deleted file mode 100644
@@ -1,25 +0,0 @@
-* Texas Instruments OPT3001 Ambient Light Sensor
-
-The driver supports interrupt-driven and interrupt-less operation, depending
-on whether an interrupt property has been populated into the DT. Note that
-the optional generation of IIO events on rising/falling light threshold changes
-requires the use of interrupts. Without interrupts, only the simple reading
-of the current light value is supported through the IIO API.
-
-https://www.ti.com/product/opt3001
-
-Required properties:
- - compatible: should be "ti,opt3001"
- - reg: the I2C address of the sensor
-
-Optional properties:
- - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge)
-
-Example:
-
-opt3001@44 {
- compatible = "ti,opt3001";
- reg = <0x44>;
- interrupt-parent = <&gpio1>;
- interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
-};
new file mode 100644
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/light/ti,opt3001.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments OPT3001 Ambient Light Sensor
+
+maintainers:
+ - Andreas Dannenberg <dannenberg@ti.com>
+
+description: |
+ The device supports interrupt-driven and interrupt-less operation, depending
+ on whether an interrupt property has been populated into the DT.
+
+properties:
+ compatible:
+ const: ti,opt3001
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: Should be configured with type IRQ_TYPE_EDGE_FALLING
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ light-sensor@44 {
+ compatible = "ti,opt3001";
+ reg = <0x44>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+...