@@ -56,7 +56,7 @@ config SOC_CANAAN_K210_DTB_SOURCE
string "Source file for the Canaan Kendryte K210 builtin DTB"
depends on SOC_CANAAN
depends on SOC_CANAAN_K210_DTB_BUILTIN
- default "k210"
+ default "k210_generic"
help
Base name (without suffix, relative to arch/riscv/boot/dts/canaan)
for the DTS file that will be used to produce the DTB linked into the
deleted file mode 100644
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2020 Western Digital Corporation or its affiliates.
- */
-
-/dts-v1/;
-
-#include "k210.dtsi"
-
-/ {
- model = "Kendryte K210 generic";
- compatible = "kendryte,k210";
-
- chosen {
- bootargs = "earlycon console=ttySIF0";
- stdout-path = "serial0";
- };
-};
-
-&uarths0 {
- status = "okay";
-};
-
@@ -1,9 +1,11 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
* Copyright (C) 2020 Western Digital Corporation or its affiliates.
*/
#include <dt-bindings/clock/k210-clk.h>
+#include <dt-bindings/pinctrl/k210-fpioa.h>
+#include <dt-bindings/reset/k210-rst.h>
/ {
/*
@@ -12,10 +14,29 @@ / {
*/
#address-cells = <1>;
#size-cells = <1>;
- compatible = "kendryte,k210";
+ compatible = "canaan,kendryte-k210";
aliases {
+ cpu0 = &cpu0;
+ cpu1 = &cpu1;
+ dma0 = &dmac0;
+ gpio0 = &gpio0;
+ gpio1 = &gpio1_0;
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ pinctrl0 = &fpioa;
serial0 = &uarths0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ spi0 = &spi0;
+ spi1 = &spi1;
+ spi2 = &spi2;
+ spi3 = &spi3;
+ timer0 = &timer0;
+ timer1 = &timer1;
+ timer2 = &timer2;
};
/*
@@ -30,16 +51,15 @@ cpus {
timebase-frequency = <7800000>;
cpu0: cpu@0 {
device_type = "cpu";
+ compatible = "canaan,k210", "sifive,rocket0", "riscv";
reg = <0>;
- compatible = "kendryte,k210", "sifive,rocket0", "riscv";
- riscv,isa = "rv64imafdc";
+ riscv,isa = "rv64imafdgc";
mmu-type = "none";
- i-cache-size = <0x8000>;
i-cache-block-size = <64>;
- d-cache-size = <0x8000>;
+ i-cache-size = <0x8000>;
d-cache-block-size = <64>;
- clocks = <&sysctl K210_CLK_CPU>;
- clock-frequency = <390000000>;
+ d-cache-size = <0x8000>;
+ clocks = <&sysclk K210_CLK_CPU>;
cpu0_intc: interrupt-controller {
#interrupt-cells = <1>;
interrupt-controller;
@@ -48,16 +68,15 @@ cpu0_intc: interrupt-controller {
};
cpu1: cpu@1 {
device_type = "cpu";
+ compatible = "canaan,k210", "sifive,rocket0", "riscv";
reg = <1>;
- compatible = "kendryte,k210", "sifive,rocket0", "riscv";
- riscv,isa = "rv64imafdc";
+ riscv,isa = "rv64imafdgc";
mmu-type = "none";
- i-cache-size = <0x8000>;
i-cache-block-size = <64>;
- d-cache-size = <0x8000>;
+ i-cache-size = <0x8000>;
d-cache-block-size = <64>;
- clocks = <&sysctl K210_CLK_CPU>;
- clock-frequency = <390000000>;
+ d-cache-size = <0x8000>;
+ clocks = <&sysclk K210_CLK_CPU>;
cpu1_intc: interrupt-controller {
#interrupt-cells = <1>;
interrupt-controller;
@@ -68,14 +87,19 @@ cpu1_intc: interrupt-controller {
sram: memory@80000000 {
device_type = "memory";
+ compatible = "canaan,k210-sram";
reg = <0x80000000 0x400000>,
<0x80400000 0x200000>,
<0x80600000 0x200000>;
reg-names = "sram0", "sram1", "aisram";
+ clocks = <&sysclk K210_CLK_SRAM0>,
+ <&sysclk K210_CLK_SRAM1>,
+ <&sysclk K210_CLK_AI>;
+ clock-names = "sram0", "sram1", "aisram";
};
clocks {
- in0: oscillator {
+ in0: osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
@@ -85,41 +109,517 @@ in0: oscillator {
soc {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "kendryte,k210-soc", "simple-bus";
+ compatible = "canaan,k210-soc", "simple-bus";
ranges;
interrupt-parent = <&plic0>;
- sysctl: sysctl@50440000 {
- compatible = "kendryte,k210-sysctl", "simple-mfd";
- reg = <0x50440000 0x1000>;
- #clock-cells = <1>;
+ debug0: debug@0 {
+ compatible = "canaan,k210-debug", "riscv,debug";
+ reg = <0x0 0x1000>;
+ status = "disabled";
+ };
+
+ rom0: nvmem@1000 {
+ reg = <0x1000 0x1000>;
+ read-only;
+ status = "disabled";
};
clint0: clint@2000000 {
#interrupt-cells = <1>;
- compatible = "riscv,clint0";
+ compatible = "canaan,k210-clint", "riscv,clint0";
reg = <0x2000000 0xC000>;
- interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
- &cpu1_intc 3 &cpu1_intc 7>;
- clocks = <&sysctl K210_CLK_ACLK>;
+ interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
+ <&cpu1_intc 3>, <&cpu1_intc 7>;
+ clocks = <&sysclk K210_CLK_CLINT>;
};
- plic0: interrupt-controller@c000000 {
+ plic0: interrupt-controller@C000000 {
#interrupt-cells = <1>;
- interrupt-controller;
- compatible = "kendryte,k210-plic0", "riscv,plic0";
+ compatible = "canaan,k210-plic", "riscv,plic0";
reg = <0xC000000 0x4000000>;
- interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
- <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
+ interrupt-controller;
+ interrupts-extended = <&cpu0_intc 11>,
+ <&cpu1_intc 11>;
riscv,ndev = <65>;
riscv,max-priority = <7>;
};
uarths0: serial@38000000 {
- compatible = "kendryte,k210-uarths", "sifive,uart0";
+ compatible = "canaan,k210-uarths", "sifive,uart0";
reg = <0x38000000 0x1000>;
interrupts = <33>;
- clocks = <&sysctl K210_CLK_CPU>;
+ clocks = <&sysclk K210_CLK_CPU>;
+ status = "disabled";
+ };
+
+ gpio0: gpio-controller@38001000 {
+ #interrupt-cells = <2>;
+ #gpio-cells = <2>;
+ compatible = "canaan,k210-gpiohs", "sifive,gpio0";
+ reg = <0x38001000 0x1000>;
+ interrupt-controller;
+ interrupts = <34 35 36 37 38 39 40 41
+ 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57
+ 58 59 60 61 62 63 64 65>;
+ gpio-controller;
+ ngpios = <32>;
+ status = "disabled";
+ };
+
+ kpu0: kpu@40800000 {
+ compatible = "canaan,k210-kpu";
+ reg = <0x40800000 0xc00000>;
+ interrupts = <25>;
+ clocks = <&sysclk K210_CLK_AI>;
+ status = "disabled";
+ };
+
+ fft0: fft@42000000 {
+ compatible = "canaan,k210-fft";
+ reg = <0x42000000 0x400000>;
+ interrupts = <26>;
+ clocks = <&sysclk K210_CLK_FFT>;
+ resets = <&sysrst K210_RST_FFT>;
+ status = "disabled";
+ };
+
+ dmac0: dma-controller@50000000 {
+ compatible = "canaan,k210-dmac", "snps,axi-dma-1.01a";
+ reg = <0x50000000 0x1000>;
+ interrupts = <27 28 29 30 31 32>;
+ clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
+ clock-names = "core-clk", "cfgr-clk";
+ resets = <&sysrst K210_RST_DMA>;
+ dma-channels = <6>;
+ snps,dma-masters = <2>;
+ snps,priority = <0 1 2 3 4 5>;
+ snps,data-width = <5>;
+ snps,block-size = <0x200000 0x200000 0x200000
+ 0x200000 0x200000 0x200000>;
+ snps,axi-max-burst-len = <256>;
+ status = "disabled";
+ };
+
+ apb0: bus@50200000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "canaan,k210-apb", "simple-pm-bus";
+ ranges;
+ clocks = <&sysclk K210_CLK_APB0>;
+
+ gpio1: gpio-controller@50200000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "canaan,k210-gpio",
+ "snps,dw-apb-gpio";
+ reg = <0x50200000 0x80>;
+ clocks = <&sysclk K210_CLK_APB0>,
+ <&sysclk K210_CLK_GPIO>;
+ clock-names = "bus", "db";
+ resets = <&sysrst K210_RST_GPIO>;
+ status = "disabled";
+
+ gpio1_0: gpio1@0 {
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ compatible = "snps,dw-apb-gpio-port";
+ reg = <0>;
+ interrupt-controller;
+ interrupts = <23>;
+ gpio-controller;
+ ngpios = <8>;
+ };
+ };
+
+ uart1: serial@50210000 {
+ compatible = "canaan,k210-uart",
+ "snps,dw-apb-uart";
+ reg = <0x50210000 0x100>;
+ interrupts = <11>;
+ clocks = <&sysclk K210_CLK_UART1>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&sysrst K210_RST_UART1>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ dcd-override;
+ dsr-override;
+ cts-override;
+ ri-override;
+ status = "disabled";
+ };
+
+ uart2: serial@50220000 {
+ compatible = "canaan,k210-uart",
+ "snps,dw-apb-uart";
+ reg = <0x50220000 0x100>;
+ interrupts = <12>;
+ clocks = <&sysclk K210_CLK_UART2>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&sysrst K210_RST_UART2>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ dcd-override;
+ dsr-override;
+ cts-override;
+ ri-override;
+ status = "disabled";
+ };
+
+ uart3: serial@50230000 {
+ compatible = "canaan,k210-uart",
+ "snps,dw-apb-uart";
+ reg = <0x50230000 0x100>;
+ interrupts = <13>;
+ clocks = <&sysclk K210_CLK_UART3>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "baudclk", "apb_pclk";
+ resets = <&sysrst K210_RST_UART3>;
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ dcd-override;
+ dsr-override;
+ cts-override;
+ ri-override;
+ status = "disabled";
+ };
+
+ spi2: spi@50240000 {
+ compatible = "canaan,k210-spi",
+ "snps,dw-apb-ssi-4.01",
+ "snps,dw-apb-ssi";
+ spi-slave;
+ reg = <0x50240000 0x100>;
+ interrupts = <3>;
+ clocks = <&sysclk K210_CLK_SPI2>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "ssi_clk", "pclk";
+ resets = <&sysrst K210_RST_SPI2>;
+ spi-max-frequency = <25000000>;
+ status = "disabled";
+ };
+
+ i2s0: i2s@50250000 {
+ compatible = "canaan,k210-i2s",
+ "snps,designware-i2s";
+ reg = <0x50250000 0x200>;
+ interrupts = <5>;
+ clocks = <&sysclk K210_CLK_I2S0>;
+ clock-names = "i2sclk";
+ resets = <&sysrst K210_RST_I2S0>;
+ status = "disabled";
+ };
+
+ apu0: sound@520250200 {
+ compatible = "canaan,k210-apu";
+ reg = <0x50250200 0x200>;
+ status = "disabled";
+ };
+
+ i2s1: i2s@50260000 {
+ compatible = "canaan,k210-i2s",
+ "snps,designware-i2s";
+ reg = <0x50260000 0x200>;
+ interrupts = <6>;
+ clocks = <&sysclk K210_CLK_I2S1>;
+ clock-names = "i2sclk";
+ resets = <&sysrst K210_RST_I2S1>;
+ status = "disabled";
+ };
+
+ i2s2: i2s@50270000 {
+ compatible = "canaan,k210-i2s",
+ "snps,designware-i2s";
+ reg = <0x50270000 0x200>;
+ interrupts = <7>;
+ clocks = <&sysclk K210_CLK_I2S2>;
+ clock-names = "i2sclk";
+ resets = <&sysrst K210_RST_I2S2>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@50280000 {
+ compatible = "canaan,k210-i2c",
+ "snps,designware-i2c";
+ reg = <0x50280000 0x100>;
+ interrupts = <8>;
+ clocks = <&sysclk K210_CLK_I2C0>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "ref", "pclk";
+ resets = <&sysrst K210_RST_I2C0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@50290000 {
+ compatible = "canaan,k210-i2c",
+ "snps,designware-i2c";
+ reg = <0x50290000 0x100>;
+ interrupts = <9>;
+ clocks = <&sysclk K210_CLK_I2C1>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "ref", "pclk";
+ resets = <&sysrst K210_RST_I2C1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@502A0000 {
+ compatible = "canaan,k210-i2c",
+ "snps,designware-i2c";
+ reg = <0x502A0000 0x100>;
+ interrupts = <10>;
+ clocks = <&sysclk K210_CLK_I2C2>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "ref", "pclk";
+ resets = <&sysrst K210_RST_I2C2>;
+ status = "disabled";
+ };
+
+ fpioa: pinmux@502B0000 {
+ compatible = "canaan,k210-fpioa";
+ reg = <0x502B0000 0x100>;
+ clocks = <&sysclk K210_CLK_FPIOA>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "ref", "pclk";
+ resets = <&sysrst K210_RST_FPIOA>;
+ canaan,k210-sysctl-power = <&sysctl 108>;
+ status = "disabled";
+ };
+
+ sha256: sha256@502C0000 {
+ compatible = "canaan,k210-sha256";
+ reg = <0x502C0000 0x100>;
+ clocks = <&sysclk K210_CLK_SHA>;
+ resets = <&sysrst K210_RST_SHA>;
+ status = "disabled";
+ };
+
+ timer0: timer@502D0000 {
+ compatible = "canaan,k210-timer",
+ "snps,dw-apb-timer";
+ reg = <0x502D0000 0x100>;
+ interrupts = <14 15>;
+ clocks = <&sysclk K210_CLK_TIMER0>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "timer", "pclk";
+ resets = <&sysrst K210_RST_TIMER0>;
+ status = "disabled";
+ };
+
+ timer1: timer@502E0000 {
+ compatible = "canaan,k210-timer",
+ "snps,dw-apb-timer";
+ reg = <0x502E0000 0x100>;
+ interrupts = <16 17>;
+ clocks = <&sysclk K210_CLK_TIMER1>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "timer", "pclk";
+ resets = <&sysrst K210_RST_TIMER1>;
+ status = "disabled";
+ };
+
+ timer2: timer@502F0000 {
+ compatible = "canaan,k210-timer",
+ "snps,dw-apb-timer";
+ reg = <0x502F0000 0x100>;
+ interrupts = <18 19>;
+ clocks = <&sysclk K210_CLK_TIMER2>,
+ <&sysclk K210_CLK_APB0>;
+ clock-names = "timer", "pclk";
+ resets = <&sysrst K210_RST_TIMER2>;
+ status = "disabled";
+ };
+ };
+
+ apb1: bus@50400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "canaan,k210-apb", "simple-pm-bus";
+ ranges;
+ clocks = <&sysclk K210_CLK_APB1>;
+
+ wdt0: watchdog@50400000 {
+ compatible = "canaan,k210-wdt", "snps,dw-wdt";
+ reg = <0x50400000 0x100>;
+ interrupts = <21>;
+ clocks = <&sysclk K210_CLK_WDT0>,
+ <&sysclk K210_CLK_APB1>;
+ clock-names = "tclk", "pclk";
+ resets = <&sysrst K210_RST_WDT0>;
+ status = "disabled";
+ };
+
+ wdt1: watchdog@50410000 {
+ compatible = "canaan,k210-wdt", "snps,dw-wdt";
+ reg = <0x50410000 0x100>;
+ interrupts = <22>;
+ clocks = <&sysclk K210_CLK_WDT1>,
+ <&sysclk K210_CLK_APB1>;
+ clock-names = "tclk", "pclk";
+ resets = <&sysrst K210_RST_WDT1>;
+ status = "disabled";
+ };
+
+ otp0: nvmem@50420000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "canaan,k210-otp";
+ reg = <0x50420000 0x100>,
+ <0x88000000 0x20000>;
+ reg-names = "reg", "mem";
+ clocks = <&sysclk K210_CLK_ROM>;
+ resets = <&sysrst K210_RST_ROM>;
+ read-only;
+ status = "disabled";
+
+ /* Bootloader */
+ firmware@00000 {
+ reg = <0x00000 0xC200>;
+ };
+
+ /*
+ * config string as described in RISC-V
+ * privileged spec 1.9
+ */
+ config-1-9@1c000 {
+ reg = <0x1C000 0x1000>;
+ };
+
+ /*
+ * Device tree containing only registers,
+ * interrupts, and cpus
+ */
+ fdt@1d000 {
+ reg = <0x1D000 0x2000>;
+ };
+
+ /* CPU/ROM credits */
+ credits@1f000 {
+ reg = <0x1F000 0x1000>;
+ };
+ };
+
+ dvp0: camera@50430000 {
+ compatible = "canaan,k210-dvp";
+ reg = <0x50430000 0x100>;
+ interrupts = <24>;
+ clocks = <&sysclk K210_CLK_DVP>;
+ resets = <&sysrst K210_RST_DVP>;
+ canaan,k210-misc-offset = <&sysctl 84>;
+ status = "disabled";
+ };
+
+ sysctl: syscon@50440000 {
+ compatible = "canaan,k210-sysctl",
+ "syscon", "simple-mfd";
+ reg = <0x50440000 0x100>;
+ reg-io-width = <4>;
+ clocks = <&sysclk K210_CLK_APB1>;
+ clock-names = "pclk";
+
+ sysclk: clock-controller {
+ #clock-cells = <1>;
+ compatible = "canaan,k210-clk";
+ clocks = <&in0>;
+ };
+
+ sysrst: reset-controller {
+ compatible = "canaan,k210-rst";
+ #reset-cells = <1>;
+ };
+
+ reboot: syscon-reboot {
+ compatible = "syscon-reboot";
+ regmap = <&sysctl>;
+ offset = <48>;
+ mask = <1>;
+ value = <1>;
+ };
+ };
+
+ aes0: aes@50450000 {
+ compatible = "canaan,k210-aes";
+ reg = <0x50450000 0x100>;
+ clocks = <&sysclk K210_CLK_AES>;
+ resets = <&sysrst K210_RST_AES>;
+ status = "disabled";
+ };
+
+ rtc: rtc@50460000 {
+ compatible = "canaan,k210-rtc";
+ reg = <0x50460000 0x100>;
+ clocks = <&in0>;
+ resets = <&sysrst K210_RST_RTC>;
+ interrupts = <20>;
+ status = "disabled";
+ };
+ };
+
+ apb2: bus@52000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "canaan,k210-apb", "simple-pm-bus";
+ ranges;
+ clocks = <&sysclk K210_CLK_APB2>;
+
+ spi0: spi@52000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "canaan,k210-spi",
+ "snps,dw-apb-ssi-4.01",
