| Message ID | 20210608031535.3651-2-qiangqing.zhang@nxp.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | net: phy: add dt property for realtek phy | expand |
On Tue, Jun 08, 2021 at 11:15:32AM +0800, Joakim Zhang wrote: > Add binding for realtek rtl82xx phy. > > Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> > --- > .../bindings/net/realtek,rtl82xx.yaml | 45 +++++++++++++++++++ > 1 file changed, 45 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml > > diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml > new file mode 100644 > index 000000000000..bb94a2388520 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml > @@ -0,0 +1,45 @@ > +# SPDX-License-Identifier: GPL-2.0+ > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Realtek RTL82xx PHY > + > +maintainers: > + - Andrew Lunn <andrew@lunn.ch> > + - Florian Fainelli <f.fainelli@gmail.com> > + - Heiner Kallweit <hkallweit1@gmail.com> > + > +description: > + Bindings for Realtek RTL82xx PHYs > + > +allOf: > + - $ref: ethernet-phy.yaml# > + > +properties: > + realtek,clkout-disable: > + type: boolean > + description: > + Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset. > + > + Extra blank line. > + realtek,aldps-enable: > + type: boolean > + description: > + Enable ALDPS mode, ALDPS mode default is disabled after hardware reset. > + > +unevaluatedProperties: false > + > +examples: > + - | > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethphy1: ethernet-phy@1 { > + reg = <1>; > + realtek,clkout-disable; > + realtek,aldps-enable; The schema here will never be applied because there is nothing to match on to determine which nodes it is valid. This should have a compatible (because ethernet phys are not special). Rob
diff --git a/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml new file mode 100644 index 000000000000..bb94a2388520 --- /dev/null +++ b/Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0+ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/realtek,rtl82xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek RTL82xx PHY + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + - Florian Fainelli <f.fainelli@gmail.com> + - Heiner Kallweit <hkallweit1@gmail.com> + +description: + Bindings for Realtek RTL82xx PHYs + +allOf: + - $ref: ethernet-phy.yaml# + +properties: + realtek,clkout-disable: + type: boolean + description: + Disable CLKOUT clock, CLKOUT clock default is enabled after hardware reset. + + + realtek,aldps-enable: + type: boolean + description: + Enable ALDPS mode, ALDPS mode default is disabled after hardware reset. + +unevaluatedProperties: false + +examples: + - | + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@1 { + reg = <1>; + realtek,clkout-disable; + realtek,aldps-enable; + }; + };
Add binding for realtek rtl82xx phy. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> --- .../bindings/net/realtek,rtl82xx.yaml | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml