diff mbox series

[v2,02/10] ARM: dts: stm32: Add Engicam MicroGEA STM32MP1 SoM

Message ID 20210226070304.8028-3-jagan@amarulasolutions.com
State Superseded
Headers show
Series ARM: dts: stm32: Add Engicam STM32MP1 SoM | expand

Commit Message

Jagan Teki Feb. 26, 2021, 7:02 a.m. UTC
MicroGEA STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

General features:
- STM32MP157AAC
- Up to 1GB DDR3L-800
- 512MB Nand flash
- I2S

MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier
boards for creating complete platform solutions.

Add support for it.

Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
Signed-off-by: Francesco Utel <francesco.utel@engicam.com>
Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- none

 .../dts/stm32mp157a-microgea-stm32mp1.dtsi    | 147 ++++++++++++++++++
 1 file changed, 147 insertions(+)
 create mode 100644 arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi

Comments

Alexandre TORGUE Feb. 26, 2021, 4:11 p.m. UTC | #1
Hi Jagan

On 2/26/21 8:02 AM, Jagan Teki wrote:
> MicroGEA STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
> 
> General features:
> - STM32MP157AAC
> - Up to 1GB DDR3L-800
> - 512MB Nand flash
> - I2S
> 
> MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier
> boards for creating complete platform solutions.
> 
> Add support for it.
> 
> Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
> Signed-off-by: Francesco Utel <francesco.utel@engicam.com>
> Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

Minor question: if the stm32mp157 is soldered on Microdev boards why do 
you mention it in this commit message ?

+ a minor comment bellow.

thanks
Alex

> ---
> Changes for v2:
> - none
> 
>   .../dts/stm32mp157a-microgea-stm32mp1.dtsi    | 147 ++++++++++++++++++
>   1 file changed, 147 insertions(+)
>   create mode 100644 arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
> 
> diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
> new file mode 100644
> index 000000000000..97d569107bfe
> --- /dev/null
> +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
> @@ -0,0 +1,147 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
> + * Copyright (c) 2020 Engicam srl
> + * Copyright (c) 2020 Amarula Solutons(India)
> + */
> +
> +/ {
> +	compatible = "engicam,microgea-stm32mp1", "st,stm32mp157";
> +
> +	memory@c0000000 {

you could add 		device_type = "memory";


> +		reg = <0xc0000000 0x10000000>;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		mcuram2: mcuram2@10000000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x10000000 0x40000>;
> +			no-map;
> +		};
> +
> +		vdev0vring0: vdev0vring0@10040000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x10040000 0x1000>;
> +			no-map;
> +		};
> +
> +		vdev0vring1: vdev0vring1@10041000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x10041000 0x1000>;
> +			no-map;
> +		};
> +
> +		vdev0buffer: vdev0buffer@10042000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x10042000 0x4000>;
> +			no-map;
> +		};
> +
> +		mcuram: mcuram@30000000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x30000000 0x40000>;
> +			no-map;
> +		};
> +
> +		retram: retram@38000000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x38000000 0x10000>;
> +			no-map;
> +		};
> +	};
> +
> +	vin: regulator-vin {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vin";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +
> +	vddcore: regulator-vddcore {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vddcore";
> +		regulator-min-microvolt = <1200000>;
> +		regulator-max-microvolt = <1200000>;
> +		regulator-always-on;
> +		vin-supply = <&vin>;
> +	};
> +
> +	vdd: regulator-vdd {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +		vin-supply = <&vin>;
> +	};
> +
> +	vddq_ddr: regulator-vddq-ddr {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vddq_ddr";
> +		regulator-min-microvolt = <1350000>;
> +		regulator-max-microvolt = <1350000>;
> +		regulator-always-on;
> +		vin-supply = <&vin>;
> +	};
> +};
> +
> +&dts {
> +	status = "okay";
> +};
> +
> +&fmc {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&fmc_pins_a>;
> +	pinctrl-1 = <&fmc_sleep_pins_a>;
> +	status = "okay";
> +
> +	nand-controller@4,0 {
> +		status = "okay";
> +
> +		nand@0 {
> +			reg = <0>;
> +			nand-on-flash-bbt;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +		};
> +	};
> +};
> +
> +&ipcc {
> +	status = "okay";
> +};
> +
> +&iwdg2{
> +	timeout-sec = <32>;
> +	status = "okay";
> +};
> +
> +&m4_rproc{
> +	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
> +			<&vdev0vring1>, <&vdev0buffer>;
> +	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
> +	mbox-names = "vq0", "vq1", "shutdown";
> +	interrupt-parent = <&exti>;
> +	interrupts = <68 1>;
> +	status = "okay";
> +};
> +
> +&rng1 {
> +	status = "okay";
> +};
> +
> +&rtc{
> +	status = "okay";
> +};
> +
> +&vrefbuf {
> +	regulator-min-microvolt = <2500000>;
> +	regulator-max-microvolt = <2500000>;
> +	vdda-supply = <&vdd>;
> +	status = "okay";
> +};
>
Jagan Teki Feb. 26, 2021, 4:27 p.m. UTC | #2
Hi Alexandre,