+ "snps,dw-apb-ssi";
+ reg = <0x52000000 0x100>;
+ interrupts = <1>;
+ clocks = <&sysclk K210_CLK_SPI0>,
+ <&sysclk K210_CLK_APB2>;
+ clock-names = "ssi_clk", "pclk";
+ resets = <&sysrst K210_RST_SPI0>;
+ reset-names = "spi";
+ spi-max-frequency = <25000000>;
+ num-cs = <4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ spi1: spi@53000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "canaan,k210-spi",
+ "snps,dw-apb-ssi-4.01",
+ "snps,dw-apb-ssi";
+ reg = <0x53000000 0x100>;
+ interrupts = <2>;
+ clocks = <&sysclk K210_CLK_SPI1>,
+ <&sysclk K210_CLK_APB2>;
+ clock-names = "ssi_clk", "pclk";
+ resets = <&sysrst K210_RST_SPI1>;
+ reset-names = "spi";
+ spi-max-frequency = <25000000>;
+ num-cs = <4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ spi3: spi@54000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "canaan,k210-ssi",
+ "snps,dwc-ssi-1.01a";
+ reg = <0x54000000 0x200>;
+ interrupts = <4>;
+ clocks = <&sysclk K210_CLK_SPI3>,
+ <&sysclk K210_CLK_APB2>;
+ clock-names = "ssi_clk", "pclk";
+ resets = <&sysrst K210_RST_SPI3>;
+ reset-names = "spi";
+ /* Could possibly go up to 200 MHz */
+ spi-max-frequency = <100000000>;
+ num-cs = <4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
};
};
};
new file mode 100644
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Kendryte K210 generic";
+ compatible = "canaan,kendryte-k210";
+
+ chosen {
+ bootargs = "earlycon console=ttySIF0";
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&fpioa {
+ pinctrl-0 = <&jtag_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ jtag_pins: jtag-pinmux {
+ pinmux = <K210_FPIOA(0, K210_PCF_JTAG_TCLK)>,
+ <K210_FPIOA(1, K210_PCF_JTAG_TDI)>,
+ <K210_FPIOA(2, K210_PCF_JTAG_TMS)>,
+ <K210_FPIOA(3, K210_PCF_JTAG_TDO)>;
+ };
+
+ uarths_pins: uarths-pinmux {
+ pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>,
+ <K210_FPIOA(5, K210_PCF_UARTHS_TX)>;
+ };
+};
+
+&uarths0 {
+ pinctrl-0 = <&uarths_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
Update the Canaan Kendryte K210 base device tree k210.dtsi to define all peripherals of the SoC, their clocks and reset lines. The device tree file k210.dts is renamed to k210_generic.dts and becomes the default value selection of the SOC_CANAAN_K210_DTB_BUILTIN_SOURCE configuration option. No device beside the serial console is defined by this device tree. This makes it suitable for all known K210 boards using a builtin initramfs. Most updates to the k210.dtsi file come from Sean Anderson's work on U-Boot support for the K210. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> --- arch/riscv/Kconfig.socs | 2 +- arch/riscv/boot/dts/canaan/k210.dts | 23 - arch/riscv/boot/dts/canaan/k210.dtsi | 562 ++++++++++++++++++-- arch/riscv/boot/dts/canaan/k210_generic.dts | 46 ++ 4 files changed, 578 insertions(+), 55 deletions(-) delete mode 100644 arch/riscv/boot/dts/canaan/k210.dts create mode 100644 arch/riscv/boot/dts/canaan/k210_generic.dts