
-	if (r)
-		return ERR_PTR(r);
-
-	return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
+	return phy_device_create(bus, addr, PHY_ID_NONE, is_c45, NULL);
 }
 EXPORT_SYMBOL(get_phy_device);
 
@@ -855,6 +848,16 @@  int phy_device_register(struct phy_device *phydev)
 	/* Deassert the reset signal */
 	phy_device_reset(phydev, 0);
 
+	if (phydev->phy_id == PHY_ID_NONE) {
+		err = phy_device_read_id(phydev);
+		if (err)
+			goto err_unregister_mdio;
+	}
+
+	err = phy_request_driver_module(phydev);
+	if (err)
+		goto err_unregister_mdio;
+
 	/* Run all of the fixups for this PHY */
 	err = phy_scan_fixups(phydev);
 	if (err) {
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 8c05d0fb5c00..2a695cd90c7c 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -742,6 +742,7 @@  struct phy_driver {
 
 #define PHY_ANY_ID "MATCH ANY PHY"
 #define PHY_ANY_UID 0xffffffff
+#define PHY_ID_NONE 0
 
 #define PHY_ID_MATCH_EXACT(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 0)
 #define PHY_ID_MATCH_MODEL(id) .phy_id = (id), .phy_id_mask = GENMASK(31, 4)