diff mbox series

[v29,13/16] leds: lp5523: Update the lp5523 code to add multicolor brightness function

Message ID 20200622185919.2131-14-dmurphy@ti.com
State Superseded
Headers show
Series Multicolor Framework v29 | expand

Commit Message

Dan Murphy June 22, 2020, 6:59 p.m. UTC 
Add the multicolor brightness call back to support the multicolor
framework.  This call back allows setting  brightness on grouped channels
in a single function.

Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 drivers/leds/leds-lp5523.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

Comments

Pavel Machek July 11, 2020, 3:57 p.m. UTC | #1 
Hi!

> Add the multicolor brightness call back to support the multicolor

> framework.  This call back allows setting  brightness on grouped channels


Extra space before "brightness".

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
diff mbox series

Patch

diff --git a/drivers/leds/leds-lp5523.c b/drivers/leds/leds-lp5523.c
index b076c16df9ab..9776dc72a764 100644
--- a/drivers/leds/leds-lp5523.c
+++ b/drivers/leds/leds-lp5523.c
@@ -791,6 +791,25 @@  static ssize_t store_master_fader_leds(struct device *dev,
 	return ret;
 }
 
+static int lp5523_multicolor_brightness(struct lp55xx_led *led)
+{
+	struct lp55xx_chip *chip = led->chip;
+	int ret;
+	int i;
+
+	mutex_lock(&chip->lock);
+	for (i = 0; i < led->mc_cdev.num_colors; i++) {
+		ret = lp55xx_write(chip,
+				   LP5523_REG_LED_PWM_BASE +
+				   led->mc_cdev.subled_info[i].channel,
+				   led->mc_cdev.subled_info[i].brightness);
+		if (ret)
+			break;
+	}
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
 static int lp5523_led_brightness(struct lp55xx_led *led)
 {
 	struct lp55xx_chip *chip = led->chip;
@@ -857,6 +876,7 @@  static struct lp55xx_device_config lp5523_cfg = {
 	.max_channel  = LP5523_MAX_LEDS,
 	.post_init_device   = lp5523_post_init_device,
 	.brightness_fn      = lp5523_led_brightness,
+	.multicolor_brightness_fn = lp5523_multicolor_brightness,
 	.set_led_current    = lp5523_set_led_current,
 	.firmware_cb        = lp5523_firmware_loaded,
 	.run_engine         = lp5523_run_engine,