On Fri, Feb 26, 2021 at 9:42 PM Alexandre TORGUE
<alexandre.torgue@foss.st.com> wrote:
>
> Hi Jagan
>
> On 2/26/21 8:02 AM, Jagan Teki wrote:
> > MicroGEA STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
> >
> > General features:
> > - STM32MP157AAC
> > - Up to 1GB DDR3L-800
> > - 512MB Nand flash
> > - I2S
> >
> > MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier
> > boards for creating complete platform solutions.
> >
> > Add support for it.
> >
> > Signed-off-by: Matteo Lisi <matteo.lisi@engicam.com>
> > Signed-off-by: Francesco Utel <francesco.utel@engicam.com>
> > Signed-off-by: Mirko Ardinghi <mirko.ardinghi@engicam.com>
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>
> Minor question: if the stm32mp157 is soldered on Microdev boards why do
> you mention it in this commit message ?

It was there in the commit message:

> > General features:
> > - STM32MP157AAC
> > - Up to 1GB DDR3L-800
> > - 512MB Nand flash
> > - I2S

>
> + a minor comment bellow.
>
> thanks
> Alex
>
> > ---
> > Changes for v2:
> > - none
> >
> >   .../dts/stm32mp157a-microgea-stm32mp1.dtsi    | 147 ++++++++++++++++++
> >   1 file changed, 147 insertions(+)
> >   create mode 100644 arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
> >
> > diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
> > new file mode 100644
> > index 000000000000..97d569107bfe
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
> > @@ -0,0 +1,147 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> > +/*
> > + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
> > + * Copyright (c) 2020 Engicam srl
> > + * Copyright (c) 2020 Amarula Solutons(India)
> > + */
> > +
> > +/ {
> > +     compatible = "engicam,microgea-stm32mp1", "st,stm32mp157";
> > +
> > +     memory@c0000000 {
>
> you could add           device_type = "memory";

Okay.

Jagan.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
new file mode 100644
index 000000000000..97d569107bfe
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
@@ -0,0 +1,147 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
+/ {
+	compatible = "engicam,microgea-stm32mp1", "st,stm32mp157";
+
+	memory@c0000000 {
+		reg = <0xc0000000 0x10000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "vin";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vddcore: regulator-vddcore {
+		compatible = "regulator-fixed";
+		regulator-name = "vddcore";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+
+	vdd: regulator-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+
+	vddq_ddr: regulator-vddq-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vddq_ddr";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		vin-supply = <&vin>;
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&fmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&fmc_pins_a>;
+	pinctrl-1 = <&fmc_sleep_pins_a>;
+	status = "okay";
+
+	nand-controller@4,0 {
+		status = "okay";
+
+		nand@0 {
+			reg = <0>;
+			nand-on-flash-bbt;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2{
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc{
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc{
+	status = "okay";
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};