diff mbox series

[v2,28/29] iommu/mediatek: Backup/restore regsiters for multi banks

Message ID 20210813065324.29220-29-yong.wu@mediatek.com
State New
Headers show
Series MT8195 IOMMU SUPPORT | expand

Commit Message

Yong Wu (吴勇) Aug. 13, 2021, 6:53 a.m. UTC
Each bank has some independent registers. thus backup/restore them for
each a bank when suspend and resume.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 39 +++++++++++++++++++++++++++------------
 drivers/iommu/mtk_iommu.h | 14 +++++++++++---
 2 files changed, 38 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 142ee8f3a560..3d474eedce3e 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -1135,16 +1135,23 @@  static int __maybe_unused mtk_iommu_runtime_suspend(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
 	struct mtk_iommu_suspend_reg *reg = &data->reg;
-	void __iomem *base = data->bank[0].base;
+	void __iomem *base;
+	int i = 0;
 
+	base = data->bank[i].base;
 	reg->wr_len_ctrl = readl_relaxed(base + REG_MMU_WR_LEN_CTRL);
 	reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
 	reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
 	reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
-	reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
-	reg->int_main_control = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
-	reg->ivrp_paddr = readl_relaxed(base + REG_MMU_IVRP_PADDR);
 	reg->vld_pa_rng = readl_relaxed(base + REG_MMU_VLD_PA_RNG);
+	do {
+		if (!data->plat_data->bank_enable[i])
+			continue;
+		base = data->bank[i].base;
+		reg->int_control[i] = readl_relaxed(base + REG_MMU_INT_CONTROL0);
+		reg->int_main_control[i] = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
+		reg->ivrp_paddr[i] = readl_relaxed(base + REG_MMU_IVRP_PADDR);
+	} while (++i < data->plat_data->bank_nr);
 	clk_disable_unprepare(data->bclk);
 	return 0;
 }
@@ -1153,9 +1160,9 @@  static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
 {
 	struct mtk_iommu_data *data = dev_get_drvdata(dev);
 	struct mtk_iommu_suspend_reg *reg = &data->reg;
-	struct mtk_iommu_domain *m4u_dom = data->bank[0].m4u_dom;
-	void __iomem *base = data->bank[0].base;
-	int ret;
+	struct mtk_iommu_domain *m4u_dom;
+	void __iomem *base;
+	int ret, i = 0;
 
 	ret = clk_prepare_enable(data->bclk);
 	if (ret) {
@@ -1167,18 +1174,26 @@  static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
 	 * Uppon first resume, only enable the clk and return, since the values of the
 	 * registers are not yet set.
 	 */
-	if (!m4u_dom)
+	if (!reg->wr_len_ctrl)
 		return 0;
 
+	base = data->bank[i].base;
 	writel_relaxed(reg->wr_len_ctrl, base + REG_MMU_WR_LEN_CTRL);
 	writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
 	writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
 	writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
-	writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
-	writel_relaxed(reg->int_main_control, base + REG_MMU_INT_MAIN_CONTROL);
-	writel_relaxed(reg->ivrp_paddr, base + REG_MMU_IVRP_PADDR);
 	writel_relaxed(reg->vld_pa_rng, base + REG_MMU_VLD_PA_RNG);
-	writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK, base + REG_MMU_PT_BASE_ADDR);
+	do {
+		m4u_dom = data->bank[i].m4u_dom;
+		if (!data->plat_data->bank_enable[i] || !m4u_dom)
+			continue;
+		base = data->bank[i].base;
+		writel_relaxed(reg->int_control[i], base + REG_MMU_INT_CONTROL0);
+		writel_relaxed(reg->int_main_control[i], base + REG_MMU_INT_MAIN_CONTROL);
+		writel_relaxed(reg->ivrp_paddr[i], base + REG_MMU_IVRP_PADDR);
+		writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
+		       base + REG_MMU_PT_BASE_ADDR);
+	} while (++i < data->plat_data->bank_nr);
 	return 0;
 }
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index 905d8740dbcf..279c6c3ee56f 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -33,11 +33,19 @@  struct mtk_iommu_suspend_reg {
 	};
 	u32				dcm_dis;
 	u32				ctrl_reg;
-	u32				int_control0;
-	u32				int_main_control;
-	u32				ivrp_paddr;
 	u32				vld_pa_rng;
 	u32				wr_len_ctrl;
+	union {
+		struct { /* only for gen1 */
+			u32		int_control0;
+		};
+
+		struct { /* only for gen2 that support multi-banks */
+			u32		int_control[MTK_IOMMU_BANK_MAX];
+			u32		int_main_control[MTK_IOMMU_BANK_MAX];
+			u32		ivrp_paddr[MTK_IOMMU_BANK_MAX];
+		};
+	};
 };
 
 enum mtk_iommu_plat {