From patchwork Sat Sep 5 17:29:59 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jonathan Cameron X-Patchwork-Id: 249168 Delivered-To: patch@linaro.org Received: by 2002:a92:5b9c:0:0:0:0:0 with SMTP id c28csp2420797ilg; Sat, 5 Sep 2020 10:32:55 -0700 (PDT) X-Google-Smtp-Source: ABdhPJxZsbo8t4WlT5Uj+Vm7laAhkWH2GcNj73DEuuGnjKkP2gFsWq/r6msURmJ+EICol1V9Dn+8 X-Received: by 2002:a17:906:7248:: with SMTP id n8mr2480166ejk.160.1599327175318; Sat, 05 Sep 2020 10:32:55 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1599327175; cv=none; d=google.com; s=arc-20160816; b=XbAhc6+f90zIM735/sIerKKj7KrNUBHX3HpUPC+q37AXCV/mtmqF/slhX+TiH5xCju dwStTK4kZ5cPAO/HGWw4jmUJ/pUOSXvgpr/xEDCzBCAvJg0MqalquzHn+od7It6i9Jwd aivvGmEjaUi9/yUK45mG/RY4WA+Svynj8J9uhDLDbjdAebc02rJE1Cp/iVv0YU+5JurC tCAcWzFQXsYnLGOJth7JeUQ8va9N0oe7q7yGEljmh/2byzYWyKtPtj9mq3aVTsHrvGKb Yhhs8IxkZLl6maJAhdGQaAUbn8UWkfKOSXAtz+paYrm3THJYzaPfIpZA8fLhdapz76PM 0h1g== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=DvZD2Ciyf1YBeS++iPP6gQejRdV2JEKevwLMMYDAA5M=; b=JT3//3J1rqs/jHKZkpHSA4TEE0xZp13XpAm6FuEVaaD2MkzPJfSoS2fle9WrvdkG4A RuWPPg3HEkrN70WN5PyN/wq3s2rynRUKBYBxmdx7f3UOJfTC4k+cPBNkfMtpvz0EZdTi s7xGlobgz4cxTfvMGyxVvh1p79R1gEOnIUS5oTMCqUYtDZNHyZbcOd36xDGpR9vowtbz ljqsdUfETflS1HwF6X8ev3vElDpeDaq5ta2FcHpIUYoKXFoa1bvD+McgHmwbft12Xg4M rYcWmnhlmWvOf45zHdq9hVauL7cxLXKCrUIMD9T0QDP0uoCHtbsfCVm94RsG4Bdrqdne QKdw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@kernel.org header.s=default header.b=TS58A5x4; spf=pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id u17si5687486ejk.29.2020.09.05.10.32.55; Sat, 05 Sep 2020 10:32:55 -0700 (PDT) Received-SPF: pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=default header.b=TS58A5x4; spf=pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728494AbgIERcw (ORCPT + 6 others); Sat, 5 Sep 2020 13:32:52 -0400 Received: from mail.kernel.org ([198.145.29.99]:60488 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728473AbgIERcs (ORCPT ); Sat, 5 Sep 2020 13:32:48 -0400 Received: from localhost.localdomain (cpc149474-cmbg20-2-0-cust94.5-4.cable.virginm.net [82.4.196.95]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPSA id E6D292078E; Sat, 5 Sep 2020 17:32:46 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=default; t=1599327168; bh=RBeBn26VqXSvtc29tYTwUVWtUqRK71pOOETdakTP+Z0=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=TS58A5x4T3xwdFaeBWIKcP60Y235hLXXvwtgnhMWl+0cgdR7jS3dKaO+7DdcGtMnX gQtDzPADQ9oH1VdBAsXNGbOtRGf2dFN+Kt/BvQKsvFRQqVgRwIvZhhZHxqoj3pssJr bOvUmOnuaAcQqxdWn8q3RDDuescuv2Ed3Cg4o3K4= From: Jonathan Cameron To: linux-iio@vger.kernel.org, Rob Herring , devicetree@vger.kernel.org Cc: Jonathan Cameron , Stefan Popa Subject: [PATCH 15/20] dt-bindings:iio:adc:ad7768-1 yaml conversion Date: Sat, 5 Sep 2020 18:29:59 +0100 Message-Id: <20200905173004.216081-16-jic23@kernel.org> X-Mailer: git-send-email 2.28.0 In-Reply-To: <20200905173004.216081-1-jic23@kernel.org> References: <20200905173004.216081-1-jic23@kernel.org> MIME-Version: 1.0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Jonathan Cameron Fairly straight conversion. The one oddity in the original binding is that spi-cpha and spi-cpol were not marked as required, but were in the example. Looking at the datasheet, there isn't any documented flexibility in the possible SPI modes, so I have moved these to requires. For spi-max-frequency I have gone the other way. I absolutely agree that it is good to specify this in the dt-binding, but it's not strictly required. Signed-off-by: Jonathan Cameron Cc: Stefan Popa --- .../bindings/iio/adc/adi,ad7768-1.txt | 41 --------- .../bindings/iio/adc/adi,ad7768-1.yaml | 89 +++++++++++++++++++ 2 files changed, 89 insertions(+), 41 deletions(-) -- 2.28.0 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt deleted file mode 100644 index 9f5b88cf680d..000000000000 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.txt +++ /dev/null @@ -1,41 +0,0 @@ -Analog Devices AD7768-1 ADC device driver - -Required properties for the AD7768-1: - -- compatible: Must be "adi,ad7768-1" -- reg: SPI chip select number for the device -- spi-max-frequency: Max SPI frequency to use - see: Documentation/devicetree/bindings/spi/spi-bus.txt -- clocks: phandle to the master clock (mclk) - see: Documentation/devicetree/bindings/clock/clock-bindings.txt -- clock-names: Must be "mclk". -- interrupts: IRQ line for the ADC - see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- vref-supply: vref supply can be used as reference for conversion -- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables - synchronization of multiple devices that require simultaneous sampling. - A pulse is always required if the configuration is changed in any way, for example - if the filter decimation rate changes. As the line is active low, it should - be marked GPIO_ACTIVE_LOW. - -Optional properties: - - - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during - driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW. - -Example: - - adc@0 { - compatible = "adi,ad7768-1"; - reg = <0>; - spi-max-frequency = <2000000>; - spi-cpol; - spi-cpha; - vref-supply = <&adc_vref>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpio>; - adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; - clocks = <&ad7768_mclk>; - clock-names = "mclk"; - }; diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml new file mode 100644 index 000000000000..a2c559d0c947 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD7768-1 ADC device driver + +maintainers: + - Stefan Popa + +description: | + Datasheet at: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf + +properties: + compatible: + const: adi,ad7768-1 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: mclk + + interrupts: + maxItems: 1 + + vref-supply: + description: + ADC reference voltage supply + + adi,sync-in-gpios: + description: + Enables synchronization of multiple devices that require simultaneous + sampling. A pulse is always required if the configuration is changed + in any way, for example if the filter decimation rate changes. + As the line is active low, it should be marked GPIO_ACTIVE_LOW. + + reset-gpios: + maxItems: 1 + + spi-max-frequency: true + + spi-cpol: true + spi-cpha : true + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - vref-supply + - spi-cpol + - spi-cpha + - adi,sync-in-gpios + +additionalProperties: false + +examples: + - | + #include + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7768-1"; + reg = <0>; + spi-max-frequency = <2000000>; + spi-cpol; + spi-cpha; + vref-supply = <&adc_vref>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + clocks = <&ad7768_mclk>; + clock-names = "mclk"; + }; + }; +...