| Message ID | 20210324052947.27889-3-lizhi.hou@xilinx.com |
|---|---|
| State | New |
| Headers | show |
| Series | XRT Alveo driver overview | expand |
Do not reorder function definitions, this makes comparing changes from the previous patchset difficult. A general issue with returning consistent error codes. There are several cases where fdt_* code are not translated. On 3/23/21 10:29 PM, Lizhi Hou wrote: > XRT drivers use device tree as metadata format to discover HW subsystems > behind PCIe BAR. Thus libfdt functions are called for the driver to parse > device tree blob. to parse the device > > Signed-off-by: Sonal Santan <sonal.santan@xilinx.com> > Signed-off-by: Max Zhen <max.zhen@xilinx.com> > Signed-off-by: Lizhi Hou <lizhi.hou@xilinx.com> > --- > drivers/fpga/xrt/include/metadata.h | 233 ++++++++++++ > drivers/fpga/xrt/metadata/metadata.c | 545 +++++++++++++++++++++++++++ > 2 files changed, 778 insertions(+) > create mode 100644 drivers/fpga/xrt/include/metadata.h > create mode 100644 drivers/fpga/xrt/metadata/metadata.c > > diff --git a/drivers/fpga/xrt/include/metadata.h b/drivers/fpga/xrt/include/metadata.h > new file mode 100644 > index 000000000000..479e47960c61 > --- /dev/null > +++ b/drivers/fpga/xrt/include/metadata.h > @@ -0,0 +1,233 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (C) 2020-2021 Xilinx, Inc. > + * > + * Authors: > + * Lizhi Hou <Lizhi.Hou@xilinx.com> > + */ > + > +#ifndef _XRT_METADATA_H > +#define _XRT_METADATA_H > + > +#include <linux/device.h> > +#include <linux/vmalloc.h> > +#include <linux/uuid.h> > + > +#define XRT_MD_INVALID_LENGTH (~0UL) > + > +/* metadata properties */ > +#define XRT_MD_PROP_BAR_IDX "pcie_bar_mapping" > +#define XRT_MD_PROP_COMPATIBLE "compatible" > +#define XRT_MD_PROP_HWICAP "axi_hwicap" > +#define XRT_MD_PROP_INTERFACE_UUID "interface_uuid" > +#define XRT_MD_PROP_INTERRUPTS "interrupts" > +#define XRT_MD_PROP_IO_OFFSET "reg" > +#define XRT_MD_PROP_LOGIC_UUID "logic_uuid" > +#define XRT_MD_PROP_PDI_CONFIG "pdi_config_mem" > +#define XRT_MD_PROP_PF_NUM "pcie_physical_function" > +#define XRT_MD_PROP_VERSION_MAJOR "firmware_version_major" > + > +/* non IP nodes */ > +#define XRT_MD_NODE_ENDPOINTS "addressable_endpoints" > +#define XRT_MD_NODE_FIRMWARE "firmware" > +#define XRT_MD_NODE_INTERFACES "interfaces" > +#define XRT_MD_NODE_PARTITION_INFO "partition_info" > + > +/* > + * IP nodes > + * AF: AXI Firewall > + * CMC: Card Management Controller > + * ERT: Embedded Runtime * EP: End Point > + * PLP: Provider Reconfigurable Partition > + * ULP: User Reconfigurable Partition > + */ > +#define XRT_MD_NODE_ADDR_TRANSLATOR "ep_remap_data_c2h_00" > +#define XRT_MD_NODE_AF_BLP_CTRL_MGMT "ep_firewall_blp_ctrl_mgmt_00" > +#define XRT_MD_NODE_AF_BLP_CTRL_USER "ep_firewall_blp_ctrl_user_00" > +#define XRT_MD_NODE_AF_CTRL_DEBUG "ep_firewall_ctrl_debug_00" > +#define XRT_MD_NODE_AF_CTRL_MGMT "ep_firewall_ctrl_mgmt_00" > +#define XRT_MD_NODE_AF_CTRL_USER "ep_firewall_ctrl_user_00" > +#define XRT_MD_NODE_AF_DATA_C2H "ep_firewall_data_c2h_00" c2h ? > +#define XRT_MD_NODE_AF_DATA_H2C "ep_firewall_data_h2c_00" > +#define XRT_MD_NODE_AF_DATA_M2M "ep_firewall_data_m2m_00" > +#define XRT_MD_NODE_AF_DATA_P2P "ep_firewall_data_p2p_00" > +#define XRT_MD_NODE_CLKFREQ_HBM "ep_freq_cnt_aclk_hbm_00" > +#define XRT_MD_NODE_CLKFREQ_K1 "ep_freq_cnt_aclk_kernel_00" > +#define XRT_MD_NODE_CLKFREQ_K2 "ep_freq_cnt_aclk_kernel_01" > +#define XRT_MD_NODE_CLK_KERNEL1 "ep_aclk_kernel_00" > +#define XRT_MD_NODE_CLK_KERNEL2 "ep_aclk_kernel_01" > +#define XRT_MD_NODE_CLK_KERNEL3 "ep_aclk_hbm_00" hbm ? unusual acronyms should be documented. > +#define XRT_MD_NODE_CLK_SHUTDOWN "ep_aclk_shutdown_00" > +#define XRT_MD_NODE_CMC_FW_MEM "ep_cmc_firmware_mem_00" > +#define XRT_MD_NODE_CMC_MUTEX "ep_cmc_mutex_00" > +#define XRT_MD_NODE_CMC_REG "ep_cmc_regmap_00" > +#define XRT_MD_NODE_CMC_RESET "ep_cmc_reset_00" > +#define XRT_MD_NODE_DDR_CALIB "ep_ddr_mem_calib_00" > +#define XRT_MD_NODE_DDR4_RESET_GATE "ep_ddr_mem_srsr_gate_00" > +#define XRT_MD_NODE_ERT_BASE "ep_ert_base_address_00" > +#define XRT_MD_NODE_ERT_CQ_MGMT "ep_ert_command_queue_mgmt_00" > +#define XRT_MD_NODE_ERT_CQ_USER "ep_ert_command_queue_user_00" > +#define XRT_MD_NODE_ERT_FW_MEM "ep_ert_firmware_mem_00" > +#define XRT_MD_NODE_ERT_RESET "ep_ert_reset_00" > +#define XRT_MD_NODE_ERT_SCHED "ep_ert_sched_00" > +#define XRT_MD_NODE_FLASH "ep_card_flash_program_00" > +#define XRT_MD_NODE_FPGA_CONFIG "ep_fpga_configuration_00" > +#define XRT_MD_NODE_GAPPING "ep_gapping_demand_00" > +#define XRT_MD_NODE_GATE_PLP "ep_pr_isolate_plp_00" > +#define XRT_MD_NODE_GATE_ULP "ep_pr_isolate_ulp_00" > +#define XRT_MD_NODE_KDMA_CTRL "ep_kdma_ctrl_00" > +#define XRT_MD_NODE_MAILBOX_MGMT "ep_mailbox_mgmt_00" > +#define XRT_MD_NODE_MAILBOX_USER "ep_mailbox_user_00" > +#define XRT_MD_NODE_MAILBOX_XRT "ep_mailbox_user_to_ert_00" > +#define XRT_MD_NODE_MSIX "ep_msix_00" > +#define XRT_MD_NODE_P2P "ep_p2p_00" > +#define XRT_MD_NODE_PCIE_MON "ep_pcie_link_mon_00" > +#define XRT_MD_NODE_PMC_INTR "ep_pmc_intr_00" > +#define XRT_MD_NODE_PMC_MUX "ep_pmc_mux_00" > +#define XRT_MD_NODE_QDMA "ep_qdma_00" > +#define XRT_MD_NODE_QDMA4 "ep_qdma4_00" > +#define XRT_MD_NODE_REMAP_P2P "ep_remap_p2p_00" > +#define XRT_MD_NODE_STM "ep_stream_traffic_manager_00" > +#define XRT_MD_NODE_STM4 "ep_stream_traffic_manager4_00" > +#define XRT_MD_NODE_SYSMON "ep_cmp_sysmon_00" > +#define XRT_MD_NODE_XDMA "ep_xdma_00" > +#define XRT_MD_NODE_XVC_PUB "ep_debug_bscan_user_00" > +#define XRT_MD_NODE_XVC_PRI "ep_debug_bscan_mgmt_00" > +#define XRT_MD_NODE_UCS_CONTROL_STATUS "ep_ucs_control_status_00" > + > +/* endpoint regmaps */ > +#define XRT_MD_REGMAP_DDR_SRSR "drv_ddr_srsr" > +#define XRT_MD_REGMAP_CLKFREQ "freq_cnt" clock frequency vs frequency count ? is this ok? > + > +/* driver defined endpoints */ > +#define XRT_MD_NODE_BLP_ROM "drv_ep_blp_rom_00" > +#define XRT_MD_NODE_DDR_SRSR "drv_ep_ddr_srsr" > +#define XRT_MD_NODE_FLASH_VSEC "drv_ep_card_flash_program_00" > +#define XRT_MD_NODE_GOLDEN_VER "drv_ep_golden_ver_00" > +#define XRT_MD_NODE_MAILBOX_VSEC "drv_ep_mailbox_vsec_00" > +#define XRT_MD_NODE_MGMT_MAIN "drv_ep_mgmt_main_00" > +#define XRT_MD_NODE_PLAT_INFO "drv_ep_platform_info_mgmt_00" > +#define XRT_MD_NODE_PARTITION_INFO_BLP "partition_info_0" > +#define XRT_MD_NODE_PARTITION_INFO_PLP "partition_info_1" > +#define XRT_MD_NODE_TEST "drv_ep_test_00" > +#define XRT_MD_NODE_VSEC "drv_ep_vsec_00" > +#define XRT_MD_NODE_VSEC_GOLDEN "drv_ep_vsec_golden_00" > + > +/* driver defined properties */ > +#define XRT_MD_PROP_OFFSET "drv_offset" > +#define XRT_MD_PROP_CLK_FREQ "drv_clock_frequency" > +#define XRT_MD_PROP_CLK_CNT "drv_clock_frequency_counter" > +#define XRT_MD_PROP_VBNV "vbnv" > +#define XRT_MD_PROP_VROM "vrom" > +#define XRT_MD_PROP_PARTITION_LEVEL "partition_level" > + > +struct xrt_md_endpoint { > + const char *ep_name; > + u32 bar; > + u64 bar_off; > + ulong size; bar_off changed from long to u64. should bar and size both be changed to u64 ? > + char *regmap; It seems like this is really a compatibility string and not a regmap. > + char *regmap_ver; > +}; > + > +/* Note: res_id is defined by leaf driver and must start with 0. */ > +struct xrt_iores_map { > + char *res_name; > + int res_id; > +}; > + > +static inline int xrt_md_res_name2id(const struct xrt_iores_map *res_map, > + int entry_num, const char *res_name) > +{ > + int i; > + > + for (i = 0; i < entry_num; i++) { > + if (!strncmp(res_name, res_map->res_name, strlen(res_map->res_name) + 1)) > + return res_map->res_id; > + res_map++; > + } > + return -1; > +} > + > +static inline const char * > +xrt_md_res_id2name(const struct xrt_iores_map *res_map, int entry_num, int id) > +{ > + int i; > + > + for (i = 0; i < entry_num; i++) { > + if (res_map->res_id == id) > + return res_map->res_name; > + res_map++; > + } > + return NULL; > +} > + > +unsigned long xrt_md_size(struct device *dev, const char *blob); > +int xrt_md_create(struct device *dev, char **blob); > +char *xrt_md_dup(struct device *dev, const char *blob); > +int xrt_md_add_endpoint(struct device *dev, char *blob, > + struct xrt_md_endpoint *ep); > +int xrt_md_del_endpoint(struct device *dev, char *blob, const char *ep_name, > + const char *regmap_name); > +int xrt_md_get_prop(struct device *dev, const char *blob, const char *ep_name, > + const char *regmap_name, const char *prop, > + const void **val, int *size); > +int xrt_md_set_prop(struct device *dev, char *blob, const char *ep_name, > + const char *regmap_name, const char *prop, > + const void *val, int size); > +int xrt_md_copy_endpoint(struct device *dev, char *blob, const char *src_blob, > + const char *ep_name, const char *regmap_name, > + const char *new_ep_name); > +int xrt_md_get_next_endpoint(struct device *dev, const char *blob, > + const char *ep_name, const char *regmap_name, > + char **next_ep, char **next_regmap); > +int xrt_md_get_compatible_endpoint(struct device *dev, const char *blob, > + const char *regmap_name, const char **ep_name); > +int xrt_md_find_endpoint(struct device *dev, const char *blob, > + const char *ep_name, const char *regmap_name, > + const char **epname); > +int xrt_md_pack(struct device *dev, char *blob); > +int xrt_md_get_interface_uuids(struct device *dev, const char *blob, > + u32 num_uuids, uuid_t *intf_uuids); > + > +/* > + * The firmware provides a 128 bit hash string as a unique id to the > + * partition/interface. > + * Existing hw does not yet use the cononical form, so it is necessary to > + * use a translation function. > + */ > +static inline void xrt_md_trans_uuid2str(const uuid_t *uuid, char *uuidstr) > +{ > + int i, p; > + u8 tmp[UUID_SIZE]; > + > + BUILD_BUG_ON(UUID_SIZE != 16); > + export_uuid(tmp, uuid); ok > + for (p = 0, i = UUID_SIZE - 1; i >= 0; p++, i--) > + snprintf(&uuidstr[p * 2], 3, "%02x", tmp[i]); XMGMT_UUID_STR_LEN is 80. This logic say it could be reduced to 33. > +} > + > +static inline int xrt_md_trans_str2uuid(struct device *dev, const char *uuidstr, uuid_t *p_uuid) > +{ > + u8 p[UUID_SIZE]; > + const char *str; > + char tmp[3] = { 0 }; > + int i, ret; > + > + BUILD_BUG_ON(UUID_SIZE != 16); Also defined above, do not need to repeat. > + str = uuidstr + strlen(uuidstr) - 2; needs an underflow check > + > + for (i = 0; i < sizeof(*p_uuid) && str >= uuidstr; i++) { > + tmp[0] = *str; > + tmp[1] = *(str + 1); > + ret = kstrtou8(tmp, 16, &p[i]); > + if (ret) > + return -EINVAL; > + str -= 2; > + } > + import_uuid(p_uuid, p); > + > + return 0; > +} > + > +#endif > diff --git a/drivers/fpga/xrt/metadata/metadata.c b/drivers/fpga/xrt/metadata/metadata.c > new file mode 100644 > index 000000000000..3b2be50fcb02 > --- /dev/null > +++ b/drivers/fpga/xrt/metadata/metadata.c > @@ -0,0 +1,545 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Xilinx Alveo FPGA Metadata parse APIs > + * > + * Copyright (C) 2020-2021 Xilinx, Inc. > + * > + * Authors: > + * Lizhi Hou <Lizhi.Hou@xilinx.com> > + */ > + > +#include <linux/libfdt_env.h> > +#include "libfdt.h" > +#include "metadata.h" > + > +#define MAX_BLOB_SIZE (4096 * 25) > +#define MAX_DEPTH 5 MAX_BLOB_SIZE is defined in keys/trusted-type.h General, add a prefix to help avoid conflicts. Like XRT_MAX_BLOB_SIZE etc. > + > +static int xrt_md_setprop(struct device *dev, char *blob, int offset, > + const char *prop, const void *val, int size) > +{ > + int ret; > + > + ret = fdt_setprop(blob, offset, prop, val, size); > + if (ret) > + dev_err(dev, "failed to set prop %d", ret); > + > + return ret; > +} > + > +static int xrt_md_add_node(struct device *dev, char *blob, int parent_offset, > + const char *ep_name) > +{ > + int ret; > + > + ret = fdt_add_subnode(blob, parent_offset, ep_name); > + if (ret < 0 && ret != -FDT_ERR_EXISTS) > + dev_err(dev, "failed to add node %s. %d", ep_name, ret); > + > + return ret; > +} > + > +static int xrt_md_get_endpoint(struct device *dev, const char *blob, > + const char *ep_name, const char *regmap_name, > + int *ep_offset) > +{ > + const char *name; > + int offset; > + > + for (offset = fdt_next_node(blob, -1, NULL); > + offset >= 0; > + offset = fdt_next_node(blob, offset, NULL)) { > + name = fdt_get_name(blob, offset, NULL); > + if (!name || strncmp(name, ep_name, strlen(ep_name) + 1)) > + continue; > + if (!regmap_name || regmap_name is known at the start but checked here in the loop. this check should be made outside of the loop. > + !fdt_node_check_compatible(blob, offset, regmap_name)) > + break; > + } > + if (offset < 0) > + return -ENODEV; > + > + *ep_offset = offset; > + > + return 0; > +} > + > +static inline int xrt_md_get_node(struct device *dev, const char *blob, > + const char *name, const char *regmap_name, > + int *offset) > +{ > + int ret = 0; > + > + if (name) { > + ret = xrt_md_get_endpoint(dev, blob, name, regmap_name, > + offset); > + if (ret) { > + dev_err(dev, "cannot get node %s, regmap %s, ret = %d", > + name, regmap_name, ret); from above regmap_name is sometimes NULL. > + return -EINVAL; > + } > + } else { > + ret = fdt_next_node(blob, -1, NULL); > + if (ret < 0) { > + dev_err(dev, "internal error, ret = %d", ret); > + return -EINVAL; > + } > + *offset = ret; > + } > + > + return 0; > +} > + > +static int xrt_md_overlay(struct device *dev, char *blob, int target, > + const char *overlay_blob, int overlay_offset, > + int depth) > +{ > + int property, subnode; > + int ret; whitespace, looks like tab's after 'int' should be consistent with space used elsewhere > + > + if (!blob || !overlay_blob) { > + dev_err(dev, "blob is NULL"); > + return -EINVAL; > + } > + > + if (depth > MAX_DEPTH) { ok > + dev_err(dev, "meta data depth beyond %d", MAX_DEPTH); > + return -EINVAL; > + } > + > + if (target < 0) { > + target = fdt_next_node(blob, -1, NULL); > + if (target < 0) { > + dev_err(dev, "invalid target"); > + return -EINVAL; > + } > + } > + if (overlay_offset < 0) { > + overlay_offset = fdt_next_node(overlay_blob, -1, NULL); > + if (overlay_offset < 0) { > + dev_err(dev, "invalid overlay"); > + return -EINVAL; > + } > + } > + > + fdt_for_each_property_offset(property, overlay_blob, overlay_offset) { > + const char *name; > + const void *prop; > + int prop_len; > + > + prop = fdt_getprop_by_offset(overlay_blob, property, &name, > + &prop_len); > + if (!prop || prop_len >= MAX_BLOB_SIZE || prop_len < 0) { > + dev_err(dev, "internal error"); > + return -EINVAL; > + } > + > + ret = xrt_md_setprop(dev, blob, target, name, prop, > + prop_len); > + if (ret) { > + dev_err(dev, "setprop failed, ret = %d", ret); > + return ret; > + } > + } > + > + fdt_for_each_subnode(subnode, overlay_blob, overlay_offset) { > + const char *name = fdt_get_name(overlay_blob, subnode, NULL); > + int nnode; > + > + nnode = xrt_md_add_node(dev, blob, target, name); > + if (nnode == -FDT_ERR_EXISTS) > + nnode = fdt_subnode_offset(blob, target, name); > + if (nnode < 0) { > + dev_err(dev, "add node failed, ret = %d", nnode); > + return nnode; This is an offset, not an error code return -EINVAL or similar > + } > + > + ret = xrt_md_overlay(dev, blob, nnode, overlay_blob, subnode, depth + 1); > + if (ret) > + return ret; > + } > + > + return 0; > +} > + > +unsigned long xrt_md_size(struct device *dev, const char *blob) > +{ review fdt_ro_probe. fdt_totalsize is signed 32 bit, this conversion to sometimes 64 bit is not necessary. at most it should be uint32_t > + unsigned long len = (long)fdt_totalsize(blob); > + > + if (len > MAX_BLOB_SIZE) > + return XRT_MD_INVALID_LENGTH; > + > + return len; > +} > +EXPORT_SYMBOL_GPL(xrt_md_size); > + > +int xrt_md_create(struct device *dev, char **blob) > +{ > + int ret = 0; > + > + if (!blob) { > + dev_err(dev, "blob is NULL"); > + return -EINVAL; > + } > + > + *blob = vzalloc(MAX_BLOB_SIZE); > + if (!*blob) > + return -ENOMEM; > + > + ret = fdt_create_empty_tree(*blob, MAX_BLOB_SIZE); > + if (ret) { > + dev_err(dev, "format blob failed, ret = %d", ret); > + goto failed; > + } > + > + ret = fdt_next_node(*blob, -1, NULL); > + if (ret < 0) { > + dev_err(dev, "No Node, ret = %d", ret); > + goto failed; > + } > + > + ret = fdt_add_subnode(*blob, 0, XRT_MD_NODE_ENDPOINTS); > + if (ret < 0) { fdt error code > + dev_err(dev, "add node failed, ret = %d", ret); > + goto failed; > + } > + > + return 0; > + > +failed: > + vfree(*blob); > + *blob = NULL; > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(xrt_md_create); > + > +char *xrt_md_dup(struct device *dev, const char *blob) > +{ > + char *dup_blob; > + int ret; > + > + ret = xrt_md_create(dev, &dup_blob); > + if (ret) > + return NULL; > + ret = xrt_md_overlay(dev, dup_blob, -1, blob, -1, 0); > + if (ret) { > + vfree(dup_blob); > + return NULL; > + } > + > + return dup_blob; > +} > +EXPORT_SYMBOL_GPL(xrt_md_dup); Wasn't xrt_md_dup going to be replaced by memcpy ? > + > +int xrt_md_del_endpoint(struct device *dev, char *blob, const char *ep_name, > + const char *regmap_name) > +{ > + int ep_offset; > + int ret; > + > + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, &ep_offset); > + if (ret) { > + dev_err(dev, "can not find ep %s", ep_name); > + return -EINVAL; > + } > + > + ret = fdt_del_node(blob, ep_offset); fdt return code Fix these generally. > + if (ret) > + dev_err(dev, "delete node %s failed, ret %d", ep_name, ret); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(xrt_md_del_endpoint); > + > +static int __xrt_md_add_endpoint(struct device *dev, char *blob, > + struct xrt_md_endpoint *ep, int *offset, > + const char *parent) > +{ > + int parent_offset = 0; > + u32 val, count = 0; > + int ep_offset = 0; > + u64 io_range[2]; > + char comp[128]; > + int ret = 0; > + > + if (!ep->ep_name) { > + dev_err(dev, "empty name"); > + return -EINVAL; > + } > + > + if (parent) { > + ret = xrt_md_get_endpoint(dev, blob, parent, NULL, &parent_offset); > + if (ret) { > + dev_err(dev, "invalid blob, ret = %d", ret); > + return -EINVAL; > + } > + } > + > + ep_offset = xrt_md_add_node(dev, blob, parent_offset, ep->ep_name); > + if (ep_offset < 0) { > + dev_err(dev, "add endpoint failed, ret = %d", ret); > + return -EINVAL; > + } > + if (offset) > + *offset = ep_offset; > + > + if (ep->size != 0) { > + val = cpu_to_be32(ep->bar); > + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_BAR_IDX, > + &val, sizeof(u32)); > + if (ret) { > + dev_err(dev, "set %s failed, ret %d", > + XRT_MD_PROP_BAR_IDX, ret); > + goto failed; > + } > + io_range[0] = cpu_to_be64((u64)ep->bar_off); > + io_range[1] = cpu_to_be64((u64)ep->size); if ep->bar is an index, then rename the element to 'bar_index' > + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_IO_OFFSET, > + io_range, sizeof(io_range)); > + if (ret) { > + dev_err(dev, "set %s failed, ret %d", > + XRT_MD_PROP_IO_OFFSET, ret); > + goto failed; > + } > + } > + > + if (ep->regmap) { > + if (ep->regmap_ver) { > + count = snprintf(comp, sizeof(comp) - 1, The -1 should be good enough that the if-check below is not needed > + "%s-%s", ep->regmap, ep->regmap_ver); > + count++; > + } > + if (count > sizeof(comp)) { > + ret = -EINVAL; > + goto failed; > + } > + > + count += snprintf(comp + count, sizeof(comp) - count - 1, > + "%s", ep->regmap); what happens when only part of regmap is added to comp ? > + count++; > + if (count > sizeof(comp)) { > + ret = -EINVAL; > + goto failed; > + } > + > + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_COMPATIBLE, > + comp, count); > + if (ret) { > + dev_err(dev, "set %s failed, ret %d", > + XRT_MD_PROP_COMPATIBLE, ret); > + goto failed; > + } > + } > + > +failed: > + if (ret) > + xrt_md_del_endpoint(dev, blob, ep->ep_name, NULL); > + > + return ret; > +} > + > +int xrt_md_add_endpoint(struct device *dev, char *blob, > + struct xrt_md_endpoint *ep) > +{ > + return __xrt_md_add_endpoint(dev, blob, ep, NULL, XRT_MD_NODE_ENDPOINTS); > +} > +EXPORT_SYMBOL_GPL(xrt_md_add_endpoint); > + > +int xrt_md_find_endpoint(struct device *dev, const char *blob, > + const char *ep_name, const char *regmap_name, > + const char **epname) > +{ > + int offset; > + int ret; > + > + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, > + &offset); > + if (!ret && epname) split this condition, if the call failed, check and return early. > + *epname = fdt_get_name(blob, offset, NULL); what happens if fdt_get_name fails ? > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(xrt_md_find_endpoint); > + > +int xrt_md_get_prop(struct device *dev, const char *blob, const char *ep_name, > + const char *regmap_name, const char *prop, > + const void **val, int *size) > +{ > + int offset; > + int ret; > + > + if (!val) { > + dev_err(dev, "val is null"); > + return -EINVAL; ok > + } > + > + *val = NULL; > + ret = xrt_md_get_node(dev, blob, ep_name, regmap_name, &offset); > + if (ret) > + return ret; > + > + *val = fdt_getprop(blob, offset, prop, size); > + if (!*val) { > + dev_dbg(dev, "get ep %s, prop %s failed", ep_name, prop); > + return -EINVAL; > + } > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(xrt_md_get_prop); > + > +int xrt_md_set_prop(struct device *dev, char *blob, > + const char *ep_name, const char *regmap_name, > + const char *prop, const void *val, int size) > +{ > + int offset; > + int ret; > + > + ret = xrt_md_get_node(dev, blob, ep_name, regmap_name, &offset); > + if (ret) > + return ret; > + > + ret = xrt_md_setprop(dev, blob, offset, prop, val, size); ok > + if (ret) > + dev_err(dev, "set prop %s failed, ret = %d", prop, ret); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(xrt_md_set_prop); > + > +int xrt_md_copy_endpoint(struct device *dev, char *blob, const char *src_blob, > + const char *ep_name, const char *regmap_name, > + const char *new_ep_name) > +{ > + const char *newepnm = new_ep_name ? new_ep_name : ep_name; > + struct xrt_md_endpoint ep = {0}; > + int offset, target; > + const char *parent; > + int ret; > + > + ret = xrt_md_get_endpoint(dev, src_blob, ep_name, regmap_name, > + &offset); > + if (ret) > + return -EINVAL; > + > + ret = xrt_md_get_endpoint(dev, blob, newepnm, regmap_name, &target); > + if (ret) { > + ep.ep_name = newepnm; > + parent = fdt_parent_offset(src_blob, offset) == 0 ? NULL : XRT_MD_NODE_ENDPOINTS; > + ret = __xrt_md_add_endpoint(dev, blob, &ep, &target, parent); > + if (ret) > + return -EINVAL; > + } > + > + ret = xrt_md_overlay(dev, blob, target, src_blob, offset, 0); > + if (ret) > + dev_err(dev, "overlay failed, ret = %d", ret); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(xrt_md_copy_endpoint); > + > +int xrt_md_get_next_endpoint(struct device *dev, const char *blob, > + const char *ep_name, const char *regmap_name, > + char **next_ep, char **next_regmap) > +{ > + int offset, ret; > + > + *next_ep = NULL; > + *next_regmap = NULL; > + if (!ep_name) { > + ret = xrt_md_get_endpoint(dev, blob, XRT_MD_NODE_ENDPOINTS, NULL, > + &offset); > + } else { > + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, > + &offset); > + } > + > + if (ret) > + return -EINVAL; > + > + offset = ep_name ? fdt_next_subnode(blob, offset) : > + fdt_first_subnode(blob, offset); tristate with function calls is harder to follow, convert this to if-else logic > + if (offset < 0) > + return -EINVAL; > + > + *next_ep = (char *)fdt_get_name(blob, offset, NULL); > + *next_regmap = (char *)fdt_stringlist_get(blob, offset, XRT_MD_PROP_COMPATIBLE, > + 0, NULL); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(xrt_md_get_next_endpoint); > + > +int xrt_md_get_compatible_endpoint(struct device *dev, const char *blob, > + const char *regmap_name, const char **ep_name) > +{ > + int ep_offset; > + > + ep_offset = fdt_node_offset_by_compatible(blob, -1, regmap_name); > + if (ep_offset < 0) { > + *ep_name = NULL; > + return -ENOENT; > + } > + > + *ep_name = fdt_get_name(blob, ep_offset, NULL); > + > + return 0; > +} > +EXPORT_SYMBOL_GPL(xrt_md_get_compatible_endpoint); > + > +int xrt_md_pack(struct device *dev, char *blob) > +{ > + int ret; > + > + ret = fdt_pack(blob); > + if (ret) > + dev_err(dev, "pack failed %d", ret); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(xrt_md_pack); > + > +int xrt_md_get_interface_uuids(struct device *dev, const char *blob, ok > + u32 num_uuids, uuid_t *interface_uuids) > +{ > + int offset, count = 0; > + const char *uuid_str; > + int ret; > + > + ret = xrt_md_get_endpoint(dev, blob, XRT_MD_NODE_INTERFACES, NULL, &offset); > + if (ret) > + return -ENOENT; > + > + for (offset = fdt_first_subnode(blob, offset); > + offset >= 0; > + offset = fdt_next_subnode(blob, offset), count++) { > + uuid_str = fdt_getprop(blob, offset, XRT_MD_PROP_INTERFACE_UUID, > + NULL); > + if (!uuid_str) { > + dev_err(dev, "empty interface uuid node"); > + return -EINVAL; > + } > + > + if (!num_uuids) > + continue; > + > + if (count == num_uuids) { ok > + dev_err(dev, "too many interface uuid in blob"); > + return -EINVAL; > + } > + > + if (interface_uuids && count < num_uuids) { > + ret = xrt_md_trans_str2uuid(dev, uuid_str, > + &interface_uuids[count]); > + if (ret) > + return -EINVAL; > + } > + } > + if (!count) > + count = -ENOENT; > + > + return count; > +} > +EXPORT_SYMBOL_GPL(xrt_md_get_interface_uuids); Thanks for the changes, Tom
Hi Tom, On 03/28/2021 08:30 AM, Tom Rix wrote: > Do not reorder function definitions, this makes comparing changes from the previous patchset difficult. > > A general issue with returning consistent error codes. There are several cases where fdt_* code are not translated. Sure. Will fix. > > On 3/23/21 10:29 PM, Lizhi Hou wrote: >> XRT drivers use device tree as metadata format to discover HW subsystems >> behind PCIe BAR. Thus libfdt functions are called for the driver to parse >> device tree blob. > to parse the device Will fix >> Signed-off-by: Sonal Santan <sonal.santan@xilinx.com> >> Signed-off-by: Max Zhen <max.zhen@xilinx.com> >> Signed-off-by: Lizhi Hou <lizhi.hou@xilinx.com> >> --- >> drivers/fpga/xrt/include/metadata.h | 233 ++++++++++++ >> drivers/fpga/xrt/metadata/metadata.c | 545 +++++++++++++++++++++++++++ >> 2 files changed, 778 insertions(+) >> create mode 100644 drivers/fpga/xrt/include/metadata.h >> create mode 100644 drivers/fpga/xrt/metadata/metadata.c >> >> diff --git a/drivers/fpga/xrt/include/metadata.h b/drivers/fpga/xrt/include/metadata.h >> new file mode 100644 >> index 000000000000..479e47960c61 >> --- /dev/null >> +++ b/drivers/fpga/xrt/include/metadata.h >> @@ -0,0 +1,233 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Copyright (C) 2020-2021 Xilinx, Inc. >> + * >> + * Authors: >> + * Lizhi Hou <Lizhi.Hou@xilinx.com> >> + */ >> + >> +#ifndef _XRT_METADATA_H >> +#define _XRT_METADATA_H >> + >> +#include <linux/device.h> >> +#include <linux/vmalloc.h> >> +#include <linux/uuid.h> >> + >> +#define XRT_MD_INVALID_LENGTH (~0UL) >> + >> +/* metadata properties */ >> +#define XRT_MD_PROP_BAR_IDX "pcie_bar_mapping" >> +#define XRT_MD_PROP_COMPATIBLE "compatible" >> +#define XRT_MD_PROP_HWICAP "axi_hwicap" >> +#define XRT_MD_PROP_INTERFACE_UUID "interface_uuid" >> +#define XRT_MD_PROP_INTERRUPTS "interrupts" >> +#define XRT_MD_PROP_IO_OFFSET "reg" >> +#define XRT_MD_PROP_LOGIC_UUID "logic_uuid" >> +#define XRT_MD_PROP_PDI_CONFIG "pdi_config_mem" >> +#define XRT_MD_PROP_PF_NUM "pcie_physical_function" >> +#define XRT_MD_PROP_VERSION_MAJOR "firmware_version_major" >> + >> +/* non IP nodes */ >> +#define XRT_MD_NODE_ENDPOINTS "addressable_endpoints" >> +#define XRT_MD_NODE_FIRMWARE "firmware" >> +#define XRT_MD_NODE_INTERFACES "interfaces" >> +#define XRT_MD_NODE_PARTITION_INFO "partition_info" >> + >> +/* >> + * IP nodes >> + * AF: AXI Firewall >> + * CMC: Card Management Controller >> + * ERT: Embedded Runtime > * EP: End Point Will add >> + * PLP: Provider Reconfigurable Partition >> + * ULP: User Reconfigurable Partition >> + */ >> +#define XRT_MD_NODE_ADDR_TRANSLATOR "ep_remap_data_c2h_00" >> +#define XRT_MD_NODE_AF_BLP_CTRL_MGMT "ep_firewall_blp_ctrl_mgmt_00" >> +#define XRT_MD_NODE_AF_BLP_CTRL_USER "ep_firewall_blp_ctrl_user_00" >> +#define XRT_MD_NODE_AF_CTRL_DEBUG "ep_firewall_ctrl_debug_00" >> +#define XRT_MD_NODE_AF_CTRL_MGMT "ep_firewall_ctrl_mgmt_00" >> +#define XRT_MD_NODE_AF_CTRL_USER "ep_firewall_ctrl_user_00" >> +#define XRT_MD_NODE_AF_DATA_C2H "ep_firewall_data_c2h_00" > c2h ? Card to host. I will add a comment. >> +#define XRT_MD_NODE_AF_DATA_H2C "ep_firewall_data_h2c_00" >> +#define XRT_MD_NODE_AF_DATA_M2M "ep_firewall_data_m2m_00" >> +#define XRT_MD_NODE_AF_DATA_P2P "ep_firewall_data_p2p_00" >> +#define XRT_MD_NODE_CLKFREQ_HBM "ep_freq_cnt_aclk_hbm_00" >> +#define XRT_MD_NODE_CLKFREQ_K1 "ep_freq_cnt_aclk_kernel_00" >> +#define XRT_MD_NODE_CLKFREQ_K2 "ep_freq_cnt_aclk_kernel_01" >> +#define XRT_MD_NODE_CLK_KERNEL1 "ep_aclk_kernel_00" >> +#define XRT_MD_NODE_CLK_KERNEL2 "ep_aclk_kernel_01" >> +#define XRT_MD_NODE_CLK_KERNEL3 "ep_aclk_hbm_00" > hbm ? > > unusual acronyms should be documented. High bandwidth memory. I will add a comment. > >> +#define XRT_MD_NODE_CLK_SHUTDOWN "ep_aclk_shutdown_00" >> +#define XRT_MD_NODE_CMC_FW_MEM "ep_cmc_firmware_mem_00" >> +#define XRT_MD_NODE_CMC_MUTEX "ep_cmc_mutex_00" >> +#define XRT_MD_NODE_CMC_REG "ep_cmc_regmap_00" >> +#define XRT_MD_NODE_CMC_RESET "ep_cmc_reset_00" >> +#define XRT_MD_NODE_DDR_CALIB "ep_ddr_mem_calib_00" >> +#define XRT_MD_NODE_DDR4_RESET_GATE "ep_ddr_mem_srsr_gate_00" >> +#define XRT_MD_NODE_ERT_BASE "ep_ert_base_address_00" >> +#define XRT_MD_NODE_ERT_CQ_MGMT "ep_ert_command_queue_mgmt_00" >> +#define XRT_MD_NODE_ERT_CQ_USER "ep_ert_command_queue_user_00" >> +#define XRT_MD_NODE_ERT_FW_MEM "ep_ert_firmware_mem_00" >> +#define XRT_MD_NODE_ERT_RESET "ep_ert_reset_00" >> +#define XRT_MD_NODE_ERT_SCHED "ep_ert_sched_00" >> +#define XRT_MD_NODE_FLASH "ep_card_flash_program_00" >> +#define XRT_MD_NODE_FPGA_CONFIG "ep_fpga_configuration_00" >> +#define XRT_MD_NODE_GAPPING "ep_gapping_demand_00" >> +#define XRT_MD_NODE_GATE_PLP "ep_pr_isolate_plp_00" >> +#define XRT_MD_NODE_GATE_ULP "ep_pr_isolate_ulp_00" >> +#define XRT_MD_NODE_KDMA_CTRL "ep_kdma_ctrl_00" >> +#define XRT_MD_NODE_MAILBOX_MGMT "ep_mailbox_mgmt_00" >> +#define XRT_MD_NODE_MAILBOX_USER "ep_mailbox_user_00" >> +#define XRT_MD_NODE_MAILBOX_XRT "ep_mailbox_user_to_ert_00" >> +#define XRT_MD_NODE_MSIX "ep_msix_00" >> +#define XRT_MD_NODE_P2P "ep_p2p_00" >> +#define XRT_MD_NODE_PCIE_MON "ep_pcie_link_mon_00" >> +#define XRT_MD_NODE_PMC_INTR "ep_pmc_intr_00" >> +#define XRT_MD_NODE_PMC_MUX "ep_pmc_mux_00" >> +#define XRT_MD_NODE_QDMA "ep_qdma_00" >> +#define XRT_MD_NODE_QDMA4 "ep_qdma4_00" >> +#define XRT_MD_NODE_REMAP_P2P "ep_remap_p2p_00" >> +#define XRT_MD_NODE_STM "ep_stream_traffic_manager_00" >> +#define XRT_MD_NODE_STM4 "ep_stream_traffic_manager4_00" >> +#define XRT_MD_NODE_SYSMON "ep_cmp_sysmon_00" >> +#define XRT_MD_NODE_XDMA "ep_xdma_00" >> +#define XRT_MD_NODE_XVC_PUB "ep_debug_bscan_user_00" >> +#define XRT_MD_NODE_XVC_PRI "ep_debug_bscan_mgmt_00" >> +#define XRT_MD_NODE_UCS_CONTROL_STATUS "ep_ucs_control_status_00" >> + >> +/* endpoint regmaps */ >> +#define XRT_MD_REGMAP_DDR_SRSR "drv_ddr_srsr" >> +#define XRT_MD_REGMAP_CLKFREQ "freq_cnt" > clock frequency vs frequency count ? > > is this ok? Yes. "freq_cnt" has been used by hardware tools which generates the metadata. It is clock frequency count. > >> + >> +/* driver defined endpoints */ >> +#define XRT_MD_NODE_BLP_ROM "drv_ep_blp_rom_00" >> +#define XRT_MD_NODE_DDR_SRSR "drv_ep_ddr_srsr" >> +#define XRT_MD_NODE_FLASH_VSEC "drv_ep_card_flash_program_00" >> +#define XRT_MD_NODE_GOLDEN_VER "drv_ep_golden_ver_00" >> +#define XRT_MD_NODE_MAILBOX_VSEC "drv_ep_mailbox_vsec_00" >> +#define XRT_MD_NODE_MGMT_MAIN "drv_ep_mgmt_main_00" >> +#define XRT_MD_NODE_PLAT_INFO "drv_ep_platform_info_mgmt_00" >> +#define XRT_MD_NODE_PARTITION_INFO_BLP "partition_info_0" >> +#define XRT_MD_NODE_PARTITION_INFO_PLP "partition_info_1" >> +#define XRT_MD_NODE_TEST "drv_ep_test_00" >> +#define XRT_MD_NODE_VSEC "drv_ep_vsec_00" >> +#define XRT_MD_NODE_VSEC_GOLDEN "drv_ep_vsec_golden_00" >> + >> +/* driver defined properties */ >> +#define XRT_MD_PROP_OFFSET "drv_offset" >> +#define XRT_MD_PROP_CLK_FREQ "drv_clock_frequency" >> +#define XRT_MD_PROP_CLK_CNT "drv_clock_frequency_counter" >> +#define XRT_MD_PROP_VBNV "vbnv" >> +#define XRT_MD_PROP_VROM "vrom" >> +#define XRT_MD_PROP_PARTITION_LEVEL "partition_level" >> + >> +struct xrt_md_endpoint { >> + const char *ep_name; >> + u32 bar; >> + u64 bar_off; >> + ulong size; > bar_off changed from long to u64. > > should bar and size both be changed to u64 ? bar is bar index and u32 should be good enough for it. I will change size to u64 and rename 'bar' to 'bar_index'. > >> + char *regmap; > It seems like this is really a compatibility string and not a regmap. Yes. I will rename 'regmap' to 'compat' and 'regmap_ver' to 'compat_ver' > >> + char *regmap_ver; >> +}; >> + >> +/* Note: res_id is defined by leaf driver and must start with 0. */ >> +struct xrt_iores_map { >> + char *res_name; >> + int res_id; >> +}; >> + >> +static inline int xrt_md_res_name2id(const struct xrt_iores_map *res_map, >> + int entry_num, const char *res_name) >> +{ >> + int i; >> + >> + for (i = 0; i < entry_num; i++) { >> + if (!strncmp(res_name, res_map->res_name, strlen(res_map->res_name) + 1)) >> + return res_map->res_id; >> + res_map++; >> + } >> + return -1; >> +} >> + >> +static inline const char * >> +xrt_md_res_id2name(const struct xrt_iores_map *res_map, int entry_num, int id) >> +{ >> + int i; >> + >> + for (i = 0; i < entry_num; i++) { >> + if (res_map->res_id == id) >> + return res_map->res_name; >> + res_map++; >> + } >> + return NULL; >> +} >> + >> +unsigned long xrt_md_size(struct device *dev, const char *blob); >> +int xrt_md_create(struct device *dev, char **blob); >> +char *xrt_md_dup(struct device *dev, const char *blob); >> +int xrt_md_add_endpoint(struct device *dev, char *blob, >> + struct xrt_md_endpoint *ep); >> +int xrt_md_del_endpoint(struct device *dev, char *blob, const char *ep_name, >> + const char *regmap_name); >> +int xrt_md_get_prop(struct device *dev, const char *blob, const char *ep_name, >> + const char *regmap_name, const char *prop, >> + const void **val, int *size); >> +int xrt_md_set_prop(struct device *dev, char *blob, const char *ep_name, >> + const char *regmap_name, const char *prop, >> + const void *val, int size); >> +int xrt_md_copy_endpoint(struct device *dev, char *blob, const char *src_blob, >> + const char *ep_name, const char *regmap_name, >> + const char *new_ep_name); >> +int xrt_md_get_next_endpoint(struct device *dev, const char *blob, >> + const char *ep_name, const char *regmap_name, >> + char **next_ep, char **next_regmap); >> +int xrt_md_get_compatible_endpoint(struct device *dev, const char *blob, >> + const char *regmap_name, const char **ep_name); >> +int xrt_md_find_endpoint(struct device *dev, const char *blob, >> + const char *ep_name, const char *regmap_name, >> + const char **epname); >> +int xrt_md_pack(struct device *dev, char *blob); >> +int xrt_md_get_interface_uuids(struct device *dev, const char *blob, >> + u32 num_uuids, uuid_t *intf_uuids); >> + >> +/* >> + * The firmware provides a 128 bit hash string as a unique id to the >> + * partition/interface. >> + * Existing hw does not yet use the cononical form, so it is necessary to >> + * use a translation function. >> + */ >> +static inline void xrt_md_trans_uuid2str(const uuid_t *uuid, char *uuidstr) >> +{ >> + int i, p; >> + u8 tmp[UUID_SIZE]; >> + >> + BUILD_BUG_ON(UUID_SIZE != 16); >> + export_uuid(tmp, uuid); > ok >> + for (p = 0, i = UUID_SIZE - 1; i >= 0; p++, i--) >> + snprintf(&uuidstr[p * 2], 3, "%02x", tmp[i]); > XMGMT_UUID_STR_LEN is 80. > > This logic say it could be reduced to 33. Sure. I will define it as (UUID_SIZE * 2 + 1). > >> +} >> + >> +static inline int xrt_md_trans_str2uuid(struct device *dev, const char *uuidstr, uuid_t *p_uuid) >> +{ >> + u8 p[UUID_SIZE]; >> + const char *str; >> + char tmp[3] = { 0 }; >> + int i, ret; >> + >> + BUILD_BUG_ON(UUID_SIZE != 16); > Also defined above, do not need to repeat. Will remove. >> + str = uuidstr + strlen(uuidstr) - 2; > needs an underflow check Will add check if (strlen(uuidstr) != UUID_SIZE * 2) return -EINVAL; >> + >> + for (i = 0; i < sizeof(*p_uuid) && str >= uuidstr; i++) { >> + tmp[0] = *str; >> + tmp[1] = *(str + 1); >> + ret = kstrtou8(tmp, 16, &p[i]); >> + if (ret) >> + return -EINVAL; >> + str -= 2; >> + } >> + import_uuid(p_uuid, p); >> + >> + return 0; >> +} >> + >> +#endif >> diff --git a/drivers/fpga/xrt/metadata/metadata.c b/drivers/fpga/xrt/metadata/metadata.c >> new file mode 100644 >> index 000000000000..3b2be50fcb02 >> --- /dev/null >> +++ b/drivers/fpga/xrt/metadata/metadata.c >> @@ -0,0 +1,545 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Xilinx Alveo FPGA Metadata parse APIs >> + * >> + * Copyright (C) 2020-2021 Xilinx, Inc. >> + * >> + * Authors: >> + * Lizhi Hou <Lizhi.Hou@xilinx.com> >> + */ >> + >> +#include <linux/libfdt_env.h> >> +#include "libfdt.h" >> +#include "metadata.h" >> + >> +#define MAX_BLOB_SIZE (4096 * 25) >> +#define MAX_DEPTH 5 > MAX_BLOB_SIZE is defined in keys/trusted-type.h > > General, add a prefix to help avoid conflicts. > > Like > > XRT_MAX_BLOB_SIZE > > etc. Sure. Will add XRT_ > >> + >> +static int xrt_md_setprop(struct device *dev, char *blob, int offset, >> + const char *prop, const void *val, int size) >> +{ >> + int ret; >> + >> + ret = fdt_setprop(blob, offset, prop, val, size); >> + if (ret) >> + dev_err(dev, "failed to set prop %d", ret); >> + >> + return ret; >> +} >> + >> +static int xrt_md_add_node(struct device *dev, char *blob, int parent_offset, >> + const char *ep_name) >> +{ >> + int ret; >> + >> + ret = fdt_add_subnode(blob, parent_offset, ep_name); >> + if (ret < 0 && ret != -FDT_ERR_EXISTS) >> + dev_err(dev, "failed to add node %s. %d", ep_name, ret); >> + >> + return ret; >> +} >> + >> +static int xrt_md_get_endpoint(struct device *dev, const char *blob, >> + const char *ep_name, const char *regmap_name, >> + int *ep_offset) >> +{ >> + const char *name; >> + int offset; >> + >> + for (offset = fdt_next_node(blob, -1, NULL); >> + offset >= 0; >> + offset = fdt_next_node(blob, offset, NULL)) { >> + name = fdt_get_name(blob, offset, NULL); >> + if (!name || strncmp(name, ep_name, strlen(ep_name) + 1)) >> + continue; >> + if (!regmap_name || > regmap_name is known at the start but checked here in the loop. > > this check should be made outside of the loop. Will change. > >> + !fdt_node_check_compatible(blob, offset, regmap_name)) >> + break; >> + } >> + if (offset < 0) >> + return -ENODEV; >> + >> + *ep_offset = offset; >> + >> + return 0; >> +} >> + >> +static inline int xrt_md_get_node(struct device *dev, const char *blob, >> + const char *name, const char *regmap_name, >> + int *offset) >> +{ >> + int ret = 0; >> + >> + if (name) { >> + ret = xrt_md_get_endpoint(dev, blob, name, regmap_name, >> + offset); >> + if (ret) { >> + dev_err(dev, "cannot get node %s, regmap %s, ret = %d", >> + name, regmap_name, ret); > from above regmap_name is sometimes NULL. Will add a check. >> + return -EINVAL; >> + } >> + } else { >> + ret = fdt_next_node(blob, -1, NULL); >> + if (ret < 0) { >> + dev_err(dev, "internal error, ret = %d", ret); >> + return -EINVAL; >> + } >> + *offset = ret; >> + } >> + >> + return 0; >> +} >> + >> +static int xrt_md_overlay(struct device *dev, char *blob, int target, >> + const char *overlay_blob, int overlay_offset, >> + int depth) >> +{ >> + int property, subnode; >> + int ret; > whitespace, looks like tab's after 'int' > > should be consistent with space used elsewhere Will fix. > >> + >> + if (!blob || !overlay_blob) { >> + dev_err(dev, "blob is NULL"); >> + return -EINVAL; >> + } >> + >> + if (depth > MAX_DEPTH) { > ok >> + dev_err(dev, "meta data depth beyond %d", MAX_DEPTH); >> + return -EINVAL; >> + } >> + >> + if (target < 0) { >> + target = fdt_next_node(blob, -1, NULL); >> + if (target < 0) { >> + dev_err(dev, "invalid target"); >> + return -EINVAL; >> + } >> + } >> + if (overlay_offset < 0) { >> + overlay_offset = fdt_next_node(overlay_blob, -1, NULL); >> + if (overlay_offset < 0) { >> + dev_err(dev, "invalid overlay"); >> + return -EINVAL; >> + } >> + } >> + >> + fdt_for_each_property_offset(property, overlay_blob, overlay_offset) { >> + const char *name; >> + const void *prop; >> + int prop_len; >> + >> + prop = fdt_getprop_by_offset(overlay_blob, property, &name, >> + &prop_len); >> + if (!prop || prop_len >= MAX_BLOB_SIZE || prop_len < 0) { >> + dev_err(dev, "internal error"); >> + return -EINVAL; >> + } >> + >> + ret = xrt_md_setprop(dev, blob, target, name, prop, >> + prop_len); >> + if (ret) { >> + dev_err(dev, "setprop failed, ret = %d", ret); >> + return ret; >> + } >> + } >> + >> + fdt_for_each_subnode(subnode, overlay_blob, overlay_offset) { >> + const char *name = fdt_get_name(overlay_blob, subnode, NULL); >> + int nnode; >> + >> + nnode = xrt_md_add_node(dev, blob, target, name); >> + if (nnode == -FDT_ERR_EXISTS) >> + nnode = fdt_subnode_offset(blob, target, name); >> + if (nnode < 0) { >> + dev_err(dev, "add node failed, ret = %d", nnode); >> + return nnode; > This is an offset, not an error code > > return -EINVAL or similar Will fix. > >> + } >> + >> + ret = xrt_md_overlay(dev, blob, nnode, overlay_blob, subnode, depth + 1); >> + if (ret) >> + return ret; >> + } >> + >> + return 0; >> +} >> + >> +unsigned long xrt_md_size(struct device *dev, const char *blob) >> +{ > review fdt_ro_probe. > > fdt_totalsize is signed 32 bit, this conversion to sometimes 64 bit is not necessary. > > at most it should be uint32_t Will use u32. > >> + unsigned long len = (long)fdt_totalsize(blob); >> + >> + if (len > MAX_BLOB_SIZE) >> + return XRT_MD_INVALID_LENGTH; >> + >> + return len; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_size); >> + >> +int xrt_md_create(struct device *dev, char **blob) >> +{ >> + int ret = 0; >> + >> + if (!blob) { >> + dev_err(dev, "blob is NULL"); >> + return -EINVAL; >> + } >> + >> + *blob = vzalloc(MAX_BLOB_SIZE); >> + if (!*blob) >> + return -ENOMEM; >> + >> + ret = fdt_create_empty_tree(*blob, MAX_BLOB_SIZE); >> + if (ret) { >> + dev_err(dev, "format blob failed, ret = %d", ret); >> + goto failed; >> + } >> + >> + ret = fdt_next_node(*blob, -1, NULL); >> + if (ret < 0) { >> + dev_err(dev, "No Node, ret = %d", ret); >> + goto failed; >> + } >> + >> + ret = fdt_add_subnode(*blob, 0, XRT_MD_NODE_ENDPOINTS); >> + if (ret < 0) { > fdt error code will return -EINVAL. >> + dev_err(dev, "add node failed, ret = %d", ret); >> + goto failed; >> + } >> + >> + return 0; >> + >> +failed: >> + vfree(*blob); >> + *blob = NULL; >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_create); >> + >> +char *xrt_md_dup(struct device *dev, const char *blob) >> +{ >> + char *dup_blob; >> + int ret; >> + >> + ret = xrt_md_create(dev, &dup_blob); >> + if (ret) >> + return NULL; >> + ret = xrt_md_overlay(dev, dup_blob, -1, blob, -1, 0); >> + if (ret) { >> + vfree(dup_blob); >> + return NULL; >> + } >> + >> + return dup_blob; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_dup); > Wasn't xrt_md_dup going to be replaced by memcpy ? Looked into this more and found it is not able to replaced by memcpy. The blob read from firmware could be marked as 'read only'. And we need 'read-write' for driver metadata. >> + >> +int xrt_md_del_endpoint(struct device *dev, char *blob, const char *ep_name, >> + const char *regmap_name) >> +{ >> + int ep_offset; >> + int ret; >> + >> + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, &ep_offset); >> + if (ret) { >> + dev_err(dev, "can not find ep %s", ep_name); >> + return -EINVAL; >> + } >> + >> + ret = fdt_del_node(blob, ep_offset); > fdt return code > > Fix these generally. sure. > >> + if (ret) >> + dev_err(dev, "delete node %s failed, ret %d", ep_name, ret); >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_del_endpoint); >> + >> +static int __xrt_md_add_endpoint(struct device *dev, char *blob, >> + struct xrt_md_endpoint *ep, int *offset, >> + const char *parent) >> +{ >> + int parent_offset = 0; >> + u32 val, count = 0; >> + int ep_offset = 0; >> + u64 io_range[2]; >> + char comp[128]; >> + int ret = 0; >> + >> + if (!ep->ep_name) { >> + dev_err(dev, "empty name"); >> + return -EINVAL; >> + } >> + >> + if (parent) { >> + ret = xrt_md_get_endpoint(dev, blob, parent, NULL, &parent_offset); >> + if (ret) { >> + dev_err(dev, "invalid blob, ret = %d", ret); >> + return -EINVAL; >> + } >> + } >> + >> + ep_offset = xrt_md_add_node(dev, blob, parent_offset, ep->ep_name); >> + if (ep_offset < 0) { >> + dev_err(dev, "add endpoint failed, ret = %d", ret); >> + return -EINVAL; >> + } >> + if (offset) >> + *offset = ep_offset; >> + >> + if (ep->size != 0) { >> + val = cpu_to_be32(ep->bar); >> + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_BAR_IDX, >> + &val, sizeof(u32)); >> + if (ret) { >> + dev_err(dev, "set %s failed, ret %d", >> + XRT_MD_PROP_BAR_IDX, ret); >> + goto failed; >> + } >> + io_range[0] = cpu_to_be64((u64)ep->bar_off); >> + io_range[1] = cpu_to_be64((u64)ep->size); > if ep->bar is an index, then rename the element to 'bar_index' sure. >> + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_IO_OFFSET, >> + io_range, sizeof(io_range)); >> + if (ret) { >> + dev_err(dev, "set %s failed, ret %d", >> + XRT_MD_PROP_IO_OFFSET, ret); >> + goto failed; >> + } >> + } >> + >> + if (ep->regmap) { >> + if (ep->regmap_ver) { >> + count = snprintf(comp, sizeof(comp) - 1, > The -1 should be good enough that the if-check below is not needed We do not expect compat string is beyond 127 bytes. I will change to if (count >= sizeof(comp)) So if the converted compat string is beyond 127 bytest, returns error. >> + "%s-%s", ep->regmap, ep->regmap_ver); >> + count++; >> + } >> + if (count > sizeof(comp)) { >> + ret = -EINVAL; >> + goto failed; >> + } >> + >> + count += snprintf(comp + count, sizeof(comp) - count - 1, >> + "%s", ep->regmap); > what happens when only part of regmap is added to comp ? It should never happen and will return error if it is. >> + count++; >> + if (count > sizeof(comp)) { >> + ret = -EINVAL; >> + goto failed; >> + } >> + >> + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_COMPATIBLE, >> + comp, count); >> + if (ret) { >> + dev_err(dev, "set %s failed, ret %d", >> + XRT_MD_PROP_COMPATIBLE, ret); >> + goto failed; >> + } >> + } >> + >> +failed: >> + if (ret) >> + xrt_md_del_endpoint(dev, blob, ep->ep_name, NULL); >> + >> + return ret; >> +} >> + >> +int xrt_md_add_endpoint(struct device *dev, char *blob, >> + struct xrt_md_endpoint *ep) >> +{ >> + return __xrt_md_add_endpoint(dev, blob, ep, NULL, XRT_MD_NODE_ENDPOINTS); >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_add_endpoint); >> + >> +int xrt_md_find_endpoint(struct device *dev, const char *blob, >> + const char *ep_name, const char *regmap_name, >> + const char **epname) >> +{ >> + int offset; >> + int ret; >> + >> + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, >> + &offset); >> + if (!ret && epname) > split this condition, if the call failed, check and return early. sure. >> + *epname = fdt_get_name(blob, offset, NULL); > what happens if fdt_get_name fails ? will add check. >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_find_endpoint); >> + >> +int xrt_md_get_prop(struct device *dev, const char *blob, const char *ep_name, >> + const char *regmap_name, const char *prop, >> + const void **val, int *size) >> +{ >> + int offset; >> + int ret; >> + >> + if (!val) { >> + dev_err(dev, "val is null"); >> + return -EINVAL; > ok >> + } >> + >> + *val = NULL; >> + ret = xrt_md_get_node(dev, blob, ep_name, regmap_name, &offset); >> + if (ret) >> + return ret; >> + >> + *val = fdt_getprop(blob, offset, prop, size); >> + if (!*val) { >> + dev_dbg(dev, "get ep %s, prop %s failed", ep_name, prop); >> + return -EINVAL; >> + } >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_get_prop); >> + >> +int xrt_md_set_prop(struct device *dev, char *blob, >> + const char *ep_name, const char *regmap_name, >> + const char *prop, const void *val, int size) >> +{ >> + int offset; >> + int ret; >> + >> + ret = xrt_md_get_node(dev, blob, ep_name, regmap_name, &offset); >> + if (ret) >> + return ret; >> + >> + ret = xrt_md_setprop(dev, blob, offset, prop, val, size); > ok >> + if (ret) >> + dev_err(dev, "set prop %s failed, ret = %d", prop, ret); >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_set_prop); >> + >> +int xrt_md_copy_endpoint(struct device *dev, char *blob, const char *src_blob, >> + const char *ep_name, const char *regmap_name, >> + const char *new_ep_name) >> +{ >> + const char *newepnm = new_ep_name ? new_ep_name : ep_name; >> + struct xrt_md_endpoint ep = {0}; >> + int offset, target; >> + const char *parent; >> + int ret; >> + >> + ret = xrt_md_get_endpoint(dev, src_blob, ep_name, regmap_name, >> + &offset); >> + if (ret) >> + return -EINVAL; >> + >> + ret = xrt_md_get_endpoint(dev, blob, newepnm, regmap_name, &target); >> + if (ret) { >> + ep.ep_name = newepnm; >> + parent = fdt_parent_offset(src_blob, offset) == 0 ? NULL : XRT_MD_NODE_ENDPOINTS; >> + ret = __xrt_md_add_endpoint(dev, blob, &ep, &target, parent); >> + if (ret) >> + return -EINVAL; >> + } >> + >> + ret = xrt_md_overlay(dev, blob, target, src_blob, offset, 0); >> + if (ret) >> + dev_err(dev, "overlay failed, ret = %d", ret); >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_copy_endpoint); >> + >> +int xrt_md_get_next_endpoint(struct device *dev, const char *blob, >> + const char *ep_name, const char *regmap_name, >> + char **next_ep, char **next_regmap) >> +{ >> + int offset, ret; >> + >> + *next_ep = NULL; >> + *next_regmap = NULL; >> + if (!ep_name) { >> + ret = xrt_md_get_endpoint(dev, blob, XRT_MD_NODE_ENDPOINTS, NULL, >> + &offset); >> + } else { >> + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, >> + &offset); >> + } >> + >> + if (ret) >> + return -EINVAL; >> + >> + offset = ep_name ? fdt_next_subnode(blob, offset) : >> + fdt_first_subnode(blob, offset); > tristate with function calls is harder to follow, convert this to if-else logic Will change. Thanks, Lizhi >> + if (offset < 0) >> + return -EINVAL; >> + >> + *next_ep = (char *)fdt_get_name(blob, offset, NULL); >> + *next_regmap = (char *)fdt_stringlist_get(blob, offset, XRT_MD_PROP_COMPATIBLE, >> + 0, NULL); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_get_next_endpoint); >> + >> +int xrt_md_get_compatible_endpoint(struct device *dev, const char *blob, >> + const char *regmap_name, const char **ep_name) >> +{ >> + int ep_offset; >> + >> + ep_offset = fdt_node_offset_by_compatible(blob, -1, regmap_name); >> + if (ep_offset < 0) { >> + *ep_name = NULL; >> + return -ENOENT; >> + } >> + >> + *ep_name = fdt_get_name(blob, ep_offset, NULL); >> + >> + return 0; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_get_compatible_endpoint); >> + >> +int xrt_md_pack(struct device *dev, char *blob) >> +{ >> + int ret; >> + >> + ret = fdt_pack(blob); >> + if (ret) >> + dev_err(dev, "pack failed %d", ret); >> + >> + return ret; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_pack); >> + >> +int xrt_md_get_interface_uuids(struct device *dev, const char *blob, > ok >> + u32 num_uuids, uuid_t *interface_uuids) >> +{ >> + int offset, count = 0; >> + const char *uuid_str; >> + int ret; >> + >> + ret = xrt_md_get_endpoint(dev, blob, XRT_MD_NODE_INTERFACES, NULL, &offset); >> + if (ret) >> + return -ENOENT; >> + >> + for (offset = fdt_first_subnode(blob, offset); >> + offset >= 0; >> + offset = fdt_next_subnode(blob, offset), count++) { >> + uuid_str = fdt_getprop(blob, offset, XRT_MD_PROP_INTERFACE_UUID, >> + NULL); >> + if (!uuid_str) { >> + dev_err(dev, "empty interface uuid node"); >> + return -EINVAL; >> + } >> + >> + if (!num_uuids) >> + continue; >> + >> + if (count == num_uuids) { > ok > >> + dev_err(dev, "too many interface uuid in blob"); >> + return -EINVAL; >> + } >> + >> + if (interface_uuids && count < num_uuids) { >> + ret = xrt_md_trans_str2uuid(dev, uuid_str, >> + &interface_uuids[count]); >> + if (ret) >> + return -EINVAL; >> + } >> + } >> + if (!count) >> + count = -ENOENT; >> + >> + return count; >> +} >> +EXPORT_SYMBOL_GPL(xrt_md_get_interface_uuids); > Thanks for the changes, > > Tom >
diff --git a/drivers/fpga/xrt/include/metadata.h b/drivers/fpga/xrt/include/metadata.h new file mode 100644 index 000000000000..479e47960c61 --- /dev/null +++ b/drivers/fpga/xrt/include/metadata.h @@ -0,0 +1,233 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020-2021 Xilinx, Inc. + * + * Authors: + * Lizhi Hou <Lizhi.Hou@xilinx.com> + */ + +#ifndef _XRT_METADATA_H +#define _XRT_METADATA_H + +#include <linux/device.h> +#include <linux/vmalloc.h> +#include <linux/uuid.h> + +#define XRT_MD_INVALID_LENGTH (~0UL) + +/* metadata properties */ +#define XRT_MD_PROP_BAR_IDX "pcie_bar_mapping" +#define XRT_MD_PROP_COMPATIBLE "compatible" +#define XRT_MD_PROP_HWICAP "axi_hwicap" +#define XRT_MD_PROP_INTERFACE_UUID "interface_uuid" +#define XRT_MD_PROP_INTERRUPTS "interrupts" +#define XRT_MD_PROP_IO_OFFSET "reg" +#define XRT_MD_PROP_LOGIC_UUID "logic_uuid" +#define XRT_MD_PROP_PDI_CONFIG "pdi_config_mem" +#define XRT_MD_PROP_PF_NUM "pcie_physical_function" +#define XRT_MD_PROP_VERSION_MAJOR "firmware_version_major" + +/* non IP nodes */ +#define XRT_MD_NODE_ENDPOINTS "addressable_endpoints" +#define XRT_MD_NODE_FIRMWARE "firmware" +#define XRT_MD_NODE_INTERFACES "interfaces" +#define XRT_MD_NODE_PARTITION_INFO "partition_info" + +/* + * IP nodes + * AF: AXI Firewall + * CMC: Card Management Controller + * ERT: Embedded Runtime + * PLP: Provider Reconfigurable Partition + * ULP: User Reconfigurable Partition + */ +#define XRT_MD_NODE_ADDR_TRANSLATOR "ep_remap_data_c2h_00" +#define XRT_MD_NODE_AF_BLP_CTRL_MGMT "ep_firewall_blp_ctrl_mgmt_00" +#define XRT_MD_NODE_AF_BLP_CTRL_USER "ep_firewall_blp_ctrl_user_00" +#define XRT_MD_NODE_AF_CTRL_DEBUG "ep_firewall_ctrl_debug_00" +#define XRT_MD_NODE_AF_CTRL_MGMT "ep_firewall_ctrl_mgmt_00" +#define XRT_MD_NODE_AF_CTRL_USER "ep_firewall_ctrl_user_00" +#define XRT_MD_NODE_AF_DATA_C2H "ep_firewall_data_c2h_00" +#define XRT_MD_NODE_AF_DATA_H2C "ep_firewall_data_h2c_00" +#define XRT_MD_NODE_AF_DATA_M2M "ep_firewall_data_m2m_00" +#define XRT_MD_NODE_AF_DATA_P2P "ep_firewall_data_p2p_00" +#define XRT_MD_NODE_CLKFREQ_HBM "ep_freq_cnt_aclk_hbm_00" +#define XRT_MD_NODE_CLKFREQ_K1 "ep_freq_cnt_aclk_kernel_00" +#define XRT_MD_NODE_CLKFREQ_K2 "ep_freq_cnt_aclk_kernel_01" +#define XRT_MD_NODE_CLK_KERNEL1 "ep_aclk_kernel_00" +#define XRT_MD_NODE_CLK_KERNEL2 "ep_aclk_kernel_01" +#define XRT_MD_NODE_CLK_KERNEL3 "ep_aclk_hbm_00" +#define XRT_MD_NODE_CLK_SHUTDOWN "ep_aclk_shutdown_00" +#define XRT_MD_NODE_CMC_FW_MEM "ep_cmc_firmware_mem_00" +#define XRT_MD_NODE_CMC_MUTEX "ep_cmc_mutex_00" +#define XRT_MD_NODE_CMC_REG "ep_cmc_regmap_00" +#define XRT_MD_NODE_CMC_RESET "ep_cmc_reset_00" +#define XRT_MD_NODE_DDR_CALIB "ep_ddr_mem_calib_00" +#define XRT_MD_NODE_DDR4_RESET_GATE "ep_ddr_mem_srsr_gate_00" +#define XRT_MD_NODE_ERT_BASE "ep_ert_base_address_00" +#define XRT_MD_NODE_ERT_CQ_MGMT "ep_ert_command_queue_mgmt_00" +#define XRT_MD_NODE_ERT_CQ_USER "ep_ert_command_queue_user_00" +#define XRT_MD_NODE_ERT_FW_MEM "ep_ert_firmware_mem_00" +#define XRT_MD_NODE_ERT_RESET "ep_ert_reset_00" +#define XRT_MD_NODE_ERT_SCHED "ep_ert_sched_00" +#define XRT_MD_NODE_FLASH "ep_card_flash_program_00" +#define XRT_MD_NODE_FPGA_CONFIG "ep_fpga_configuration_00" +#define XRT_MD_NODE_GAPPING "ep_gapping_demand_00" +#define XRT_MD_NODE_GATE_PLP "ep_pr_isolate_plp_00" +#define XRT_MD_NODE_GATE_ULP "ep_pr_isolate_ulp_00" +#define XRT_MD_NODE_KDMA_CTRL "ep_kdma_ctrl_00" +#define XRT_MD_NODE_MAILBOX_MGMT "ep_mailbox_mgmt_00" +#define XRT_MD_NODE_MAILBOX_USER "ep_mailbox_user_00" +#define XRT_MD_NODE_MAILBOX_XRT "ep_mailbox_user_to_ert_00" +#define XRT_MD_NODE_MSIX "ep_msix_00" +#define XRT_MD_NODE_P2P "ep_p2p_00" +#define XRT_MD_NODE_PCIE_MON "ep_pcie_link_mon_00" +#define XRT_MD_NODE_PMC_INTR "ep_pmc_intr_00" +#define XRT_MD_NODE_PMC_MUX "ep_pmc_mux_00" +#define XRT_MD_NODE_QDMA "ep_qdma_00" +#define XRT_MD_NODE_QDMA4 "ep_qdma4_00" +#define XRT_MD_NODE_REMAP_P2P "ep_remap_p2p_00" +#define XRT_MD_NODE_STM "ep_stream_traffic_manager_00" +#define XRT_MD_NODE_STM4 "ep_stream_traffic_manager4_00" +#define XRT_MD_NODE_SYSMON "ep_cmp_sysmon_00" +#define XRT_MD_NODE_XDMA "ep_xdma_00" +#define XRT_MD_NODE_XVC_PUB "ep_debug_bscan_user_00" +#define XRT_MD_NODE_XVC_PRI "ep_debug_bscan_mgmt_00" +#define XRT_MD_NODE_UCS_CONTROL_STATUS "ep_ucs_control_status_00" + +/* endpoint regmaps */ +#define XRT_MD_REGMAP_DDR_SRSR "drv_ddr_srsr" +#define XRT_MD_REGMAP_CLKFREQ "freq_cnt" + +/* driver defined endpoints */ +#define XRT_MD_NODE_BLP_ROM "drv_ep_blp_rom_00" +#define XRT_MD_NODE_DDR_SRSR "drv_ep_ddr_srsr" +#define XRT_MD_NODE_FLASH_VSEC "drv_ep_card_flash_program_00" +#define XRT_MD_NODE_GOLDEN_VER "drv_ep_golden_ver_00" +#define XRT_MD_NODE_MAILBOX_VSEC "drv_ep_mailbox_vsec_00" +#define XRT_MD_NODE_MGMT_MAIN "drv_ep_mgmt_main_00" +#define XRT_MD_NODE_PLAT_INFO "drv_ep_platform_info_mgmt_00" +#define XRT_MD_NODE_PARTITION_INFO_BLP "partition_info_0" +#define XRT_MD_NODE_PARTITION_INFO_PLP "partition_info_1" +#define XRT_MD_NODE_TEST "drv_ep_test_00" +#define XRT_MD_NODE_VSEC "drv_ep_vsec_00" +#define XRT_MD_NODE_VSEC_GOLDEN "drv_ep_vsec_golden_00" + +/* driver defined properties */ +#define XRT_MD_PROP_OFFSET "drv_offset" +#define XRT_MD_PROP_CLK_FREQ "drv_clock_frequency" +#define XRT_MD_PROP_CLK_CNT "drv_clock_frequency_counter" +#define XRT_MD_PROP_VBNV "vbnv" +#define XRT_MD_PROP_VROM "vrom" +#define XRT_MD_PROP_PARTITION_LEVEL "partition_level" + +struct xrt_md_endpoint { + const char *ep_name; + u32 bar; + u64 bar_off; + ulong size; + char *regmap; + char *regmap_ver; +}; + +/* Note: res_id is defined by leaf driver and must start with 0. */ +struct xrt_iores_map { + char *res_name; + int res_id; +}; + +static inline int xrt_md_res_name2id(const struct xrt_iores_map *res_map, + int entry_num, const char *res_name) +{ + int i; + + for (i = 0; i < entry_num; i++) { + if (!strncmp(res_name, res_map->res_name, strlen(res_map->res_name) + 1)) + return res_map->res_id; + res_map++; + } + return -1; +} + +static inline const char * +xrt_md_res_id2name(const struct xrt_iores_map *res_map, int entry_num, int id) +{ + int i; + + for (i = 0; i < entry_num; i++) { + if (res_map->res_id == id) + return res_map->res_name; + res_map++; + } + return NULL; +} + +unsigned long xrt_md_size(struct device *dev, const char *blob); +int xrt_md_create(struct device *dev, char **blob); +char *xrt_md_dup(struct device *dev, const char *blob); +int xrt_md_add_endpoint(struct device *dev, char *blob, + struct xrt_md_endpoint *ep); +int xrt_md_del_endpoint(struct device *dev, char *blob, const char *ep_name, + const char *regmap_name); +int xrt_md_get_prop(struct device *dev, const char *blob, const char *ep_name, + const char *regmap_name, const char *prop, + const void **val, int *size); +int xrt_md_set_prop(struct device *dev, char *blob, const char *ep_name, + const char *regmap_name, const char *prop, + const void *val, int size); +int xrt_md_copy_endpoint(struct device *dev, char *blob, const char *src_blob, + const char *ep_name, const char *regmap_name, + const char *new_ep_name); +int xrt_md_get_next_endpoint(struct device *dev, const char *blob, + const char *ep_name, const char *regmap_name, + char **next_ep, char **next_regmap); +int xrt_md_get_compatible_endpoint(struct device *dev, const char *blob, + const char *regmap_name, const char **ep_name); +int xrt_md_find_endpoint(struct device *dev, const char *blob, + const char *ep_name, const char *regmap_name, + const char **epname); +int xrt_md_pack(struct device *dev, char *blob); +int xrt_md_get_interface_uuids(struct device *dev, const char *blob, + u32 num_uuids, uuid_t *intf_uuids); + +/* + * The firmware provides a 128 bit hash string as a unique id to the + * partition/interface. + * Existing hw does not yet use the cononical form, so it is necessary to + * use a translation function. + */ +static inline void xrt_md_trans_uuid2str(const uuid_t *uuid, char *uuidstr) +{ + int i, p; + u8 tmp[UUID_SIZE]; + + BUILD_BUG_ON(UUID_SIZE != 16); + export_uuid(tmp, uuid); + for (p = 0, i = UUID_SIZE - 1; i >= 0; p++, i--) + snprintf(&uuidstr[p * 2], 3, "%02x", tmp[i]); +} + +static inline int xrt_md_trans_str2uuid(struct device *dev, const char *uuidstr, uuid_t *p_uuid) +{ + u8 p[UUID_SIZE]; + const char *str; + char tmp[3] = { 0 }; + int i, ret; + + BUILD_BUG_ON(UUID_SIZE != 16); + str = uuidstr + strlen(uuidstr) - 2; + + for (i = 0; i < sizeof(*p_uuid) && str >= uuidstr; i++) { + tmp[0] = *str; + tmp[1] = *(str + 1); + ret = kstrtou8(tmp, 16, &p[i]); + if (ret) + return -EINVAL; + str -= 2; + } + import_uuid(p_uuid, p); + + return 0; +} + +#endif diff --git a/drivers/fpga/xrt/metadata/metadata.c b/drivers/fpga/xrt/metadata/metadata.c new file mode 100644 index 000000000000..3b2be50fcb02 --- /dev/null +++ b/drivers/fpga/xrt/metadata/metadata.c @@ -0,0 +1,545 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Xilinx Alveo FPGA Metadata parse APIs + * + * Copyright (C) 2020-2021 Xilinx, Inc. + * + * Authors: + * Lizhi Hou <Lizhi.Hou@xilinx.com> + */ + +#include <linux/libfdt_env.h> +#include "libfdt.h" +#include "metadata.h" + +#define MAX_BLOB_SIZE (4096 * 25) +#define MAX_DEPTH 5 + +static int xrt_md_setprop(struct device *dev, char *blob, int offset, + const char *prop, const void *val, int size) +{ + int ret; + + ret = fdt_setprop(blob, offset, prop, val, size); + if (ret) + dev_err(dev, "failed to set prop %d", ret); + + return ret; +} + +static int xrt_md_add_node(struct device *dev, char *blob, int parent_offset, + const char *ep_name) +{ + int ret; + + ret = fdt_add_subnode(blob, parent_offset, ep_name); + if (ret < 0 && ret != -FDT_ERR_EXISTS) + dev_err(dev, "failed to add node %s. %d", ep_name, ret); + + return ret; +} + +static int xrt_md_get_endpoint(struct device *dev, const char *blob, + const char *ep_name, const char *regmap_name, + int *ep_offset) +{ + const char *name; + int offset; + + for (offset = fdt_next_node(blob, -1, NULL); + offset >= 0; + offset = fdt_next_node(blob, offset, NULL)) { + name = fdt_get_name(blob, offset, NULL); + if (!name || strncmp(name, ep_name, strlen(ep_name) + 1)) + continue; + if (!regmap_name || + !fdt_node_check_compatible(blob, offset, regmap_name)) + break; + } + if (offset < 0) + return -ENODEV; + + *ep_offset = offset; + + return 0; +} + +static inline int xrt_md_get_node(struct device *dev, const char *blob, + const char *name, const char *regmap_name, + int *offset) +{ + int ret = 0; + + if (name) { + ret = xrt_md_get_endpoint(dev, blob, name, regmap_name, + offset); + if (ret) { + dev_err(dev, "cannot get node %s, regmap %s, ret = %d", + name, regmap_name, ret); + return -EINVAL; + } + } else { + ret = fdt_next_node(blob, -1, NULL); + if (ret < 0) { + dev_err(dev, "internal error, ret = %d", ret); + return -EINVAL; + } + *offset = ret; + } + + return 0; +} + +static int xrt_md_overlay(struct device *dev, char *blob, int target, + const char *overlay_blob, int overlay_offset, + int depth) +{ + int property, subnode; + int ret; + + if (!blob || !overlay_blob) { + dev_err(dev, "blob is NULL"); + return -EINVAL; + } + + if (depth > MAX_DEPTH) { + dev_err(dev, "meta data depth beyond %d", MAX_DEPTH); + return -EINVAL; + } + + if (target < 0) { + target = fdt_next_node(blob, -1, NULL); + if (target < 0) { + dev_err(dev, "invalid target"); + return -EINVAL; + } + } + if (overlay_offset < 0) { + overlay_offset = fdt_next_node(overlay_blob, -1, NULL); + if (overlay_offset < 0) { + dev_err(dev, "invalid overlay"); + return -EINVAL; + } + } + + fdt_for_each_property_offset(property, overlay_blob, overlay_offset) { + const char *name; + const void *prop; + int prop_len; + + prop = fdt_getprop_by_offset(overlay_blob, property, &name, + &prop_len); + if (!prop || prop_len >= MAX_BLOB_SIZE || prop_len < 0) { + dev_err(dev, "internal error"); + return -EINVAL; + } + + ret = xrt_md_setprop(dev, blob, target, name, prop, + prop_len); + if (ret) { + dev_err(dev, "setprop failed, ret = %d", ret); + return ret; + } + } + + fdt_for_each_subnode(subnode, overlay_blob, overlay_offset) { + const char *name = fdt_get_name(overlay_blob, subnode, NULL); + int nnode; + + nnode = xrt_md_add_node(dev, blob, target, name); + if (nnode == -FDT_ERR_EXISTS) + nnode = fdt_subnode_offset(blob, target, name); + if (nnode < 0) { + dev_err(dev, "add node failed, ret = %d", nnode); + return nnode; + } + + ret = xrt_md_overlay(dev, blob, nnode, overlay_blob, subnode, depth + 1); + if (ret) + return ret; + } + + return 0; +} + +unsigned long xrt_md_size(struct device *dev, const char *blob) +{ + unsigned long len = (long)fdt_totalsize(blob); + + if (len > MAX_BLOB_SIZE) + return XRT_MD_INVALID_LENGTH; + + return len; +} +EXPORT_SYMBOL_GPL(xrt_md_size); + +int xrt_md_create(struct device *dev, char **blob) +{ + int ret = 0; + + if (!blob) { + dev_err(dev, "blob is NULL"); + return -EINVAL; + } + + *blob = vzalloc(MAX_BLOB_SIZE); + if (!*blob) + return -ENOMEM; + + ret = fdt_create_empty_tree(*blob, MAX_BLOB_SIZE); + if (ret) { + dev_err(dev, "format blob failed, ret = %d", ret); + goto failed; + } + + ret = fdt_next_node(*blob, -1, NULL); + if (ret < 0) { + dev_err(dev, "No Node, ret = %d", ret); + goto failed; + } + + ret = fdt_add_subnode(*blob, 0, XRT_MD_NODE_ENDPOINTS); + if (ret < 0) { + dev_err(dev, "add node failed, ret = %d", ret); + goto failed; + } + + return 0; + +failed: + vfree(*blob); + *blob = NULL; + + return ret; +} +EXPORT_SYMBOL_GPL(xrt_md_create); + +char *xrt_md_dup(struct device *dev, const char *blob) +{ + char *dup_blob; + int ret; + + ret = xrt_md_create(dev, &dup_blob); + if (ret) + return NULL; + ret = xrt_md_overlay(dev, dup_blob, -1, blob, -1, 0); + if (ret) { + vfree(dup_blob); + return NULL; + } + + return dup_blob; +} +EXPORT_SYMBOL_GPL(xrt_md_dup); + +int xrt_md_del_endpoint(struct device *dev, char *blob, const char *ep_name, + const char *regmap_name) +{ + int ep_offset; + int ret; + + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, &ep_offset); + if (ret) { + dev_err(dev, "can not find ep %s", ep_name); + return -EINVAL; + } + + ret = fdt_del_node(blob, ep_offset); + if (ret) + dev_err(dev, "delete node %s failed, ret %d", ep_name, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(xrt_md_del_endpoint); + +static int __xrt_md_add_endpoint(struct device *dev, char *blob, + struct xrt_md_endpoint *ep, int *offset, + const char *parent) +{ + int parent_offset = 0; + u32 val, count = 0; + int ep_offset = 0; + u64 io_range[2]; + char comp[128]; + int ret = 0; + + if (!ep->ep_name) { + dev_err(dev, "empty name"); + return -EINVAL; + } + + if (parent) { + ret = xrt_md_get_endpoint(dev, blob, parent, NULL, &parent_offset); + if (ret) { + dev_err(dev, "invalid blob, ret = %d", ret); + return -EINVAL; + } + } + + ep_offset = xrt_md_add_node(dev, blob, parent_offset, ep->ep_name); + if (ep_offset < 0) { + dev_err(dev, "add endpoint failed, ret = %d", ret); + return -EINVAL; + } + if (offset) + *offset = ep_offset; + + if (ep->size != 0) { + val = cpu_to_be32(ep->bar); + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_BAR_IDX, + &val, sizeof(u32)); + if (ret) { + dev_err(dev, "set %s failed, ret %d", + XRT_MD_PROP_BAR_IDX, ret); + goto failed; + } + io_range[0] = cpu_to_be64((u64)ep->bar_off); + io_range[1] = cpu_to_be64((u64)ep->size); + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_IO_OFFSET, + io_range, sizeof(io_range)); + if (ret) { + dev_err(dev, "set %s failed, ret %d", + XRT_MD_PROP_IO_OFFSET, ret); + goto failed; + } + } + + if (ep->regmap) { + if (ep->regmap_ver) { + count = snprintf(comp, sizeof(comp) - 1, + "%s-%s", ep->regmap, ep->regmap_ver); + count++; + } + if (count > sizeof(comp)) { + ret = -EINVAL; + goto failed; + } + + count += snprintf(comp + count, sizeof(comp) - count - 1, + "%s", ep->regmap); + count++; + if (count > sizeof(comp)) { + ret = -EINVAL; + goto failed; + } + + ret = xrt_md_setprop(dev, blob, ep_offset, XRT_MD_PROP_COMPATIBLE, + comp, count); + if (ret) { + dev_err(dev, "set %s failed, ret %d", + XRT_MD_PROP_COMPATIBLE, ret); + goto failed; + } + } + +failed: + if (ret) + xrt_md_del_endpoint(dev, blob, ep->ep_name, NULL); + + return ret; +} + +int xrt_md_add_endpoint(struct device *dev, char *blob, + struct xrt_md_endpoint *ep) +{ + return __xrt_md_add_endpoint(dev, blob, ep, NULL, XRT_MD_NODE_ENDPOINTS); +} +EXPORT_SYMBOL_GPL(xrt_md_add_endpoint); + +int xrt_md_find_endpoint(struct device *dev, const char *blob, + const char *ep_name, const char *regmap_name, + const char **epname) +{ + int offset; + int ret; + + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, + &offset); + if (!ret && epname) + *epname = fdt_get_name(blob, offset, NULL); + + return ret; +} +EXPORT_SYMBOL_GPL(xrt_md_find_endpoint); + +int xrt_md_get_prop(struct device *dev, const char *blob, const char *ep_name, + const char *regmap_name, const char *prop, + const void **val, int *size) +{ + int offset; + int ret; + + if (!val) { + dev_err(dev, "val is null"); + return -EINVAL; + } + + *val = NULL; + ret = xrt_md_get_node(dev, blob, ep_name, regmap_name, &offset); + if (ret) + return ret; + + *val = fdt_getprop(blob, offset, prop, size); + if (!*val) { + dev_dbg(dev, "get ep %s, prop %s failed", ep_name, prop); + return -EINVAL; + } + + return 0; +} +EXPORT_SYMBOL_GPL(xrt_md_get_prop); + +int xrt_md_set_prop(struct device *dev, char *blob, + const char *ep_name, const char *regmap_name, + const char *prop, const void *val, int size) +{ + int offset; + int ret; + + ret = xrt_md_get_node(dev, blob, ep_name, regmap_name, &offset); + if (ret) + return ret; + + ret = xrt_md_setprop(dev, blob, offset, prop, val, size); + if (ret) + dev_err(dev, "set prop %s failed, ret = %d", prop, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(xrt_md_set_prop); + +int xrt_md_copy_endpoint(struct device *dev, char *blob, const char *src_blob, + const char *ep_name, const char *regmap_name, + const char *new_ep_name) +{ + const char *newepnm = new_ep_name ? new_ep_name : ep_name; + struct xrt_md_endpoint ep = {0}; + int offset, target; + const char *parent; + int ret; + + ret = xrt_md_get_endpoint(dev, src_blob, ep_name, regmap_name, + &offset); + if (ret) + return -EINVAL; + + ret = xrt_md_get_endpoint(dev, blob, newepnm, regmap_name, &target); + if (ret) { + ep.ep_name = newepnm; + parent = fdt_parent_offset(src_blob, offset) == 0 ? NULL : XRT_MD_NODE_ENDPOINTS; + ret = __xrt_md_add_endpoint(dev, blob, &ep, &target, parent); + if (ret) + return -EINVAL; + } + + ret = xrt_md_overlay(dev, blob, target, src_blob, offset, 0); + if (ret) + dev_err(dev, "overlay failed, ret = %d", ret); + + return ret; +} +EXPORT_SYMBOL_GPL(xrt_md_copy_endpoint); + +int xrt_md_get_next_endpoint(struct device *dev, const char *blob, + const char *ep_name, const char *regmap_name, + char **next_ep, char **next_regmap) +{ + int offset, ret; + + *next_ep = NULL; + *next_regmap = NULL; + if (!ep_name) { + ret = xrt_md_get_endpoint(dev, blob, XRT_MD_NODE_ENDPOINTS, NULL, + &offset); + } else { + ret = xrt_md_get_endpoint(dev, blob, ep_name, regmap_name, + &offset); + } + + if (ret) + return -EINVAL; + + offset = ep_name ? fdt_next_subnode(blob, offset) : + fdt_first_subnode(blob, offset); + if (offset < 0) + return -EINVAL; + + *next_ep = (char *)fdt_get_name(blob, offset, NULL); + *next_regmap = (char *)fdt_stringlist_get(blob, offset, XRT_MD_PROP_COMPATIBLE, + 0, NULL); + + return 0; +} +EXPORT_SYMBOL_GPL(xrt_md_get_next_endpoint); + +int xrt_md_get_compatible_endpoint(struct device *dev, const char *blob, + const char *regmap_name, const char **ep_name) +{ + int ep_offset; + + ep_offset = fdt_node_offset_by_compatible(blob, -1, regmap_name); + if (ep_offset < 0) { + *ep_name = NULL; + return -ENOENT; + } + + *ep_name = fdt_get_name(blob, ep_offset, NULL); + + return 0; +} +EXPORT_SYMBOL_GPL(xrt_md_get_compatible_endpoint); + +int xrt_md_pack(struct device *dev, char *blob) +{ + int ret; + + ret = fdt_pack(blob); + if (ret) + dev_err(dev, "pack failed %d", ret); + + return ret; +} +EXPORT_SYMBOL_GPL(xrt_md_pack); + +int xrt_md_get_interface_uuids(struct device *dev, const char *blob, + u32 num_uuids, uuid_t *interface_uuids) +{ + int offset, count = 0; + const char *uuid_str; + int ret; + + ret = xrt_md_get_endpoint(dev, blob, XRT_MD_NODE_INTERFACES, NULL, &offset); + if (ret) + return -ENOENT; + + for (offset = fdt_first_subnode(blob, offset); + offset >= 0; + offset = fdt_next_subnode(blob, offset), count++) { + uuid_str = fdt_getprop(blob, offset, XRT_MD_PROP_INTERFACE_UUID, + NULL); + if (!uuid_str) { + dev_err(dev, "empty interface uuid node"); + return -EINVAL; + } + + if (!num_uuids) + continue; + + if (count == num_uuids) { + dev_err(dev, "too many interface uuid in blob"); + return -EINVAL; + } + + if (interface_uuids && count < num_uuids) { + ret = xrt_md_trans_str2uuid(dev, uuid_str, + &interface_uuids[count]); + if (ret) + return -EINVAL; + } + } + if (!count) + count = -ENOENT; + + return count; +} +EXPORT_SYMBOL_GPL(xrt_md_get_interface_uuids);